https://orcid.org/0000-0003-2303-8151
Figures
Abstract
The efficiency with which conventional boilers perform, in terms of sustainability, is affected by a variety of factors. Unsustainable boiler operating practices are still surprisingly frequent in developing countries, resulting in environmental liabilities and catastrophic accidents. It is a serious problem in developing countries like Bangladesh, where boilers are utilized extensively in the apparel manufacturing sector. However, no research has yet examined the challenges or barriers associated with sustainable boiler operation in the apparel manufacturing sector. This study, thereby, utilizes an integrated MCDM approach, combining the fuzzy theory and the decision-making trial and evaluation laboratory (DEMATEL) method, to identify, prioritize, and explore the relations among the barriers to sustainable boiler operation in the apparel manufacturing industry, from an emerging economy perspective. The barriers were initially identified from the literature and a visual survey of 127 factories. After expert validation, thirteen barriers were finally selected to be analyzed utilizing the fuzzy DEMATEL method. The study findings revealed that ’Absence of water treatment facilities’, ’Fossil fuel burning and GHG emissions’, and ’Excessive consumption of groundwater’ are the three most prominent barriers to sustainable boiler operation. The cause-effect relations among the barriers suggest that ’Inadequate compliance with safety and hazard regulations’ is the most influential and ’Fossil fuel burning and GHG emissions’ is the most influenced barrier. This study is expected to guide the managers and policymakers of the apparel manufacturing sector in successfully overcoming the barriers to sustainable boiler operation, thus mitigating the operational hazards and achieving the sustainable development goals (SDGs).
Citation: Siraj MT, Debnath B, Kumar A, Bari ABMM, Samadhiya A, Payel SB (2023) Evaluating barriers to sustainable boiler operation in the apparel manufacturing industry: Implications for mitigating operational hazards in the emerging economies. PLoS ONE 18(4): e0284423. https://doi.org/10.1371/journal.pone.0284423
Editor: Ibrahim Badi, Libyan Academy, LIBYA
Received: March 1, 2023; Accepted: March 27, 2023; Published: April 14, 2023
Copyright: © 2023 Siraj et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the manuscript and its Supporting information files.
Funding: The authors received no specific funding for this work.
Competing interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
1 Introduction
Industrial steam boilers are one of the essential components for the apparel manufacturing industries to produce steam for washing, drying, and ironing clothes [1]. Due to its indispensability in manufacturing, all the apparel industries install boilers in their production facilities. However, steam boilers consume a significant portion of energy and natural resource like water [2], and like most other heat-generating mechanical devices, it can negatively impact the environment, creating several criticalities to achieving sustainability [3, 4]. Global energy supply disruption due to unexpected situations like the COVID-19 pandemic or political upheavals like the Russia-Ukraine war is influencing policymakers to rethink and reconstruct conventional energy infrastructures [5, 6]. Like many other industries, the apparel manufacturing sector is also affected severely by these global energy crises, especially the countries with developing economies [7, 8]. Achieving sustainability in fuel-consuming utility machines like boiler operations in emerging economies can be groundbreaking in this context, effectively reducing the energy crisis and minimizing environmental impact.
The apparel manufacturing industry of Bangladesh is not only the highest revenue-earning sector for this emerging economic country but also one of the largest apparel manufacturing sectors in the world [9, 10]. This industry has contributed to around 85% of the country’s total export earnings in the last few decades and has established itself as a significant global player in this sector [11]. In this era of the fourth industrial revolution (Industry 4.0), to carry on with the achieved progress in the apparel sector, Bangladesh must broaden its focus to attain economic, social, and environmental sustainability in this sector. However, the apparel manufacturing industry heavily depends on steam boilers in their production processes. Hence, barriers to sustainable boiler operation can be considered a hindrance to achieving sustainability in this sector.
Over the last few years, researchers and practitioners have attempted to identify the factors of sustainable boiler operation in various ways. For instance, Rahman et al. [1] analyzed the causes of boiler accidents in the apparel industry to achieve workplace safety to ensure social and economic sustainability and identified non-standard boiler operation as one of the apparel industry’s main causative factors for boiler accidents. Bozzuto [12] described the critical success factors for sustainable boiler operations and emphasized skilled boiler operators for sustainable boiler operations. Moreover, Ranaraja et al. [13] explored the operating factors required to optimize the boiler’s performance and minimize energy consumption. Their study also focused on water quality improvement to get the optimum output from a boiler. Behzad et al. [14] tried to improve the sustainability of boiler operations by executing a maintenance strategy based on condition monitoring, periodic inspection, and predictive maintenance. Likewise, Patil et al. [15] proposed a reliability-centered maintenance approach to make the boiler operation economically sustainable. The study indicated that combined periodic and predictive maintenance might reduce a boiler’s operational cost. Kundakcı [16] applied a hybrid multi-criteria decision-making approach to finding the best boiler for sustainable operation and depicted steam generating cost as the most weighted criteria for boiler selection. Again, Li et al. [17] analyzed different fuel types in boiler operations to determine how they influence economic and environmental sustainability. Consequently, they showed the necessity of renewable energy to increase operational sustainability in boiler operations. Amid this situation, studying the barriers to sustainable boiler operation in the Bangladeshi apparel manufacturing industry context will convey valuable insights for all other emerging economies and thus can significantly contribute to achieving several sustainable development goals (SDGs).
Several recent research also explored different sustainability dimensions of boiler operations as follows: the safety factors of boiler operation to obtain social sustainability [18–20]; the fuel and other cost minimization strategies to obtain economic sustainability [21–23]; and the emission reduction and water consumption reduction strategies to obtain environmental sustainability [24, 25]. However, no study has considered achieving overall sustainability in boiler operation. Besides this, no previous work identified the barriers to sustainable boiler operation in the apparel manufacturing industry and explored cause-effect relationships among them to assist practitioners and decision-makers of emerging economies in mitigating these issues, which exposes a significant gap in the literature. Therefore, this study intends to fill this research gap by addressing the following research questions (RQs):
- RQ1: What are the barriers that hinder the adoption of efficient practices in boiler operations to achieve sustainability in the apparel manufacturing industry?
- RQ3: What are the most significant barriers to sustainable boiler operation in an emerging economy?
- RQ3: How do the cause-effect interactions of the identified barriers influence each other in the context examined?
To fulfill the RQs mentioned above, this study outlines the following research objectives (ROs):
- RO1: To identify the significant barriers to sustainable boiler operation in the apparel manufacturing industry.
- RO2: To prioritize and categorize the identified barriers depending on their significance level in restricting the application of sustainable boiler operations.
- RO3: To examine the correlations among the barriers and investigate their sustainability implications.
To accomplish the ROs, the barriers were initially determined by a systematic literature review, visual surveys, and factory inspection records. Later, these barriers were verified with the participation of relevant experts. Subsequently, the finalized barriers’ hierarchy and cause-effect linkages were evaluated using a combination of fuzzy set theory and the Decision-Making Trial and Evaluation Laboratory (DEMATEL) technique.
The conventional DEMATEL method can help prioritize and identify correlations amongst barriers, but it can not address the uncertainty and ambiguity in the expert’s feedback. Compared to the interpretive structural modeling (ISM) technique, DEMATEL enables an increased and broader assessment of underlying causes. For instance, whereas ISM only supports 0–1 interactions, DEMATEL allows bidirectional multi-number correlations [26]. However, a fuzzy-based decision-making framework can effectively minimize the uncertainty of human decision-making approaches [27, 28]. The key benefit of fuzzy DEMATEL is its ability to accommodate fuzziness and be agile while addressing uncertain instances [29]. In the fuzzy theory, analysts may quantify employing primal linguistics directly and using numerous membership function associations. The linguistic characterization is transformed into the analyst’s assessment score of the extent of the relationship or likelihood of the appearance of distinct phenomena [30].
Fuzzy DEMATEL is popular among researchers for providing prominence-based and cause-effect-based rankings [31]. This method has been used in several recent studies. For example, identifying cause-effect relationships among critical success factors for e-waste collection [32]; practices in a circular economy [33]; challenges to intelligent waste management [31]; barriers to sustainable food production [34] and so on. However, no previous study introduced the fuzzy DEMATEL methodology to analyze the barriers to the sustainable operation of any mechanical components used in any manufacturing industry, making this study unique.
The study considered exploring boiler operations of an emerging economic country like Bangladesh for two crucial reasons. First, emerging economies always have resource constraints compared while implementing sustainable practices, which can be expensive in many cases [35]. Second, the availability of methodically collected empirical data from industrial sectors is often limited in emerging economies like Bangladesh [1]. Considering this situation, a stratified strategy to mitigate the barriers to sustainable boiler operation one after another based on their prominence can be helpful for the decision-makers [27], and the analytical method of the study needs to utilize experts’ feedback due to the lack of availability of sufficient empirical data and directly relevant literature [36].
The rest of the paper is structured as follows: Section 2 conceptualizes the barriers to sustainable boiler operation in the apparel industry. Section 3 describes the methodology and calculations; Section 4 presents the results. Section 5 discusses the obtained results and the implications of the study. Finally, section 6 concludes the study and offers some future research scopes.
2 Conceptualizing the barriers to sustainable boiler operation
In Bangladesh, the apparel manufacturing industry occupies a significant portion of this country’s overall industrial energy consumption. Fig 1 shows the approximate energy consumption scenario of the apparel industry analyzed by the Bangladesh government’s Sustainable and Renewable Energy Development Authority (SREDA) in 2022. According to a recent webinar by the SREDA and German development agency GIZ, the apparel industry of Bangladesh consumes approximately 3,740 kilotons of oil equivalent (KTOE) of energy annually that has an opportunity to save 1,159 KTOE through sustainable operation [37].
Energy loss from the steam generation and distribution system in the apparel industry of Bangladesh is much higher than the international standard, which causes an increase in fuel consumption, directly affecting the production cost and environmental performance [2]. As boilers are a significant source of energy and water consumption in the apparel industry, ensuring sustainable boiler operations will drive the country’s overall industrial sustainability [21]. Moreover, workplace safety is a significant pillar of achieving sustainability which is also hampered by boiler accidents due to non-standard operational practices [1].
In the existing industrial structure of steam production and consumption, there are several barriers to achieving sustainability in boiler operation. The office of the chief inspector of boilers (http://www.boiler.gov.bd/) is the only overseeing body from the Bangladesh government that enforce legal boiler operation in the country following the Boiler Act-1923 and Bangladesh Boiler Regulations (BBR)-1951 [19]. There are detailed standardized guidelines for boiler operations in these legislations, such as—permitting only certified boilers, ensuring certified boiler operators, using softened feedwater for the boilers, conducting preventive and periodic maintenance, and so on. However, in industrial practice, the actual scenario is unsatisfactory, and there is a lot of scope for improvement to ensure sustainable boiler operation. Since 2018, the "Accord on Fire and Building Safety in Bangladesh", a non-government regulatory organization, which is now named simply as "ACCORD", has been conducting boiler inspections in the apparel industry. Those inspections have identified several barriers, such as corrosion of boiler metal due to untreated water, increase in fuel consumption due to scale formation, heat loss from uninsulated heating surface, water leakage, symptoms of unburnt fuel, and so on [39]. Fig 2 depicts some pictorial evidence of the barriers to sustainable boiler operation in the apparel industry found during boiler inspections by the ACCORD.
Several studies have also determined various barriers to sustainable boiler operation, which are relevant in the context of the Bangladeshi apparel industry. For instance, Hasan et al. [40] identified boiler explosions as a significant cause of industrial fire in apparel factories. A boiler explosion due to unsafe operation can cause fire and loss of life, hampering social and economic sustainability. Ali & Habibullah [19] reviewed the recent boiler accident case studies of the apparel industry and indicated that feeding direct groundwater to the boiler, lack of skilled workforce, and inadequate routine inspections are some of the primary reasons for unsustainable boiler operations. Paul & Alam [18] and Paul et al. [20] identified inadequate inspection facilities by the authority as one of the prime barriers to sustainable boiler operation in South Asian emerging economies. Hossan et al. [41] conducted a descriptive study and identified several causes and precautions for boiler explosions while emphasizing standard operations and maintenance practices to reduce boiler-related accidents. However, the abovementioned studies mainly focused on industrial safety and economic performance, not on social or environmental sustainability.
Moreover, Hasan et al. [42] discussed the impact of inefficient machinery on increasing fuel consumption in boiler operations. Old boilers generally lose their efficiency and consume more fuel which causes the emission of more carbon dioxide and other greenhouse gas (GHG), challenging environmental sustainability. Li et al. [17] suggested operating a boiler with renewable energy sources to reduce environmental hazards. However, Bangladesh’s renewable energy sources are not yet well-adopted [43]. Roushan [44] depicted that utilizing waste fabrics as a fuel instead of conventional fossil fuels can be cost-effective for boiler operation. However, the emission of greenhouse gas (GHG) is still a barrier to sustainability in such cases. Mamun et al. [9] and Haque et al. [45] denoted groundwater consumption without recycling it afterward as a barrier to economic and environmental sustainability. Therefore, blowdown is a mandatory operational process for a boiler where a vast amount of water is intentionally released after a time interval to improve the boiler’s performance. However, inadequate and improper recycling of blowdown water causes a lot of water wastage in the boiler operation. Besides, the natural groundwater level in Bangladesh is already declining. Hence, continuous pumping to lift this groundwater to be used in the boiler is imprudent and also responsible for extra energy consumption. Saha et al. [2] and Bukowska et al. [22] suggested that exhaust heat recovery systems such as water and air pre-heating or installing an economizer with a boiler can improve the cost-effective performance to a greater extent. An overview of the recent relevant studies has been presented in Table 1.
According to the above discussion, no study has attempted to identify the barriers to sustainability in boiler operations and find the causal relationships among those identified barriers to achieving SDGs in an emerging economy. Moreover, no study has established a contextual relationship among the discussed barriers either to assist the decision-makers. This demonstrates a significant gap in the relevant literature.
Several critical barriers to sustainable boiler operation could be conceptualized and accumulated from the existing studies and visual inspection reports, which can be analyzed in this research. Therefore, this study is expected to contribute to the prevailing literature in the following ways:
- Highlighting the critical barriers to sustainable boiler operation in the apparel manufacturing industry of Bangladesh.
- Developing a stratified ranking and categorization of the specified barriers to assist professionals and decision-makers in reducing the adverse impacts of these barriers.
- Employing a fuzzy DEMATEL-based framework to assess the causal linkages among the barriers.
- Conducting a sensitivity assessment to validate the viability of the presented methodology.
- Guiding inspectors, authorities, and policymakers of emerging economies in strategically ensuring sustainable operations in the apparel manufacturing sector.
2.1 Identification of barriers
For identifying the barriers in this study, besides reviewing the existing literature and analyzing the factory inspection report by the ACCORD [39], a visual survey in the boiler rooms of 127 apparel manufacturing factories situated at Mirpur, Tejgaon, and Savar industrial area in Dhaka Division, Bangladesh, has been conducted within a timeframe from March 2020 to August 2022. A team consisting of 6 mechanical engineers and two electrical engineers conducted this survey. This visual survey has validated multiple barriers to sustainable boiler operation, which were initially identified from the literature review. In addition, boiler rooms are found to be very congested, without proper ventilation facilities and other necessary safety features due to space constraints of the factories in the city areas. Improper ventilation and lack of oxygen flow in the boiler rooms can cause soot formation from unburnt fuel and increase fossil fuel consumption while operating the boiler [2]. Some evidence of congested boiler rooms observed during the visual survey is depicted in Fig 3.
Initially, a comprehensive literature analysis was carried out to identify the significant barriers to sustainable boiler operations in the apparel industry. The literature available in the Google Scholar and Sciencedirect database was reviewed for this purpose and was published between the years 2017 and 2023. Several key phrases were applied to search the barriers, such as: "Barriers to sustainable boiler operations," "Challenges to sustainability in boiler operation of the apparel industry," "Key obstacles to achieve sustainability in the garments industry of emerging economies," "Factors impeding the sustainability adoption in boiler operation in Bangladesh," and so on. The initial list of barriers to sustainable boiler operations identified from the literature search and visual inspection is provided in the S1 File as a questionnaire form. The form was subsequently distributed to the experts to validate the initially identified barriers.
3 Methodology and calculations
This research was designed with three basic steps: identification of the barriers, analyzing the barriers using the fuzzy DEMATEL method, and discussing the study’s implications. Fig 4 shows the proposed research methodology.
3.1 Finalization of the barriers to sustainable boiler operations
For this research, a panel of 12 industrial experts was formed to gather feedback via a semi-structured questionnaire provided via Google Forms (see the S1 File). The list of barriers to be analyzed using the fuzzy DEMATEL method was finalized by utilizing the experts’ feedback. The experts were chosen using purposive sampling to utilize their expertise in this study [46, 47]. In such sampling of experts in decision-making studies, the number of experts may vary based on the researcher’s scope [48, 49]. Unlike other convenient sampling methods, purposive sampling requires a qualified and competent evaluation of the sample’s appropriateness and a compelling argument that a particular group of respondents offers a reliable foundation for study findings [50, 51]. The inclusion criteria for the experts were to have at least a bachelor’s degree in mechanical/electrical/environmental engineering, at least ten years of working experience in the apparel industry, a good understanding of the questionnaire, and a willingness to participate in the survey. Twenty experts were invited to validate the initially identified barriers, among which twelve responded (60% response rate). Later, those twelve experts were invited again to evaluate barriers using the fuzzy DEMATEL method, and all of the twelve invited experts responded in this stage of feedback collection (100% response rate). A summary of the twelve participating experts’ profiles is presented in Table 2.
Initially, 13 critical barriers to sustainable boiler operation were identified (see the S1 File) from the literature review and the visual inspection report, which was later sent to the experts for validation, whether the identified barriers are relevant and significant to the context examined. Experts removed one barrier (Lack of automation) from the initial list and added one more barrier ("Inadequate supply and availability of spare parts"). According to the experts, most industrial boilers, boiler-related accessories, and water treatment systems operated in the Bangladeshi apparel industry are imported from foreign countries, which often leads to the inadequate availability of various necessary spare parts. Thus, 13 barriers were finally selected to be evaluated by using the fuzzy DEMATEL method, which is presented in Table 3. A concise description of these finalized barriers is provided in Table S1 of the S1 File.
3.2 Fuzzy DEMATEL method
The DEMATEL method is most commonly utilized to understand the structure of complex causal relationships through digraphs, and it has become very popular due to its simplicity of interpretation [53, 54]. The fuzzy set theory is often coupled with the conventional DEMATEL method to improve its responsiveness towards ambiguity arising from human judgment or expert feedback [55]. The fuzzy set theory has been discussed briefly in the S1 File. This study utilized a fuzzy DEMATEL-based framework to illustrate the cause-effect correlations among barriers and to overcome perceived ambiguity and uncertainty. Details procedure of the fuzzy-based DEMATEL framework that was applied in this study [32], has been discussed in the S1 File.
4 Results
The step-by-step calculations using the fuzzy DEMATEL method have been presented in the S1 File. In the S1 File, Table S2 shows the linguistic scale used to collect the experts’ feedback, Table S3 shows the aggregated direct-relationship matrix, Table S4 shows the de-fuzzified crisp direct-relation matrix, Table S5 shows the normalized crisp relation matrix, and Table S6 presents the total relation matrix “T”.
The prominence ranking of the barriers to sustainable boiler operation in the apparel manufacturing industry is shown in Table 4. The relative weights (RW) of the barriers can improve the visibility of the determined prioritization and depict the relative significance of one barrier over another.
Here, all the RWs are summed up to 1. The ranking of barriers is determined in descending order of the influence level (D+R) of each barrier. Hence, the ranking of barriers obtained in this study is: B5 > B3 > B9 > B11 > B8 > B6 > B10 > B13 > B1 > B2 > B4 > B7 > B12.
The causal ranking of the barriers is presented in Table 5. In that ranking, the barriers are divided into two groups, the cause group, and the effect group. Six barriers were found as causal barriers (where D-R > 0), and seven barriers were found as effect barriers (where D-R < 0). The barriers in the cause group are ranked as: B11 > B6 > B13 > B2 > B12 > B7. The barriers in the effect group are ranked as: B5 > B10 > B8 > B1 > B4 > B9 > B3.
Fig 5 presents a causal diagram generated using Tables 4 and 5. The diagram was drawn on the Cartesian Plane with D+R as X-axis and D-R as Y-axis. The barriers are clustered into four categories, driving category (C1), independent category (C2), critical category (C3), and impact category (C4). The driving barriers and critical barriers represent the cause group in these categories. On the other hand, the independent barriers and the impact barriers represent the effect group. C3 depicts the most influencing barriers as this category lies in the cause group and the high influence region. Policymakers must emphasize diminishing these barriers to mitigate the unsustainable practices of boiler operation in the apparel industry. On the other hand, C4 depicts the most affected barriers placed in the effect group.
The causal relationships among the barriers are presented in Fig 6. For 13 barriers, the maximum possible number of relationships is 13 × 13. Depicting this large number of relationships in a single diagram makes it visually complicated. Therefore, this study set a threshold value (θ = 0.0957) using equation (11) (see the S1 File).
4.1 Sensitivity analysis to check the robustness of the findings
Sensitivity analysis is a necessary experimental approach to checking the stability and robustness of a decision-making study [56]. There are several techniques to analyze the sensitivity of a study result [36, 57, 58]. This study followed the technique Akter et al. [36] described for analyzing the obtained result’s stability.
Initially, all the experts’ evaluation scores were equally weighted in this study. However, the educational backgrounds of the experts were different, which might create bias-ness and minimize the results’ credibility. Hence, this study imposed different weights on different educational backgrounds and created three case scenarios with similar evaluation scores from the experts. The three case scenarios of the sensitivity analysis by assigning different weights can be found in Table 6. The outcomes of the sensitivity analysis are presented in Figs 7–9.
Table 7 and Fig 10 compare the three case scenarios with the base result obtained in this study.
The sensitivity analysis shows very little variation in the causal values of the variables (see Fig 10 and Table 7), and their order within the group remained consistent across all scenarios and the base results. This consistency indicates the stability and robustness of the obtained result.
5 Discussions
According to the prominence ranking shown in Table 4, ’Absence of water treatment facilities (B5)’ carries the most significant among all the barriers to sustainable boiler operation. Many apparel manufacturing factories are not concerned about the quality of feedwater used for the boilers, which damages the physical condition of the boilers and is a major reason for many environmental and safety hazards in boiler operation [59, 60]. A boiler’s lifespan is negatively impacted by the presence of natural groundwater due to the presence of harmful substances, such as calcium and magnesium salts and iron ions, which cause metal degradation and scale development. This sort of internal damage might cause the boiler to lose efficiency or perhaps explode. Therefore, it is imperative for textile mills to prioritize the installation of water treatment facilities for boilers in order to reduce risks and maintain the long-term sustainability of boiler operations.
The second most significant barrier to sustainable boiler operation appears to be the ’Fossil fuel burning and GHG emissions (B3)’. Boilers in the apparel industries of emerging economies mostly burn fossil fuels to generate steam [44]. Part of the SDGs to safeguard the environment is to reduce the use of fossil fuels and the release of GHG. The boiler is one of the most fuel-intensive machinery components in the apparel manufacturing operation; this barrier has a detrimental effect on boiler sustainability, and by extension, on overall sustainability. As a result, we need to figure out how to use renewable energy sources instead of fossil fuels in more applications.
The third most important barrier is the ’Excessive consumption of groundwater (B9)’. Overexploting of groundwater has become a crucial challenge to attaining sustainability in many countries of the world [61]. Consuming excessive groundwater in industrial manufacturing destroys the ecosystem [62]. Effective measures, such as using recycled industrial water and water from natural water bodies like lakes or rivers after adequate treatment, can minimize the quantity of groundwater used by steam boilers in apparel manufacturing companies [2]. The apparel sector may boost its sustainability performance with the aid of these strategies.
The fourth most crucial barrier determined in this study is ’Inadequate compliance with safety and hazard regulations (B11)’. The practice of conducting regular inspections of the boilers to ensure safety and regulatory compliance is not very common in emerging economies due to various technical, financial, and socio-economic constraints [20, 41, 63]. But, developed countries always ensure regular inspections by different government and non-government authorities to establish standard operational practices, thus minimizing environmental and safety hazards [64, 65]. Therefore, government and industry owners of emerging economies should strive more to ensure compliance with the existing safety and hazard regulations to ensure sustainable boiler operations in the apparel industry.
’Not recycling blowdown water (B8)’ is the fifth most significant barrier to sustainable boiler operation. Boiler operation necessitates periodic "blowdown", in which part of the boiler’s water is drained and replaced with freshwater in order to keep the boiler water quality within the allowed range. In order to improve thermal efficiency and decrease the amount of dissolved particles in the boiler water, blowdown is an essential stage in boiler operation. However, a blowdown results in the loss of thermal energy and water [66, 67]. Moreover, releasing boiler water directly into the environment can cause chemical toxicity, which can be hazardous to the ecosystem [68]. Therefore, recycling blowdown water can improve energy efficiency and save the ecosystem. This way, recycling the blowdown water can enhance sustainability.
According to Table 5 and Fig 5, ’Inadequate compliance with safety and hazard regulations (B11)’ is observed to be the most impactful and influencing on other barriers among all causal barriers. This indicates following standardized rules and regulations can contribute to sustainable operation. Inadequate or no inspection can result in various non-compliance [65]. In such a situation, a highly sophisticated device like the boiler must be inspected regularly to ensure compliance with all the standards and safety practices [1]. Removing this causal barrier can directly influence removing other significant barriers to sustainable boiler operation.
’Lack of periodic inspection and preventive maintenance (B6)’ is discovered to be the second-ranked casual barrier. This barrier degrades the quality of regular operations and maintenance of the boiler. To find any fault instantly, boiler operators should regularly inspect the boiler room, fuel lines, and steam lines, reducing steam and energy loss and minimizing any safety hazards [69, 70]. Again, preventive maintenance is a part of maintenance activity that can increase the reliability of a boiler to a great extent [52, 71]. Hence, the practice of preventive maintenance should be adopted in the industry to ensure the safety and sustainability of boiler operations.
’Inadequate supply and availability of spare parts (B13)’ was found to be the third most significant causal barrier in this study. Inadequate supply and availability of spare parts cause import dependency on foreign countries for industrial components. This can directly hamper the routine maintenance of the boiler and thus can reduce its operational reliability and sustainability [72, 73].
’High dependency on nonrenewable energy sources (B2)’, ’Inadequate boiler room ventilation and safety measures (B12)’, and ’Absence of heat recovery system (B7)’ are the following three barriers from the causal ranking, respectively. The high dependency on nonrenewable energy sources is one of the significant barriers to achieving SDGs [43]. The absence of renewable fuels causes many unsustainable practices, including fossil fuel burning. In addition, most Bangladeshi apparel manufacturing factories are installed in very congested areas, for which boiler room ventilation and other safety measures are often inadequate. Proper ventilation can also reduce fuel consumption and GHG emissions [74]. Again, without proper ventilation, operators’ comfort in the boiler room is greatly hampered by the exceeding temperature, which is a significant safety concern. Besides these, heat recovery systems like preheaters, economizers, condensers, etc., are not usually utilized with boilers in the apparel manufacturing sector of emerging economies like Bangladesh. The absence of heat recovery systems can lead to many other problems, like increased fossil fuel consumption or increased GHG emission, which can negatively impact operational sustainability [75].
The seven effect barriers determined in this study (B5 > B10 > B8 > B1 > B4 > B9 > B3) are directly influenced by the six causal barriers. Barriers like ’Absence of water treatment facilities (B5)’ and ’Lack of skilled manpower (B10)’ are less impacted than other effect group barriers; instead, they are vital due to lying near the causal barriers. However, they are still influenced by the cause group barriers. For instance, ’Inadequate compliance with safety and hazard regulations (B11)’ can result in the ’absence of water treatment facilities (B5)’. In the standardized guidelines, installing a water treatment facility is mandatory to operate a boiler [19]. ’Inadequate supply and availability of spare parts (B13)’ also influences the ’Absence of water treatment facilities (B5)’, since the unavailability of components may discourage the management from setting up a new water treatment facility. Besides this, the ’Lack of skilled manpower (B10)’ is impacted by the ’Lack of periodic inspection and preventive maintenance (B6)’ and ’Inadequate compliance with safety and hazard regulations (B11)’. Periodic inspections and regular preventive maintenance can develop the operational, maintenance, and troubleshooting skills of the existing human resources of the industry. Moreover, industry owners will emphasize developing a skilled workforce if there is regular monitoring from legislative and law enforcement authorities.
’Not recycling blowdown water (B8)’ is strongly influenced by the casual barriers’ Inadequate compliance with safety and hazard regulations (B11)’ and ’Inadequate supply and availability of spare parts (B13)’. Interestingly, an effect barrier, ’absence of water treatment facilities (B5)’, also strongly influences that barrier. Recycling blowdown water is often considered a waste of money since it will require imported foreign components, which is a stereotype. Studies confirm that blowdown water recycling not only helps to save natural resources but also improves the economic performance of boiler operations [66, 67]. Factories often cannot recycle the blowdown water due to the absence of water treatment facilities.
Barriers like ’Usage of old and inefficient infrastructure (B1)’, ’Improper heat insulation (B4)’, ’Excessive consumption of groundwater (B9)’, and ’Fossil fuel burning and GHG emissions (B3)’ are strongly influenced by various causal barriers and some of the effect barriers. Therefore, these barriers were ranked last in the causal ranking in this study.
Fig 6 of this study depicts that ’Inadequate compliance with safety and hazard regulations (B11)’ has the most significant causal relationships with other barriers, and the causal barrier ’Lack of periodic inspection and preventive maintenance (B6)’ is also strongly related to other barriers. Therefore, management and policymakers should first emphasize removing these two barriers to facilitate sustainability attainment in boiler operations.
For the sensitivity analysis, experts’ experience level, job responsibilities, or educational level can be considered for imposing different weights [76]. This study considered the educational background of the experts while performing the sensitivity analysis. Clustering was conducted based on the same educational background (see Table 6 and Figs 7 to 9). A few minor variations were observed for different cases, which indicates the stability and robustness of the obtained results (see Table 7 and Fig 10).
The findings obtained from this study are significantly different from the other relevant studies. For instance, Rahman et al. [1] utilized the AHP method to explore the causes of boiler explosions in the apparel industry, which found a lack of standard legislation and non-standard boiler operation as the most critical causes of boiler accidents. Paul et al. [20] utilized descriptive statistics to identify the significant reasons for boiler explosions in developing South Asian countries. They identified non-compliance with standards, non-standard operations and maintenance, and shortage of skilled personnel as the most significant causes of boiler explosions. Hossan et al. [41] also utilized descriptive statistics to determine the causes of boiler accidents. They found ignorance of officials, lack of awareness, and lack of proper facilities to be the most critical causes of boiler accidents. In contrast to those studies, this research found that the most prominent barriers to sustainable boiler operations are the absence of water treatment facilities, fossil fuel burning and GHG emissions, and excessive consumption of groundwater. Moreover, no previous research focused on prioritizing the barriers to sustainable boiler operations and exploring the causal relationships among them, particularly in the apparel industry of an emerging economy. Therefore, the outcomes of this study are quite distinctive.
5.1 Theoretical implications
This study provides several important theoretical insights, which are as follows:
- Significant barriers to sustainable boiler operations in the apparel industry have been identified in this study. This research structure can be followed later to explore the barriers to other operational sustainability in different sectors.
- The study utilized the fuzzy DEMATEL approach to evaluate the identified barriers. The presented fuzzy theory-based technique can minimize the amount of ambiguity or inaccuracy in the dataset. The sensitivity analysis performed in this study also confirms the stability of the obtained results. This can provide future researchers important perspective on fuzzy theory-based techniques.
- The study ranks the barriers and explores the causal relationships among the barriers with visual representation. This ranking and the causal relations can guide future researchers in the relevant area.
5.2 Managerial and policy implication
The study has several important managerial and policy implications. For instance, the study findings suggest that the apparel manufacturing industry managers should emphasize developing preventative actions and measures to mitigate the boiler operation’s negative impacts and improve operational reliability and sustainability. Energy-efficient technology needs to be applied systematically in boiler operations, and developing a safe and hazard-free workplace for the workers is important as well to achieve sustainability.
The study’s findings point to some mitigation strategies for some significant barriers as well. For instance, one potential solution to overcome the "absence of water treatment facilities" in implementing sustainability in boiler operations is to use alternative water sources that do not require treatment, such as rainwater. Additionally, using closed-loop systems, where the water is recycled and reused within the boiler system, can also help reduce the need for water treatment. Again, proper blowdown control can minimize the total dissolved solids (TDS) in the boiler water. Regular monitoring and maintenance of the boiler water chemistry are also essential to ensure optimal boiler performance and sustainability.
To overcome issues like "fossil fuel burning and greenhouse gas (GHG) emissions", the industry can switch to renewable energy sources such as biomass, solar, or geothermal. The efficiency and emission reduction of traditional power plants can be improved by combining heat and power (CHP) systems that collect and use the heat that is often lost during the production of electricity. Improving boiler efficiency through regular maintenance, updating equipment, and using modern combustion processes can assist to minimise fuel use and emissions. The carbon dioxide (CO2) released by the boiler may be captured and stored underground using carbon capture and storage (CCS) technology. Emissions may be reduced with the aid of an energy management system that keeps tabs on the boiler’s power usage and adjusts settings as needed.
To overcome the issue of "excessive consumption of groundwater", alternative water sources such as rainwater or treated greywater can be used. These can be achieved by installing rainwater harvesting systems or greywater treatment systems. Another option is to use surface water sources like rivers, lakes, or streams instead of groundwater.
The policymakers can also obtain important insights from this study’s findings. For instance, the findings suggest implementing a robust compliance program helps the industry to operate efficiently within the legal bounds and reduces the likelihood of regulatory violations. Besides, regular internal audits and self-inspections can help identify potential issues and provide timely corrective action. Policymakers can use these insights to formulate long-term strategic plans to promote sustainability in various manufacturing industries.
5.3 Implications of achieving SDGs
This study can help the decision-makers of the relevant sector to contribute to attaining several specific SDGs. For instance, through sustainable practices in boiler operation, air pollution caused by the boiler can be reduced, leading to improved air quality and, subsequently, better health outcomes for individuals living in the area, which is closely related to SDG-3 (good health and well-being). Additionally, regular maintenance, training of personnel, and adherence to proper operating procedures can help reduce the risk of accidents and promote a safer working environment. Furthermore, sustainable practices in boiler operation can also contribute to SDG-3 by reducing the strain on healthcare systems and improving overall health and well-being.
Through sustainable practices, water contamination risk from boiler operation can be reduced by implementing proper treatment and discharge systems. Hence, sustainable boiler operations can conserve water resources by introducing treatment facilities and reducing water consumption, which can contribute to SDG-6 (safe and clean water).
The boiler’s energy efficiency can be increased by implementing sustainable practices in boiler operation, such as using cleaner fuels, implementing energy-efficient technologies, and regular maintenance. These can lead to reduced energy consumption, lower energy costs, and decreased greenhouse gas emissions. Furthermore, sustainable boiler operation can help promote renewable energy sources, such as solar or geothermal energy, which reduces the dependence on fossil fuels and the associated environmental impacts. All these can contribute to SDG-7 (affordable, sustainable and clean energy) and SDG-12 (sustainable management and efficient use of natural resources).
Promoting sustainable practices in boiler operation can encourage innovation in sustainable boiler technology and infrastructure. Investing in sustainable boiler operations can provide jobs and economic growth, which is essential for developing industries, and promoting innovations. All these can contribute to SDG-9 (industry, innovation, and infrastructure).
Furthermore, sustainable boiler operations can help to reduce GHG emissions and promote the use of renewable energy sources and carbon capture and storage technologies, which can help to reduce the amount of carbon dioxide in the atmosphere and thus mitigate the effects of climate change. These can contribute to SDG-13 (reduce the impacts of change).
6 Conclusions
Boiler operations are essential in the apparel manufacturing process. As a substantial part of apparel manufacturing and a significant consumer of natural resources, the sustainability of boiler operations must be ensured to attain various important SDGs. Workplace safety in the apparel industry is also highly dependent on sustainable boiler operations. Several barriers existing in the apparel industries of emerging economies create hindrances to attaining sustainable operations of boilers. This research is one of the first attempts in the literature to evaluate the barriers to sustainable boiler operation in an emerging economy like Bangladesh, a major global apparel manufacturer. A fuzzy DEMATEL-based framework was utilized in this study to reduce the vagueness and uncertainty of the human decision-making process. This study’s findings suggest that the ’Absence of water treatment facilities (B5)’, ’Fossil fuel burning and GHG emissions (B3)’, ’Excessive consumption of groundwater (B9)’, ’Inadequate compliance with safety and hazard regulations (B11),’, and ’Not recycling blowdown water (B8) as the top 5 most significant barriers. An interesting observation from this study is that ’Inadequate compliance with safety and hazard regulations (B11)’ and ’Lack of periodic inspection and preventive maintenance (B6)’ are the top 2 most important causal barriers, which indicates visibilities are not always the best indicator of influencing capability of a barrier. Managers and policymakers should utilize this insight to make more far-sighted and proactive strategies in the future.
Like all studies, this study also has some limitations that need to be addressed in future research. Although fuzzy DEMATEL is a highly effective tool for decision-making problems, it can be very complex with increasing the number of variables. This study dealt with 13 variables. Therefore each expert needed to respond to (13×12 = 156) semi-structured questions to form the direct-relation matrix, which is difficult for a human decision-maker. Other more flexible decision-making methods can be considered in future research attempts. In the future, researchers can also consider involving artificial intelligence and machine learning techniques to maintain decision-making consistency, which can make the study more robust. Future researchers can also consider other industrial operations to be analyzed using this framework to promote sustainability.
Acknowledgments
The authors would like to thank the experts who took their valuable time to provide feedback for this study. The authors are also grateful to the RMG Sustainability Council, Bangladesh, for their assistance during the data collection phase of this research.
References
- 1. Rahman MA, Karmaker CL, Ahmed T, Khan MI, Morshed AM, Ali SM. Modelling the causes of boiler accidents: implications for economic and social sustainability at the workplace. Heliyon. 2022 Jun 7:e09601. pmid:35711984
- 2. Saha S, Sayem NA, Khan MM, Biswas PK. Overall performance of steam system used in garment industries in Bangladesh: a case study–based approach. Energy Efficiency. 2021 Feb;14:1–8.
- 3. Stanytsina V, Artemchuk V, Bogoslavska O, Zaporozhets A, Kalinichenko A, Stebila J, et al. Fossil Fuel and Biofuel Boilers in Ukraine: Trends of Changes in Levelized Cost of Heat. Energies. 2022 Sep 30;15(19):7215.
- 4. Bose A, Saini DK. Biomass Fired Thermal Power Generation Technology-A Route to Meet Growing Energy Demand and Sustainable Development. Nature Environment and Pollution Technology. 2022 Sep 1;21(3):1307–15.
- 5. Korosteleva J. The Implications of Russia’s Invasion of Ukraine for the EU Energy Market and Businesses. British Journal of Management. 2022 Oct;33(4):1678–82.
- 6. Hussain S, Xuetong W, Maqbool R. Understanding the power disruption and its impact on community development: An empirical case of Pakistan. Sustainable Energy Technologies and Assessments. 2023 Feb 1;55:102922.
- 7. Kanwal S, Mehran MT, Hassan M, Anwar M, Naqvi SR, Khoja AH. An integrated future approach for the energy security of Pakistan: Replacement of fossil fuels with syngas for better environment and socio-economic development. Renewable and Sustainable Energy Reviews. 2022 Mar 1;156:111978.
- 8. Xu Y, Liu A, Li Z, Li J, Xiong J, Fan P. Review of Green Supply-Chain Management Diffusion in the Context of Energy Transformation. Energies. 2023 Jan;16(2):686.
- 9. Mamun AA, Bormon KK, Rasu MN, Talukder A, Freeman C, Burch R, et al. An Assessment of Energy and Groundwater Consumption of Textile Dyeing Mills in Bangladesh and Minimization of Environmental Impacts via Long-Term Key Performance Indicators (KPI) Baseline. Textiles. 2022 Sep 28;2(4):511–23.
- 10. Siraj MT, Bari AM, Shahriar MH, Al Islam MF. Prioritization of the Electrical Risk Factors in the Ready-Made Garment Industries of Bangladesh: A Hybrid MCDM Approach.
- 11. Farhana K, Sneha ZZ, Mondol S, Farin F, Mahamude AS. Business Trend Analysis of RMG Industry in Context of Bangladesh-A Case Study. International Journal of Industrial Management. 2022 Jul 31;14(1):515–28.
- 12.
Buzzuto C. Chapter 2—Boiler Operator’s Handbook. CRC Press; 2021 Dec 28: pp.47–96.
- 13. Ranaraja CD, Devasurendra JW, Maduwantha MI, Madhuwantha GA, Hansa RY. Optimization of an industrial boiler operation. Jf Res. Technol. Eng. 2020;1:126–34.
- 14. Behzad M, Kim H, Behzad M, Behambari HA. Improving sustainability performance of heating facilities in a central boiler room by condition-based maintenance. Journal of Cleaner Production. 2019 Jan 1;206:713–23.
- 15. Patil SS, Bewoor AK, Kumar R, Ahmadi MH, Sharifpur M, PraveenKumar S. Development of Optimized Maintenance Program for a Steam Boiler System Using Reliability-Centered Maintenance Approach. Sustainability. 2022 Aug 15;14(16):10073.
- 16. Kundakcı N. An integrated method using MACBETH and EDAS methods for evaluating steam boiler alternatives. Journal of Multi‐Criteria Decision Analysis. 2019 Jan;26(1–2):27–34.
- 17. Li C, Gillum C, Toupin K, Park YH, Donaldson B. Environmental performance assessment of utility boiler energy conversion systems. Energy conversion and management. 2016 Jul 15;120:135–43.
- 18. Paul AR, Alam F. Compliance of boiler standards and industrial safety in Indian subcontinent. International Journal of Engineering Materials and Manufacture. 2018 Dec 1;3(4):182–9.
- 19. Ali MS, Habibullah H. A review on the current status of boiler inspection and safety issues in Bangladesh. Energy Procedia. 2019 Feb 1;160:614–20.
- 20. Paul AR, Alam F, Jain A, Ali MS. Boiler Safety in South Asia. Journal of The Institution of Engineers (India): Series C. 2020 Oct;101:761–9.
- 21. Barma MC, Saidur R, Rahman SM, Allouhi A, Akash BA, Sait SM. A review on boilers energy use, energy savings, and emissions reductions. Renewable and Sustainable Energy Reviews. 2017 Nov 1;79:970–83.
- 22.
Bukowska M, Nowak K, Proszak-Miąsik D, Rabczak S. Concept of heat recovery from exhaust gases. In IOP Conference Series: Materials Science and Engineering 2017 Oct 1 (Vol. 245, No. 5, p. 052057). IOP Publishing.
- 23. Charde MS, Bhoyar MS, Bisen H. Case study on efficiency of boiler and factors affecting it. International Journal on Research & Modern Trends in Engineering & Management (IJRMTEM). 2017;2(1):1–8.
- 24. Naqvi SA, Arshad M, Farooq A, Nadeem F. Implementation of Sustainable Practices in Textile Processing Mills of Lahore, Pakistan. Polish Journal of Environmental Studies. 2020 Jan 1;29(1).
- 25. Fialko NM, Navrodska RO, Shevchuk SI, Stepanova AI. Improvement of environmental conditions by applying heat recovery technologies of boiler plants. Natsional’nyi Hirnychyi Universytet. Naukovyi Visnyk. 2021 Nov 1(6):148–52.
- 26. Shao J, Taisch M, Ortega-Mier M. A grey-DEcision-MAking Trial and Evaluation Laboratory (DEMATEL) analysis on the barriers between environmentally friendly products and consumers: practitioners’ viewpoints on the European automobile industry. Journal of Cleaner Production. 2016 Jan 20;112:3185–94.
- 27. Bari AM, Siraj MT, Paul SK, Khan SA. A Hybrid Multi-Criteria Decision-Making approach for analysing operational hazards in heavy fuel oil-based power plants. Decision Analytics Journal. 2022 Jun 1;3:100069.
- 28. Karmaker CL, Al Aziz R, Palit T, Bari AM. Analyzing supply chain risk factors in the small and medium enterprises under fuzzy environment: Implications towards sustainability for emerging economies. Sustainable Technology and Entrepreneurship. 2023 Jan 1;2(1):100032.
- 29. Abdullah FM, Al-Ahmari AM, Anwar S. Exploring Key Decisive Factors in Manufacturing Strategies in the Adoption of Industry 4.0 by Using the Fuzzy DEMATEL Method. Processes. 2022 May 16;10(5):987.
- 30. Li J, Wu CH, Chen CW, Huang YF, Lin CT. Apply fuzzy DEMATEL to explore the decisive factors of the auto lighting aftermarket industry in Taiwan. Mathematics. 2020 Jul 19;8(7):1187.
- 31. Yadav H, Soni U, Kumar G. Analysing challenges to smart waste management for a sustainable circular economy in developing countries: a fuzzy DEMATEL study. Smart and Sustainable Built Environment. 2023 Feb 20;12(2):361–84.
- 32. Singh S, Dasgupta MS, Routroy S. Analysis of critical success factors to design e-waste collection policy in India: A fuzzy DEMATEL approach. Environmental Science and Pollution Research. 2022 Feb;29(7):10585–604. pmid:34523104
- 33. Saroha M, Garg D, Luthra S. Identification and analysis of circular supply chain management practices for sustainability: a fuzzy-DEMATEL approach. International Journal of Productivity and Performance Management. 2022 Feb 15;71(3):722–47.
- 34. Liu Y, Wood LC, Venkatesh VG, Zhang A, Farooque M. Barriers to sustainable food consumption and production in China: A fuzzy DEMATEL analysis from a circular economy perspective. Sustainable Production and Consumption. 2021 Oct 1;28:1114–29.
- 35. Sardana D, Gupta N, Kumar V, Terziovski M. CSR ‘sustainability’practices and firm performance in an emerging economy. Journal of Cleaner Production. 2020 Jun 10;258:120766.
- 36. Akter S, Debnath B, Bari AM. A grey decision-making trial and evaluation laboratory approach for evaluating the disruption risk factors in the Emergency Life-Saving Drugs supply chains. Healthcare Analytics. 2022 Nov 1;2:100120.
- 37.
Energy. Retrieved October 23, 2022, https://www.tbsnews.net/bangladesh/energy/using-energy-efficient-tech-rmg-sector-stressed-249346. The Business Standard. 2021 May 22.
- 38.
SREDA. Retrieved October 23, 2022, http://www.sreda.gov.bd/site/page/b134417f-2c69-431d-ab18-98d247e39c86/-. Power Division, Ministry of Power, Energy and Mineral Resources. 2022.
- 39.
ACCORD. Retrieved October 30, 2022, https://bangladeshaccord.org/updates/2019/03/18/boiler-safety-pilot-program-results. 2019.
- 40. Hasan MM, Mahmud A, Islam MS. Deadly incidents in Bangladeshi apparel industry and illustrating the causes and effects of these incidents. Journal of Finance and Accounting. 2017;5(5):193–9.
- 41.
Hossan MZ, Islam S, Khan MF, Shammi S, Amin MA. Boiler explosion in Bangladesh: Causes, consequences and precautions. In Proceedings of the 2019 International Conference on Management Science and Industrial Engineering 2019 May 24 (pp. 297–301).
- 42. Hasan AM, Rokonuzzaman M, Tuhin RA, Salimullah SM, Ullah M, Sakib TH, Thollander P. Drivers and barriers to industrial energy efficiency in textile industries of Bangladesh. Energies. 2019 May 10;12(9):1775.
- 43. Anam MZ, Bari AM, Paul SK, Ali SM, Kabir G. Modelling the drivers of solar energy development in an emerging economy: Implications for sustainable development goals. Resources, Conservation & Recycling Advances. 2022 May 1;13:200068.
- 44. Roushan M. Study on the use of fabric wastes as an energy source for boiler by incineration process. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 2021 Jan 1:1–2.
- 45. Haque MS, Nahar N, Sayem SM. Industrial water management and sustainability: development of SIWP tool for textile industries of Bangladesh. Water Resources and Industry. 2021 Jun 1;25:100145.
- 46. Tushar ZN, Bari AM, Khan MA. Circular supplier selection in the construction industry: A sustainability perspective for the emerging economies. Sustainable Manufacturing and Service Economics. 2022 Apr 1;1:100005.
- 47. Debnath B, Shakur MS, Bari AM, Karmaker CL. A Bayesian Best–Worst approach for assessing the critical success factors in sustainable lean manufacturing. Decision Analytics Journal. 2023 Mar 1;6:100157.
- 48. Palit T, Bari AM, Karmaker CL. An integrated Principal Component Analysis and Interpretive Structural Modeling approach for electric vehicle adoption decisions in sustainable transportation systems. Decision Analytics Journal. 2022 Sep 1;4:100119.
- 49. Tushar SR, Alam MF, Bari AM, Karmaker CL. Assessing the challenges to medical waste management during the COVID-19 pandemic: Implications for the environmental sustainability in the emerging economies. Socio-Economic Planning Sciences. 2023 Jan 18:101513. pmid:36687378
- 50. Rahman MM, Bari AM, Ali SM, Taghipour A. Sustainable supplier selection in the textile dyeing industry: An integrated multi-criteria decision analytics approach. Resources, Conservation & Recycling Advances. 2022 Nov 1;15:200117.
- 51. Debnath B, Bari AM, Haq MM, de Jesus Pacheco DA, Khan MA. An integrated stepwise weight assessment ratio analysis and weighted aggregated sum product assessment framework for sustainable supplier selection in the healthcare supply chains. Supply Chain Analytics. 2023 Mar 1;1:100001.
- 52. Alazemi AS, Ali MY, Daud MR. Preventive maintenance of boiler: A case of Kuwait industry. International Journal of Engineering Materials and Manufacture. 2019 Jun 15;4(2):48–58.
- 53. Soto Lopez D, Garshasbi M, Kabir G, Bari AM, Ali SM. Evaluating interaction between internal hospital supply chain performance indicators: a rough-DEMATEL-based approach. International Journal of Productivity and Performance Management. 2022 Jun 24;71(6):2087–113.
- 54. Ullah F, Sepasgozar SM, Thaheem MJ, Wang CC, Imran M. It’s all about perceptions: A DEMATEL approach to exploring user perceptions of real estate online platforms. Ain Shams Engineering Journal. 2021 Dec 1;12(4):4297–317.
- 55. Si SL, You XY, Liu HC, Zhang P. DEMATEL technique: A systematic review of the state-of-the-art literature on methodologies and applications. Mathematical Problems in Engineering. 2018;2018:1–33.
- 56. Pramanik PK, Biswas S, Pal S, Marinković D, Choudhury P. A comparative analysis of multi-criteria decision-making methods for resource selection in mobile crowd computing. Symmetry. 2021 Sep 16;13(9):1713.
- 57. Pamučar DS, Božanić D, Ranđelović A. Multi-criteria decision making: An example of sensitivity analysis. Serbian journal of management. 2017;12(1):1–27.
- 58. Mukhametzyanov I, Pamucar D. A sensitivity analysis in MCDM problems: A statistical approach. Decision making: applications in management and engineering. 2018 Oct 15;1(2):51–80.
- 59. Dolinsky AA, Obodovych OM, Sydorenko VV, Lymar AY. FEATURES OF WATER TREATMENT FOR BOILER ROOMS. Thermophysics and Thermal Power Engineering. 2021 Dec 20;43(4):17–24.
- 60. Meese AF, Kim DJ, Wu X, Le L, Napier C, Hernandez MT, et al. Opportunities and Challenges for Industrial Water Treatment and Reuse. ACS ES&T Engineering. 2021 Oct 8;2(3):465–88.
- 61. Lv T, Wang L, Xie H, Zhang X, Zhang Y. Evolutionary overview of water resource management (1990–2019) based on a bibliometric analysis in Web of Science. Ecological informatics. 2021 Mar 1;61:101218.
- 62.
United Nations. Retrieved November 3, 2022, https://www.ohchr.org/en/press-releases/2022/03/world-must-end-overexploitation-groundwater-says-un-expert. World must end overexploitation of groundwater, says UN expert. OHCHR. 2022, March 18.
- 63. Landi RG, Montedo UB, Lahoz CH. Using systems theory for additional risk detection in boiler explosions in Brazil. Safety science. 2022 Aug 1;152:105761.
- 64. Economidou M, Todeschi V, Bertoldi P, D’Agostino D, Zangheri P, Castellazzi L. Review of 50 years of EU energy efficiency policies for buildings. Energy and Buildings. 2020 Oct 15;225:110322.
- 65.
Ozawa M, Urata M, Honda M. Boiler explosion and inspection. In Advances in Power Boilers 2021 Jan 1 (pp. 427–460). Elsevier.
- 66. Harrell G. Boiler blowdown energy recovery. Energy engineering. 2004 Sep 1;101(5):32–42.
- 67. Kocabaş C, Savaş AF. Reducing Energy Losses of Steam Boilers Caused by Blowdown with Using the FMEA Method. Smart Science. 2021 Apr 3;9(2):70–9.
- 68.
Sa’ad SF, Shiun L, Manan Z, Alwi SW. Industrial wastewater recovery for integrated water reuse management. In Integrated and Hybrid Process Technology for Water and Wastewater Treatment 2021 Jan 1 (pp. 293–311). Elsevier.
- 69.
Heselton PE, editor. Boiler operator’s handbook. CRC Press; 2020 Nov 26.
- 70. Puskar JR. Reducing boiler operating staff? It might be legal but think through the risks!. Process Safety Progress. 2022 Dec;41(4):658–64.
- 71. Patil SS, Bewoor AK. Reliability analysis of a steam boiler system by expert judgment method and best-fit failure model method: a new approach. International Journal of Quality & Reliability Management. 2021 Jan 21;38(1):389–409.
- 72. Elahi S, Hosen MD, Nizam ME, Ali SB, Shifat RI. Comparative analysis in RMG industries before and after Rana Plaza incident in Bangladesh. J Textile Eng Fashion Technol. 2019 Jul;5(4):202–11.
- 73. Islam MR. Economic Growth Rates and Exports of Bangladesh: The Bengal Tiger?. South Asia Research. 2019 Nov;39(3):285–303.
- 74. McGowan MK. How Can Designers Increase Boiler Energy Efficiency?. ASHRAE Journal. 2021 Jan 1;63(1):56–9.
- 75. Men Y, Liu X, Zhang T. A review of boiler waste heat recovery technologies in the medium-low temperature range. Energy. 2021 Dec 15;237:121560.
- 76. Li M, Wang D, Shan H. Risk assessment of mine ignition sources using fuzzy Bayesian network. Process Safety and Environmental Protection. 2019 May 1;125:297–306.