Advertisement

Browse Subject Areas

?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

Steel

Optimization of process parameters for enhancing the tensile strength of diffusion-bonded Al–Al and Al–Fe–Al laminated structures

An-Le Van, Nguyen Truong Sinh, [ ... ], Pham Son Minh

Optimization of CNC milling parameters for YXR-7 tool steel using fuzzy MARCOS: A multi-response approach to improve machining productivity

Adooru L. N. Arunkumar, Sunil Kumar, [ ... ], Ankur Jaiswal

Analysis of mechanical properties and micro-mechanisms of concrete based on the method of using steel slag as aggregate replacement: Macro-mechanical tests and microscopic tests of four typical control groups

Xiaobing Chen, Hengyi Yang, [ ... ], Ronglong Zhao

Experimental and numerical studies on heat exchange between slag/metal particles and air inside countercurrent cyclone heat exchanger for recovering waste heat from molten slags in dry and centrifugal granulation process

Shali Lv, Yuhua Pan, [ ... ], Haixin Guo

Research on the anti-pull performance of a novel small-diameter steel tube-stud grouting connector

Ming-su Zhou, En-he Bao, [ ... ], Chang-jian Xiao

Aging-induced multi-scale study on the interfacial adhesion mechanism of steel slag and RAP recycled asphalt mixtures

Yaodong Zhang, Yanan Cui, Shun Guo, Zhiyong Li

Calculation method and predictive analysis of flexural capacity of reinforced concrete beams strengthened with carbon fiber-reinforced polymer sheets applied to the side surfaces

Xiang Liu

Hybrid RSM–NSGA-II based multi-objective optimization of electrical discharge machining of AISI D2 steel

Suman Mondal, Biswajit Sing Sardar, [ ... ], Ranjan Kumar Ghadai

Microstructure—Machinability correlation in heat treated AISI 1040 steel: Comparative analysis of tool life and surface roughness

Umanath R. Poojary, Ananda Hegde, Sriharsha Hegde, Rayappa Shrinivas Mahale

Quantitative evaluation of anti-sliding performance and dosage regulation of steel slag asphalt mixture facing service environment

Zhiqiao Cheng, Ping Li, Jingsheng Pan

Edge-focused wire arc additive manufacturing: Method development with ANN-based stress–strain and mass-efficiency

Tran Le Hong Ngoc, Ha Thi Xuan Chi, Van-Thuc Nguyen, Pham Son Minh

Sterilization efficacy of a warm-air circulation system in a vaporized hydrogen peroxide sterilizer

Mi Suk Noh, Su Yeon Lee, [ ... ], Bong-Hyun Jun

Experimental and numerical study on the flexural capacity of fiber mesh fabric-reinforced RC slabs

Chunxiang Guo, Xiaoming Bao, [ ... ], Ke Jiang

Advertisement

Create a weekly email alert for: Steel

You can change these options by clicking profile then "Alerts and Notifications"