3D printed microchannels for sub-nL NMR spectroscopy

E. Montinaro; M. Grisi; M. C. Letizia; L. Pethö; M. A. M. Gijs; R. Guidetti; J. Michler; J. Brugger; G. Boero

doi:10.1371/journal.pone.0192780

Loading metrics

Open Access

Peer-reviewed

Research Article

3D printed microchannels for sub-nL NMR spectroscopy

E. Montinaro,

Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Project administration, Validation, Visualization, Writing – original draft, Writing – review & editing

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland

http://orcid.org/0000-0001-8653-9020

⨯
M. Grisi,

Roles Data curation, Investigation, Methodology

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland
⨯
M. C. Letizia,

Roles Investigation, Methodology

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland
⨯
L. Pethö,

Roles Investigation, Methodology

Affiliation Swiss Federal Laboratories for Materials Science and Technology (EMPA), Laboratory for Mechanics of Materials and Nanostructures, Thun, Switzerland
⨯
M. A. M. Gijs,

Roles Methodology

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland
⨯
R. Guidetti,

Roles Methodology

Affiliation University of Modena and Reggio Emilia, Department of Life Sciences, Modena, Italy
⨯
J. Michler,

Roles Investigation, Methodology

Affiliation Swiss Federal Laboratories for Materials Science and Technology (EMPA), Laboratory for Mechanics of Materials and Nanostructures, Thun, Switzerland
⨯
J. Brugger,

Roles Funding acquisition, Resources, Supervision, Validation

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland
⨯
G. Boero

Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, Writing – review & editing

* E-mail: giovanni.boero@epfl.ch

Affiliation Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Microsystems, Lausanne, Switzerland
⨯

3D printed microchannels for sub-nL NMR spectroscopy

E. Montinaro,
M. Grisi,
M. C. Letizia,
L. Pethö,
M. A. M. Gijs,
R. Guidetti,
J. Michler,
J. Brugger,
G. Boero

Published: May 9, 2018
https://doi.org/10.1371/journal.pone.0192780

Reader Comments (0)

Post a new comment on this article

Subject Areas
?

For more information about PLOS Subject Areas, click here.
We want your feedback. Do these Subject Areas make sense for this article? Click the target next to the incorrect Subject Area and let us know. Thanks for your help!

Microfluidics
Is the Subject Area "Microfluidics" applicable to this article?

Thanks for your feedback.
Caenorhabditis elegans
Is the Subject Area "Caenorhabditis elegans" applicable to this article?

Thanks for your feedback.
NMR spectroscopy
Is the Subject Area "NMR spectroscopy" applicable to this article?

Thanks for your feedback.
Ova
Is the Subject Area "Ova" applicable to this article?

Thanks for your feedback.
3D printing
Is the Subject Area "3D printing" applicable to this article?

Thanks for your feedback.
Nuclear magnetic resonance
Is the Subject Area "Nuclear magnetic resonance" applicable to this article?

Thanks for your feedback.
Magnetic fields
Is the Subject Area "Magnetic fields" applicable to this article?

Thanks for your feedback.
Extremophiles
Is the Subject Area "Extremophiles" applicable to this article?

Thanks for your feedback.