PGENETICS-D-25-00687

C. elegans SAS-1 ensures centriole integrity and ciliary function, and operates with SSNA-1

PLOS Genetics

Dear Dr. Gonczy,

Thank you for tranfering your manuscript from Reviewers commons to PLOS Genetics. We would be pleased to receive a revised version of your manuscript based on your detailed plan to addresses the points raised during the review process.

Please submit your revised manuscript within 60 days Aug 15 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosgenetics@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pgenetics/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

* A rebuttal letter that responds to each point raised by the editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'. This file does not need to include responses to any formatting updates and technical items listed in the 'Journal Requirements' section below.

* A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.

* An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, competing interests statement, or data availability statement, please make these updates within the submission form at the time of resubmission. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

We look forward to receiving your revised manuscript.

Kind regards,

Nathalie Pujol

Academic Editor

PLOS Genetics

Pablo Wappner

Section Editor

PLOS Genetics

Aimée Dudley

Editor-in-Chief

PLOS Genetics

Anne Goriely

Editor-in-Chief

PLOS Genetics

Journal Requirements:

1) We ask that a manuscript source file is provided at Revision. Please upload your manuscript file as a .doc, .docx, .rtf or .tex. If you are providing a .tex file, please upload it under the item type u2018LaTeX Source Fileu2019 and leave your .pdf version as the item type u2018Manuscriptu2019.

2) Please provide an Author Summary. This should appear in your manuscript between the Abstract (if applicable) and the Introduction, and should be 150-200 words long. The aim should be to make your findings accessible to a wide audience that includes both scientists and non-scientists. Sample summaries can be found on our website under Submission Guidelines:

https://journals.plos.org/plosgenetics/s/submission-guidelines#loc-parts-of-a-submission

3) Please upload all main figures as separate Figure files in .tif or .eps format. For more information about how to convert and format your figure files please see our guidelines: 

https://journals.plos.org/plosgenetics/s/figures

4) We notice that your supplementary Figures, and Table are included in the manuscript file. Please remove them and upload them with the file type 'Supporting Information'. Please ensure that each Supporting Information file has a legend listed in the manuscript after the references list.

5) Some material included in your submission may be copyrighted. According to PLOSu2019s copyright policy, authors who use figures or other material (e.g., graphics, clipart, maps) from another author or copyright holder must demonstrate or obtain permission to publish this material under the Creative Commons Attribution 4.0 International (CC BY 4.0) License used by PLOS journals. Please closely review the details of PLOSu2019s copyright requirements here: PLOS Licenses and Copyright. If you need to request permissions from a copyright holder, you may use PLOS's Copyright Content Permission form.

Please respond directly to this email and provide any known details concerning your material's license terms and permissions required for reuse, even if you have not yet obtained copyright permissions or are unsure of your material's copyright compatibility. Once you have responded and addressed all other outstanding technical requirements, you may resubmit your manuscript within Editorial Manager. 

Potential Copyright Issues:

i) Figures 4K, and S3. Please confirm whether you drew the images / clip-art within the figure panels by hand. If you did not draw the images, please provide (a) a link to the source of the images or icons and their license / terms of use; or (b) written permission from the copyright holder to publish the images or icons under our CC BY 4.0 license. Alternatively, you may replace the images with open source alternatives. See these open source resources you may use to replace images / clip-art:

- https://commons.wikimedia.org

- https://openclipart.org/.

ii) Figures 2F, and S4D. We note that the figures are created through BioRender. Please confirm that you hold a Premium account and provide a pdf copy of the CC BY 4.0 Licence as provided by BioRender. For instructions on how to generate a CC BY 4.0 license for your figure, please see the guidelines here: https://help.biorender.com/hc/en-gb/articles/21282341238045-Publishing-in-open-access-resources. 

If you are using the free assets from BioRender, we are unable to publish these images as they are licenced under a stricter licence than CC BY 4.0. In this case we ask you to remove the BioRender images and replace them with open source alternatives.

See these open source resources you may use to replace images / clip-art:

- https://bioart.niaid.nih.gov/ 

- https://bioicons.com/

- https://healthicons.org/ 

- https://scidraw.io/

- https://reactome.org/icon-lib

- https://www.phylopic.org/images 

- https://journals.plos.org/plosbiology/article?id=10.1371/journal.pbio.3002395

6) We note that your Data Availability Statement is currently as follows: "All relevant data are within the manuscript and its Supporting Information files." Please confirm at this time whether or not your submission contains all raw data required to replicate the results of your study. Authors must share the “minimal data set” for their submission. PLOS defines the minimal data set to consist of the data required to replicate all study findings reported in the article, as well as related metadata and methods (https://journals.plos.org/plosone/s/data-availability#loc-minimal-data-set-definition).

For example, authors should submit the following data: 

1) The values behind the means, standard deviations and other measures reported;

2) The values used to build graphs;

3) The points extracted from images for analysis..

Authors do not need to submit their entire data set if only a portion of the data was used in the reported study.

If your submission does not contain these data, please either upload them as Supporting Information files or deposit them to a stable, public repository and provide us with the relevant URLs, DOIs, or accession numbers. For a list of recommended repositories, please see https://journals.plos.org/plosone/s/recommended-repositories. 

If there are ethical or legal restrictions on sharing a de-identified data set, please explain them in detail (e.g., data contain potentially sensitive information, data are owned by a third-party organization, etc.) and who has imposed them (e.g., an ethics committee). Please also provide contact information for a data access committee, ethics committee, or other institutional body to which data requests may be sent. If data are owned by a third party, please indicate how others may request data access.

7) Please amend your detailed Financial Disclosure statement. This is published with the article. It must therefore be completed in full sentences and contain the exact wording you wish to be published.

1) State the initials, alongside each funding source, of each author to receive each grant. For example: "This work was supported by the National Institutes of Health (####### to AM; ###### to CJ) and the National Science Foundation (###### to AM)."

2) State what role the funders took in the study. If the funders had no role in your study, please state: "The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript."

3) If any authors received a salary from any of your funders, please state which authors and which funders..

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

Figure resubmission:

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step. If there are other versions of figure files still present in your submission file inventory at resubmission, please replace them with the PACE-processed versions.

Reproducibility:

To enhance the reproducibility of your results, we recommend that authors of applicable studies deposit laboratory protocols in protocols.io, where a protocol can be assigned its own identifier (DOI) such that it can be cited independently in the future. Additionally, PLOS ONE offers an option to publish peer-reviewed clinical study protocols. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols

Dear Dr Pierre Gönczy,

We are pleased to inform you that your manuscript entitled "C. elegans SAS-1 ensures centriole integrity and ciliary function, and operates with SSNA-1" has been editorially accepted for publication in PLOS Genetics. Congratulations!

Before your submission can be formally accepted and sent to production you will need to complete our formatting changes, which you will receive in a follow up email. Please be aware that it may take several days for you to receive this email; during this time no action is required by you. Please note: the accept date on your published article will reflect the date of this provisional acceptance, but your manuscript will not be scheduled for publication until the required changes have been made.

Once your paper is formally accepted, an uncorrected proof of your manuscript will be published online ahead of the final version, unless you’ve already opted out via the online submission form. If, for any reason, you do not want an earlier version of your manuscript published online or are unsure if you have already indicated as such, please let the journal staff know immediately at plosgenetics@plos.org.

In the meantime, please log into Editorial Manager at https://www.editorialmanager.com/pgenetics/, click the "Update My Information" link at the top of the page, and update your user information to ensure an efficient production and billing process. Note that PLOS requires an ORCID iD for all corresponding authors. Therefore, please ensure that you have an ORCID iD and that it is validated in Editorial Manager. To do this, go to ‘Update my Information’ (in the upper left-hand corner of the main menu), and click on the Fetch/Validate link next to the ORCID field.  This will take you to the ORCID site and allow you to create a new iD or authenticate a pre-existing iD in Editorial Manager.

If you have a press-related query, or would like to know about making your underlying data available (as you will be aware, this is required for publication), please see the end of this email. If your institution or institutions have a press office, please notify them about your upcoming article at this point, to enable them to help maximise its impact. Inform journal staff as soon as possible if you are preparing a press release for your article and need a publication date.

Thank you again for supporting open-access publishing; we are looking forward to publishing your work in PLOS Genetics!

Yours sincerely,

Nathalie Pujol

Academic Editor

PLOS Genetics

Pablo Wappner

Section Editor

PLOS Genetics

Aimée Dudley

Editor-in-Chief

PLOS Genetics

Anne Goriely

Editor-in-Chief

PLOS Genetics

www.plosgenetics.org

BlueSky: @plos.bsky.social

----------------------------------------------------

Comments from the reviewers (if applicable):

Reviewer's Responses to Questions

Comments to the Authors:

Please note here if the review is uploaded as an attachment.

Reviewer #1: The authors have addressed my concerns. I am in favor of publication.

Reviewer #2: The authors have addressed all of my comments. In particular, clarification about the phenotype of the sas-1 null mutant and additional information on the role of SAS-1 in cilia have improved and strengthened the paper. I recommend the manuscript for publication.

Reviewer #3: I appreciate the authors' thorough responses and the results from the new experiments, which satisfactorily addressed my questions and concerns. I now recommend this article for publication in PLOS Genetics.

**********

Have all data underlying the figures and results presented in the manuscript been provided?

Large-scale datasets should be made available via a public repository as described in the PLOS Genetics data availability policy , and numerical data that underlies graphs or summary statistics should be provided in spreadsheet form as supporting information.

Reviewer #1: Yes

Reviewer #2: None

Reviewer #3: Yes

**********

PLOS authors have the option to publish the peer review history of their article (what does this mean? ). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy .

Reviewer #1: No

Reviewer #2: No

Reviewer #3: No

----------------------------------------------------

Data Deposition

If you have submitted a Research Article or Front Matter that has associated data that are not suitable for deposition in a subject-specific public repository (such as GenBank or ArrayExpress), one way to make that data available is to deposit it in the Dryad Digital Repository . As you may recall, we ask all authors to agree to make data available; this is one way to achieve that. A full list of recommended repositories can be found on our website .

The following link will take you to the Dryad record for your article, so you won't have to re‐enter its bibliographic information, and can upload your files directly: 

http://datadryad.org/submit?journalID=pgenetics&manu=PGENETICS-D-25-00687R1

More information about depositing data in Dryad is available at http://www.datadryad.org/depositing. If you experience any difficulties in submitting your data, please contact help@datadryad.org for support.

Additionally, please be aware that our data availability policy  requires that all numerical data underlying display items are included with the submission, and you will need to provide this before we can formally accept your manuscript, if not already present.

----------------------------------------------------

Press Queries

If you or your institution will be preparing press materials for this manuscript, or if you need to know your paper's publication date for media purposes, please inform the journal staff as soon as possible so that your submission can be scheduled accordingly. Your manuscript will remain under a strict press embargo until the publication date and time. This means an early version of your manuscript will not be published ahead of your final version. PLOS Genetics may also choose to issue a press release for your article. If there's anything the journal should know or you'd like more information, please get in touch via plosgenetics@plos.org .