https://orcid.org/0000-0002-9636-3855
Figures
Abstract
The past decade has been a golden age for microbiology, marked by the discovery of an unprecedented increase in the number of novel bacterial species. Yet gaining biological knowledge of those organisms has not kept pace with sequencing efforts. To unlock this genetic potential there is an urgent need for generic (i.e. non-species specific) genetic toolboxes. Recently, we developed a method, termed chassis-independent recombinase-assisted genome engineering (CRAGE), enabling the integration and expression of large complex gene clusters directly into the chromosomes of diverse bacteria. Here we expand upon this technology by incorporating CRISPR-Cas9 allowing precise genome editing across multiple bacterial species. To do that we have developed a landing pad that carries one wild-type and two mutant lox sites to allow integration of foreign DNA at two locations through Cre-lox recombinase-mediated cassette exchange (RMCE). The first RMCE event is to integrate the Cas9 and the DNA repair protein genes RecET, and the second RMCE event enables the integration of customized sgRNA and a repair template. Following this workflow, we achieved precise genome editing in four different gammaproteobacterial species. We also show that the inserted landing pad and the entire editing machinery can be removed scarlessly after editing. We report here the construction of a single landing pad transposon and demonstrate its functionality across multiple species. The modular design of the landing pad and accessory vectors allows design and assembly of genome editing platforms for other organisms in a similar way. We believe this approach will greatly expand the list of bacteria amenable to genetic manipulation and provides the means to advance our understanding of the microbial world.
Citation: Liu H, Robinson DS, Wu Z-Y, Kuo R, Yoshikuni Y, Blaby IK, et al. (2020) Bacterial genome editing by coupling Cre-lox and CRISPR-Cas9 systems. PLoS ONE 15(11): e0241867. https://doi.org/10.1371/journal.pone.0241867
Editor: Paul Jensen, University of Illinois at Urbana-Champaign, UNITED STATES
Received: July 6, 2020; Accepted: October 21, 2020; Published: November 4, 2020
Copyright: © 2020 Liu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the manuscript and its Supporting Information files.
Funding: The work conducted by the U.S. Department of Energy Joint Genome Institute, a DOE Office of Science User Facility, is supported under Contract No. DE-AC02-05CH11231.
Competing interests: No conflict of interest declared.
Introduction
Second and third generation sequencing technologies, and in particular, shotgun metagenomics, have expanded our knowledge of the microbial diversity dramatically [1]. The development of new culturing approaches and the isolation of microbes from wide-ranging environmental sources has drawn the attention of both the medical and industrial fields, with particular interests in those organisms exhibiting unique biophysical and/or biochemical properties [2–5]. However, our ability to understand and harness this novel functional diversity is hindered by limited genetic tools [6–8].
To help address the limitation of universally applicable molecular approaches, we previously developed the CRAGE technology [9]. CRAGE comprises a two-plasmid system consisting of a 2-lox landing pad vector and an accessory vector. The landing pad vector contains the mariner transposase on the backbone, and in between the two inverted repeats (IR) is the transposon. The transposon has two lox sites, with a selectable marker and Cre recombinase in between. The accessory vector contains the same two lox sites, whose orientation matches those of the landing pad vector, flanking the desired non-native genes/pathway. The landing pad was introduced into the chromosome via mariner-based transposon insertion, and the custom pathway integrated into the landing via Cre-lox recombinase-mediated cassette exchange (RMCE). Since both the transposon and the Cre-lox recombineering systems were applied to diverse hosts, CRAGE enabled insertion of large biosynthetic gene clusters into 25 diverse gammaproteobacterial species. However, this approach does not provide capabilities beyond insertion, such as gene deletions or modulated gene expression.
The type II CRISPR-Cas system from Streptococcus pyogenes, incorporating the signature endonuclease Cas9, has rapidly become a widely adopted tool for genome editing due to its near universal application and ease of target programming [10–12]. It is able to carry out complex genome editing tasks, including gene deletions, SNPs, and gene insertions. With further modification on the catalytic activity of Cas9, other genetic perturbations are possible. These include using a catalytically inactive version of Cas9 (dCas9) for transcriptional repression (CRISPRi) [13] and also transcriptional activation (CRISPRa) could be achieved by fusing a transcriptional activator to the C-terminal of dCas9 [14, 15].
The first bacterial CRISPR-Cas9 genome editing was demonstrated in Streptococcus pneumoniae and Escherichia coli in 2013 [16]. While the number of bacteria documented to have been engineered by CRISPR-Cas9 editing is expanding, the pace for developing such tools is slow [17], and several challenges have been associated with this technique. First, high level expression of Cas9 could be toxic in some species, which may be exacerbated when expressed from a high copy plasmid [18, 19]. Second, many bacteria lack strong DNA repair systems to fix the double strand breaks during editing, which could cause cell death [16, 20]. Finally, many currently described CRISPR-Cas9 systems for bacterial editing employ one or several plasmids, and thus an efficient plasmid curing strategy is preferred for sequential editing [21, 22]. Given these obstacles, developing CRISPR-Cas9 functionality for a new bacterial isolate can be a laborious process, and does not match the pace of identification of new microbial species [5]. Versatile approaches with broad applicability to many species would enable rapid genetic interrogation of many organisms simultaneously without the need to develop custom methodologies [23].
In this work, we aimed to develop a method that combines the universality of both CRISPR-Cas9 and CRAGE, enabling the breadth of CRISPR-mediated editing to be applied as widely as Cre-lox functionality. Taking advantage of the broad host functionality of those genetic parts, this single genetic engineering system enables us to genetically manipulate novel bacterial isolates across species, and thus accelere the rate at which they can be investigated.
Towards this goal, we first integrated a Cre-lox system into the chromosomes of target species. Cas9 machinery was introduced by RMCE, then the sgRNA and repair template were introduced via a second round of RMCE. This offers an alternative solution for organisms that do not have a replicative plasmid system. To demonstrate our approach, we used this system to carry out targeted editing in four taxonomically diverse gammaproteobacterial species [24]. We systematically evaluated the editing efficiency across 10 different loci in Photorhabdus luminescens, where the editing efficiency varied from 31% to 100%. We demonstrated that the Cas9 machinery could be removed scarlessly from P. luminescens subsequent to achieving the desired edits. Since the key components (transposase, Cre-lox, CRISPR-Cas9) for this system are known to be functional across different phyla [17, 25–28], we anticipate they could be used as standard genetic parts with relatively minor modification to provide applications to a broad range of organisms.
Results
Designing a genome editing approach using the combination of a 3-lox landing pad and CRISPR-Cas9
Our overall approach is illustrated in Fig 1. To achieve stable expression of the components for CRISPR-Cas9 genome editing, we designed a 3-lox CRAGE based approach. This design allows editing machinery to be inserted into the 1st location (between wild type loxP and lox5171), and target-specific sgRNA and DNA repair donor template to be inserted into the 2nd location (between lox2272 and loxP) of the landing pad. The overall workflow utilizes three vectors: a landing pad vector and two accessory vectors. Each was introduced to the host by conjugation, which is a well-established strategy for introducing foreign DNA into diverse organisms [29].
(A): Chromosomal integration of the landing pad vector by mariner-based transposon system. (B): Chromosome integration of the Cas9 and RecET via RMCE. (C): Chromosome integration of the sgRNA and donor template via RMCE, followed by genome editing at the specific target site. The orientation of lox sites was kept consistent in all the vectors. IR is the transposon-specific inverted repeats. oriT is the origin of transfer. KanR and AprR are antibiotic resistance cassettes for kanamycin and apramycin, respectively. OriS, oriV and R6K are different replication origins.
The transposon-based landing pad plasmid used in this study (pCC1-3L) contains a wild-type and two mutated lox sites separating Cre and a kanamycin selectable marker gene (Fig 1A). We employed wild-type loxP, lox2272, and lox5171 since these sites can recombine efficiently with themselves, but not or only rarely with each other [30, 31]. The transposase and kanamycin resistant gene and their promoters were from the original pKMW2 transposon because it has been shown to be functional in at least 22 different Proteobacteria from the classes of alpha, beta and gamma [25]. We used the Cas9 promoter originating from S. pyogenes to drive the expression of Cre. Each of these components were cloned into a single copy vector pCC1FOS (Epicentre, Madison, USA) (to avoid intermolecular recombination that would occur in a non-single copy vector) to generate pCC1-3L.
Once pCC1-3L was conjugated into the recipient strain, expression of the transposase catalyzes integration of the transposon into the genome (Fig 1A). To minimize the likelihood of gene disruption of the strain, transformants containing intergenic insertions of the landing pad were selected whenever possible for further modification and editing (see methods section).
Subsequent to the integration of the landing pad, the sequential introduction of two accessory vectors is necessary to deliver Cas9 and the editing-specific sgRNA and repair template. The first accessory vector, pR6K-loxWT5171-SpCas9 (Fig 1B), contains lox sites matching those flanking the kanamycin selectable marker in the landing pad (S1 Fig). Between this pair of lox sites are the original S. pyogenes Cas9 driven by its native promoter, the bacteriophage RecET recombination system under the arabinose inducible promoter ParaB, and an apramycin selectable marker. We incorporated the rac prophage derived recombination system RecE and RecT to account for the possibility that the host-encoded homologous recombination is not efficient enough to repair the double-stranded break generated by Cas9.
The first accessory vector carries the R6K origin of replication. The replication of R6K derived plasmids is dependent on the pir gene-encoded π protein for replication. Consequently, when transformed into a host lacking the pir gene, and selected with apramycin, only transformants that went through Cre-assisted cassette exchange will grow (Fig 1B), thus providing selection for the first RMCE.
The second accessory vector also carries the R6K replication origin and a pair of lox sites flanking the sgRNA, the donor template for DNA repair and kanamycin marker (recycled after the first RMCE) (S1 Fig). This second RMCE event resulted in the loss of Cre and editing at the target site. (Fig 1C). Our decision to integrate the sgRNA and the repair template into the chromosome came from the concern that a relatively high expression level of the gRNA is necessary for efficient editing [32]. This way both the gRNA and the repair template is propagating with the cells, so that even if there is a delay of gRNA expression the repair template would always be present to fix the double-stranded breaks.
Genome editing in four gammaproteobacterial species
Chromosome integration of 3-lox landing pads.
To evaluate the broad application of our approach, we tested our methods in four different gammaproteobacteria: Aeromonas salmonicida subsp. pectinolytica 34mel, Pseudomonas simiae WCS417, Shewanella oneidensis MR-1, and Photorhabdus luminescens subsp. laumondii TT01. The landing pad vector was successfully introduced into all four strains by conjugation and kanamycin-resistant transformants were obtained. The landing pad integration sites in those transformants were identified using inverse PCR and sequencing [33]. We then selected a transformant with the transposon insertion site that has the least impact on cell growth (in comparison to a wild-type strain) as determined by a growth curve assay (S2 Fig). The 3-lox landing pad integration sites for each selected strain used for downstream genome editing are listed in S2 Table.
Integration of Cas9 and recombinase genes.
We introduced the first accessory vector, pR6K-loxWT5171-SpCas9, into each gammaproteobacterial parent strain again by conjugation. RMCE-positive colonies were first selected for gain of resistance to apramycin and loss of resistance to kanamycin on agar plates. Then we tested the presence of Cas9 gene and absence of the pR6K vector backbone by PCR amplification of the genomic DNA to confirm successful cassette exchange of the first accessory vector (data not shown).
Insertion of sgRNA and donor DNA to achieve genome editing.
To rapidly test CRISPR-Cas9 editing in each strain, we identified genes with either a clear visual phenotype that can easily be assayed, or genes involved in secondary metabolites production (Table 1). For A. salmonicida subsp. pectinolytica 34mel, we selected the hpd gene, encoding 4-hydroxyphenylpyruvate dioxygenase. Loss of hpd abolishes production of melanin, leading to the loss of the dark brown color of the colony [34]. For P. simiae WCS417, we selected the gene encoding the thioesterase, which is involved in the final step in the biosynthesis of pyoverdine, a siderophore [35, 36]. For S. oneidensis MR-1, we chose the flaG gene as a deletion target. Mutation of flaG leads to the disassembly of the flagella, and thus loss of motility. This mutant phenotype can be easily assayed on soft agar plates [37]. For P. luminescens subsp. laumondii TT01, we selected 10 different target genes with each encoding a predicted non-ribosomal peptide/polyketide synthase (Table 1).
The pCC1-3L and pR6K-loxWT5171-SpCas9 vectors described above are universally applied to the four bacteria. In contrast, the second accessory vector carries the sgRNA and DNA repair template and is therefore unique to each edit. We designed the second accessory vector for each target locus specifically. The second accessory vector contains donor template, sgRNA and kanamycin selection marker that are flanked by a pair of lox sites compatible with those flanking Cre in the landing pad. We kept the length of the donor template homologous arms in the range of 400 ~ 700 bp, and a spacer was identified specific to the targeted deletion region (see Methods for details). We took the conserved sequences 5’ to the recipient host’s 16S rRNA as promoters for the expression of the sgRNA and used 90 bp 3’ to the 5S rRNA as terminators. We introduced the second accessory vector by conjugation, and transformants were selected on plates supplemented with kanamycin, apramycin, and arabinose ensuring maintenance of the editing machinery and expression of recET. The intended edits were verified by colony PCR. We also confirmed the second cassette exchange by PCR amplification of the pR6K vector backbone and sgRNA payload (data not shown). Fig 2 demonstrates the edited deletion of the flaG gene in S. oneidensis MR-1. The screening of targeted genome edits in other three bacteria discussed above was carried out in a similar way (S3–S5 Figs).
(A): The editing schematic diagram and screening primers are shown for deletion of the flaG gene. (B): The phenotype of different S. oneidensis strains. WT, wild type. Cas9, the wild type strain harboring Cre, Cas9, RecET and AprR in the chromosome. Cas9+sgRNA, the wild type strain harboring donor template, sgRNA, KanR, Cas9, RecET and AprR in the chromosome. (C): PCR screening of the initial transconjugant colonies. L: DNA ladder. WT: wild type as positive control. 1–16: 16 randomly picked colonies.
To address any potential off-target DNA sequence changes, we used a whole genome gRNA selection software gRNA-SeqRET (Simirenko et al., manuscript in preparation) to detect any genomic sequences that have less than 5-bases mismatch with any of the selected protospacers (spacers and associated PAM). We found only one protospacer (NRPS_7, Table 1) that has one 3-bases and three 4-bases mismatches with other loci in the P. luminescens genome. We sequenced these loci and verified that none of these sites has been edited. For the rest of the 12 protospacers, there was no potential off-target sites with less than 5 bases mismatch. The details of the off-target analysis were provided in S1 File.
Genome editing occurs at various stages of cell development in Photorhabdus luminescens
The described method provides no selective pressure for the targeted editing, so a high Cas9 editing efficiency is crucial for this approach to work. To assess this, we carried out a cross-loci editing comparison in P. luminescens, and determined editing efficiencies for each target locus by colony PCR. After transforming with the second accessory vector, we selected 16 random colonies (if there were less than 16 transformants we selected all available; S5 Fig). In many cases, colonies initially contained both edited and unedited cells. However, when we re-streaked these chimeric colonies, successfully edited cells were obtained in every case (S4C Fig). This result suggests that the colony only yielding an amplicon of edited cells may still contain a very small percentage of the unedited cells, which cannot be detected by regular colony PCR screening. Therefore, we reported the editing efficiency by including the edited, chimeric, and unedited colonies based on the PCR results of transconjugants growing for 20 hours on agar plates (Fig 3). These results also suggest that more robust editing may result from routinely passaging transformant colonies under selection prior to verification. The editing efficiency ranges from 31%– 100% if only counting the edited colonies, the efficiency increases to 88%– 100% if including both edited and chimeric colonies. Overall, our data suggest that our Cas9 system could achieve high efficiency for accurate deletion editing in P. luminescens.
Edited: colony PCR yielding an amplicon of edited cells. Chimeric: colony PCR yielding mixed amplicons with both edited and unedited cells. Unedited: PCR only yielding an amplicon of unedited cells.
We have also observed different percents of chimeric colonies resulted from editing of different targets [38]. Some loci (NRPS_3 and NRPS_11) show a high percentage of chimerism, where others (NRPS_7 and NRPS_10) show a very small number or no chimeric colonies. We postulate that this difference may be due to the difference in Cas9 accessibility of different loci. Therefore, editing of different targets can occur at various stages during cell development. This chimerism phenotype can also vary from species to species, for example, we have also seen this in A. salmonicida and P. simiae, but not in S. oneidensis (Fig 2 and S3 and S4 Figs).
Curing of landing pad and Cas9 after genome editing in P. luminescens
To minimize the phenotypic effects of the integrated machinery, which may confound downstream experiments, an effective curing strategy to remove the editing cassettes after editing is necessary. We used the Cas9 self-targeting strategy to remove these scars in P. luminescens. To do this, we cloned a sgRNA targeting Cas9 and the genomic DNA flanking the 3-lox landing pad insertion site as the repair template (S2 File) into pCC1FOS (the same backbone as pCC1-3L), to generate pCC1-LPCure-pw1 for curing. Vector with this replication origin is retained in most gammaproteobacteria under selective pressure, yet is rapidly lost in the absence of selection [39]. We again used colony PCR to confirm the curing of the landing pad with integrated editing machinery (Fig 4). We didn’t include an uncured control because the expected amplicon was too large to amplify for a regular PCR. To further verify the curing, we performed whole genome sequencing on selected cured isolates along with a wild-type P. luminescens, and a landing pad with Cas9 inserted strain. The sequence alignment of the targeted edited site and the 3-lox landing pad insertion site further confirmed the successful removal of the editing machinery (Fig 4D). The cells also lost the curing plasmid after successive culturing without the presence of antibiotics.
(A): The curing schematic diagram and screening primers are shown for curing the editing machinery (not drawn to scale). (B): The structure of the curing plasmid. (C): PCR screening after curing (the larger band in isolate 6 is a non-specific amplification). L: DNA ladder. WT: wild type as positive control. 1–16: 16 randomly picked colonies. (D) The sequence alignment analysis of three strains at two specific loci on the chromosome. CGGAZ, CGGBB, and CGGBG denote as reads generated from a wild-type strain, an edited strain carrying the landing pad, Cas9, and sgRNA, and an edited strain with landing pad removed, respectively. The red vertical lines indicate the 3 lox sites in the landing pad.
Discussion
We developed a chromosomally integrated CRISPR-Cas9 system that we have demonstrated to be easily applicable to several gammaproteobacterial species. The method involves the insertion of a Cre-lox-containing landing pad into the chromosome by transposon integration. We incorporated three mutually exclusive lox sites facilitating two sequential rounds of Cre-assisted cassette exchange. The first round of RMCE brings in Cas9 and RecET to the chromosome. The second round of RMCE brings in the sgRNA and donor template. By integrating all the components into the chromosome, we have demonstrated (1) genome editing in bacterial cells without a need for a replicative plasmid system, and (2) that the integrated landing pad and Cas9 can be removed to achieve scarless editing of bacteria genome. To the best of our knowledge, this work constitutes the first report of Cas9-based genome editing system for A. salmonicida, P. simiae and P. luminescens.
The system takes advantage of well-characterized genetic parts that are known to be functional in taxonomically diverse bacterial species, likely expanding the utility of our approach with minor modifications to other classes beyond the present study. Those key elements include the mariner transposon system, Cre-lox recombinase system, CRISPR-Cas9, RecET orthologous pair for DNA double strand break repair, and several antibiotic selection markers. We demonstrated the successful application of this approach to species from four taxonomically diverse orders (Alteromonadales, Pseudomonadales, Enterobacterales and Aeromonadales) within gammaproteobacteria, which underscores the likely broader applicability of our approach to many or perhaps most of this lineage.
It is certainly possible were we to place the Cre, the Cas9 and recET recombinase genes outside the lox sites, and only use the lox sites for exchanging the sgRNA and donor template as a simplified, scaled down version of our design, could work. However, the 3-lox landing pad offers more versatility than either 2-lox or 1-lox landing pads; for example, once the landing pad has integrated, different editing machinery recognizing distinct PAM sequences can easily be exchanged as desired within the same genome. The versatility offered by the 3-lox landing pad is especially adaptable in cases where more than one type of editing enzymes such as dCas9 and/or aCas9 are desired in addition to the regular Cas9. Consequently, and with only minor changes to our outlined workflow, complex engineering can be achieved.
Multiple editing can be achieved by performing sequential editing. There are two options enabling sequential editing using the 3-lox system. First, we can move the Cre recombinase gene to outside the lox sites (between IR and lox2272 for example; Fig 1). This way we can continue using the 2nd lox exchange site (between lox2272 and loxP) for swapping in new editing targets carrying a different selectable marker. Secondly, including only a single lox site on the 2nd accessory vector (which carries sgRNA and donor DNA template), as the RMCE will insert the entire 2nd accessory vector into the landing pad. Under appropriate antibiotic selection, the sgRNA and donor template should remain inside the landing pad despite being flanked by two identical lox sites. After editing, the entire 2nd accessory vector can be removed again by Cre-lox recombination when selective pressure is lifted. Subsequent to this event, cells carrying only the Cre and Cas9 will be primed for additional editing.
We observed chimeric phenotypes in the editing of three out of four organisms, indicating that chimerism is rather common (at least in the organisms used in this study). A chimeric colony is formed when the editing initiates after the first few cell divisions. This result suggests that the cells can tolerate the presence of Cas9 and sgRNA throughout the cell divisions. An open question is why editing does not always occur at the same stage and how some cells can delay or skip the editing until a later stage. We plan to take advantage of this delay editing characteristics and insert the landing pad curing sgRNA and donor template into the 2nd lox exchange site. The delay editing would then allow us to select colonies for the insertion of the curing sgRNA and donor template first, then remove the antibiotics selection enabling the curing of the whole landing pad.
In this study the genetic parts (promoters, coding genes, and selectable markers) used in the 3-lox landing pad are functional in bacteria across the gammaproteobacterial classes. We believe this strategy has significant potential for genome engineering in bacteria of other phyla if we can tailor those genetic parts that are necessary to work in another phylum. Given the broad functionality of phage-derived genetic elements [40], one future endeavor could be to incorporate a T7 RNA polymerase driven by a host-specific promoter. The host-specific promoter will ensure the expression of the T7 RNA polymerase thus ensuring the expression of the key components.
Ultimately, the goal of this work was to provide a generalizable strategy for domesticating bacteria through genome editing, thereby accelerating our ability to engineer microbes in the microbiome era. We demonstrated here the feasibility to apply a single system to achieve precise genome editing in multiple Proteobacterial species. We predict that the list of bacterial species amenable to this genome editing method will continue to expand considering the solid cross-species functionality of all the key components of this method. We anticipate that our work will inspire future genetic tool development to overcome the cross-species challenge.
Materials and methods
Bacterial strains and growth conditions
The bacterial strains used and generated in this study are listed in S1 and S2 Tables. Escherichia coli TOP10 cells were used for plasmid assembly. E. coli BW29427 (aka WM3064) was used as a conjugal donor strain. All growth media were purchased from Teknova (www.teknova.com), and other chemicals were purchased from Sigma-Aldrich. E. coli was grown in LB medium at 30°C supplemented with antibiotics as needed: 50 μg/ml carbenicillin, 20 μg/ml chloramphenicol, 50 μg/ml kanamycin, 50 μg/ml apramycin. To culture E. coli BW29427, a final concentration of 300 μM diaminopimelic acid (DAP) was supplemented in LB. The culturing conditions of the edited strains are listed in S3 Table.
DNA manipulation
All primers were ordered from Invitrogen (Thermo Fisher Scientific). Synthetic DNA fragments were ordered either from Integrated DNA Technologies (IDT) or from Thermo Fisher Scientific. PCR and Gibson assembly were performed using Q5 hot start DNA polymerase and Gibson Assembly HiFi HC 1-step kit (SHI-DNA, Inc. CA), respectively according to the manufacturer’s directions. Plasmid DNA was isolated using the QIAprep spin miniprep kit and genomic DNA was extracted using Wizard genomic DNA purification kit (Promega). We used the Zymo clean gel DNA recovery kit to further purify DNA (Zymo Research).
Plasmid construction
The sequence maps of the vectors are listed in S2 File. The primers and PCR template, including gBLOCKs, were listed in S6 Table. Constructs were sequence-verified by either Sanger Sequencing or Pacific Biosciences Sequencing.
The 3-lox landing pad vector pCC1-3L
The landing pad vector was constructed with five DNA fragments comprising (1) parC, parB, parA, repE, oriS, oriV, redF, and a Mariner IR, (2) lox2272, (3) Cre, (4) loxP, and (5) KanR, lox5171, Mariner IR, oriT and Mariner transposase. Fragments 1, 3 and 5 were PCR amplified from pW17 (Wang et al., 2019), and fragments 2 and 4 were PCR amplified from a synthetic DNA fragment, 2lox.gBLOCK (S6 Table). Fragments 2 to 5 were then fused together by overlapping PCR, and then assembled with fragment 1 by Gibson Assembly. The sequences of the 3 lox sites are listed in S4 Table.
The 1st accessory vector pR6K-loxWT5171-SpCas9
The Cas9 was first PCR amplified from Streptococcus pyogenes genomic DNA and cloned into the NcoI site of the pKD46 vector (The Coli Genetic Stock Center) by Gibson Assembly. The resulted pKD46-SpCas9 plasmid was then used as the template to amplify two fragments, one containing the tL3-Cas9 and the other containing the araC-pBAD cassette. These two fragments were then Gibson assembled together with four other PCR amplified fragments to form the pR6K-loxWT5171-SpCas9R4 plasmid. Of the four fragments, two contain the oriT and loxP amplified from pW17, one contains the AprR-lox5171-R6K cassette amplified from the pW34 plasmid (Wang et al. 2019), and one synthetic DNA fragment contains the recET recombinase gene (RecET.gBLOCK).
The 2nd accessory vectors
For cloning sgRNA and donor template, we first constructed a vector pR6K-lox2272WT by Gibson Assembly using 4 PCR amplified DNA fragments comprising (1) R6K and oriT, (2) lox2272, (3) KanR, and (4) loxP. These fragments were amplified from either pCC1-3L or pR6K-loxWT5171-SpCas9 plasmids (S6 Table).
The pR6K-lox2272WT vector was then used to clone the sgRNA scaffolds in two different approaches. In cases of S. oneidensis, P. simiae, and P. luminescens, we clone a synthetic DNA fragment containing either the 16S promoter-spacer-sgRNA scaffold-5S terminator cassette or just the spacer-sgRNA scaffold-5S terminator cassette with a PCR amplified 16S promoter into the ZraI site of the pR6K-lox2272WT. The single spacer of these plasmids was then replaced with a linker sequence containing two BsaI sites by PCR to allow cloning of additional spacers. In case of A. salmonicida, we PCR amplified the 16S promoter and 5S terminator from genomic DNA, and an sgRNA scaffold from synthetic DNA, and Gibson assembled them into the ZraI site of the pR6K-lox2272WT. In the design of PCR primers, we also incorporated two BsaI sites 5’ to the sgRNA scaffold to allow cloning of spacers (S6 Fig). The primers and synthetic DNA used in the construction of these sgRNA scaffold containing vectors are listed in S6 Table.
The sgRNA targets were synthesized as forward and reverse oligos (S6 Table). These oligos were annealed to form 4-base overhangs on either side of the spacers, which can then be ligated into the BsaI sites of these organism specific sgRNA scaffold containing vectors. The spacer containing vectors were then used to clone the donor template at the unique SacI site of the vectors. The donor templates containing upstream and downstream regions of the targeted deletion sites were amplified by PCR using the primers listed in S6 Table.
The curing vector
The curing plasmid for P. luminescens was constructed in two steps. First, we constructed the intermediate vector pCC1-LPCure, by Gibson Assembly of 5 PCR amplified DNA fragments comprising (1) parC, parB, parA, partial repE, (2) partial repE, oriS (ori2), oriV, redF, and Cat, (3) oriT, (4) 16S promoter, and (5) sgRNA scaffold and 5S terminator. Then two primers (Cas9-sgRNA.fwd and Cas9-sgRNA.rev) were annealed together to form the spacer targeting the Cas9 and cloned into AarI digested pCC1-LPCure. The resulted plasmid was then digested with SacI to clone in the PCR amplified donor template (S6 Table) by Gibson Assembly. The final curing plasmid is pCC1-LPCure-pw1.
Conjugation transformation procedures
Plasmids were introduced to the target organisms by conjugation. Overnight cultures of both donor and recipient strain cells were diluted into fresh medium (1:100 ratio) and grew until they had reached a density of 1 at 600nm. The donor cells were washed with fresh medium without antibiotics three times, and the recipient cells with different ratios (S3 Table) were mixed together, pelleted and resuspended to the final volume of 60 μL with LB liquid medium supplemented with DAP. The resuspension was spotted onto a MF-Millipore 0.45 μm gravimetric analysis membrane filter, and incubated overnight on an LB agar plate supplemented with DAP at 30°C. The next day, the conjugation mixture was scraped off from the membrane and resuspended into 1 mL fresh LB, different serial dilutions were plated onto LB agar plate supplemented with appropriate antibiotics but without DAP for the counter selection of the E. coli donor cells. Plates were incubated for 1~3 days.
Mapping the chromosomal integration location of the landing pad
We mapped the landing pad insertion site using inverse PCR (Martin and Mohn, 2002). We used a 4-base cutter enzyme (either HpyCH4IV or NlaIII) to digest extracted chromosomal DNA of kanamycin resistant transformants, followed by a ligation reaction to circularize the fragments. Specific regions of interest were PCR amplified using primers (S5 Table) designed to flank the integrated transposon and sequence verified.
Selection of spacer for sgRNA
We manually selected the spacer for the sgRNA for each targeted gene using the following criteria. (i) The spacer sequence is located in the upstream regulatory or coding sequence region; (ii) it must immediately precede a 5’-NGG protospacer adjacent motif (PAM); (iii) this spacer does not match with any other loci in the genome; (iv) the GC content of the spacer is between 40~60%; (v) there is no inverted repeats or direct repeats. We also used an in house gRNA selection tool, gRNA-SeqRET (Simirenko et al., manuscript in preparation) to identify potential off-target loci. For any possible off-target sequences with less than 5 bases mismatch, we designed primers and carried out sequencing analysis of the amplicons.
Validation of CRISPR-Cas9 edited mutants
We picked 16 colonies that were both apramycin and kanamycin resistant, and PCR amplified and sequencing validated each targeted region. The primers used for screening were listed in S6 Table.
Sequencing verification of the removal of the editing machinery in P. luminescens
Genomic DNA from a wild-type P. luminescens subsp. laumondii TT01, an edited NRPS_1 deleted strain carrying the landing pad and CRISPR-Cas9 machinery, and an edited NRPS_1 deleted strain with the landing pad removed were purified and sequenced using the PacBio RSII sequencer according to the manufacture protocol (Pacific Biosciences Inc. CA). P. luminescens subsp. laumondii TTO1 (GenBank: BX470251.1) that contained the insertion of Landing Pad was used as a reference for mapping. The insertion site of the landing pad was based on previous verification. Mapping was performed using cleaned-up PacBio subreads with Minimap2 [41]. SAMtools was used to summarize mapping results and generate bam files for genome browser [42].
Supporting information
S1 Fig. The two Cre-lox Recombinase-Mediated Cassette Exchange (RMCE) events (not drawn to scale).
https://doi.org/10.1371/journal.pone.0241867.s001
(TIF)
S2 Fig. Growth curve of the wild type strain and its landing pad insertion derivative for four species.
(A-D): A. salmonicida subsp. Pectinolytica 34mel, P. luminescens subsp. laumondii TT01, P. simiae WCS417r and Shewanella oneidensis MR-1, respectively. The growth curve was carried out in LB medium at 30°C with biological duplicates.
https://doi.org/10.1371/journal.pone.0241867.s002
(TIF)
S3 Fig. Construction of Cas9-mediated A. salmonicida hpd gene deletion mutants.
(A): The editing schematic diagram and screening primers are shown for hpd gene deletion (Asalp_21790) (not drawn to scale). (B): PCR screening of the initial transconjugant colonies. L: DNA ladder. WT: wild type as positive control. 1–16: 16 randomly picked colonies. (C) The phenotype of different A. salmonicida strains. WT, wild type. Cas9+sgRNA, the wild type strain harboring donor template, sgRNA, KanR, Cas9, RecET and AprR in the chromosome. Cas9, the wild type strain harboring Cre, Cas9, RecET and AprR in the chromosome.
https://doi.org/10.1371/journal.pone.0241867.s003
(TIF)
S4 Fig. Construction of Cas9-mediated P. simiae thioesterase encoding gene deletion mutants.
(A): The editing schematic diagram and screening primers are shown for deletion of the thioesterase encoding gene (PS417_19550) (not drawn to scale). (B): PCR screening of the initial transconjugant colonies. (C): PCR screening of the colonies streaked out from an initial chimeric transconjugant colonies. L: DNA ladder. WT: wild type as positive control. 1–16: 16 randomly picked colonies.
https://doi.org/10.1371/journal.pone.0241867.s004
(TIF)
S5 Fig. Construction of Cas9-mediated P. luminescens deletion mutants for genes encoding predicted non-ribosomal peptide/polyketide synthases (NRPS).
L: DNA ladder. WT: wild type as positive control. 1–16: 16 randomly picked colonies. For the gene deletion of NRPS_3, we only got total 7 kanamycin and apramycin resistant colonies from 3 different conjugation experiments.
https://doi.org/10.1371/journal.pone.0241867.s005
(TIF)
S6 Fig. Schematic diagram for the secondary accessory vector construction (not drawn to scale).
https://doi.org/10.1371/journal.pone.0241867.s006
(TIF)
S1 Table. Bacterial strains used in this study.
https://doi.org/10.1371/journal.pone.0241867.s007
(XLSX)
S2 Table. Strain selected with landing pad transposon insertion.
https://doi.org/10.1371/journal.pone.0241867.s008
(XLSX)
S3 Table. Culturing conditions for bacterial strains.
https://doi.org/10.1371/journal.pone.0241867.s009
(XLSX)
S4 Table. The sequence of the lox sites used in this study.
https://doi.org/10.1371/journal.pone.0241867.s010
(XLSX)
S6 Table. Primers and gBLOCKs used for vector construction and mutant screening.
https://doi.org/10.1371/journal.pone.0241867.s012
(XLSX)
References
- 1. Hug LA, Baker BJ, Anantharaman K, Brown CT, Probst AJ, Castelle CJ, et al. A new view of the tree of life. Nat Microbiol. 2016;1: 16048. pmid:27572647
- 2. Wexler AG, Goodman AL. An insider’s perspective: Bacteroides as a window into the microbiome. Nat Microbiol. 2017;2: 17026. pmid:28440278
- 3. Barka EA, Vatsa P, Sanchez L, Gaveau-Vaillant N, Jacquard C, Meier-Kolthoff JP, et al. Correction for Barka et al., Taxonomy, Physiology, and Natural Products of Actinobacteria. Microbiol Mol Biol Rev. 2016;80: iii. pmid:28575842
- 4. Hadjithomas M, Chen I-MA, Chu K, Huang J, Ratner A, Palaniappan K, et al. IMG-ABC: new features for bacterial secondary metabolism analysis and targeted biosynthetic gene cluster discovery in thousands of microbial genomes. Nucleic Acids Res. 2017;45: D560–D565. pmid:27903896
- 5. Zou Y, Xue W, Luo G, Deng Z, Qin P, Guo R, et al. 1,520 reference genomes from cultivated human gut bacteria enable functional microbiome analyses. Nat Biotechnol. 2019;37: 179–185. pmid:30718868
- 6. Freed E, Fenster J, Smolinski SL, Walker J, Henard CA, Gill R, et al. Building a genome engineering toolbox in nonmodel prokaryotic microbes. Biotechnol Bioeng. 2018;115: 2120–2138. pmid:29750332
- 7. Liu H, Deutschbauer AM. Rapidly moving new bacteria to model-organism status. Curr Opin Biotechnol. 2018;51: 116–122. pmid:29316481
- 8. Waller MC, Bober JR, Nair NU, Beisel CL. Toward a genetic tool development pipeline for host-associated bacteria. Curr Opin Microbiol. 2017;38: 156–164. pmid:28624690
- 9. Wang G, Zhao Z, Ke J, Engel Y, Shi Y-M, Robinson D, et al. CRAGE enables rapid activation of biosynthetic gene clusters in undomesticated bacteria. Nat Microbiol. 2019;4: 2498–2510. pmid:31611640
- 10. Adli M. The CRISPR tool kit for genome editing and beyond. Nat Commun. 2018;9: 1911. pmid:29765029
- 11. Pickar-Oliver A, Gersbach CA. The next generation of CRISPR-Cas technologies and applications. Nat Rev Mol Cell Biol. 2019;20: 490–507. pmid:31147612
- 12. Sternberg SH, Doudna JA. Expanding the Biologist’s Toolkit with CRISPR-Cas9. Mol Cell. 2015;58: 568–574. pmid:26000842
- 13. Qi LS, Larson MH, Gilbert LA, Doudna JA, Weissman JS, Arkin AP, et al. Repurposing CRISPR as an RNA-guided platform for sequence-specific control of gene expression. Cell. 2013;152: 1173–1183. pmid:23452860
- 14. Gilbert LA, Horlbeck MA, Adamson B, Villalta JE, Chen Y, Whitehead EH, et al. Genome-scale CRISPR-mediated control of gene repression and activation. Cell. 2014;159: 647–661. pmid:25307932
- 15. Dong C, Fontana J, Patel A, Carothers JM, Zalatan JG. Synthetic CRISPR-Cas gene activators for transcriptional reprogramming in bacteria. Nat Commun. 2018;9: 2489. pmid:29950558
- 16. Jiang W, Bikard D, Cox D, Zhang F, Marraffini LA. RNA-guided editing of bacterial genomes using CRISPR-Cas systems. Nat Biotechnol. 2013;31: 233–239. pmid:23360965
- 17. Vento JM, Crook N, Beisel CL. Barriers to genome editing with CRISPR in bacteria. J Ind Microbiol Biotechnol. 2019;46: 1327–1341. pmid:31165970
- 18. Pyne ME, Bruder MR, Moo-Young M, Chung DA, Chou CP. Harnessing heterologous and endogenous CRISPR-Cas machineries for efficient markerless genome editing in Clostridium. Sci Rep. 2016;6: 25666. pmid:27157668
- 19. Wendt KE, Ungerer J, Cobb RE, Zhao H, Pakrasi HB. CRISPR/Cas9 mediated targeted mutagenesis of the fast growing cyanobacterium Synechococcus elongatus UTEX 2973. Microb Cell Fact. 2016;15: 115. pmid:27339038
- 20. Cho S, Shin J, Cho B-K. Applications of crispr/cas system to bacterial metabolic engineering. Int J Mol Sci. 2018;19. pmid:29621180
- 21. Altenbuchner J. Editing of the Bacillus subtilis Genome by the CRISPR-Cas9 System. Appl Environ Microbiol. 2016;82: 5421–5427. pmid:27342565
- 22. Li Q, Chen J, Minton NP, Zhang Y, Wen Z, Liu J, et al. CRISPR-based genome editing and expression control systems in Clostridium acetobutylicum and Clostridium beijerinckii. Biotechnol J. 2016;11: 961–972. pmid:27213844
- 23. Bober JR, Beisel CL, Nair NU. Synthetic biology approaches to engineer probiotics and members of the human microbiota for biomedical applications. Annu Rev Biomed Eng. 2018;20: 277–300. pmid:29528686
- 24. Williams KP, Gillespie JJ, Sobral BWS, Nordberg EK, Snyder EE, Shallom JM, et al. Phylogeny of gammaproteobacteria. J Bacteriol. 2010;192: 2305–2314. pmid:20207755
- 25. Price MN, Wetmore KM, Waters RJ, Callaghan M, Ray J, Liu H, et al. Mutant phenotypes for thousands of bacterial genes of unknown function. Nature. 2018;557: 503–509. pmid:29769716
- 26. Hayes F. Transposon-based strategies for microbial functional genomics and proteomics. Annu Rev Genet. 2003;37: 3–29. pmid:14616054
- 27. Marx CJ, Lidstrom ME. Broad-host-range cre-lox system for antibiotic marker recycling in gram-negative bacteria. BioTechniques. 2002;33: 1062–1067. pmid:12449384
- 28. Yan X, Yu H-J, Hong Q, Li S-P. Cre/lox system and PCR-based genome engineering in Bacillus subtilis. Appl Environ Microbiol. 2008;74: 5556–5562. pmid:18641148
- 29. Sun D. Pull in and push out: mechanisms of horizontal gene transfer in bacteria. Front Microbiol. 2018;9: 2154. pmid:30237794
- 30. Lee G, Saito I. Role of nucleotide sequences of loxP spacer region in Cre-mediated recombination. Gene. 1998;216: 55–65. pmid:9714735
- 31. Araki K, Araki M, Yamamura K. Site-directed integration of the cre gene mediated by Cre recombinase using a combination of mutant lox sites. Nucleic Acids Res. 2002;30: e103. pmid:12364620
- 32. Jensen MK. Design principles for nuclease-deficient CRISPR-based transcriptional regulators. FEMS Yeast Res. 2018;18. pmid:29726937
- 33. Martin VJJ, Mohn WW. The isolation of DNA sequences flanking Tn5 transposon insertions by inverse PCR. Methods Mol Biol. 2002;192: 315–323. pmid:12494663
- 34. Pavan ME, Venero ES, Egoburo DE, Pavan EE, López NI, Julia Pettinari M. Glycerol inhibition of melanin biosynthesis in the environmental Aeromonas salmonicida 34melT. Appl Microbiol Biotechnol. 2019;103: 1865–1876. pmid:30539256
- 35. Meyer J-M, Geoffroy VA, Baida N, Gardan L, Izard D, Lemanceau P, et al. Siderophore typing, a powerful tool for the identification of fluorescent and nonfluorescent pseudomonads. Appl Environ Microbiol. 2002;68: 2745–2753. pmid:12039729
- 36. Berendsen RL, van Verk MC, Stringlis IA, Zamioudis C, Tommassen J, Pieterse CMJ, et al. Unearthing the genomes of plant-beneficial Pseudomonas model strains WCS358, WCS374 and WCS417. BMC Genomics. 2015;16: 539. pmid:26198432
- 37. Paulick A, Koerdt A, Lassak J, Huntley S, Wilms I, Narberhaus F, et al. Two different stator systems drive a single polar flagellum in Shewanella oneidensis MR-1. Mol Microbiol. 2009;71: 836–850. pmid:19170881
- 38. Guo J, Wang T, Guan C, Liu B, Luo C, Xie Z, et al. Improved sgRNA design in bacteria via genome-wide activity profiling. Nucleic Acids Res. 2018;46: 7052–7069. pmid:29982721
- 39. Aakvik T, Degnes KF, Dahlsrud R, Schmidt F, Dam R, Yu L, et al. A plasmid RK2-based broad-host-range cloning vector useful for transfer of metagenomic libraries to a variety of bacterial species. FEMS Microbiol Lett. 2009;296: 149–158. pmid:19459950
- 40. Kushwaha M, Salis HM. A portable expression resource for engineering cross-species genetic circuits and pathways. Nat Commun. 2015;6: 7832. pmid:26184393
- 41. Li H. Minimap2: pairwise alignment for nucleotide sequences. Bioinformatics. 2018;34: 3094–3100. pmid:29750242
- 42. Li H, Handsaker B, Wysoker A, Fennell T, Ruan J, Homer N, et al. The Sequence Alignment/Map format and SAMtools. Bioinformatics. 2009;25: 2078–2079. pmid:19505943