https://orcid.org/0000-0003-4191-2543
Figures
Abstract
Aim
Bone quality is evaluated using bone density for qualitative classification, a characteristic that may be delicate to evaluate. Contemporary implantology that relies on modern measurement techniques, needs a more quantitative estimate of the bone quality.
Materials and methods
PubMed and EMBASE databases were searched with no time restriction. Clinical and radiographic studies reporting on alveolar ridge dimensions and its parameters in different areas of the dentate and edentulous jaws were included. A meta-analysis was performed using random effect models to report a combined mean for alveolar ridge and its parameters. Meta regression statistical tests were performed in order to identify differences in those outcome parameters.
Results
30 studies were included. The majority of the selected studies (total of 27) used live human subjects and CBCT to analyze alveolar ridge dimensions and its parameters. Using the combined mean obtained from the meta-analysis, a typical portrait of the alveolar ridge was constructed, and a geometrically based quantitative bone classification proposed. The quantitative classification was found to match the existing qualitative classification.
Citation: Shemtov-Yona K (2021) Quantitative assessment of the jawbone quality classification: A meta-analysis study. PLoS ONE 16(6): e0253283. https://doi.org/10.1371/journal.pone.0253283
Editor: Dengshun Miao, Nanjing Medical University, CHINA
Received: January 13, 2021; Accepted: June 2, 2021; Published: June 16, 2021
Copyright: © 2021 Keren Shemtov-Yona. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper and its Supporting Information files.
Funding: The author received no specific funding for this work.
Competing interests: The authors have declared that no competing interests exist.
1. Introduction
Dental implants are the most popular and predictable modern solution for missing teeth. The early and long-term success of dental implants depends largely on the alveolar bone quantity and quality during implant placement [1, 2]. Poor bone quality and quantity are considered as a risk factor for biological complications of the implant, associated with lack of primary stability and impaired healing / osseointegration, that can lead to early implant loss [2].
The external architecture of the dentate or edentulous alveolar bone and its volume are primarily evaluated during treatment planning for dental implants. The external and internal architecture of bone controls virtually every facet of the practice of implant dentistry from implant design selection, surgical approach, healing time, type of future prosthetic reconstruction etc.
Lekholm and Zarb [3] listed four types of bone quality found in the anterior regions of the jawbone. This classification, widely used in modern implant dentistry, is essentially qualitative and defines bone quality based on the relationship between the compact cortical and the trabecular bones, as follows.
Quality 1 is for homogeneous compact bone, and Quality 2 describes a thick layer of compact bone surrounding a core of dense trabecular bone. Quality 3 refers to a thin layer of cortical bone surrounding dense trabecular bone, and Quality 4 corresponds to a thin layer of cortical bone surrounding a core of low-density trabecular bone.
A correlation between bone quality and implant failure was found in a recent systematic review [4], according to which the survival percentage of surface treated implants inserted to Quality 1 was 97.6%, Quality 2, 96.2%; Quality 3, 96.5%; and a reduction in implant’s survival rate in Quality 4 bone of 88.8% the mean follow-up was 53.7 months. This result clearly emphasizes the importance of bone quality (and quantity) for implant survival, and the correlation to the Lekholm and Zarb’s [3] classification.
In 1988, Misch proposed four (D1-D4) bone type groups based on macroscopic cortical and trabecular bone characteristics (density) located in edentulous areas of the maxilla and mandible (see Resnik and Misch [5]). This work indicated that different bone types may often be encountered in different regions of the mouth. D1 bone type is considered rare, and mostly found in the anterior mandible. D2 bone type is the most common bone type, and it can be found in most areas of the mandible while D3 bone type is frequent in the anterior maxilla. Finally, D4 bone type is most often identified in the posterior maxilla.
These qualitative classifications can be further extended, and to some extent quantified, by considering the ratio between cortical to cancellous bone volume, as assessed in a routine CT scan. In that spirit, Chatvaratthana et al. [6] reported that a ratio in excess of 0.75 (75–100% cortical bone) corresponds to D1 bone type, 0.5–0.75 (50–75% cortical bone) to D2 bone type, 0.25–0.5 (25–50% cortical bone) to D3 bone type and D4 bone type contains less than 0.25 (0–25% cortical bone). This classification does not take into consideration the total bone volume and does not differentiate between the different areas of the maxilla and the mandible.
Despite the wide use of the above-mentioned bone classifications, be it pre-operative or operative, they are all essentially subjective, a point raised by Brunski in [7], and rely mostly on bone density or to the surgeon’s perception during drilling the implant osteotomy [5, 8]. In addition, the classification lacks the clear quantitative information on the relative contribution of each component of the ridge, the cortical bone component (buccal plate/lingual plate/palatal plate) and the trabecular bone component on the anatomy of the ridge and thus the bone type group. Furthermore, geometrical variations are objective, straightforward and easier to measure whereas density maps are much more delicate to interpret, and prone to bias due to method variations, all the more so if only subtle local evolutions are to be determined.
The alveolar process is defined as part of the maxilla and mandible that forms around and supports the teeth. Its volume, shape and height are determined by the shape of the teeth (crown and root) they harbor [9]. The bony component of the alveolar process is comprised of outer plates, the facial (labial and buccal) surface and the lingual/palatal surface, these plates being made of thin cortical bone. The roots are covered by the attachment apparatus which includes the root cementum, periodontal ligament, and the alveolar bone proper (bundle bone) that is made of cortical bone as well. The area enclosed by the cortical bone plates is occupied by cancellous (spongy) bone [10, 11]. The cortical surfaces are in continuity with the body of the jaw and vary in thickness from one region of the jaw to the other.
Both in the mandible and in the maxilla, the facial plate is usually thin and tends to be thicker in the second and third molar area. The palatal/lingual plates of the alveolar process are usually thicker than the facial plate. Despite the basic similarity between the two jaws, the alveolar process in the mandible it is not as cancellous as that in the maxilla. The thin facial bone plate, most often seen in the anterior area of the mandible, its composed of mainly cortical dense compact bone as seen on the lingual plate [11, 12].
When teeth are lost, the portion of the alveolar process that supported the missing tooth will be subject to atrophic reduction, where the size of the ridge will become markedly reduced in both its horizontal and vertical dimensions [13, 14]. The percentage of vertical change was reported to be 11–22% at 6 months, while the percentage of horizontal change was reported to be 32% after 3 months, and 29–63% between 6 and 7 months [15, 16]. The horizontal resorption of the buccal component of the ridge was shown to reach as much as 56%, while lingual component reduction was reported to be much less, up to 30% [17]. In addition, the absolute amounts of tissue loss varied from one group of teeth to the next [15] and on the area of the jaw non-molar vs. molar areas [18].
The buccal bone plate’s original dimensions have a large effect on the degree of ridge resorption following tooth extraction. It was reported that bone plates that were less than 1 mm wide lost substantially more dimension (width and height) than wider plates, along with a more pronounced horizontal dimension loss [18–21]. This clear difference in post-extraction remodeling behavior relies on the histological characteristics of the bone plate, as the thin facial plate is predominantly composed of bundle bone that is functionally dependent on tooth presence and will thus completely resorb following tooth extraction or loss. This resorption will result in pronounced vertical reduction of the ridge height. For the wider lingual crest and more apical parts of the buccal plate, where the bone composition is lamellar, compact in nature and less affected by the bundle bone resorption, less changes are expected [22].
Araujo and Lindhe [23] evaluated dimensional alterations of the alveolar ridge that occurred following premolar tooth extraction in a dog model, by measuring the width of the facial and lingual plates 1mm, 3mm and 5 mm, from the crestal part, during 8 weeks after healing. The study showed that the facial plate width was reduced by up to 20% and the lingual plate narrowed by up to 15% in all examined bone levels.
Katranji et al. [24] performed a quantitative human cadaver head study to evaluate the differences in ridge anatomy in dentate and edentulous ridges. The facial and lingual / palatal plate thickness was evaluated. Differences in cortical bone width were observed in different areas of the jaw (e.g., anteriors, premolars, or molars), as well as between the different jaws (e.g., maxilla or mandible) and between dentate and edentulous jaws.
Two kinds of assessment methods exist for the bone quality and quantity. The direct measurement techniques include ex vivo studies (i.e., dry skulls or cadaver) or sample / biopsy retrieved for analysis from animals or human subjects, and in vivo studies done on live subjects. The indirect measurement techniques are based on radiographic imaging, such as CT or CBCT. These measurement techniques provide a three-dimensional depiction of bony structures and are considered to be an accurate diagnostic tool that, in addition to linear measurements, enables evaluation of the morphology, bone quality, and volume of the residual alveolar ridge. [25].
The present study aims firstly at defining and evaluating the thickness of the alveolar ridge, palatal/lingual and buccal cortical bone in various regions of the maxilla and mandible, dentate and edentulous, while trying to systematically identify the different commonly accepted bone types, based on quantitative geometric data published in the literature and gathered according to the PRIAMA guidelines. In addition, the study singles out the parameters of the alveolar ridge in both dentate and in edentulous states, that most influence the different bone types in different areas of the jaws using meta-analysis and meta regression statistical tests.
2. Materials and methods
In order to evaluate and identify the different alveolar ridge parameters, the study collected and analyzed data from the literature, using recommended tools and analysis methods for systematic reviews and meta-analyses [26, 27].
2.1 Patient, Exposure, Comparison, Outcome (PECO) questions
This study was performed using a PECO (Patient or Population, Exposure/Intervention, Control or Comparison, Outcome and Study design) framework. The population was defined as human patients (alive or cadaver), that were part of a study related to dental implants or orthodontic implant placement or anatomical studies. The exposure was anatomical factors including the impact of area (anterior, premolar, posterior), jaw (maxilla and mandible) and state (dentate and edentulous on outcomes associated with linear measurements of the alveolar ridge and its components / dimensions. The dimensions, measured in millimeters, were set as the outcome. In the eventuality of a comparative study between two or more groups, those groups were considered as outcomes irrespective of the conclusions of the study. A comparison was performed between the different anatomical parameters of the alveolar ridge in order construct different bone types based on geometrical factors and to evaluate their respective contribution to the classification.
2.2 Search strategies
An electronic search without any time restrictions was undertaken initially in the National Library of Medicine database (Medline) through its online site (PubMed), followed by searches in the EMBASE database.
The main terms used during the search are related to the study aim as “Edentulous” and/or “Dentate”, “Cortical (bone or wall), “Buccal” (or”Facial”) and/or “Palatal” and/or “Lingual” dimensions (or width or thickness) or alterations (or morphology), “Alveolar ridge” (or process) dimensions (or width/thickness) “Anterior” and/or “Premolar” and/or “Posterior” Maxilla/Mandible, “CBCT” and/or “CT” and/or “cadaver”. Additional Text terms as well as MeSH keywords and Emtree keywords specific for the study question are listed in the appendix section (S1 Table).
The date of the latest literature search was done in August 2020.
2.3 Study selection
2.3.1 Inclusion/exclusion criteria.
Eligibility criteria were as follows:
- Studies performing linear measurements for quantitative assessment (e.g., height, width) of the alveolar bone at dentate or edentulous sites or measuring distances from anatomical structures related to anatomical studies/orthodontics /implant dentistry/maxillofacial surgery/periodontology.
- Studies giving information on the study population (number of participants/sex/age) and addressing both adults and children over 13.
- Clinical studies using radiographic tools as CT/CBCT (type of sections), in-vivo clinical studies with a sample size greater than 5, in-vitro studies using human cadavers or dry skulls measuring linear distances in alveolar bone.
- Measurement’s data: Alveolar ridge width (RW), buccal cortical bone width (BW), and palatal/lingual bone width (PW/LW), all reported in millimeters. The included studies had to provide full information on which jaw the measurements were taken, which part of the jaw (anterior, premolar, or posterior) or tooth/site position in the jaw. In addition, the study had to include the exact location of the measurements from the top of the alveolar crest (in millimeters).
- Statistical data: Included only studies that used parametric statistical tests with normal distribution of the study population. The given results must be the mean, standard deviation and number of patients included in the study group.
The exclusion criteria were defined as:
- Experimental (animal) studies.
- Review articles.
- Studies of populations restricted to specific diseases or conditions.
- Intervention studies with case selection, or studies performing measurements prior to and/or post treatment, that might affect the alveolar bone dimensions (e.g. horizontal /vertical GBR, socket preservation, split-ridge bone augmentation or any type of surgical intervention aimed at changing bone ridge dimensions or components).
2.3.2 Study selection process.
Two independent observers analyzed the titles and abstracts of all identified reports. (K.S.Y and D.R) For the studies that appeared to meet the inclusion criteria, or for which there were insufficient data in the titles and the respective abstracts to make a clear decision, the full texts of the articles were retrieved for further analysis. The final inclusion of the relevant full-text articles for evaluation was decided by consensus between the same two observers. (K.S.Y and D.R)
2.4 Data extraction process
A “selected studies table” (S2 Table) was constructed that included only the studies from which measurements could be extracted. This table included the following: author(s) name, title, year of publication, study aim, study population data (no. of patients, sex, age), study measurement tools (CBCT, in-vitro, in-vivo etc.), site characteristics (dentate/edentulous, jaw), site location (anterior/premolar/posterior or tooth position (incisor/premolar/molar)), site measurement (ridge width/ buccal width/palatal or lingual width), distance from alveolar ridge crest, statistical data provided as well as main findings.
From the selected studies, linear measurements data tables were constructed. Each of the 6 tables corresponds to a different area of the jaw (anterior maxilla, premolar maxilla, posterior maxilla, anterior mandible, premolar mandible, posterior mandible). Each table was subdivided into separate tables which correspond to the measured parameter (ridge width / buccal width / palatal or lingual width), reaching a total of 18 tables. Each table was divided again into final data tables according to site characteristics (dentate and edentulous). Each table contains the name of the study included, and the measurement obtained from the study (mean+standard deviation, number of measurements included) and the distance from the alveolar crest where the measurement was done. The table elaboration process is shown schematically in Fig 1.
2.5 Quality assessment
The assessment of study quality was performed for all the included articles based on the JBI checklist [28]. Because no randomized control trials (RCT) were included, we based our checklist on the recommendations applying to ‘Quasi Experimental Study”, with adequate modifications to fit exactly into the context of the present research (see S1 File). The available answers were “yes”, “no”, “unclear”. The risk of bias was assessed independently by the two above-mentioned examiners.
2.6 Data analysis
The quantitative construction of the alveolar ridge from the obtained data was done by analyzing the combined mean of each component of the alveolar ridge for every millimeter from the crest. In order to find the combined mean with the 95% confidence interval from all studies included in the analysis, we used meta-analysis (when at least two studies with relevant data per outcome were available). In all the analyses done, we used the random effects model. We assessed statistical heterogeneity using I2 and Q statistics Meta-analyses were performed separately for every combination of size, width, position and dentate/edentulous.
In addition, further meta regression statistical tests were performed to identify differences in outcome parameters for each millimeter from the crest, and differences between the different components of the alveolar ridge. Post-hoc tests were performed when comparison was done between more than two outcome parameters.
3. Results
3.1 Study selection
A total of 7104 studies were identified through the electronic search.1011 records dealt with dentate alveolar ridges and 6093 on edentulous. After removing duplicates, a thorough screening of bibliographies of the relevant included/excluded articles yielded a total of 4739 citations (Fig 2).
Upon exclusion of 4601 publications based on their titles/abstract, 138 studies remained for full-text evaluation. Finally, based on full text assessment, an additional 108 studies were excluded yielding 30 studies with quantitative data, of which 19 provided data on dentate alveolar ridge and 15 on edentulous alveolar ridge, noting that 4 reported data on both dentate and edentulous, (Fig 2).
3.2 Study characteristics
The characteristics of the 30 included studies are listed in S1 Table. The majority of the selected studies (total of 27) used living human live subjects to analyze alveolar ridge dimensions and its parameters [17, 29–54], 2 studies used cadaver heads [24, 55] and 1 study used dry skulls [56]. The most frequent analysis tool was the CBCT, with measurements extracted using a proprietary software to identify the alveolar ridge parameters and measure their dimensions. The remaining in-vivo/ in-vitro studies measured these parameters using a caliper or a microscope ruler.
Results about the mandible were collected from 18 studies, of which 11 were dentate jaws and 7 were edentulous. Six studies examined the anterior mandible, 14 examined premolar area and 14 posterior area of the mandible. Results about the maxilla were collected from 26 studies, of which 17 were for dentate jaws and 9 for edentulous. Fourteen studies examined the anterior maxilla, 14 examined premolar area and 13 posterior parts of the maxilla.
The measured dimensions outcome, i.e. RW, BW, PW/LW, and CaW (cancellous bone width), were extracted from 21, 16, 7 and 1 studies, respectively.
3.3 Quality assessment
The result of the risk of bias assessment for the included studies is presented in Fig 3. 12 articles were considered as low risk, 4 studies were considered as moderate risk and 14 studies were considered as high risk.
Green indicates low risk, yellow-medium and red-high risk. Grey means undefined.
3.4 Synthesis of results and meta-analysis
The combined mean was calculated along the occlusal-apical direction of the ridge in one-millimeter intervals (dentate and edentulous) both for the total ridge width (RW) and the two cortical walls (BW and LW/PW). The results are presented in Table 1 for the maxilla and in Table 2 for the mandible. The tables present, for each millimeter along the alveolar ridge the number of studies included in the analysis, the calculated combined mean with the 95% confidence interval and the consistency (I2).
We used the calculated combined mean to construct a representative alveolar ridge in the maxilla (Fig 4), and in the mandible (Fig 5). Due to lack of relevant data, only the first 6 mm (vertical dimension) along the alveolar ridge were used for the analysis, in both dentate and edentulous ridges. In addition, data on BW and PW/LW in edentulous ridges are missing in the literature, so that in order to reconstruct the edentulous ridges, we used 75% of the BW combined means of the dentate parameters and 80% of PW/LW according to the earlier mentioned reported bone resorption subsequent to tooth extraction [23].
The fig was constructed by using the combined mean obtained from the meta-analysis results for the RW (Ridge width) marked by a black line. BW (Buccal width) marked by a red line and PW (Palatal width) marked by a blue line and the calculated CaW marked by green line. The interrupted lines represent an estimated width.
The fig was constructed by using the combined mean obtained from the meta-analysis results for the RW- black line, BW—red line and LW—blue line and the calculated CaW marked by green line. The interrupted lines represent an estimated width.
3.5 Assessment of alveolar ridge components and their inter-relations
A comparison between the different millimeters of the same outcome parameter (1mm vs. 2mm vs.3mm vs. 4mm etc.) in the maxilla and mandible revealed that along the 6 mm of the alveolar crest no meaningful differences were observed. The only statistical difference was found between the first 1mm of the alveolar ridge and the following millimeter in BW (95%CI = 0.11–0.4, P<0.01) and PW (95%CI = 0.42–0.73, P<0.01) of the anterior maxilla.
The alveolar ridge width (RW, Tables 1 and 2) in the dentate maxilla shows a steady significant increase, from anterior areas to premolar areas (95%CI = 0.75–2.04, P<0.0001) and posterior areas. (95%CI = 2.35–3.8, P<0.0001). The same behavior was observed in the mandible were RW increased significantly from anterior areas, premolar areas (95%CI = 0.81–2.57, P<0.0001) to posterior areas (95%CI = 1.83–3.45, P<0.0001).
By contrast, the calculated combined mean RW of the edentulous alveolar ridges shows a clear and pronounced reduction, between 17%-57% in the maxilla and between 5–50% in the mandible, with a more noticeable reduction in crestal parts of the ridge that can exceed 50%. No difference was observed in RW reduction between the different areas of the Jaws.
Buccal bone width (BW) in the anterior maxilla was found to be statistically different from BW in premolar area (95%CI = 0.14–0.33, P<0.01), and posterior maxilla (95%CI = 0.27–0.45, P<0.001). No statistical difference was found between the premolar maxilla and posterior maxilla BW (95%CI = 0.02–0.21, P = 0.015). In the mandible, the anterior and the premolar areas shows a comparable outcome (95%CI = (-0.25)-0.43, P = 0.625). But BW at the posterior area was found to be significantly larger than in the anterior (95%CI = 0.53–1.2ת P<0.001) and premolar areas (95%CI = 0.51–1.03 P<0.001).
Palatal cortical bone (PW) in the anterior maxilla was found to be statistically different from PW in the premolar area (95%CI = 0.75–2.05, P<0.001) and the posterior area (95%CI = 3.76–5.19, P<0.001). In addition, PW in the premolar area was found to be statistically different to PW in posterior area (95%CI = 2.35–3.8, P<0.001).
Lingual cortical bone (LW) in the anterior mandible, was found statistically different from LW in premolar area (95%CI = 0.08–0.54, P = 0.0074). No statistical difference was found between LW in anterior area and posterior area (95%CI = (-0.05)-0.38, 0.08–0.54, P = 0.14) and premolar area and posterior area (95%CI = (-0.06)-0.36, P = 0.17)
From a comparison between BW and PW in the maxilla, it seems that BW is narrower than PW. The difference was found to be statistically meaningful in anterior areas (95%CI = 0.47–0.74, P<0.001), premolar area (95%CI = 0.40–0.66,P<0.001) and posterior area (95%CI = 0.12–0.36,P<0.001). In the mandible, BW was narrower than LW in all the evaluated areas. The difference was found to be statistically meaningful in anterior areas (95%CI = 0.8–1.03, P<0.001), premolar area (95%CI = 0.89–1.39, P<0.001), but not in posterior area (95%CI = (-0.14)-0.57, P<0.001).
3.6 Bone classification in dentate and edentulous ridges
Based on the quantitative data (section 3.4 and Tables 1 and 2), different bone types can now be defined in the spirit of Lekholm and Zarb [3]. Using the combined mean width of alveolar ridge (RW) and the relative parts of the cortical components, the bone type can now be defined as:
Bone type 1: The relative part of the cortical bone (Buccal bone + Palatal/Lingual bone) in the total ridge width exceeds 75%.
Bone type 2: The relative part of the cortical bone in the total ridge width lies in the range 50–75%.
Bone type 3: The relative part of the cortical bone in the total ridge width lies in the range 25–50%.
Bone type 4: The relative part of the cortical bone in the total ridge width is inferior to 25%.
Table 3 lists the calculated bone types for the different areas of the maxilla and mandible from the above-described quantitative analysis. The table further describes Misch’s classification for bone types in edentulous ridges according to the different areas of the maxilla and mandible, as well as Chatvaratthana et al’s. [6] quantitative bone classification for comparison.
This analysis shows that the dentate alveolar bone (maxilla and mandible) can be classified as bone type 3 with a relative part of cortical bone between 29.4% to 40.6% in most areas (except for the posterior maxilla where the relative part is 23%). The presence of teeth with the supporting apparatus (PDL, alveolar bone proper) preserves the bone volume and the relative dimensions of the cortical and trabecular bone.
In edentulous ridges, the bone type changes to 2 in the anterior maxilla, anterior mandible and premolar mandible with a relative part of cortical bone of 54.4%, 58% and 50%, respectively. In the premolar maxilla, posterior maxilla and posterior mandible, that are the more posterior areas of the jaws, the bone type remains 3 with a relative part of cortical bone of 40.2%, 34.6% and 45.1%, respectively.
4. Discussion
The present work aims at refining our understanding of the bone type classification that has been essentially qualitative so far. For this purpose, information was first gathered on the alveolar ridge components in different areas of the jaws, in both dentate and edentulous states.
It was found that along the 6 mm of the alveolar crest, there are no meaningful differences in RW, BW and PW/LW. This finding contradicts most published data reporting a consistent increase in the RW [31] BW and PW/LW in the dentate maxilla and the mandible, when moving apically [31, 37, 39, 56, 57]. This happens probably since statistical comparisons were performed between consecutive depths along the ridge and not between intervals/ group of depths.
Regarding the different areas of the jaws, the outcomes of our study show a continuous increase in RW from anterior to posterior areas of both the dentate maxilla and mandible. This finding is in accordance with other studies, both in dentate [46, 58] and in edentulous jaws [35, 40, 50, 54]. A similar trend was shown for BW and PW/LW, as in [31, 49], which clearly outlines and support the importance of defining different areas of the jaws.
Another consistent finding in all included studies, comparing dentate and edentulous RW’s, is the clear reduction in RW after tooth extraction. This reduction was found to be more meaningful in crestal areas of the ridge, where RW reduction exceeds 50% [30, 39, 59]. This finding is in agreement with studies evaluating the effect of buccal cortical bone width on the post extraction horizontal changes [18–21]. In areas of the jaw where buccal bone width was less than 1mm (e.g., the anterior maxilla), the amount of reduction in RW exceeded 50%. On the opposing side, where BW was larger than 1mm (e.g., the posterior maxilla, posterior mandible apical parts of the ridge), the amount of reduction in RW was inferior to 35%.
We propose here a slightly different quantitative classification, in which the denominator is modified to include the total ridge dimension, RW. As shown in Table 3, this modification yields a good correlation and almost full agreement with the qualitative classification of bone type according to specific area of the jaw proposed by Misch. Note that if we interpret the results according to Chatvaratthana et al. [6], although that approach is questioned by [60, 61], all the edentulous cases are of the 1 or 2 bone type. In other words, the edentulous bone becomes essentially cortical, a point that is debatable from a clinical standpoint.
Our study refines the concept by providing a classification that examines each region of the jawbone separately, a point not directly found in Misch [5] or in Leckholm and Zarb’s [3] classification, all viewing the jaws as one and uniform unit.
One of the outcomes of our work lies in the fact that a relatively accessible geometry-based analysis can yield valuable insights on the bone type, of a kind that might be delicate to determine otherwise, e.g., through local density variations over time. In that respect, it is believed that the results presented are original in that they quantitatively complement the well-established qualitative approach while making it more accessible from a routine procedure.
The substantial heterogeneity found during the meta-analysis is a well-known fact in Cochrane and non-Cochrane meta-analyses, either in dentistry or in medicine [62, 63]. Several factors contribute to this high heterogeneity, which are mostly connected to the study population selected in the included studies. Factors, such as possible anatomical difference between males and females [31, 42, 57–59], possible age effects (young vs. aged population), as in [31, 38, 57], or ethnic differences [29], were all found to effect alveolar ridge components, contributing to statistical heterogeneity. Moreover, no information was given in any of the included studies on the healing time following tooth extraction, which is a determinant factor influencing the extent of ridge resorption and the difference between RW in dentate and edentulous state [15, 16].
Finally, it is noted that this study relies on published results rather than direct clinical measurements, where 90% of the included studies used the CBCT to evaluate alveolar ridge parameters. Although the use of live measurement is more accurate, it lacks the advantage of a large study group and involves significant clinical complexity. The key disadvantage is possible accuracy error related to technical issues [25]. With that, the accuracy of one group measurements will be entirely dependent on the accuracy of the measurements, whereas by gathering data from various sources, this risk is somewhat mitigated or averaged.
5. Conclusions
The study identified alveolar bone and its components behavior in dentate and edentulous state.
A continuous increase in RW, BW and PW/LW was observed from anterior to posterior areas of both the dentate maxilla and mandible, which clearly outlines and supports the importance of defining different areas of the jaws.
The study provided a geometry-based bone type classification for each region of the jawbone which was found to be in full agreement with the common qualitative classification.
Supporting information
S1 Table. Search strategy keywords specific for the study question.
https://doi.org/10.1371/journal.pone.0253283.s001
(DOCX)
S2 Table. General characteristics of the included articles.
https://doi.org/10.1371/journal.pone.0253283.s002
(DOCX)
Acknowledgments
Prof. D. Rittel and Dr. V. Shiraz are kindly acknowledged for participating in the data evaluation process (DR) and the statistical data analysis (VS).
References
- 1. Esposito M, Hirsch JM, Lekholm U, Thomsen P. Biological factors contributing to failures of osseointegrated oral implants. (II). Etiopathogenesis. Eur J Oral Sci. 1998;106: 721–764. pmid:9672097
- 2. Chrcanovic BR, Albrektsson T, Wennerberg A. Bone Quality and Quantity and Dental Implant Failure: A Systematic Review and Meta-analysis. Int J Prosthodont. 2017;30: 219–237. pmid:28319206
- 3.
Lekholm U, Zarb GA. patient selection. In: Branemark P-I, Zarb GA, Albrektsson T, editors. Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry. chicago: Quintessence; 1985. pp. 199–209.
- 4. Goiato MC, dos Santos DM, Santiago JFJ, Moreno A, Pellizzer EP. Longevity of dental implants in type IV bone: a systematic review. Int J Oral Maxillofac Surg. 2014;43: 1108–1116. pmid:24679842
- 5.
Resnik RR, Misch CE. Bone Density: A Key Determinant for Treatment Planning. fourth. In: Resnik RR, editor. Misch’s contemporary implant dentistry. fourth. Elsevier Inc.; 2020. pp. 450–466.
- 6. Chatvaratthana K, Thaworanunta S, Seriwatanachai D, Wongsirichat N. Correlation between the thickness of the crestal and buccolingual cortical bone at varying depths and implant stability quotients. PLoS One. 2017;12: e0190293. pmid:29281715
- 7. Misch CE, Qu Z, Bidez MW. Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning and surgical placement. J Oral Maxillofac Surg. 1999;57: 700–706. pmid:10368096
- 8. Norton MR, Gamble C. Bone classification: an objective scale of bone density using the computerized tomography scan. Clin Oral Implants Res. 2001;12: 79–84. pmid:11168274
- 9.
Schroeder HE. The periodontium. In: Oksche A, Vollrath L, editors. Handbook of Microscopic Anatomy. berlin: Springer Berlin Heidelberg; 1986. pp. 233–246.
- 10.
Lang Niklaus P. and Lindhe Jan. Clinical Periodontology and Implant Dentistry. sixth edit. Lang NP, And, Lindhe J, editors. Wiley-Blackwell; 2015.
- 11.
Nelson SJ, Ash MMJ. Dento-osseous structures, Blood vessels and Nerves. ninth edit. Wheeler’s Dental Anatomy, Physiology and Occlusion. ninth edit. Saunders Elsevier; 2010. pp. 239–251.
- 12. Merheb J, Quirynen M, Teughels W. Critical buccal bone dimensions along implants. Periodontol 2000. 2014;66: 97–105. pmid:25123763
- 13. Atwood DA. Some clinical factors related to the rate of resorption of residual ridges. J Prosthet Dent. 1962;12: 441–450.
- 14. Atwood DA. Postextraction changes in the adult mandible as illustrated by microradiographs of midsagittal sections and serial cephalometric roentgenograms. J Prosthet Dent. 1963;13: 810–824.
- 15. Schropp L, Wenzel A, Kostopoulos L, Karring T. Bone healing and soft tissue contour changes following single-tooth extraction: a clinical and radiographic 12-month prospective study. Int J Periodontics Restorative Dent. 2003;23: 313–323. pmid:12956475
- 16. Tan WL, Wong TLT, Wong MCM, Lang NP. A systematic review of post-extractional alveolar hard and soft tissue dimensional changes in humans. Clin Oral Implants Res. 2012;23: 1–21. pmid:22211303
- 17. Botticelli D, Berglundh T, Lindhe J. Hard-tissue alterations following immediate implant placement in extraction sites. J Clin Periodontol. 2004;31: 820–828. pmid:15367183
- 18. Couso‐Queiruga E, Stuhr S, Tattan M, Chambrone L, Avila‐Ortiz G. Post‐extraction Dimensional Changes: A Systematic Review & Meta‐analysis. Journal of Clinical Periodontology. 2020. pmid:33067890
- 19. Spinato S, Galindo-Moreno P, Zaffe D, Bernardello F, Soardi CM. Is socket healing conditioned by buccal plate thickness? A clinical and histologic study 4 months after mineralized human bone allografting. Clin Oral Implants Res. 2014;25: 120–126. pmid:23167308
- 20. Cardaropoli D, Tamagnone L, Roffredo A, Gaveglio L. Relationship between the buccal bone plate thickness and the healing of postextraction sockets with/without ridge preservation. Int J Periodontics Restorative Dent. 2014;34: 211–217. pmid:24600657
- 21. Avila-Ortiz G, Gubler M, Romero-Bustillos M, Nicholas CL, Zimmerman MB, Barwacz CA. Efficacy of Alveolar Ridge Preservation: A Randomized Controlled Trial. J Dent Res. 2020;99: 402–409. pmid:32050833
- 22. Araújo MG, Silva CO, Misawa M, Sukekava F. Alveolar socket healing: what can we learn? Periodontol 2000. 2015;68: 122–134. pmid:25867983
- 23. Araújo MG, Lindhe J. Dimensional ridge alterations following tooth extraction. An experimental study in the dog. J Clin Periodontol. 2005;32: 212–218. pmid:15691354
- 24. Katranji A, Misch K, Wang H-L. Cortical Bone Thickness in Dentate and Edentulous Human Cadavers. J Periodontol. 2007;78: 874–878. pmid:17470021
- 25. Fokas G, Vaughn VM, Scarfe WC, Bornstein MM. Accuracy of linear measurements on CBCT images related to presurgical implant treatment planning: A systematic review. Clin Oral Implants Res. 2018;29 Suppl 1: 393–415. pmid:30328204
- 26. Moher D, Shamseer L, Clarke M, Ghersi D, Liberati A, Petticrew M, et al. Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement. 2015; 1–9. pmid:25554246
- 27. Liberati A, Altman DG, Tetzlaff J, Mulrow C, Gøtzsche PC, Ioannidis JPA, et al. The PRISMA Statement for Reporting Systematic Reviews and Meta-Analyses of Studies That Evaluate Health Care Interventions: Explanation and Elaboration. 2009;6. pmid:19621070
- 28. Tufanaru C, Aromataris E, Campbell J, Hopp L. systematic reviews of effectiveness. In: Aromataris E, Munn Z, editors. The JBI Manual for evidence synthesis. 2020. pmid:32458462
- 29. Acharya A, Hao J, Mattheos N, Chau A, Shirke P, Lang NP. Residual ridge dimensions at edentulous maxillary first molar sites and periodontal bone loss among two ethnic cohorts seeking tooth replacement. Clin Oral Implants Res. 2014;25: 1386–1394. pmid:25283689
- 30. Farina R, Pramstraller M, Franceschetti G, Pramstraller C, Trombelli L, Farina R, et al. Alveolar ridge dimensions in maxillary posterior sextants: A retrospective comparative study of dentate and edentulous sites using computerized tomography data. Clin Oral Implants Res. 2011;22: 1138–1144. pmid:21320169
- 31. Fayed MMS, Pazera P, Katsaros C. Optimal sites for orthodontic mini-implant placement assessed by cone beam computed tomography. Angle Orthod. 2010;80: 939–951. pmid:20578867
- 32. Gluckman H, Pontes CC, Du Toit J. Radial plane tooth position and bone wall dimensions in the anterior maxilla: A CBCT classification for immediate implant placement. J Prosthet Dent. 2018;120: 50–56. pmid:29195817
- 33. Horner KA, Behrents RG, Kim KB, Buschang PH. Cortical bone and ridge thickness of hyperdivergent and hypodivergent adults. Am J Orthod Dentofac Orthop. 2012;142: 170–178. pmid:22858325
- 34. Januário AL, Duarte WR, Barriviera M, Mesti JC, Araújo MG, Lindhe J. Dimension of the facial bone wall in the anterior maxilla: a cone-beam computed tomography study. Clin Oral Implants Res. 2011;22: 1168–1171. pmid:21320168
- 35. Katsoulis J, Enkling N, Takeichi T, Urban IA, Mericske-Stern R, Avrampou M. Relative Bone Width of the Edentulous Maxillary Ridge. Clinical Implications of Digital Assessment in Presurgical Implant Planning. Clin Implant Dent Relat Res. 2012;14: e213–e223. pmid:22375945
- 36. Klinge A, Ahmad M, Eldh P, Ulvan R, Andersson L, Becktor JP. Craniofacial height in relation to cross-sectional morphology of the anterior maxilla: An anatomical consideration in implant therapy. Int J Oral Maxillofac Implant. 2020;35: 386–394. pmid:32142576
- 37. López-Jarana P, Díaz-Castro CM, Falcão A, Falcão C, Ríos-Santos J V, Herrero-Climent M. Thickness of the buccal bone wall and root angulation in the maxilla and mandible: An approach to cone beam computed tomography. BMC Oral Health. 2018;18. pmid:30463614
- 38. Magat G. Radiomorphometric analysis of edentulous posterior mandibular ridges in the first molar region: a cone-beam computed tomography study. J Periodontal Implant Sci. 2020;50: 28–37. pmid:32128271
- 39. Misawa M, Lindhe J, Araújo MG. The alveolar process following single-tooth extraction: a study of maxillary incisor and premolar sites in man. Clin Oral Implants Res. 2016;27: 884–889. pmid:26566965
- 40. Bertl K, Mick R, Heimel P, Gahleitner A, Stavropoulos A, Ulm C. Variation in bucco-palatal maxillary sinus width does not permit a meaningful sinus classification. Clin Oral Implants Res. 2018;29: 1220–1229. pmid:30430654
- 41. Monje A, Wu Y, Huang W, Zhou W, Galindo-Moreno P, Montanero-Fernandez J, et al. Influence of Posterior Mandibular Dimensions on Alveolar Bone Microarchitecture. Int J Oral Maxillofac Implants. 2017;32: 423–430. pmid:28212456
- 42. El Nahass H, Naiem SN. Analysis of the dimensions of the labial bone wall in the anterior maxilla: A cone-beam computed tomography study. Clin Oral Implants Res. 2015;26: e57—e61. pmid:24450845
- 43. Nowzari H, Molayem S, Chiu CHK, Rich SK. Cone Beam Computed Tomographic Measurement of Maxillary Central Incisors to Determine Prevalence of Facial Alveolar Bone Width ≥2mm. Clin Implant Dent Relat Res. 2012;14: 595–602. pmid:20491811
- 44. Pramstraller M, Schincaglia G Pietro, Vecchiatini R, Farina R, Trombelli L, Pramstraller M, et al. Alveolar ridge dimensions in mandibular posterior regions: a retrospective comparative study of dentate and edentulous sites using computerized tomography data. Surg Radiol Anat. 2018;40: 1419–1428. pmid:30167819
- 45. Song J-M, Lee J-Y, Kim Y-D. CBCT Morphologic Analysis of Edentulous Posterior Mandible for Mandibular Body Bone Graft. J Oral Implantol. 2015;41: 477–482. pmid:24404875
- 46. Temple KE, Schoolfield J, Noujeim ME, Huynh-Ba G, Lasho DJ, Mealey BL. A cone beam computed tomography (CBCT) study of buccal plate thickness of the maxillary and mandibular posterior dentition. Clin Oral Implants Res. 2016;27: 1072–1078. pmid:26364803
- 47. Yu SJ, Lee YH, Lin CP, Wu AYJ. Computed tomographic analysis of maxillary sinus anatomy relevant to sinus lift procedures in edentulous ridges in Taiwanese patients. J Periodontal Implant Sci. 2019;49: 237–247. pmid:31485374
- 48. Bonta H, Carranza N, Gualtieri AF, Rojas MA. Morphological characteristics of the facial bone wall related to the tooth position in the alveolar crest in the maxillary anterior. Acta Odontol Latinoam. 2017;30: 49–56. pmid:29248938
- 49. Braut V, Bornstein M, Lauber R. Bone Dimensions in the Posterior Mandible: A Retrospective Radiographic Study Using Cone Beam Computed Tomography. Part 1—Analysis of dentate Sites. Int J Periodontics Restorative Dent. 2012;32: 175–184. pmid:22292147
- 50. Braut V, Bornstein M, Kuchler U, Buser D. Bone Dimensions in the Posterior Mandible: A Retrospective Radiographic Study Using Cone Beam Computed Tomography. Part 2—Analysis of Edentulous Sites. Int J Periodontics Restorative Dent. 2014;34: 639–647. pmid:25171034
- 51. Bressan E, Ferrarese N, Pramstraller M, Lops Di, Farina R, Tomasi C. Ridge Dimensions of the Edentulous Mandible in Posterior Sextants: An Observational Study on Cone Beam Computed Tomography Radiographs. Implant Dent. 2017;26: 66–72. pmid:27824716
- 52. Cho H-J, Jeon J-Y, Ahn S-J, Lee S-W, Chung J-R, Park C-J, et al. The preliminary study for three-dimensional alveolar bone morphologic characteristics for alveolar bone restoration. Maxillofac Plast Reconstr Surg. 2019;41. pmid:31531306
- 53. Deguchi T, Nasu M, Murakami K, Yabuuchi T, Kamioka H, Takano-Yamamoto T. Quantitative evaluation of cortical bone thickness with computed tomographic scanning for orthodontic implants. Am J Orthod Dentofac Orthop. 2006;129: 721.e7—721.e12. pmid:16769488
- 54. de Souza Nunes LS, Bornstein MM, Sendi P, Buser D. Anatomical Characteristics and Dimensions of Edentulous Sites in the Posterior Maxillae of Patients Referred for Implant Therapy. Int J Periodontics Restor Dent. 2013;33: 337–345. pmid:23593627
- 55. Ulm C, Solar P, Gsellmann B, Matejka M, Watzek G. The edentulous maxillary alveolar process in the region of the maxillary sinus—a study of physical dimension. Int J Oral Maxillofac Surg. 1995;24: 279–282. Available: http://www.embase.com/search/results?subaction=viewrecord&from=export&id=L126186646 pmid:7490490
- 56. Baumgaertel S, Hans MG. Buccal cortical bone thickness for mini-implant placement. Am J Orthod Dentofac Orthop. 2009;136: 230–235. pmid:19651353
- 57. Tsigarida A, Toscano J, de Brito Bezerra B, Geminiani A, Barmak AB, Caton J, et al. Buccal bone thickness of maxillary anterior teeth: A systematic review and meta-analysis. J Clin Periodontol. 2020; 1326–1343. pmid:32691437
- 58. Fayed MMS, Pazera P, Katsaros C. Optimal sites for orthodontic mini-implant placement assessed by cone beam computed tomography. Angle Orthod. 2010;80: 939–951. pmid:20578867
- 59. Pramstraller M, Schincaglia G Pietro, Vecchiatini R, Farina R, Trombelli L. Alveolar ridge dimensions in mandibular posterior regions: a retrospective comparative study of dentate and edentulous sites using computerized tomography data. Surg Radiol Anat. 2018;40: 1419–1428. pmid:30167819
- 60. Monje A, Chan H-L, Galindo-Moreno P, Elnayef B, Suarez-Lopez del Amo F, Wang F, et al. Alveolar Bone Architecture: A Systematic Review and Meta-Analysis. J Periodontol. 2015;86: 1231–1248. pmid:26177631
- 61. Wang SH, Shen YW, Fuh LJ, Peng SL, Tsai MT, Huang HL, et al. Relationship between Cortical Bone Thickness and Cancellous Bone Density at Dental Implant Sites in the Jawbone. Diagnostics. 2020;10. pmid:32957724
- 62. Glenny AM, Esposito M, Coulthard P, Worthington H V. The assessment of systematic reviews in dentistry. Eur J Oral Sci. 2003;111: 85–92. pmid:12648258
- 63. Koletsi D, Fleming PS, Michelaki I, Pandis N. Heterogeneity in Cochrane and non-Cochrane meta-analyses in orthodontics. J Dent. 2018;74: 90–94. pmid:29738788