Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Open Access

Correction

Correction: The force at the implant cannot be assessed by the mallet force–Unless supported by a model

  • Peter J. Schlieker,
  • Michael M. Morlock,
  • Gerd Huber

In Table 2, the damping parameter for the impactor tip has incorrect unit. The correct unit should be 0.24 Ns/mm. Please see the correct Table 2 here.

thumbnail
Download:
Table 2. Parameters of the numerical model including the results of the parameter estimation.

https://doi.org/10.1371/journal.pone.0332707.t002

Reference

  1. 1. Schlieker PJ, Morlock MM, Huber G. The force at the implant cannot be assessed by the mallet force–Unless supported by a model. PLoS ONE. 2024;19(5):e0303682. pmid:38758920

Citation: Schlieker PJ, Morlock MM, Huber G (2025) Correction: The force at the implant cannot be assessed by the mallet force–Unless supported by a model. PLoS One 20(9): e0332707. https://doi.org/10.1371/journal.pone.0332707

Published: September 17, 2025

Copyright: © 2025 Schlieker et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.