https://orcid.org/0000-0001-7868-4076
Figures
Abstract
Herding operations in rural areas often lack reliable wireless connectivity, hindering real-time monitoring of livestock, environmental conditions, and operational status. Existing solutions like satellite or cellular networks are costly or impractical, while short-range wireless technologies struggle with large farm coverage. This paper presents a UAV-BPL synchronization algorithm that uses the farm’s existing electrical grid via Broadband over Power Line (BPL) communication to enable cost-effective, scalable data collection. The algorithm integrates Unmanned Aerial Vehicles (UAVs) with BPL relay points to optimize information exchange in herding operations. Two operational scenarios are proposed in the paper: the Coverage-Driven scenario that maximizes data collection from all sources, achieving 99.2% coverage and critical data redundancy, and the Priority-Driven scenario that focuses on high-urgency data, covering 100% of priority sources with ~12% energy consumption. The paper evaluates performance indicators such as coverage, energy usage, frequency of relay visits, and response timeliness using MATLAB simulations. Results demonstrate that the Coverage-Driven scenario excels in comprehensive monitoring, while the Priority-Driven scenario ensures energy-efficient, rapid responses to critical events. By combining BPL’s robust connectivity with UAV mobility, the proposed method enhances farm management, scalability, and adaptability, offering a practical solution for rural dairy herding operations to improve productivity and sustainability.
Citation: Sadiq BO, Al-Mutairi M, Sha’aban YA, Bouchekara HRE-H, Almutairi K (2025) Sky and wire: A UAV-BPL synchronization algorithm for information exchange in herding operations. PLoS One 20(10): e0334888. https://doi.org/10.1371/journal.pone.0334888
Editor: Antar S. H. Abdul-Qawy, SUMAIT University, TANZANIA, UNITED REPUBLIC OF
Received: June 28, 2025; Accepted: October 1, 2025; Published: October 22, 2025
Copyright: © 2025 Sadiq et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: The data underlying the results presented in the study are available from https://github.com/bosadiq/UAV-BPL-synchronization-algorithm.
Funding: Princess Nourah bint Abdulrahman University Researchers Supporting Project number (PNURSP2025R241), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Herding operations in rural areas face significant challenges in achieving real-time monitoring of livestock, environmental conditions, and operational status due to limited wireless connectivity. Wi-Fi and cellular networks, which are conventional communication methods, are often unreliable or unavailable in remote locations because of sparse infrastructure and challenging terrain [1–3]. This leads to delays in detecting critical events, such as cattle illnesses or environmental changes. Thus, reducing farm productivity and sustainability [4,5]. While satellite communication offers an alternative, its high cost makes it inaccessible for small-to-medium scale farmers. On the other hand, short-range wireless technologies like ZigBee and Bluetooth are also inadequate for covering large farm areas, suffering from signal attenuation and high energy demands [6–10]. As such, many rural farms rely on manual monitoring, which can be labor-intensive and error-prone [11].
BPL communication emerges as a promising solution by leveraging existing electrical infrastructure to transmit data reliably over long distances [12,13]. BPL uses the farm’s existing electrical power cables as a communication backbone for powering the barns, milking stations, and other farm buildings as a pre-made communication network that offers high bandwidth of up to 100 Mbps. This is in addition to providing weather-resistant connectivity without the need for costly new installations [14,15]. Nonetheless, BPL alone cannot address the dynamic data collection needs of large farms, as sensors are often distributed across remote pastures, inaccessible to fixed relay points. Therefore, it requires the use of UAVs. The availability of low-cost UAVs has made them accessible to individuals, including farmers. Hence, UAVs could be used in conjunction with the BPL to provide full coverage of the farms and herding fields. UAVs complement BPL by providing aerial mobility to collect data from dispersed sensors and deliver it to BPL relays, enhancing coverage and responsiveness [16,17]. Unlike direct BPL transmission to farm operators or the cloud, which lacks flexibility for real-time interventions, UAVs enable targeted data retrieval and imagery capture, critical for urgent scenarios like health alerts or weather events [18,19]. Fig 1 presents a typical layout of UAVs in an agricultural setting.
When combined, UAV and BPL create a dynamic framework for information sharing that redefines the way herding farms communicate, keep a surveillance on things, and react instantly [18–20]. In this situation, BPL communication stands out as a very effective solution, and its application in herding operations is clearly warranted. Despite advancements in smart agriculture, existing solutions face significant limitations. Satellite-based systems, while robust, are cost-prohibitive and complex to deploy [20]. Wireless protocols like LoRa and ZigBee offer low-power communication but are constrained by limited range and bandwidth. Making it unsuitable for high-volume data streams [21,22]. Recent studies, such as those exploring sustainable farming using AI and IoT technologies [23] and UAV networks for air patrol with a view to gathering information, and precisely respond to farm demand [24–26], highlight energy and scalability challenges, particularly for smallholder farmers. The concept of BPL technology is demonstrated in Fig 2.
The objective of the work is to develop a UAV-BPL framework for smart herd farming, integrating UAVs with high-bandwidth BPL communication to optimize real-time data collection, achieving low latency and high coverage while reducing manual labor and enhancing animal welfare through efficient, scalable monitoring compared to traditional wireless methods. This study proposes a UAV-BPL synchronization algorithm designed to optimize information exchange in dairy farm herding operations. By integrating UAVs with BPL relay points, the algorithm minimizes UAV travel distance while prioritizing the routing of urgent data, such as livestock vitals or environmental alerts. The proposed framework leverages BPL’s stability to aggregate data from diverse sources such as cattle sensors and weather stations at fixed relay points, which UAVs access efficiently, reducing energy consumption and enhancing scalability. The main contributions of the paper are highlighted as follows:
- The paper presents a novel UAV-BPL sites synchronization method, which minimizes UAV travel distances and maximizes information sharing.
- The proposed method offers a robust, cost-effective substitute for conventional connectivity methods in remote locations by combining BPL’s utilization of existing power lines with UAV agility.
- A flexible, priority-driven approach that addresses diverse farm data types, surpassing prior efforts focused solely on livestock health.
The paper is structured as follows: the first section introduces the paper. The second section discusses related works and explores the fundamental concepts of UAV and IoT in smart agriculture. The third section presents the methodology and algorithm, while the fourth section presents the results and discussions. Finally, the fifth section presents the conclusion to the work.
Related work
Advancements in Internet of Things (IoT) devices, UAVs, sensors, and communication technologies such as Flying Ad Hoc Networks (FANETs) and low-power wireless systems have resulted in their adoption in smart farming. These technologies support precision agriculture through precise data acquisition, interconnectivity, and efficient management practices in livestock farming, especially in expansive rural environments. However, limited wireless coverage and high energy consumption associated with mobile UAV operations remain critical challenges. This section reviews existing solutions, focusing on wireless technologies, satellite-UAV systems, and BPL applications, highlighting their limitations and the need for a cost-effective, scalable alternative.
The study reported in [26] proposes multi-objective UAV swarm optimization for multi-target localization in agricultural settings using Pareto Optimality Theory, balancing energy usage, communication latency, and task distribution. On the other hand [27], explores the coordination of UAVs and satellites within Space-Air-Ground Integrated Networks (SAGIN), using Age of Information (AoI) as a freshness metric and examining interference in Full Frequency Reuse (FFR) vs. frequency division schemes. One notable field-tested implementation is the (Space-Air-Ground integrated Grazing IoT) SAG-GIoT system demonstrated by [28], which uses BeiDou satellite messaging and (Long Range) LoRa in rugged pastoral zones of the Qinghai-Tibet Plateau. Though cost-effective and scalable, the system is constrained by LoRa’s low data bandwidth, limiting its application to sensor updates rather than real-time multimedia or bulk data. This limitation presents a problem that could be well suited for high data bandwidth technologies such as BPL. BPL’s role in smart grids has been extensively studied, especially in rural electrification contexts. Galli et al. [29] present how BPL functions both as the control and data transmission backbone in power infrastructure, supporting broadband speeds up to 100 Mbps over several kilometers. This positions BPL as a viable rural alternative to conventional approaches such as Wi-Fi, ZigBee, or LoRa. Moreover, BPL’s robustness and weather resistance in harsh grid environments position it as a viable option for connectivity in agricultural settings. Ferreira et al. [30] and Lampe et al. [31] further show how BPL handles signal attenuation, impedance, and multiple access control schemes to deliver consistent service across large geographic areas, with minimal additional infrastructure costs due to reliance on existing power lines. These properties make BPL a highly compatible medium for use with UAV-based data retrieval in large pastures, barns, and remote sensors as required by our application.
Another work [32], introduces the Air-to-ground, Energy-aware mission-oriented protocol, leveraging the Fuzzy Logic (AERO-FL) routing protocol in a FANET with five UAVs and IEEE 802.11n. This protocol achieves real-time image transmission but at high energy costs and requires line-of-sight (LoS). Likewise, [33] leverages a CTracker model for cattle tracking, but the protocol relies on 802.11 wireless, which offers limited range and bandwidth compared to BPL, in addition to the unavailability of the wireless technology in some remote locations. Other studies explore ZigBee [34], Bluetooth [35], and hybrid wireless schemes in Flying Ad-Hoc Networks (FANETs). While suitable for energy-efficient UAV-to-UAV (U2U) and UAV-to-Infrastructure (U2I) communication, these technologies fall short in rural scenarios demanding long-range, high-bandwidth, and low-latency performance. For instance, [36] showed high packet loss using IEEE 802.15.4 over rural landscapes due to foliage and terrain. Researchers like [37] have proposed integrated satellite–aerial–terrestrial integrated network (SATIN) architectures with multi-UAV Internet of Remote Things (IoRT) deployments to address coverage, interference, and battery drain challenges. Although these systems increase network resilience and coverage, they also demand more capital and technical overhead, which is an obstacle for smallholder farmers. Therefore, the BPL-UAV synergy offers a practical compromise by centralizing data relay at power poles and allowing UAVs to retrieve batches of high-priority sensor data. BPL’s long range, stability, and bandwidth overcome the limitations of short-range wireless technologies. The UAVs, in turn, avoid frequent battery-depleting flights, maximizing efficiency and scalability. Therefore, the literature supports using BPL as a communication backbone for smart agriculture in rural locations, especially when combined with UAVs for dynamic data collection and action. As summarized in Table 1, the UAV-BPL configuration outperforms traditional wireless-only systems across multiple operational dimensions.
A summary of some of the pertinent works is given in Table 2.
Based on the pertinent works of literature, key gaps are identified and are as follows: (1) low-bandwidth wireless protocols such as ZigBee, amongst others, fail to support high-volume data over large farms. (2) Satellite-based systems are cost-prohibitive for smallholder farmers to deploy. (3) UAV-based solutions suffer from high energy consumption and limited range. (4) Existing BPL applications lack dynamic data collection mechanisms. Therefore, the proposed UAV-BPL synchronization algorithm addresses these gaps by combining BPL’s high-bandwidth, long-range connectivity with UAVs’ aerial mobility. Unlike wireless systems, it leverages existing power lines for cost-effective, weather-resistant data transfer. Compared to satellite solutions, it reduces costs by using farm infrastructure. By centralizing data at BPL relays, it minimizes UAV travel and energy use, while its priority-driven approach ensures the timely delivery of critical data, enhancing scalability and adaptability for rural herding farms.
Methodology
This section presents the methodology for the UAV-BPL synchronization framework, designed to optimize information exchange in dairy farm herding operations. The framework uses the farm’s electrical grid via BPL communication, integrated with UAVs, and relay points to collect and process data from sensors. The methodology is structured in three phases: data collection, UAV-BPL synchronization, and information processing and exchange, with two operational scenarios (Coverage-Driven and Priority-Driven) to address diverse farm operational needs. The UAV-BPL coordination framework is depicted in Fig 3. The head-end is the equipment at the Internet Service Provider (ISP) side where the data from the power line network is collected and injected into the internet backbone or the cloud while the LV line is the Low Voltage line.
Assumptions and system overview
The framework assumes a herding farm with existing electrical infrastructure supporting BPL communication that adheres to the IEEE 1901 standards for high-bandwidth data transfer (up to 100 Mbps) over power lines. The grid is assumed reliable, with noise levels below 40 dB and interference mitigated by BPL modems. Relay points, equipped with BPL modems & isolation circuits and low-power Wi-Fi modules, aggregate data from sensors and communicate with UAVs. Safety is ensured through isolation circuits and step-down transformers that protect IoT and other devices from high-voltage lines. Thereby, minimizing risk to human operators and equipment [38]. Prioritizing computational simplicity, flight time for UAV data transport is neglected due to short distances between relays and UAVs. The system is scalable, supporting a larger number of UAVs and relay nodes used herein, with performance expected to degrade gracefully for larger farms due to increased coordination overhead. The table of symbols and notations is presented in Table 3.
UAV-BPL synchronization
Synchronization between UAVs and BPL relay points is achieved through a two-layer communication protocol (physical layer and medium access control layer). The BPL network maintains a channel capacity to ensure reliable data relay. Relay points are presumed to use Wi-Fi (IEEE 802.11n) for short-range (<100m) communication with UAVs, employing a time-division multiple access schedule to avoid interference. Relay points are hardware modules with BPL modems, Wi-Fi transceivers, and microcontrollers, mounted on power poles.
The methodology for the proposed synchronization algorithm is broken down into three distinct phases as follows:
- Data Collection: Sensors placed across the herding farm generate data packets
at time t, where
denotes the index of the sensor. Packets are transmitted via BPL to the nearest relay point along power lines. The relay points, positioned along power lines, serve as data hubs, consolidating information for UAV access. If the packet has a high priority
, UAVs are notified to collect data directly from the sensor. Priority
is computed in real time based on the sensor algorithm evaluating critical thresholds.
- UAV Synchronization: UAVs indexed
continuously monitor nearby sensors within their communication radius with the help of Wi-Fi (IEEE 802.11n) with a TDMA schedule to avoid interference. For each sensor
, the UAV evaluates energy levels and priority against predefined thresholds according to equations (1) and (2):
Where is the energy level of the UAV
at time
is the UAV’s minimum energy required threshold,
is the priority score of the packet, and
is the threshold value that decides high-priority packets. If both conditions (1) and (2) are met, the UAV proceeds to collect
from the sensor or its assumed relay. This dynamic decision-making ensures that UAVs are dispatched only when necessary, preserving energy while guaranteeing that critical data is not delayed or lost due to weak BPL connectivity
- Information processing and exchange: On reaching a sensor, UAVs retrieve
and for high-priority data
, capturing additional information. If BPL capacity is insufficient, the UAV stores the data and retries transmission to a cloud when
. Relay points also forward data to cloud storage via BPL, forming a closed-loop cycle. This phase optimizes real-time decision-making with efficient data routing, maximizing throughput while reducing latency and energy consumption.
Problem statement
Consider a farm with N sensor nodes and M UAVs operating at a herding farm, measuring . Each sensor
generates packet
at time t, transmitted via BPL to the nearest relay point. UAV
retrieves
from a relay at distance
with energy level
. A priority function
assigns urgency, with
indicating priority data as determined in real time by sensor algorithms evaluating vital signs or environmental thresholds. The objective is to minimize UAV travel distance while maximizing timely data exchange, subject to energy and BPL capacity constraints.
Coverage-Driven scenario (Scenario 1).
This scenario minimizes total UAV travel distance to ensure all sensors are covered, prioritizing comprehensive monitoring. The constraint equation is defined as:
Subject to:
Where = 1 if UAV j collects data from the sensor i, else 0.
is the distance from UAV j to relay point that aggregates data from sensor i, w is the weight for the timeliness penalty,
is the redundancy factor that ensures critical data is collected by at least two UAVs for reliability, and
is the average latency of data collection across all sources. The algorithm for scenario 1 is presented as follows:
Algorithm 1. Coverage-Driven UAV-BPL synchronization
Input: N, M, , BPL relay locations, UAV range, BPL range,
, R
Output: UAV paths, data log, redundancy compliance
1. Initialize herding grid with BPL relay points
2. for each data source i = 1 to N
3. Generate timestamp
4. Transmit to the nearest BPL relay point
5. end for
6. Assign relays to sensors by proximity
7. for each UAV j = 1 to M do
8. identify unvisited relay points within range
9. while unvisited relay points remain do
10. select the nearest unvisited relay k with min
11. if then
12. Set = 1 for all
at k
13. move to k, record
14. collect all mark critical data
15. if and redundancy R > 1 unmet then
16. signal another UAV to collect
17. end if
18. if then
19. relay data to cloud (herder) via BPL
20. else
21. wait
22. end if
23. mark k as visited
24. end if
25. end while
26. end for
27. Return to base when all relays have been visited
28. Compute = avg(
–
for all i
29. Log for performance analysis
Priority-Driven Exchange scenario (Scenario 2).
This scenario minimizes travel distance while prioritizing high-urgency data and optimizing energy efficiency. The constraint equation is defined as:
Subject to:
Where ,
are weights for energy and responsiveness.
is the average response time for priority data.
is the total energy budget. UAVs can visit multiple relays per time step if
, with no explicit capacity constraint due to lightweight data packets. The algorithm for scenario 2 is presented as follows: The algorithm prioritizes high-urgency data, reassigning tasks if energy is low, with τ and
computer for analysis.
Algorithm 2. Priority Driven UAV-BPL synchronization
Input: N, M,
BPL relay locations, UAV range, BPL range,
,
, Energy Consumption Rate
Output: UAV paths, priority data log,
1. Initialize farm grid with BPL relay points
2. for each data source i = 1 to N
3. Generate timestamp
4. Transmit to the nearest BPL relay point
5. end for
6. for each UAV j = 1 to M do
7. Identify relay points within range
8. for each relay k in range do
9. retrieve packets
10. if and
then
11. Set = 1
12. move to k at record
13. collect capture imagery if needed
14. if then
15. relay data to cloud via BPL
16. else
17. wait
18. end if
19. else
20. Skip to the next packet/relay
21. end if
22. update =
– (
× energy consumption rate)
23. if <
:
24. reassign uncollected high-priority to UAV with
25. end if
26. compute = avg(114>>
–
for high-priority i
27. compute =
28. end for
Simulation results and discussion
To evaluate the UAV-BPL synchronization framework, simulations were conducted for two scenarios: Coverage-Driven (Scenario 1) and Priority-Driven (Scenario 2). The setup considers a 200 × 200m2 dairy farm with 50 sensors, 5 UAVs, and 10 BPL relay points, using parameters from Section 3: communication range (100 m), energy threshold ( = 20%), priority threshold (
= 0.7), and redundancy factor (R = 2). Simulations ran 10 times with varying random seeds to ensure robustness, computing mean and standard deviation for key metrics: average latency (λ), response time for high-priority data (τ), total energy consumption (
), coverage, and redundancy. The simulation parameters chosen intuitively used in this study are given in Table 4.
Simulation results
Scenario 1.
Coverage-Driven Exchange aims to ensure all sensors are visited, with redundancy for critical data . Fig 4 visualizes the results. (a) UAV paths, where blue circles represent sensors, red squares denote BPL relays, and black lines indicate UAV trajectories; (b) coverage and redundancy percentages; (c) data collection timeliness; (d) total distance and energy; (e) relay visitation frequency; and (f) energy per UAV. Over 10 iterations, Scenario 1 achieved a mean coverage of 99.2% (±2.5%) and redundancy compliance of 96.2% (±7.9%) for critical data. The average latency was 5.03 s (±0.89 s), and total energy consumption (
) was 7.9% (±1.1%).
The resulting UAV monitoring path plots for scenario 1 are shown in Figs 4–9. The plots reveal the distribution of data urgency around the herding farm, the effectiveness of UAV allocation to BPL relay locations, operational aspects such as energy management, relay visitation frequency, and distance optimization. The UAV paths in Fig 4 illustrate how the algorithms allocate UAVs to relays to maximize travel distance, covering all data sources. The coverage and energy metrics plot for Scenario 1’s coverage, presented in Fig 5, shows 99.2% coverage of all 50 data sources, ensuring comprehensive herding-wide information exchange. Additionally, 96.2% critical data redundancy is achieved, meeting the redundancy goal to enhance reliability, albeit at a likely higher energy cost. Fig 6 shows Scenario 1’s data collection timeliness plot, which shows the distribution of collection times for all 50 data sources, with an average latency of 5.03 seconds, indicating that most data is collected between 1 and 6 seconds, reflecting the algorithm’s focus on comprehensive coverage but with varied delays due to exhaustive relay visits. Scenario 1’s distance plot highlights the high resource demand of its exhaustive approach to achieving 99.2% data coverage by visiting all BPL relay points. Fig 7 shows the total distance and energy for the scenario. The algorithm’s aim to cover all 10 BPL relay points for 100% data collection from 50 sources is reflected in Scenario 1’s relay visitation frequency plot presented in Fig 8, which indicates that relays 1–5, and 7, 9–10 were visited twice each, while relays 6 and 8 were visited once. Higher visits to specific relays are probably caused by the need for redundancy for critical data. As Scenario 1 thoroughly covers all 50 data sources via 10 BPL relay points, UAV 1 probably handles more relays to achieve higher coverage, as evidenced by the energy consumption per UAV bar chart in Fig 9, which shows that UAV 1 used more of its energy in comparison to the others.
Scenario 2.
Priority-Driven Exchange prioritizes high-priority data . The results for this scenario are given in Figs 10–15. Fig 10 presents the UAV paths, with sensor colors indicating priority scores. Fig 11 shows priority coverage and energy. Similarly, Figs 12 and 13 show the response time distribution and total distance covered, respectively, while Figs 14 and 15 show relay visits and cumulative coverage. The mean priority data coverage was 100% (±0.0%), with a response time (τ) of 4.94 s (±0.18 s) and
of 11.8% (±4.8%).
The resulting UAV monitoring path plots for scenario 2 are shown in Fig 5. The paths illustrate how the algorithms allocate UAVs to relays to maximize travel distance, prioritizing either high-urgency data. Scenario 2’s coverage and energy metrics plot reveals 100% coverage of high-priority data, reflecting its focus on urgent information like health alerts while satisfying energy constraints () and a low ~ 12% total energy usage, highlighting its energy efficiency but trading off full coverage for selective responsiveness in herding operations. Scenario 2’s high-priority response time plot illustrates the response times for high-priority data with a mean 4.94 seconds, and most of the time clustering between 2 and 8 seconds, demonstrating faster responses to urgent data, such as health alerts, due to its selective approach. The total UAV distance plot for Scenario 2, on the other hand, shows a much higher total distance of roughly 2000m. Despite its priority-driven approach focusing on high-urgency data, this suggests more travel possibly due to the reassignment of uncollected high-priority data to available UAVs, though it maintains energy efficiency that was previously shown as ~12% total usage by selectively targeting urgent relays, balancing responsiveness and resource conservation in herding operations. Scenario 2’s relay visitation frequency plot shows that some relays were visited three times each, while some others were not visited. Scenario 2’s cumulative coverage over sources line plot, on the other hand, shows that coverage increases stepwise to as data sources are processed. This is consistent with the priority-driven focus on high-urgency data. The results of the simulation’s scenario is presented in Table 5.
Conclusively, it can be stated that Scenario 1 is suited for herding operations prioritizing reliability and complete data collection such as routine monitoring of livestock and environmental conditions while Scenario 2 is ideal for time-sensitive applications such as rapid detection of health issues or environmental hazards. Therefore, the choice depends on whether the herding operations values exhaustive coverage or rapid response to critical events.
Discussion
Redundancy Impact: In Scenario 1, the redundancy factor (R = 2) ensures critical data is collected by at least two UAVs, achieving 95.6% compliance. Thus, this indicates that the latency increases with low redundancy. On the other hand, the total energy increase due to additional UAV flights, as shown in Fig 4(e). However, this enhances reliability for critical data such as health alerts which is crucial for herding farm operations.
Response Time Significance: Scenario 2’s τ = 4.94s ensures rapid collection of high-priority data, enabling timely responses to livestock health or environmental alerts. This supports early decision making such as dispatching veterinarians for urgent cases. Scenario 2’s priority coverage uses BPL’s high bandwidth [38] and UAV mobility [40] to overcome limitations of low-bandwidth wireless systems.
Parameter Sensitivity: Simulations varying farm size (100 × 100–400 × 400 m2), UAVs (3–10), and sensors (25–100) show that larger farms increase latency and total energy due to longer UAV paths. Increasing UAVs reduces latency. More sensors improve coverage but slightly increase average response time in Scenario 2, indicating scalability trade-offs. The framework’s robustness, low latency, and energy efficiency make it a viable solution for smart herding operations. Thus, capable of addressing gaps in existing methods while balancing reliability and real-time performance.
Conclusions
This study utilized the farm’s existing electrical grid via Broadband over Power Line (BPL) communication to enable cost-effective, scalable data collection and communication. Simulations used across a 200 × 200m2 farm with 50 sensors, 5 UAVs, and 10 BPL relays demonstrate its efficacy. In Scenario 1 (Coverage-Driven), the framework achieves 99.2% coverage and 96.2% redundancy for critical data, with an average latency of 5.03s and total energy consumption () of 7.9%. Scenario 2 (Priority-Driven) delivers a response time of 4.94s for high-priority data, with 100% coverage and
of 11.8%. These results will enable timely interventions, such as dispatching veterinarians for livestock health alerts and adjusting environmental controls. Thereby, improving farm efficiency and animal welfare. The framework’s novelty lies in synergizing BPL’s high-bandwidth, reliable infrastructure (IEEE 1901) with UAVs’ mobility. Unlike low-bandwidth wireless systems, it ensures robust data transfer even under high sensor loads. However, limitations include dependency on stable BPL infrastructure, which may face noise or outages, and scalability challenges for very large farms hectares. These results provide herders with a flexible framework to optimize farm management by customizing the algorithm to meet specific requirements, such as energy-efficient emergency response or thorough monitoring. The system is an effective instrument for raising agricultural productivity due to its scalability, dependability, and flexibility in responding to changing herding conditions. Future work includes real-world deployments to validate performance under varying conditions, developing adaptive synchronization algorithms to handle dynamic sensor priorities, and integrating IoT analytics for predictive farming.
References
- 1. Tekin K, Yurdakök Dikmen B, Kanca H, Guatteo R. Precision livestock farming technologies: novel direction of information flow. Ankara Üniv Vet Fak Derg. 2021;68(2):193–212.
- 2. Akram SV, Joshi A. IoT based intelligent cattle shed management. 2022 International Interdisciplinary Humanitarian Conference for Sustainability (IIHC). IEEE; 2022. p. 628–632.
- 3. Mapiye O, Makombe G, Molotsi A, Dzama K, Mapiye C. Information and communication technologies (ICTs): the potential for enhancing the dissemination of agricultural information and services to smallholder farmers in sub-Saharan Africa. Inf Dev. 2021;39(3):638–58.
- 4. Zhang Y, Love DJ, Krogmeier JV, Anderson CR, Heath RW, Buckmaster DR. Challenges and opportunities of future rural wireless communications. IEEE Commun Mag. 2021;59(12):16–22.
- 5. Cabrera-Castellanos DF, Aragón-Zavala A, Castañón-Ávila G. Closing connectivity gap: an overview of mobile coverage solutions for not-spots in rural zones. Sensors (Basel). 2021;21(23):8037. pmid:34884041
- 6. LoPiccalo K. Impact of broadband penetration on U.S. Farm productivity: a panel approach. Telecomm Policy. 2022;46(9):102396.
- 7. Chhaya L, Sharma P, Kumar A, Bhagwatikar G. IoT-based implementation of field area network using smart grid communication infrastructure. Smart Cities. 2018;1(1):176–89.
- 8. Avşar E, Mowla MdN. Wireless communication protocols in smart agriculture: a review on applications, challenges and future trends. Ad Hoc Netw. 2022;136:102982.
- 9. Goel RK, Yadav CS, Vishnoi S, Rastogi R. Smart agriculture – urgent need of the day in developing countries. Sustain Comput Inform Syst. 2021;30:100512.
- 10. Phang SK, Chiang THA, Happonen A, Chang MML. From satellite to UAV-based remote sensing: a review on precision agriculture. IEEE Access. 2023;11:127057–76.
- 11. Sadiq BO, Buhari MD, Danjuma YI, Zakariyya OS, Shuaibu AN. High-tech herding: Exploring the use of IoT and UAV networks for improved health surveillance in dairy farm system. Sci African. 2024;25:e02266.
- 12. Sarafi A, Tsiropoulos G, Cottis P. Hybrid wireless-broadband over power lines: a promising broadband solution in rural areas. IEEE Commun Mag. 2009;47(11):140–7.
- 13. Si LF, Li M, He L. Farmland monitoring and livestock management based on internet of things. IoT. 2022;19:100581.
- 14. Li X, Huang H, Savkin A, Zhang J. Robotic herding of farm animals using a network of barking aerial drones. Drones. 2022;6(2):29.
- 15. Long H, Fu X, Kong W, Chen H, Zhou Y, Yang F. Key technologies and applications of rural energy internet in China. Inf Proc Agric. 2024;11(3):277–98.
- 16. Foudeh HA, Luk PC-K, Whidborne JF. An advanced Unmanned Aerial Vehicle (UAV) approach via learning-based control for overhead power line monitoring: a comprehensive review. IEEE Access. 2021;9:130410–33.
- 17. Saif A, Dimyati K, Noordin KA, Mosali NA, Deepak GC, Alsamhi SH. Skyward bound: empowering disaster resilience with multi-UAV-assisted B5G networks for enhanced connectivity and energy efficiency. IoT. 2023;23:100885.
- 18. Rodriguez JC, Grijalva F, García M, Chérrez Barragán DE, Acuña Acurio BA, Carvajal H. Wireless communication technologies for smart grid distribution networks. XXXI Conference on Electrical and Electronic Engineering. Basel Switzerland: MDPI; 2023. 7 p.
- 19. Alanezi MA, Shahriar MS, Hasan MdB, Ahmed S, Sha’aban YA, Bouchekara HREH. Livestock management with unmanned aerial vehicles: a review. IEEE Access. 2022;10:45001–28.
- 20. Pagano A, Croce D, Tinnirello I, Vitale G. A survey on LoRa for smart agriculture: current trends and future perspectives. IEEE Internet Things J. 2023;10(4):3664–79.
- 21. Nancy B, Gary Loh CW, Bazin MRazi, Panceras TM. A case study: broadband over powerline for rural area deployment in Sarawak. E3S Web Conf. 2021;242:03001.
- 22. Lazaropoulos AG, Leligou HC. Fiber optics and broadband over power lines in smart grid: a communications system architecture for overhead high-voltage, medium-voltage and low-voltage power grids. PIER B. 2022;95:185–205.
- 23. Morchid A, Oughannou Z, Khalid HM, Qjidaa H, El Alami R, Siano P. Fire risk assessment system for food and sustainable farming using ai and IoT technologies: Benefits and challenges. IoT. 2025;33:101704.
- 24. Singh AK, Gupta S. Agriculture and the use of Unmanned Aerial Vehicles (UAVs). In: Advances in aerial sensing and imaging. Wiley; 2024. p. 87–108.
- 25. Hristov H, Dimitrov K. Investigating the influence of the environment on the detection and monitoring of cattle with an unmanned aerial vehicle using infrared radiometry. 2024 32nd National Conference with International Participation (TELECOM). IEEE; 2024. p. 1–4.
- 26. Lopez-Cueva M, Apaza-Cutipa R, Araujo-Cotacallpa RL, Sasank VVS, Rangasamy R, Sengan S. A multi moving target localization in agricultural farmlands by employing optimized cooperative unmanned aerial vehicle swarm. SCPE. 2024;25(6).
- 27. Wang L, Zhang X, Qin K, Wang Z, Zhou J, Song D. AoI Analysis of Satellite–UAV Synergy Real-Time Remote Sensing System. Remote Sens. 2024;16(17):3305.
- 28. Li J, Ling M, Fu B, Dong Y, Mo W, Lin K, et al. UAV based smart grazing: a prototype of space-air-ground integrated grazing IoT networks in Qinghai-Tibet plateau. Discov Internet Things. 2025;5(1):17.
- 29. Galli S, Scaglione A, Wang Z. For the grid and through the grid: the role of power line communications in the smart grid. Proc IEEE. 2011;99(6):998–1027.
- 30. Ferreira HC, Grove HM, Hooijen O, Han Vinck AJ. Power line communications: an overview. Proceedings of IEEE AFRICON ’96. IEEE. p. 558–63.
- 31. Lampe L, Tonello AM, Swart TG, editors. Power line communications. Wiley; 2016.
- 32. Kakamoukas GA, Lagkas TD, Argyriou V, Goudos SK, Radoglou-Grammatikis P, Bibi S, et al. A novel air-to-ground communication scheme for advanced big data collection in smart farming using UAVs. IEEE Access. 2025;13:16564–83.
- 33. Shen P, Wang F, Luo W, Zhao Y, Li L, Zhang G, et al. Based on improved joint detection and tracking of UAV for multi-target detection of livestock. Heliyon. 2024;10(19):e38316. pmid:39403468
- 34. Pereira DS, De Morais MR, Nascimento LBP, Alsina PJ, Santos VitorG, Fernandes DHS, et al. Zigbee protocol-based communication network for multi-unmanned aerial vehicle networks. IEEE Access. 2020;8:57762–71.
- 35. Khan M, Qureshi I, Khanzada F. A hybrid communication scheme for efficient and low-cost deployment of future flying ad-hoc network (FANET). Drones. 2019;3(1):16.
- 36. Bacco M, Berton A, Gotta A, Caviglione L. IEEE 802.15.4 air-ground UAV communications in smart farming scenarios. IEEE Commun Lett. 2018;22(9):1910–3.
- 37. Yao Y, Dong D, Cai C, Huang S, Yuan X, Gong X. Multi-UAV-assisted Internet of Remote Things communication within satellite–aerial–terrestrial integrated network. EURASIP J Adv Signal Process. 2024;2024(1):10.
- 38. Eltokhy M, El-Rifaie AM, Gamal HA, Haggag A, Ali H, Youssef AAF, et al. Integrating Wi-Fi, Li-Fi, and BPL technologies for a secure indoor communication system. Sensors (Basel). 2024;24(24):8105. pmid:39771840
- 39. Stolaroff JK, Samaras C, O’Neill ER, Lubers A, Mitchell AS, Ceperley D. Energy use and life cycle greenhouse gas emissions of drones for commercial package delivery. Nat Commun. 2018;9(1):409. pmid:29440638
- 40. Alanezi MA, Sadiq BO, Sha’aban YA, Bouchekara HREH. Livestock management on grazing field: a FANET based approach. Appl Sci. 2022;12(13):6654.