Figures
Abstract
Although sensor technology has advanced with better materials, biomarkers, and fabrication and detection methods, creating a rapid, accurate, and affordable bacterial detection platform is still a major challenge. In this study, we present a combination of hybrid-MoS2 nanosheets and an amine-customized probe to develop a fast, sensitive biosensor for Bacillus subtilis DNA detection. Based on fluorescence measurements, the biosensor exhibits a detection range of 23.6–130 aM, achieves a detection limit of 18.7 aM, and was stable over four weeks. In addition, the high selectivity over Escherichia coli and Vibrio proteolyticus DNAs of the proposed Bacillus subtilis sensors is demonstrated by the fluorescence quenching effect at 558 nm. This research not only presents a powerful tool for B. subtilis DNA detection but also significantly contributes to the advancement of hybrid 2D nanomaterial-based biosensors, offering substantial promise for diverse applications in biomedical research and environmental monitoring.
Citation: Nguyen SH, Nguyen V-N, Tran MT (2024) Bacillus subtilis DNA fluorescent sensors based on hybrid MoS2 nanosheets. PLoS ONE 19(2): e0297581. https://doi.org/10.1371/journal.pone.0297581
Editor: Niravkumar Joshi, Federal University of ABC, BRAZIL
Received: November 6, 2023; Accepted: January 8, 2024; Published: February 1, 2024
Copyright: © 2024 Nguyen et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper.
Funding: This research is funded by Hanoi University of Science and Technology (HUST) under project number T2023-PC-016. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Bacillus subtilis, a gram-positive bacterium ubiquitously presented in soil and the gastrointestinal tract, plays a pivotal role across various sectors, necessitating its precise detection. As a key player in industrial biotechnology, B. subtilis is used in producing enzymes, antibiotics, and other biologically active compounds, making its accurate detection crucial for ensuring product quality and safety [1–4]. In the food industry, B. subtilis detection is vital due to its potential role in food spoilage, especially considering its spore-forming capabilities that allow survival under adverse conditions [5,6]. For the scientific community, B. subtilis serves as a model organism for genetic and biochemical research, necessitating its precise quantification [7,8]. Moreover, though predominantly non-pathogenic, monitoring B. subtilis is essential in healthcare settings to circumvent potential infections among immunocompromised individuals [9]. Therefore, the comprehensive role and impact of B. subtilis necessitate the development of precise and robust detection mechanisms.
The conventional methods to detect B. subtilis are microbial culture techniques, staining procedures, and molecular methods such as polymerase chain reaction (PCR) [10,11]. Microbial culturing, while a gold standard, often requires a significant duration to yield results, which may not always be compatible with real-time monitoring or immediate needs. Staining procedures, such as the Gram stain, while offering quicker results, may lack specificity. On the molecular front, PCR is a powerful tool for detecting and identifying B. subtilis. However, it demands sophisticated equipment and technical expertise, challenging routine, and on-field applications. These inherent shortcomings indicate an unmet need for a rapid, specific, and user-friendly method for detecting B. subtilis, such as a point-of-care device or biosensor.
Biosensors based on nanomaterials have emerged as a compelling alternative in the quest for more efficient, rapid, and reliable methods to detect biological molecules, including DNA, proteins, and cells [12,13]. They have widespread applications in diverse fields, such as clinical diagnosis, environmental monitoring, and food safety. While biosensors can be engineered to detect various signals, their primary function is quantifying a specific entity’s concentration. The scientific community has mainly concentrated on electrochemical and optical biosensors for analyte detection [14,15]. Especially, optical DNA biosensors boast several benefits in biotechnology and medical diagnostics, including high sensitivity and specificity, real-time and label-free detection, and portability [16–18]. As technology progresses, enhancements in these optical biosensors’ sensitivity, specificity, and portability continue to be achieved. Methods to elevate the sensitivity and selectivity of optical DNA sensors include the fabrication of innovative nanomaterials, the development of new sensing platforms, and optimizing sensor preparation parameters.
Recently, the use of molybdenum disulfide (MoS2) nanosheets in detecting DNA, including that of B. subtilis, has gained considerable research attention due to its unique properties, such as electrical, mechanical, and optical characteristics [19–21]. The high surface area of these 2D nanosheets allows for the effective immobilization of probe DNA, facilitating efficient hybridization with target DNA sequences. In addition, hybrid MoS2 nanosheets combined with other nanomaterials can further enhance the sensing performance by exploiting the synergistic effects. Hybrid MoS2 nanosheets hold several advantages over their pure counterparts, including improved sensitivity, selectivity, stability, and an extended range of analytes that can be detected [22–24]. Thus, applying this hybrid material in optical biosensors represents an intriguing research avenue. In a previous report [25], hybrid MoS2 demonstrated a strong capability for E. coli DNA detection. Here, we develop a new sensing platform using hybrid MoS2 nanosheets to detect B. subtilis DNA within the 23.6–130 aM range. The influence of sensing material concentrations on the sensitivity of a hybrid MoS2-based sensor designed for B. subtilis detection is also investigated. In addition, we examine the selectivity of the proposed sensors over two other bacterial DNA, including E. coli and V. proteolyticus, and the stability of the proposed sensors over a month.
Method and materials
Chemical and preparation of hybrid MoS2 nanosheets
The chemicals and preparation methodologies have been thoroughly outlined in the previous study [25] and illustrated in Fig 1. We used the chemicals without any further purification as follows: Ammonium Heptamolybdate Tetrahydrate ((NH4)6Mo7O24.4H2O, 99.0%, from Tianjin Chemical Reagent Factory, Tianjin, China), Thioacetamide (C2H5NS, 99.0%, from Shanghai Zhanyun Chemical Co., Ltd, Shanghai, China), Ethanol (C2H5OH, 99.5%, from Xilong Scientific Co., Ltd., Guangdong, China), and deionized (DI) water. Briefly, we used the hydrothermal method to prepare hybrid MoS2 nanosheets. We dissolved and mixed two precursor chemicals of (NH4)6Mo7O24.4H2O and C2H5NS in 20 mL of deionized water. After that, 20 mL ethanol was gradually added and stirred for 30 minutes. The solid product was transferred to a 200 mL Teflon-lined stainless-steel autoclave. The hydrothermal temperature was set at 180° C for 5 hours. After this process was done. The precipitation was collected by centrifugation at 5000 rpm, washed with DI water, and dried in a vacuum at 60°C for 3 hours.
DNA extraction
The B. subtilis strain was obtained from the Microbiology and Genetics Lab at the Hanoi University of Science and Technology in Hanoi, Vietnam. Starting with 1.5 mL of an overnight B. subtilis culture grown in Luria Broth (LB) medium, the cells are first pelleted by centrifuging at 8,000×g for 5 minutes using a Hettich Mikro 200R centrifuge (Tuttlingen, Germany). The supernatant is discarded, and the resulting cell pellet is resuspended in 740 μL of TE buffer. Subsequently, 20 μL of 100 mg/mL Lysozyme is added to break down the cell wall, then an incubation occurred at 37°C for 30 minutes. Next, 40 μL of 10% SDS and 8 μL of Proteinase K (10 mg/mL) (all from Biobasic, Canada) are introduced, assisting in protein digestion and membrane disruption. After a further incubation at 56°C for 3 hours, 100 μL of 5 M NaCl and heated CTAB/NaCl (from Merck, Germany) at 65°C are added sequentially to promote DNA precipitation. After an incubation at 65°C for 10 minutes, the sample undergoes a chloroform: isoamyl alcohol extraction (from Sigma Aldrich) to separate the DNA from impurities. After centrifuging at 12,000×g for 10 minutes at room temperature, the aqueous phase containing the DNA is transferred to a new tube. This extraction step is repeated until no white protein layer is visible. The DNA is then precipitated using cold 100% ethanol (Merck, Germany) and incubated at -20°C for 2 hours overnight. After additional centrifugation at 12,000×g for 15 minutes at 4°C, the DNA pellet is washed with 50 μL of 70% ethanol to remove salts and other impurities. Once the pellet dries, it’s resuspended in the TE buffer for storage. Ideally, the isolated DNA should be stored at −20°C for future use. All the DNA utilized in this study was evaluated using the OD260/280 ratios using a DeNovix UV-Visible spectrometer (Model: DS-11 FX+), yielding results around 2.0, indicating the high purity of the DNA samples.
Measuring the optical properties of B. subtilis DNA sensors based on hybrid MoS2 nanosheets
This study utilized an oligonucleotide probe with the sequence amine—5’-CCTACGGGAGGCAGCAGTAG-3’, complementary to B. subtilis DNA [8]. The probe was diluted to 30 nM in TE buffer in all measurements. DNA solutions were prepared by dissolving and diluting them in 1×TE buffer (10 mM Tris-HCl, 1 mM EDTA, pH 8.0). B. subtilis DNA was pretreated using the heating method, which involved heating the samples at 95°C for 30 minutes. For a specific test, designated concentrations of the probe and hybrid MoS2 nanosheets were utilized to determine the sensors’ absorbance and photoluminescence (PL). We incorporated 900 μL of hybrid MoS2 into a 10 mm cuvette, with TE buffer as the solvent. We then added 100 μL of the probe and gradually added 100 μL DNA to the cuvette to create concentrations ranging from 23.6 to 130 aM. At each step, PL measurements were performed. The fluorescence intensities at an excitation wavelength of white light, using a slit width of 300 μm and an exposure duration of 1 second, were recorded. To investigate the effects of the sensing materials, the experiment is repeated with varying concentrations of hybrid MoS2 (10 mg/L, 20 mg/L, 30 mg/L, 40 mg/L, and 50 mg/L).
Results and discussions
Characterizations of prepared materials
The produced materials were initially assessed for their structure and morphology using XRD and SEM imaging techniques. As illustrated in Fig 2A, these materials reveal a nanosheet structure. The XRD pattern, displayed in Fig 2B, presents five unique peaks at positions (101), (012), (015), (110), and (113), suggestive of the MoS2-3R structure (PDF#17–0744, as analyzed with JADE software by MDI Materials Data). The resulting composite was also detected alongside MoS2-3R, (NH4)6Mo7O24. However, the SEM image, shown in Fig 2A, emphasizes the existence of multilayer nanosheets within the hybrid material. This observation suggests that (NH4)6Mo7O24 plays a critical role in creating the lamellar MoS2, with NH4+ ions occupying the layers in between and indicates that (NH4)6Mo7O24 either functionalizes the MoS2 surface or decomposes into molecules. Furthermore, we explored the optical properties of the manufactured materials. An absorbance peak at 235 nm and a photoluminescence peak at 558 nm can be observed in Fig 2C.
(A) The SEM image captured by HITACHI-S4800 confirms the nanosheet morphology (inside the green region of interest); the contrast was enhanced. (B) The XRD pattern obtained by Rigaku MiniFlex600, and (C) The absorbance and photoluminescence attributes. Absorbance (blue line) was determined using a DeNovix UV-Visible spectrometer (Model: DS-11 FX+). The fluorescence intensities (orange line) were recorded using a spectrophotometer with a 10 nm slit-width (SpectraPro HRS-300, Teledyne Princeton Instruments, Trenton, NJ 08619 USA) at an excitation wavelength of white light and an exposure duration of 1 second.
Direct detection of B. subtilis DNA using fluorescent sensors based on the hybrid MoS2 nanosheets
This study aims to design a simple optical sensing platform to detect a range of B. subtilis DNA concentrated from 23.6 to 130 aM, reflected by the number of copies of the testing sample from 16×106 to 16×107. In our experiment, the probe concentration was 30 nM (using 100 μL, which contains 1.83×1012 copies, a much more considerable amount than the number of ssDNA copies) and the concentration of sensing materials was varied. The sensors’ fluorescence was examined at hybrid MoS2 concentrations of 10 mg/L, 20 mg/L, 30 mg/L, 40 mg/L, and 50 mg/L, and was presented in Fig 3.
(A) PL spectra of sensors based on 30 mg/L MoS2 while in contact with various B. subtilis DNA concentrations. When the DNA concentrations increased, the maximum intensities decreased. (B) The PL intensities of different sensors with multiple concentrations of hybrid MoS2 nanosheets before in contact with B. subtilis DNA; The higher the sensing material concentration, the higher the PL. (C) The dependence of the intensities I at 558 nm of different sensors on the B. subtilis DNA concentrations. This relationship can be described by a linear function. (D) The ratios I/I0 derived from the intensity at 558 nm of different sensors depending linearly on the DNA concentrations, where I0 is the intensity of the sensor before contact with DNA. The error bars represent for standard deviations of nine measurements.
Fig 3A shows an example of PL spectra of sensors based on 30 mg/L hybrid MoS2 nanosheets in contact with B. subtilis DNA. The other MoS2 concentration sensors had similar shapes and quenching effects with DNA concentrations increased. They all had fluorescent peaks at 558 nm. The fluorescence spectra of all sensors based on 10 mg/L to 50 mg/L hybrid MoS2 before adding DNA are presented in Fig 3B. Based on the intensity I and the ratio I/I0 at the wavelength 558 nm, we established the calibration lines of I vs C and I/I0 vs. C in Fig 3C & 3D, where I is the intensity of sensors with specific concentration of DNA; I0 is the initial fluorescent intensity of sensors; C is the concentration of B. subtilis (aM). The operating functions were estimated and shown in Table 1. All sensors can operate linearly with high precision (all values of R2 were about 0.98). Among them, the sensors based on 50 mg/L have the highest sensitivity with the highest slope of -325. However, the 30 mg/L MoS2-based sensors have the best detection limit (LOD) of 18.7 aM and high sensitivity (slope of -233.8). In Table 1, the equation determined the limit of detection is LOD = blank signal + 3 standard derivations. Overall, the detection limits are slightly different, about 19 aM. That might be because the sensing material’s concentration is not much different (10 mg/L to 50 mg/L, only 40 mg/L difference).
B. subtilis DNA concentrations changed from 23.6 aM– 130 aM of five sensors with concentrations of hybrid MoS2 nanosheets of 10 mg/L, 20 mg/L, 30 mg/L, 40 mg/L and 50 mg/L. C is the concentration of B. subtilis DNA (aM).
In all experiments, the quenching effects have occurred and are reflected in the negative slopes of all operating functions. The quenching effect can be explained by the fact that in this study, we employed the NH2-5′-CCTACGGGAGGCAGCAGTAG-3′ probe to identify the complementary target B. subtilis DNA, adhering to the Watson-Crick base-pairing principles [8]. The probe was chemically modified with an amine group (NH2) to enhance bonding to the MoS2 surface. In the prepared nanomaterials, NH4+ ions occupying the layers in between either functionalize the MoS2 surface or help to bind with NH2- of the amine probe. Fig 4 provides a proposed schematic of the adsorbed single-stranded DNA (ssDNA) on the hybrid MoS2 surface. The ssDNA can adhere to this surface, altering the dielectric properties of MoS2. However, when the ssDNA hybridizes with its complementary DNA, the resultant double-stranded DNA (dsDNA) establishes poor contact with the hybrid MoS2, distancing itself from the MoS2 surface and changing the dielectric environment from DNA to water and reducing the photoluminescence [25]. The more complementary ssDNA added to the sensor, the more dsDNA was formed. Consequently, the photoluminescence was reduced more intensively. The intensity I at 558 nm, and the ratio of I/I0 at 558 nm can be used to estimate the unknown B. subtilis DNA concentrations.
To validate the operational performance of this sensor, we prepared various DNA concentrations exceeding the limit of detection (LOD) and within the range defined by the calibration line. The concentrations examined were 74.3 aM, 97.5 aM, and 115.6 aM. The corresponding fluorescence measurements are depicted in Fig 5A. Utilizing the fluorescence values at 558 nm into the calibration line in Fig 5B, we determined the measured concentrations listed in Table 2. The calibrated concentrations were in good agreement with the experimental concentrations with small percentages of difference (smaller than 10%). When the test sample had a high concentration, the measured intensity was higher, and the precision improved. For example, with the sample of 115.6 aM, the difference between the actual concentration and the calibrated one was only 1.52%. The result confirms the reliability and repeatability of our proposed sensor.
(A) The fluorescence spectra of testing DNA samples using the proposed sensors, including 74.3 aM, 97.5 aM, and 115.6 aM. (B) The fitting line of proposed sensors derived from the fluorescence of 30 mg/L MoS2-based sensors at 558 nm from Fig 3A. This operating line will refer to the calibrated concentrations for test samples. The error bars represent the standard deviations of nine measurements.
Selectivity and stability of the proposed sensors
In this section, the selectivity and stability of the proposed sensors are investigated. First, we recorded the fluorescence of B. subtilis DNA of concentration from 23.6 to 130 aM. The fluorescences when the proposed sensors were in contact with various TE buffer concentrations, were also measured. Fig 6A showed that the tested B. subtilis DNA concentrations had low fluorescence and were almost the same intensity of 1.1×104. Hence, our proposed sensors’ fluorescence changes in contact with B. subtilis DNA were not due to the changes in B. subtilis DNA fluorescence. To confirm the feasibility and selectivity of the proposed sensors, we prepared sensors based on 30 mg/L hybrid MoS2 nanosheets. These sensors were exposed to different analytes, including TE buffer, Vibrio proteolyticus DNA, and Escherichia coli DNA. The fluorescence spectra in Fig 6B–6D reveal that the spectra and the changes in intensity for TE buffer and mismatched DNAs (V. proteolyticus and E. coli DNA) were nearly identical and slightly different. The intensity was reduced from 4.7×104 to 4.0×104 for three analytes. In contrast, the intensity decreased significantly when the target was B. subtilis DNA from 4.7×104 to 2.0×104 (see Fig 3A). This suggests that the E. coli and V. proteolyticus DNA did not induce any changes and merely diluted the hybrid MoS2 suspension, mirroring the effect of added TE buffer. This observation aligns with Fig 6E & 6F, where the intensity I or ratio I/I0 at 558 nm for TE, V. proteolyticus, and E. coli overlapped and changed slightly. B. subtilis DNA concentration can be determined by the linear function, as shown in Fig 6, within a range of 23.6–130 aM with high precision (R2 = 0.98).
(A) Fluorescence spectra of different B. subtilis DNA concentrations; (B) Fluorescence spectra of 30 mg/L hybrid MoS2 based on the sensors when adding TE buffer. Legends represent added volumes equivalent to DNA concentrations; (C) Fluorescence spectra of proposed sensors in contact with V. proteolyticus DNA; (D) Fluorescence spectra of proposed sensors in contact with E. coli DNA; (E) Intensity changes at 558 nm corresponding to varying concentrations of added analytes derived from Fig 3A (for B. subtilis DNA) and Fig 6A–6D; (F) Ratios of I/I0 at 558 nm change with the concentrations of added analytes derived from Fig 3A (for B. subtilis DNA) and Fig 6A–6D. I0 is the fluorescence of sensors before adding DNA or TE. Error bars represent standard deviations calculated from 9 measurements.
For better visualization, the quenching effects were quantified by:
(1)
Fig 7 illustrates the quenching effect of the sensors when 130 aM analytes compared to the sensors’ photoluminescence before adding analytes. In the case of "ONLY B. subtilis DNA" the reference photoluminescence was the TE buffer. The quenching percentage of B. subtilis DNA was -1.12%, which means when adding DNA, the fluorescence enhanced. This enhancement is reasonable because the more DNA added, the higher the fluorescence was. However, with the maximum concentration of DNA, the increased intensity was deficient. The non-complementary DNA and TE buffer induced almost the same quenching percentage of 13%, representing the same diluting effect of adding these analytes. Only B. subtilis DNA, as we discussed above, had a significant quenching (%) of 55%. These findings validate that the proposed fluorescence sensors are functional and offer high sensitivity, reliability, and selectivity.
The bar plots illustrated the intensity changes at 558 nm between the analyte concentration of 0 aM and 130 aM. Four bars labeled with sensor—B. subtilis, sensor—E. coli, sensor—V. proteolyticus, and sensor—TE represent the proposed sensors’ experiments in contact with B. subtilis DNA, E. coli DNA, V. proteolyticus DNA, and TE buffer, respectively. The bar labeled with ONLY B. subtilis DNA was represented for fluorescence of DNA itself without the presence of the proposed sensors.
Furthermore, we explored the stability of the proposed sensors by repeating the tests of PL measurements of 30 mg/L hybrid MoS2-based sensors in contact with B. subtilis DNA every week over 4 weeks. The results of intensities at 558 nm depending on the DNA concentrations and quenching percentage were shown in Fig 8A and 8B, respectively. As observed from Fig 8A and 8B, the intensity of proposed sensors at 558 nm wavelength and quenching percentage were stable over four weeks. These results confirmed the high stability of our proposed sensors to B. subtilis DNA over time.
(A) The intensity of the proposed sensors at the wavelength of 558 nm changed to the concentrations of B. subtilis DNA over a month. (B) The quenching (%) histogram between the PL intensity at 558 nm wavelength of 130 aM sample and 0 aM sample over four weeks.
Our findings revealed that the relatively straightforward arrangement of an amine probe-hybrid MoS2 nanosheets demonstrated significant promise for the detection of B. subtilis DNA. The proposed sensors offered impressive sensitivity, stability, and specificity, with a detection range of 23.6 to 130 aM and a detection limit of 18.7 aM for 30 mg/L hybrid MoS2 nanosheet-based sensors. Notably, there’s been a lack of literature about Bacillus DNA sensors. The existing biosensors either have a higher detection limit, are built on costlier materials, and involve more intricate procedures. For instance, Fei Chen et al. designed optical biosensors to identify B. subtilis DNA with a detection limit of 105 CFU/mL, utilizing a combination of alkaline phosphatase/graphene oxide nanoconjugates and D-glucose-6-phosphate-functionalized gold nanoparticles [26]. Ivan Magnrina’s team presented a novel dual electrochemical genosensor for simultaneously amplifying and detecting Bacillus anthracis DNA, with a detection limit of 0.8 fM [27]. Zahra Izadi formulated an electrochemical DNA-based biosensor for Bacillus cereus detection employing an Au-nanoparticle-modified pencil graphite electrode with a detection limit of 9.4×10−12 M [28]. Mukhil Raveendran produced an electrochemical DNA biosensor to identify Bacillus anthracis, which leveraged a thiol probe anchored on gold-modified screen-printed electrodes and had a detection limit of 10 pM [29]. Furthermore, the utilization of hybrid MoS2 nanosheets is still in its infancy and remains largely untapped. Based on the authors’ understanding, there’s no documented evidence of using the innovative hybrid-MoS2 nanosheets and (NH4)6Mo7O24 materials to detect B. subtilis DNA. Our findings will likely pave the way for further research in pathogen detection applications, which are still in the nascent stages of development.
Conclusion
In conclusion, this study highlights the successful synthesis of novel hybrid-MoS2 nanosheets and their implementation in a sensor platform for detecting B. subtilis DNA. The sensor platform, comprising hybrid-MoS2 nanosheet-amine customized probe-B. subtilis DNA, demonstrated the ability to detect B. subtilis DNA within a range of 23.6–130 aM and a detection limit of 18.7 aM. The performance of the sensor platform was evaluated by altering the sensing material concentrations. Optimal conditions for the proposed sensors were determined as MoS2 at a concentration of 30 mg/L. The findings reveal that this sensing platform holds significant potential for fluorescence-based sensors, exhibiting high sensitivity, stability, specificity, and precision. This research advances hybrid 2D nanomaterial-based biosensors with potential biomedical research and environmental monitoring applications.
Acknowledgments
The authors thank other group members, including Nguyen Canh Huy and Le Hien Anh, for supporting this work.
References
- 1. Yin L-J, Lin H-H, Jiang S-T. Bioproperties of potent nattokinase from Bacillus subtilis YJ1. Journal of agricultural and food chemistry. 2010;58(9):5737–42.
- 2. Shuai Y, Zhang T, Mu W, Jiang B. Purification and characterization of γ-glutamyltranspeptidase from Bacillus subtilis SK11. 004. Journal of agricultural and food chemistry. 2011;59(11):6233–8.
- 3. Villegas-Escobar V, Ceballos I, Mira JJ, Argel LE, Orduz Peralta S, Romero-Tabarez M. Fengycin C produced by Bacillus subtilis EA-CB0015. Journal of natural products. 2013;76(4):503–9.
- 4. Kalpana BJ, Aarthy S, Pandian SK. Antibiofilm activity of α-amylase from Bacillus subtilis S8-18 against biofilm forming human bacterial pathogens. Applied biochemistry and biotechnology. 2012;167:1778–94.
- 5. Logan N. Bacillus and relatives in foodborne illness. Journal of applied microbiology. 2012;112(3):417–29. pmid:22121830
- 6. Pavic S, Brett M, Petric I, Lastre D, Smoljanovic M, Atkinson M. An outbreak of food poisoning in a kindergarten caused by milk powder containing toxigenic Bacillus subtilis and Bacillus licheniformis. Archiv für lebensmittelhygiene. 2005;56(1):20–2.
- 7. Sathiyanarayanan G, Kiran GS, Selvin J. Synthesis of silver nanoparticles by polysaccharide bioflocculant produced from marine Bacillus subtilis MSBN17. Colloids and Surfaces B: Biointerfaces. 2013;102:13–20.
- 8. Fernández-No I, Guarddon M, Böhme K, Cepeda A, Calo-Mata P, Barros-Velázquez J. Detection and quantification of spoilage and pathogenic Bacillus cereus, Bacillus subtilis and Bacillus licheniformis by real-time PCR. Food microbiology. 2011;28(3):605–10.
- 9. Yassin NA, Ahmad AM. Incidence and resistotyping profiles of Bacillus subtilis isolated from Azadi Teaching Hospital in Duhok City, Iraq. Mater Sociomed. 2012;24(3):194. pmid:23678324
- 10. Bartolini M, Grau R. Assessing different Ways of Bacillus subtilis spreading over Abiotic Surfaces. Bio-protocol. 2019;9(22):e3425–e.
- 11. Lu Z, Guo W, Liu C. Isolation, identification and characterization of novel Bacillus subtilis. Journal of Veterinary Medical Science. 2018;80(3):427–33.
- 12. Kessenikh AG, Novoyatlova US, Bazhenov SV, Stepanova EA, Khrulnova SA, Gnuchikh EY, et al. Constructing of Bacillus subtilis-based lux-biosensors with the use of stress-inducible promoters. International Journal of Molecular Sciences. 2021;22(17):9571.
- 13. Hu Y, Xu X, Liu Q, Wang L, Lin Z, Chen G. Ultrasensitive electrochemical biosensor for detection of DNA from Bacillus subtilis by coupling target-induced strand displacement and nicking endonuclease signal amplification. Analytical chemistry. 2014;86(17):8785–90.
- 14. Sołoducho J, Cabaj J. Electrochemical and optical biosensors in medical applications. Biosensors-Micro and Nanoscale Applications: IntechOpen; 2015.
- 15. Naresh V, Lee N. A review on biosensors and recent development of nanostructured materials-enabled biosensors. Sensors. 2021;21(4):1109. pmid:33562639
- 16. Altug H, Oh S-H, Maier SA, Homola J. Advances and applications of nanophotonic biosensors. Nature nanotechnology. 2022;17(1):5–16. pmid:35046571
- 17. Xu K, Huang J, Ye Z, Ying Y, Li Y. Recent development of nano-materials used in DNA biosensors. Sensors. 2009;9(7):5534–57. pmid:22346713
- 18. Li M, Li R, Li CM, Wu N. Electrochemical and optical biosensors based on nanomaterials and nanostructures: a review. Front Biosci (Schol Ed). 2011;3:1308–31. pmid:21622273
- 19. Mlinar V. Electronic and optical properties of nanostructured MoS2 materials: influence of reduced spatial dimensions and edge effects. Physical Chemistry Chemical Physics. 2017;19(24):15891–902. pmid:28589970
- 20. Li X, Zhu H. Two-dimensional MoS2: Properties, preparation, and applications. Journal of Materiomics. 2015;1(1):33–44.
- 21. Mia AK, Meyyappan M, Giri P. Two-dimensional transition metal dichalcogenide based biosensors: from fundamentals to healthcare applications. Biosensors. 2023;13(2):169. pmid:36831935
- 22. Mphuthi N, Sikhwivhilu L, Ray SS. Functionalization of 2D MoS2 nanosheets with various metal and metal oxide nanostructures: their properties and application in electrochemical sensors. Biosensors. 2022;12(6):386.
- 23. Nehru R, Kumar BS, Chen C-W, Dong C-D. Sphere-like MoS2 nanosheet arrays/reduced graphene oxide hybrid electrocatalyst for accurate electrochemical monitoring of toxic pollutant. Journal of Environmental Chemical Engineering. 2022;10(6):108687.
- 24. Malagrino TR, Godoy AP, Barbosa JM, Lima AG, Sousa NC, Pedrotti JJ, et al. Multifunctional Hybrid MoS2-PEGylated/Au Nanostructures with Potential Theranostic Applications in Biomedicine. Nanomaterials. 2022;12(12):2053.
- 25. Nguyen SH, Vu PKT, Tran MT. Absorbance biosensors-based hybrid MoS2 nanosheets for Escherichia coli detection. Scientific Reports. 2023;13(1):10235.
- 26. Chen F, Chen D, Deng T, Li J. Combination of alkaline phosphatase/graphene oxide nanoconjugates and D-glucose-6-phosphate–functionalized gold nanoparticles for the rapid colorimetric assay of pathogenic bacteria. Biosensors and Bioelectronics. 2022;216:114611. pmid:35985060
- 27. Magriñá I, Jauset-Rubio M, Ortiz M, Tomaso H, Simonova A, Hocek M, et al. Duplex electrochemical DNA sensor to detect Bacillus anthracis CAP and PAG DNA targets based on the incorporation of tailed primers and ferrocene-labeled dATP. ACS omega. 2019;4(26):21900–8.
- 28. Izadi Z, Sheikh-Zeinoddin M, Ensafi AA, Soleimanian-Zad S. Fabrication of an electrochemical DNA-based biosensor for Bacillus cereus detection in milk and infant formula. Biosensors and Bioelectronics. 2016;80:582–9.
- 29. Raveendran M, Andrade AF, Gonzalez-Rodriguez J. Selective and sensitive electrochemical DNA biosensor for the detection of Bacillus anthracis. International Journal of Electrochemical Science. 2016;11:763–76.