Figures
Abstract
A high degree of intraspecific variation, both genetic and in shell morphology, of the operculate land snail Cyclophorus fulguratus (Pfeiffer, 1854) suggests that its classification as a single species warrants reconsideration. We sequenced two nuclear (18S and 28S) and two mitochondrial (16S and COI) genes of 46 C. fulguratus specimens and used them to estimate the phylogeny and to determine the validity of species boundaries. Molecular phylogenetic analyses revealed the presence of three lineages corresponding to three geographically disjunctive populations of C. fulguratus in Thailand. Likelihood tests of topologies significantly supported the non-monophyly of the C. fulguratus–complex and Bayesian species delimitation analysis significantly supported the potential representation as distinct species of these three lineages. Discriminant function analysis based on geometric-morphometrics of shell shape allowed for significant distinction of these three candidate species, although they revealed a considerable degree of overlap of shell shape reflecting their crypsis morphologically. The diagnostic characters are provided by color pattern, pattern of protoconch and pattern of jaw. In conclusion, the results support that the C. fulguratus s.l., as currently recognized, consists of three distinct species in Thailand: C. fulguratus s.s., C. rangunensis and C. abditus sp.nov., which are described herein.
Citation: Nantarat N, Wade CM, Jeratthitikul E, Sutcharit C, Panha S (2014) Molecular Evidence for Cryptic Speciation in the Cyclophorus fulguratus (Pfeiffer, 1854) Species Complex (Caenogastropoda: Cyclophoridae) with Description of New Species. PLoS ONE 9(10): e109785. https://doi.org/10.1371/journal.pone.0109785
Editor: Dorothee Huchon, Tel-Aviv University, Israel
Received: March 13, 2014; Accepted: September 8, 2014; Published: October 9, 2014
Copyright: © 2014 Nantarat et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: The main funding source for this project was from The Thailand Research Fund (TRF) to SP under TRF-Senior Research Scholar Grant RTA 5580001. TRF and Chulalongkorn University also jointly supported The Royal Golden Jubilee Ph.D Program (PHD/0315/2550) to SP and NN, and the UNITAS Malacologica Student Research Awards. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Cyclophorus Monfort, 1810 is a genus of operculate land snail distributed throughout the humid or seasonally humid tropical and warm temperate habitats of South Asia and South East Asia, as well as the southern areas of China, Korea, and Japan [1]–[9]. It is one of the most diverse genera of land snails, comprising more than 100 nominal species, and is among the vaguest in terms of its taxonomy [2], [3]. Cyclophorus have been utilized for food in many parts of Thailand, Laos, and Vietnam [10]–[12], but in recent years, the number of Cyclophorus snails appears to have noticeably decreased [13]. The traditional classification of Cyclophorus is based solely on shell morphological characters such as shape and color pattern [1]–[3], [6]. However, shell characteristics can be extremely variable, especially in widely distributed species, due to convergence [14]–[18] or random genetic drift and geographic isolation [19], [20]. Some studies have investigated the anatomy of Cyclophorus [21], [22] but it is quite clear that Cyclophorus shows a high degree of anatomical similarity rendering anatomical characters unreliable for use in species discrimination [23], [24].
Cyclophorus fulguratus (Pfeiffer, 1854) is characterized by a turbinated shell that is transversely freckled with zigzag chestnut streaks, conspicuously banded below the periphery, and with a circular aperture with a white or pale orange lip [25]. It has a widespread distribution throughout Southeast Asia, including Cambodia, Laos, Myanmar, Thailand, and Vietnam [2], [3]. In Thailand, it was recorded in the western, central, eastern, and northeastern parts of the country. More recently, studies on karyotype [23], allozyme analysis [26], and molecular phylogeny [27] have revealed extensive variation within Thai C. fulguratus populations. These genetic variations, in combination with the high degree of intra-specific shell variation in C. fulguratus, would suggest that its classification as a single species warrants reconsideration [23], [26]. The current taxonomic focus on key external shell characteristics, which have been shown in several cases to be strongly influenced by environmental factors, may confound the identification of useful diagnostic characters for the recognition of biological species of Cyclophorus [16], [26], [27]. Species limits within Cyclophorus are extremely difficult to establish, with geographically disjunctive populations of C. fulguratus perhaps representative of a complex of cryptic species [27].
The taxonomic status of C. fulguratus remains confused and there is a clear need to reassess its taxonomy through the use of more effective tools. This paper aims to determine the validity of species boundaries in C. fulguratus by combining molecular phylogeny and morphological approaches. The recognition of cryptic species allows these taxa to be included in biodiversity assessments and incorporated in conservation strategies.
Material and Methods
Taxon sampling and morphological study
One hundred and fifty-five C. fulguratus, including live and shell-only specimens, were collected from 34 localities throughout its distribution range in Thailand. The identification of specimens was primarily based on publications of Pfeiffer (1854) [25], and Kobelt (1902, 1908) [2], [3]. All specimens were then subsequently compared with the relevant type specimens from the Natural History Museum, London (NHMUK) [28]. As the adult specimens exhibit an expanded and reflexed apertural lip they are easy to distinguish. Foot tissue were fixed and preserved in 95% ethanol for molecular study. The remaining parts were preserved in 70% ethanol for anatomical study. All of the voucher specimens were kept at the Chulalongkorn University Museum of Zoology (CUMZ), Bangkok, Thailand (voucher numbers are given in Table 1).
For details of shell surface, protoconch, jaw and radula morphology, the samples were coated with gold metal and examined in a scanning electron microscopy (SEM, JSM-5410 LV) at the Scientific and Technological Research Equipment Centre (STREC), Chulalongkorn University.
Molecular phylogeny
For molecular analysis, the 46 live specimens of C. fulguratus from 23 localities, including the voucher specimens from previous studies of Kongim et al. (2006) [23], Prasankok et al. (2009) [26], and Nantarat et al. (2014) [27], were used (Fig. 1,Table 1). Nineteen congeners of the genus Cyclophorus found in Thailand were also included. Leptopoma vitrium was used as the outgroup.
(A) Location of Cyclophorus fulguratus species complex sampling sites in Thailand. The numbered sample sites are detailed in Table 1. (B) Maximum-likelihood phylogenetic tree of the Cyclophorus fulguratus species complex and related species constructed using 2146 nucleotide sites of the concatenated 18S, 28S, 16S and COI genes. Bootstrap support values (when>65%) and posterior probabilities for individual nodes are shown on the tree (based on NJ/ML/BI methods).
Genomic DNA was extracted from foot tissues by using a DNAeasy Tissue Kit (QIAGEN Inc.). Sequence data was obtained for the nuclear 18S rRNA (18S; approximately 440 bp, positions 1391-1845 of the complete 18S rRNA gene of ‘Biomphalaria glabrata’ GB accession number U65223) and 28S rRNA (28S; approximately 590 bp, position 213-853 of the partial 28S rRNA gene of ‘Architectonica perspectiva’ GB accession number FJ917231.1) as well as the mitochondrial 16S rRNA (16S; approximately 518 bp, positions 672-1198 of the complete 16S rRNA gene of ‘Oncomelania hupensis’ GB accession number NC_013073.1) and cytochrome c oxidase I (COI; 660 bp, positions 37-696 of the complete COI gene of ‘Oncomelania hupensis’ GB accession number NC_013073.1) gene fragments.
For each gene fragment, amplification was attempted with a single pair of primers as in Table 2. PCR reactions were undertaken in a 50 µl final volume using 25 µl of 2xIllustra hot start master mix (GE Healthcare), 10 µM of each primer and about 10 ng of DNA template. The 18S, 28S, and 16S PCR reaction cycles were as follows: 2 min at 94°C, subsequently 36 cycles of 30 sec at 94°C, 30 sec at 50°C, and 90 sec at 72°C, and then a final extension step of 5 min at 72°C. For COI, PCR reaction cycles were 2 min at 94°C, subsequently 36 cycles of 30 sec at 94°C, 2 min at 42°C, and 2 min at 72°C, and then a final extension step of 5 min at 72°C. The PCR products were purified with a QIAquick PCR purification Kit (QIAGEN Inc.) and sequences were sent for cycle-sequencing at Macrogen, Inc.
Sequences were initially aligned in MUSCLE version 3.6 [29], with manual adjustments made in MEGA 5.0 [30]. Ambiguously aligned nucleotide positions were identified manually and excluded from sequence analyses [31]. All gaps were likewise excluded. All base frequencies, pairwise (uncorrected-p) sequence distances for all gene fragments and molecular character statistics were calculated using MEGA 5.0 [30]. Heterogeneity in base composition between sequences was tested by examining the variation in base pair composition among sequences for all datasets using a χ2 analysis, as implemented in PAUP* v4.0b10 [32].
Neighbor-joining (NJ), maximum likelihood (ML), and Bayesian inference (BI) were performed using the following datasets: 18S, 28S, 16S, COI, and concatenated 18S, 28S, 16S and COI. The concatenated dataset (Material S1) was assessed for conflict between the character partitions using the partition homogeneity test in PAUP 4.0b10, using 100 replicates [32], [33]. The data were partitioned by gene fragment with the evolutionary substitution model specified for each partition separately. jModeltest 0.1.1 [34] was used to calculate the best evolutionary substitution model under Akaike Information Criterion; AIC [35].
NJ analysis was undertaken using PAUP* v4.0b10 [32] based on appropriate models (18S, HKY+I+G; 28S, HKY; 16S, GTR; COI, GTR+I+G; concatenated dataset, GTR+G). Bootstrap resampling [36] with 1000 replicates was undertaken to assign support to branches in the NJ tree. For ML and BI analyses, single gene analyses were undertaken using the following models: 18S, HKY+I+G; 28S, HKY; 16S, GTR; COI, GTR+I+G. For the concatenated dataset a partitioned analysis was performed. ML analyses was performed using RAxML v7.2.6 [37], with randomized stepwise addition parsimony trees (number seed = 5), and with 1000 bootstrap replicates [36] via the rapid bootstrap procedure of Stamatakis et al. (2008) [38]. BI analysis was performed using MrBayes version 3.1.2 [39], where the tree space was explored using four chains for each run of a Markov chain Monte Carlo algorithm (MCMC) and the optimum substitution model suggested by jModeltest [34]. The BI analysis was run for 10,000,000 generations (heating parameter = 0.03), sampled every 100 generations, and the last 10,000 of trees were used for calculation of posterior probabilities on the Bayesian inference tree (burnin = 90,001samples). Convergence was monitored by proving the average standard deviation of the split frequencies (between 2 runs) were below 0.01 [39].
Alternative phylogenetic hypotheses of the polyphyly of C. fulguratus were assessed using a Shimodaira and Hasegawa test (SH-test) [40] and an Approximately Unbiased test (AU-test) [41]. The SH and AU tests were implemented in the program CONSEL version 0.1i [42] with 10,000 bootstrap replicates. The SH and AU tests were used to compare likelihood scores of constraint trees in which C. fulguratus–complex monophyly was enforced against the tree inferred by the ML method. The constraint topologies and site-likelihood scores were calculated in RAxML with the –g constraint option using the best scoring tree for the topology tests. The trees were estimated from 300 ML searches starting from random tree topologies. Constraints tested were: (i) monophyly of Clade A, B and C (ii) monophyly of Clade A and B, (iii) monophyly of clade A and C, and (iv) monophyly of Clade B and C.
In addition, the validity of the three clades (Fig. 1; see results) was also determined by using a Bayesian species-delimitation approach (BSD), as implemented in the program Bayesian Phylogenetics and Phylogeography (BP&P) version 2.2 [43]. A total of 46 samples of C. fulguratus s.l. were included. BSD is based on the reversible-jump Markov Chain Monte Carlo (rjMCMC) algorithm in combination with a user-specified guide tree. The tree topology from a species tree based on concatenated sequences of 18S, 28S, 16S and COI genes generated from *BEAST [44], part of the BEAST v1.6.1 package [45], was used as a guide tree. The species trees (Fig. 2) were calculated for the C. fulguratus–complex using the same models as used in the ML and BI methods. Analyses were run with unlinked substitution model and clock model parameters (using same settings as for gene tree analyses). The Yule process was performed as the species tree prior. The two independent runs with a MCMC chain length of 1×107 each were conducted, sampling every 1000 generations. Convergence and effective sample sizes (ESS) were assessed with Tracer v1.5 [46] before building a consensus tree with 10% of burn-in. We used algorithm 0 with the fine-tuning parameter e = 5 to adjust the rjMCMC and ran 1×106 generations with a sampling every 100 and a burn-in of 10%. The 95% of speciation probability value is considered as strong support for a speciation event [47]. Three different combinations of ancestral population size (θ) and root divergence time (τ) as suggested by Ahmadzadeh et al. 2013 [48] were evaluated: (A) relatively large ancestral population size and shallow divergences, θ = G(θ 2,10), τ = G(θ 2,2000); (B) relatively large ancestral population size and deep divergences, θ = G(θ 2,10), τ = G(θ 2,10); and (C) relatively small ancestral population size and shallow divergences θ = G(θ 2,2000), τ = G(θ 2,2000). For ensuring stability, we ran each analysis three times with proper mixing and convergence across runs as discussed above.
Black nodes show 95% speciation probability support values in Bayesian species delimitation; Gray nodes are not supported in over 95% by Bayesian species delimitation. Posterior probability for supported branches generated by *BEAST are shown above the branches and speciation probabilities of a Bayesian species delimitation are provided in box for each node under each combination of priors: A, relatively large ancestral population size and shallow divergences; B, relatively large ancestral population size and deep divergences; and C, relatively small ancestral population size and shallow divergences. The 95% of speciation probability value is considered as strong support for a speciation event and is shown for each node.
Shell geometric morphometric analysis
For geometric morphological study, 155 shells, including the shell-only collections as well as the individuals for which we gathered DNA sequence data, were examined. Shell photos were taken with a tripod-mounted Nikon D90 digital camera using consistent capture conditions for all specimens. The photos were randomly ordered in tpsUtil v.1.49 [49], before bi-dimensional coordination of thirteen landmarks shown as Fig. 3A were digitized by the same person in the program tpsDig2 v.2.16 [50].
(A) Shell photo showing measurements and landmarks (black circles) used in this study. (B) Plots of individual scores for the two canonical variates (CVs) derived from canonical variate analysis (CVA). Black circles represent individuals for Clade A, white circles for Clade B and grey circles for Clade C. (C) Wireframes showing the shape deformations (solid line) from the consensus configuration (dotted line) to each extreme negative and positive CVs. Shape changes along CV1 are shown on the left and CV2 on the right.
Geometric morphometrics analyses were carried out using the software package MORPHOJ v1.05c [51]. Landmark data were first superimposed by Procrustes transformation into a common coordinate system to eliminate other variation (i.e. isometric size variation and orientation) except shape from the data [52]. The allometric components or the effect of allometric shape variation were removed. Shell shapes as the independent variation were plotted against centroid size as the independent variation. Multivariate regression revealed a statistically significant correlation between the centroid size and shape variable (p<0.001; 10,000 replicates of permutation test), and accounted for 5.58% of total variation. Therefore, to remove this allometric component, a new data set that contained the residual was used in subsequent analyses.
Shell shape variation was then examined using canonical variance analysis (CVA) with candidate species recognized by molecular analyses as a prior group. Mahalanobis distances and Procrustes distances between pairwise groups were assessed for significant differences by the permutation test (10 000 iterations). The percentage of correct classification of a paired species was assessed by leave-one-out cross-validation as the implement of discriminant function analysis.
Ethical considerations
All animal work was conducted according to relevant national and international guidelines. No specific permissions are required to work with invertebrates in Thailand. Similarly, for the majority of collection sites, no specific permissions were required for the collection of snails, because they were not collected from protected areas of land. Where specimens were collected from national parks, collections were undertaken in cooperation with the Plant Genetic Conservation Project initiated by Her Royal Highness Princess Maha Chakri Sirindhorn and the Ministry of Natural Resources and Environment (MNRE) (permit number for 2553-2555). The land snail, C. fulguratus, is not an endangered or protected species.
Nomenclatural acts
The electronic edition of this article conforms to the requirements of the amended International Code of Zoological Nomenclature, and hence the new names contained herein are available under that Code from the electronic edition of this article. This published work and the nomenclatural acts it contains have been registered in ZooBank, the online registration system for the ICZN. The ZooBank LSIDs (Life Science Identifiers) can be resolved and the associated information viewed through any standard web browser by appending the LSID to the prefix “http://zoobank.org/”. The LSID for this publication is: urn:lsid:zoobank.org:pub: F8E64879-4502-48DB-9B4C-10EE87B58C87.
Results
DNA sequence variation
A total of 46 samples from 23 populations of C. fulguratus throughout Thailand were sequenced. The aligned matrices include two nuclear gene fragments, 18S (431 bp) and 28S (585 bp), and two mitochondrial gene fragments, 16S (470 bp) and COI (660 bp). Variable/parsimony-informative characters are: 150/100 (18S); 52/31 (28S); 150/117 (16S); and 273/239 (COI).
The concatenated dataset included a total of 2146 aligned characters. The dataset had 46.2% GC content [range 41.09% GC to 46.61% GC, χ2 test = 27.148126 d.f. = 153, P = 1.000], with 754 parsimony informative and 791 variable sites. The results of a partition homogeneity test by PAUP 4.0b10, using 100 replicates [32] showed no significant differences in the sequences were found between markers (P = 0.096). The uncorrected p-distance between the taxa ranged from 0.121 to 0.144 (inter/intraspecific p-distances = 0.067 and 0.007, respectively).
Molecular phylogeny
The phylogenetic tree based on the concatenated data set of all genes (Fig. 1B) showing the evolutionary relationships among populations of the C. fulguratus–complex and their position among congeners resulted in topologies with all branches supported with>65% of NJ/ML bootstraps and>0.83 of BI posterior probabilities. The inferred topologies strongly support the polyphyly of the C. fulguratus–complex, with this finding consistent for all genes and across all tree methods. The C. fulguratus–complex is separated into three clearly defined clades that correspond well to biogeographic regions (Fig. 1). The three clades consisted of Clade A, the Eastern population with 100% NJ and 100% ML bootstrap support and a Bayesian posterior probability of P = 1.00; Clade B, the Northeastern population with 93% NJ and 75% ML bootstrap support and P = 0.90 (BI); and Clade C, the Central-West population with 100% NJ and 100% ML bootstrap support and P = 1.00 (BI). Clade A was placed closely to C. coubeti, C. haughtoni, and C. labiosus in the phylogenetic tree, while Clade B was clustered with C. consociatus, and Clade C appeared as a sister group with C. amoenus and C. subfloridus (Fig. 1B).
Both SH and AU tests significantly reject the monophyly of the C. fulguratus–complex in all of the analyzed datasets (18S, 28S, 16S, COI, concatenated 18S and 28S, concatenated 16S and COI, and concatenated 18S, 28S, 16S and COI) at p<0.01 [monophyletic C. fulguratus (all clades) against inferred tree]. Constraint trees in which the monophyly of paired clades were tested were also significantly rejected in all analyzed datasets at p<0.01 [(i) monophyly of Clade A and B against inferred tree, (ii) monophyly of clade A and C against inferred tree, and (iii) monophyly of Clade B and C against inferred tree].
Bayesian species delimitation strongly supports three species within the C. fulguratus –complex (Clade A, B, C; Fig.2). These were consistently recovered in the posterior distribution by every species delimitation model (speciation probability = 1) under every prior combination (all effective sample sizes, parameters above 200). Clade B was further divided into two subclades, which are distributed in the northern (Upper) and southern (Lower) parts of the northeastern range. However, these were not significantly delimited as distinct species in Bayesian species delimitation analysis (prior A, speciation probability = 0.616; prior B, 0.628; and prior C, 0.913).
The distance for the 18S, 28S, 16S and COI gene fragments between all Cyclophorus species included in this analysis (excluding outgroup; Table 3) and between the three C. fulguratus clades (Tables 4–5) also supported the presence of three clades of C. fulguratus.
Geometric morphometric analysis
Canonical variance analysis (CVA) with the three clades of the C. fulguratus–complex given as a prior group provided a graphic display of the shape differences between them by the relation between two CV variables obtained (Fig. 3B). The first canonical axis (CV1) explained 66.64% (Eigenvalues = 0.6858) of the shape variability, while the second canonical axis (CV2) accounted for 33.36% (Eigenvalues = 0.3432). Overall, individuals from each clade were clustered with a considerable overlap with other clades. When testing for differences among clades, however, the results showed significant differences among them based on permutation tests for Mahalanobis distances and Procrustes distances (P<0.0001; to 0.0013: Table 6). The percentage of correct classification of specimens according to cross-validation of discriminant function analysis was 66% for Clade A; 79% for Clade B; and 65% for Clade C. The overall rate of reliability in the identification of specimens was 70%.
Wireframe modification in Figure 3C described the shape change from the consensus configuration along the two CVs. For CV1, individuals located in the positive portion of the axis had a wider shell when compared to individuals located in the negative portion. This shape change was principally represented by a shift of landmark 8 and 11. The CV2 showed differences in relation to the aperture of the snails. Individuals placed in the positive portion of the axis had a narrower aperture width when compared to the negative portion. Shape deformations along CV2 were markedly described by landmark 10 and 13 moving from the center of the aperture with respect to other landmarks as the score decreased.
Morphological data
Most of the C. fulguratus–complex specimens examined in the present study showed a high similarity of shell shape, shell size, and reproductive morphology. However, we found that the three clades can be distinguished from each other by qualitative characters as follows: color pattern, pattern of protoconch and pattern of jaw (Figs. 4, 5).
(A, B) Cyclophorus fulguratus s.s. (A) Lectotype NHMUK 20130117/1, and (B) specimen CUMZ 1327 from Khao Chakan, Sra Kaeo (Clade A; Fig. 1B). (C, D) Cyclophorus rangunensis (C) Lectotype NHMUK 20130091/1, and (D) specimen CUMZ 1781 from Thepmuangthong Temple, Uthaithani (Clade C; Fig. 1B). (E, F) Cyclophorus abditus sp.nov. (E) holotype CUMZ 1828/1, and (F) paratype CUMZ 1828 from the type locality (Clade B; Fig. 1B).
(A–C) Cyclophorus fulguratus s.s. specimen CUMZ 1327 from Khao Chakan, Sra Kaeo (Clade A; Fig. 1B). (D–F) Cyclophorus rangunensis specimen CUMZ 1781 from Thepmuangthong Temple, Uthaithani (Clade C; Fig. 1B). (G–I) Cyclophorus abditus sp. nov. paratype CUMZ 1828 from the type locality (Clade B; Fig. 1B).
Discussion
Molecular phylogeny
We have undertaken a detailed evaluation of species boundaries within the C. fulguratus– complex and examined its relationships with other congeners in the genus Cyclophorus. Our study included representative of 13 populations from previous studies [23], [26], [27] and 10 new additional populations. In general, the phylogenetic trees generated from analyses of individual genes (Figs. S1–S4) and from the concatenated datasets were congruent with all supporting the non-monophyly of the C. fulguratus–complex and the presence of three highly divergent C. fulguratus–complex clades: Clade A, the Eastern population; Clade B, the Northeastern population; and Clade C, the Central-West population. Some analyses also suggested the further division of Clade B into Upper and Lower Northeastern groups (separated by the congener C. consociatus) but this was not supported with all genes (Table S1).
Two lineages (Clade B, northeastern populations and Clade C, central-west populations; Fig. 1) were previously identified from karyotypic analysis [23], where it was suggested that C. fulguratus may represent two species, or one species undergoing speciation. A different karyotypic pattern was revealed with 12 m+2sm for central-west populations (Clade C in the present study) and 13 m+1sm for northeastern populations (Clade B in the present study). Later, the divergence of C. fulguratus into three lineages was supported by allozyme analysis based on 13 presumed allozyme loci of 10 enzyme systems [26]. The study suggested that the central, northeastern and eastern populations of C. fulguratus (Clade A, B, and C in the present study) have fixed or nearly fixed allelic differences at several allozyme loci. They observed relatively large divergences among these three regions and proposed an absence of gene flow between them. Moreover, a recent molecular phylogenetic study of the genus Cyclophorus based on COI, 16S rRNA, and 28S rRNA genes separated the C. fulguratus– complex into four groups: central (Clade C), eastern (Clade A), upper northeastern, and lower northeastern groups, with C. consociatus falling in between upper and lower northeastern groups [27]. Phylogenetic analysis in the present study did not resolve the Upper and Lower northeastern groups as two separate units (Clade B). Furthermore, the separation of Upper and Lower northeastern groups was not significantly supported in Bayesian species delimitation analysis. These findings suggest that the Upper and Lower Northeastern groups should be considered as a single evolutionary unit, though we note that our sampling of the Lower Northeastern group is at presented limited.
Cryptic species within C. fulguratus
Although genetic and geometric-morphometrics of shell shape allowed for significant distinction of these three groups, there was a considerable degree of overlap of shell shape between groups. The genital system of this snail also shows high similarity [23], [24] and cannot be used to discriminate. Populations of the present species that are discontinuously distributed may be subject to reduced gene flow or a complete lack of genetic exchange. Over time, these populations may have allopatrically diverged into different species (Clades A, B and C) with little differentiation in shell morphology [53]. Alternatively, under similar selective pressure, their shell characters may have undergone convergent evolution [54].
These characters support the three clades as follows: (i) color pattern: scatter spot around shell in Clade C versus mostly chestnut brown shell in Clade B, and streaks and zigzags around the shell in the Eastern group (Clade A); (ii) pattern of protoconch: wide miniature line radial lamellae throughout the first 2 whorls of protoconch in Clade C versus miniature narrow radial lamellae throughout the first 2½ whorls of protoconch in Clade B and miniature narrow radial lamellae throughout the first 1½ whorl and then wide radial lamellae of the protoconch in Clade C; while (iii) pattern of jaw: round horizontal lines between block of jaw in Clade C, small groove running in the middle of horizontal line of jaw in Clade B and flat horizontal lines and shallow groove between blocks of jaw in Clade C.
The multiple lines of evidence presented in this study strongly suggest that the three geographical populations of the C. fulguratus–complex in Thailand should be recognized as three distinct species. Two of these are described species, C. fulguratus s.s. (Clade A) and C. rangunensis (Clade C), but the third (Clade B) is as yet undescribed and is described hereafter as C. abditus sp. nov.
Systematic description
Family Cyclophoridae Gray, 1847
Genus Cyclophorus Montfort, 1810
Cyclophorus fulguratus (Pfeiffer, 1854)
Cyclostoma (Cyclophorus) fulguratum Pfeiffer, 1854 [1852: 63]. Type locality: unknown [25]. Pfeiffer, 1854: 345, pl.45, fig. 9, 10 [55].
Cyclophorus fulguratus—Reeve, 1861: sp. 35 [6]. Kobelt, 1902: 112 [2]. Hanley and Theobald, 1876: 57, pl. 144, fig. 1 [56]. Kongim et al., 2006: 1-8 (in part) [23]. Prasankok et al., 2009: 900-906 (in part) [26]. Nantarat et al., 2014: 11, fig. 8a, b [28]
Material examined.
Lectotype NHMUK 20130117/1 (Fig. 4A) and paralectotypes NHMUK 20130117/2-3 (2 shells) [28]. Plieu National Park, Chanthaburi: CUMZ 822 (3 shells), 863 (2 shells), 1180 (8 shells). Makok Waterfall, Chanthaburi: CUMZ 1135 (10 shell). Khao Soi Dao Waterfall, Chanthaburi: CUMZ 1076 (6 shells). Khao Sukim Temple, Chanthaburi: CUMZ 1224 (2 shells). Khao Chakan, Sra Kaeo: CUMZ 1327 (20 shells; Fig. 3B). Khao Maka Cave, Sra Kaeo: CUMZ 1688 (13 shells), 1788 (3 shells), 1821 (3 shells). Sapanhin Waterfall, Trat: CUMZ 1614 (6 shells).
Measurements.
Shell height: ranges 24.7–30.6 mm and average 27.7±0.16 mm. Shell width: ranges 28.2-34.0 and average 31.1±0.16 mm.
Description.
Shell medium, solid and globose turbinated. Spire elevated, apex acute; whorls 5 to 6 and convex; suture deep and wide. Periostracum thick to thin brownish corneous. Protoconch surface with thin distant transverse ridges (Fig. 5A). Following whorls with only irregular growth line. Last whorl rounded, and enlarge with white colour. Shell colour elegantly painted with angulated zigzag dark brown streaks on upper shell surface; on periphery with dark spiral band; lower periphery with striated stripe surrounded umbilicus. Aperture circular, slightly oblique; lip expanded and reflected with white to pale orange colour. Umbilicus rimate, wide and deep. Operculum corneous, multi-spiral and little concaved center (Fig. 4B)
Radula and jaw.
Taenioglossan radula, each row contains 7 teeth with formula 2-1-1-1-2. Central tooth with well develop central cusp and two smaller lateral cusps on each side; central cusp largest with pointed tip; four lateral cusps on both sides perform triangular shape with pointed head. Lateral teeth consisted 2 cusps; outer cusp large, convex shape, and flanked with smaller inner lateral cusps. Inner marginal teeth composed of 3 cusps; central cusp large and convex head, and flanked with smaller and pointed head of one inner and one outer lateral cusps. Outer marginal teeth consisted 2 cusps; outer cusp large triangular shape with convex head, and flanked with smaller inner cusp with pointed head (Fig. 5B).
Jaw consists of two parts, each part thin and rhomboid shape. Sculpture with thin longitudinal parallel ridges, connected to each other with strong parallel slanting transverse ridges, which made sculpture of jaw like underside of leaf blade or block (Fig. 5C).
Distribution.
The ranges of this species is demarcated to several localities in eastern Thailand, and probably in Cambodia and southern of Vietnam (Schileyko, 2011).
Cyclophorus rangunensis Kobelt, 1908
Cyclophorus fulguratus var. Pfeiffer, 1869: 440, pl. 98, figs 1, 2. Type locality: Thyet-Mio et Rangoon in Burma, Pegu [57]. [Thayet District in Magway Region, Yangon and Bago, Myanmar].
Cyclophorus (Glossostylus) fulguratus var. rangunensis Kobelt, 1908: 647, pl. 93, figs 1, 2 [2].
Cyclophorus fulguratus rangunensis — Gude, 1921: 61 [1]. Nantarat et al., 2014: 21, fig. 17a, b [28].
Cyclophorus fulguratus— Kongim et al., 2006: 1-8 (in part) [23]. Prasankok et al., 2009: 900-906 (in part) [26].
Material examined.
Lectotype NHMUK 20130091/1(Fig. 4C) and paralectotypes NHMUK 20130091/2-3 (2 shells) [28]. Thepsatit Temple, Nakhon Sawan: CUMZ 809 (20 shells). Khao Noh, Nakhon Sawan: CUMZ 1064 (5 shells), 1065 (4 shells). Pha Subin, Nakhon Sawan: CUMZ 1164 (5 shells). Klong Lan Waterfall, Kampaengphet: CUMZ 1602 (3 shells). Thepsathaporn Temple, Uthaithani: CUMZ 853 (3 shells), CUMZ 1232 (18 shells). Thepmuangthong Temple, Uthaithani: CUMZ 1781 (4 shells; Fig. 3D). Khao Nang Rum, Uthaithani: CUMZ 1061 (3 shells), 1062 (2 shells), 1063 (2 shells). Ramkamhaeng National Park, Sukhothai: CUMZ 839 (3 shells), 1188 (4 shells), 1189 (20 shells). Srisatchanarai Historical Park, Sukhothai: CUMZ 1201 (3 shells), 1427 (5 shells), 1430 (2 shells), 1476 (14 shells). Doi Haumod Mountain, Um-pang, Tak: CUMZ 1747 (8 shells). Bhumibol Dam, Sam Ngao, Tak: CUMZ 859 (5 shells), CUMZ 1176 (10 shells). Khao Bin Cave, Ratchaburi: CUMZ 1376 (3 shells). Tam Sue Temple, U-thong, Suphanburi: CUMZ 1401 (2 shells).
Measurements.
Shell height: ranges 22.9–34.6 mm and average 28.9±0.33 mm. Shell width, ranges 26.4–38.4 and average 33.6±0.37 mm.
Description.
Shell medium, solid and globose turbinated. Spire little depressed, apex acute; whorls 5 to 6, convex; suture wide and deep. Periostracum thick to thin brownish corneous. Protoconch with thin discernible transverse ridges (Fig. 5D). Following whorls with only irregular growth line. Last whorl rounded, enlarge and with white colour. Shell colour with fine brownish spiral lines and angulated brownish zigzag streaks like scatter spots on upper shell surface; on periphery with narrow dark spiral band; below periphery with pale brown broad spiral stripe surrounded umbilicus. Aperture circular, slightly oblique; lip expanded and reflected with white to pale orange colour. Umbilicus open and deep. Operculum corneous, multi-spiral and little concaved center (Fig. 4D)
Radula and jaw.
Teeth shape and jaw sculpture are similar to that of C. fulguratus, only minor variation occur. Lateral and marginal teeth having pointed cusp (Fig. 5E), and jaw with strong longitudinal parallel ridges and parallel slanting transverse ridges (Fig. 5F).
Distribution.
We have examined the specimens mentioned under the name C. fulguratus s.l. in Gude (1921: 62), which they show similar colour pattern to this species. Therefore, the distribution range of this species is from several localities in Burma (Kobelt, 1902; Gude, 1921), and included western to central of Thailand.
Remark.
This species differ from C. fulguratus s.s in having chestnut brown streaks like scatter spots, relatively larger shell size, and the sculpture of jaw with deep grooves between blocks and horizontal line round.
Cyclophorus abditus Nantarat and Panha, sp. nov. urn:lsid:zoobank.org:act:EF38E373-EBBB-40D0-9B90-CAB760AB21E7
Cyclophorus fulguratus —Kongim et al., 2006: 1-8 (part) [23]. Prasankok et al., 2009: 900-906 (part) [26].
Type materials.
Holotype CUMZ 1828/1 (Fig. 4E; height 25.5 mm, width 29.8 mm, 5 whorls). Paratypes CUMZ 1828 (14 shells, Fig. 4F), 848 (2 shells), 849 (3 shells), 1165 (20 shells).
Type locality.
Phu Kum Khao (Sirindhorn Museum), Sahat Sakhan, Kalasin ( = locality no. 28 in Table 1; 103° 31′ 25.72″ E, 16° 41′ 44.67″ N; elevation 224 MSL), the sand stone mountains with the dry dipterocarp forest.
Etymology.
The specific epithet is from the Latin word “abditus” meaning “hidden or concealed”. It refers to this mysterious new species has long been cryptic in the C. fulguratus. Description of this new species is here attributed to the first and the last author, Nantarat and Panha, respectively.
Other material examined.
Nawa, Nakhon Phanom: CUMZ 812 (5 shells), 1158 (2 shells), 1399 (29 shells). Numphung Dam, Sakon Nakhon: CUMZ 851 (2 shells), 1145 (11 shells). Lumpahung, Sakon Nakhon: CUMZ 1750 (20 shells). Nanghong cave, Sakon Nakhon: CUMZ 1690 (12 shells). Waritchaphum, Sakon Nakhon: CUMZ 1838 (19 shells). Nam-un Dam, Sakon Nakhon: CUMZ 1839 (9 shells). Namlad, Sakon Nakhon: CUMZ 1840 (11 shells). Ban Dong Kum Pho, Sakon Nakhon: CUMZ 847 (1 shell), 1005 (3 shell). Phu Phan Cave, Sakon Nakhon: CUMZ 1609 (3 shells). Phu Pha Man, Nongbua Lamphu: CUMZ 1171 (3 shells). Tam Numthip Temple, Roi-et: CUMZ 1826 (3 shells). Road No. 212 from Nakhon Phanom to Dong Luang, Mukdahan: CUMZ 1841 (3 shells). Phu Khiao, Chaiyaphum: CUMZ 1254 (3 shells). Kang Lumduan Waterfall, Ubonratchathani: CUMZ 1827 (3 shells).
Measurements.
Shell height: ranges 21.8–27.7 mm and average 24.6±0.16 mm. Shell width, ranges 25.8–32.0 and average 29.3±0.15 mm.
Diagnosis.
This new species can be distinguished from C. fulguratus s.s. and C. rangunensis by having relatively smaller shell, uniform brown to brownish shell colour, protoconch with dense radial ridges, and lip little expanded. While, C. fulguratus performs relatively larger shell, with dark brown zigzag streaks and broader peripheral band. In addition, C. rangunensis exhibits brownish spiral lines and scatter spots on upper shell surface, and thicken expanded lip.
Description.
Shell medium, solid and globose turbinated. Spire little depressed, apex acute; whorls 5 to 6, convex; suture deep and wide. Periostracum thick brownish corneous. Protoconch with thin closely discernible transverse ridges (Fig. 5G). Following whorls with only irregular growth line. Last whorl rounded, enlarge and with white colour. Shell colour usually with uniform brown to brownish colour, sometime dark zigzag streak present on spire; on periphery with narrow dark spiral band; lower periphery with narrow striated stripe surrounded umbilicus. Aperture circular, slightly oblique; lip little expanded and reflected with white colour. Umbilicus widely open and deep. Operculum corneous, multi-spiral and little concaved center (Fig. 4E, F)
Conclusions
Cyclophorus fulguratus s.l. is a highly variable species group that many malacologists [2], [3], [58]-[60] have suggested warrants taxonomic revision. Our findings have demonstrated that the current taxonomy of C. fulguratus s.l. is indeed inaccurate. Using multiple approaches, including molecular phylogeny, statistical tests of alternative hypotheses, Bayesian species delimitation, geometric morphometrics, and morphological data, we demonstrate that the species complex comprises three cryptic species, C. fulguratus s.s., C. rangunensis, and C. abditus sp.nov. in Thailand. Allopatric speciation may play an important role here, with mountain ranges and isolation by distance likely to be the main mechanisms driving the population structure of this snail. This study helps to clarify species limits in a genetically fragmented group and provides a framework for identifying and defining the cryptic lineage diversity of land snails. In the present day, fragmented habitats, fragile ecosystems, pollution, climate change and improper harvesting can cause decreasing population sizes [27]. Our species revisions will prove informative for informing conservation policies of these edible snails and protecting their habitat in Thailand.
Supporting Information
Figure S1.
Maximum-likelihood phylogenetic tree of the Cyclophorus fulguratus species complex and related species constructed using the 18S gene (431 bp).
https://doi.org/10.1371/journal.pone.0109785.s001
(TIF)
Figure S2.
Maximum-likelihood phylogenetic tree of the Cyclophorus fulguratus species complex and related species constructed using the 28S gene (585 bp).
https://doi.org/10.1371/journal.pone.0109785.s002
(TIF)
Figure S3.
Maximum-likelihood phylogenetic tree of the Cyclophorus fulguratus species complex and related species constructed using the 16S gene (470 bp).
https://doi.org/10.1371/journal.pone.0109785.s003
(TIF)
Figure S4.
Maximum-likelihood phylogenetic tree of the Cyclophorus fulguratus species complex and related species constructed using the COI gene (660 bp).
https://doi.org/10.1371/journal.pone.0109785.s004
(TIF)
Table S1.
Tree topologies of Clade B for each dataset.
https://doi.org/10.1371/journal.pone.0109785.s005
(DOC)
Acknowledgments
We thank members of the Animal Systematics Research Unit, Chulalongkorn University for assistance in collecting samples. We further extend our thanks to J. D. Ablett (NHMUK) for invaluable help with type specimens investigation.
Author Contributions
Conceived and designed the experiments: NN CMW CS SP. Performed the experiments: NN CMW CS SP. Analyzed the data: NN CMW EJ CS SP. Contributed reagents/materials/analysis tools: NN CMW EJ CS SP. Wrote the paper: NN CMW EJ CS SP. Specimens collecting, identification, molecular works (DNA extract, PCR) and manuscript preparation: NN. Morphological and molecular analysis: NN. Taxonomy, morphological and ecological discussion: SP.
References
- 1.
Gude GK (1921) Mollusca III (Land Operculates). In: Shipley A, Marshall A, editors. The Fauna of British India including Ceylon and Burma. Taylor and Francis, London, 386 pp.
- 2. Kobelt W (1902) Cyclophoridae. Das Tierreich 16: 1–662.
- 3.
Kobelt W (1907–1908) Die gedeckelten Lungenschnecken (Cyclostomacea). In: Abbildungen nach der Natur mit Beschreibungen. Dritte Abteilung. Cyclophoridae I. Systematisches Conchylien-Cabinet von Martini und Chemnitz 1 (19) [3]: 401–711, pls 51-103.
- 4. Minato H, Habe T (1982) Land shell fauna of Ujigunto, Kusakakigunto I. Venus. 41: 124–140.
- 5. Pilsbry HA (1926) Review of the land mollusca of Korea. Proceedings of the Academy of Natural Sciences of Philadelphia 78: 453–475.
- 6.
Reeve L (1861) Conchologia Iconica: Illustrations of the shells of molluscous animals. Volume 13, Monograph of the genus Cyclophorus, pls 1-20; Lovell Reeve & Co., London.
- 7. Van Benthem Jutting WSS (1948) Systematic studies on the non-marine mollusca of the Indo-Australian Archipelago. Treubia 19: 539–604.
- 8. Van Benthem Jutting WSS (1949) On a collection of non-marine Mollusca from Malaya in the Raffles Museum, Singapore, with an appendix on cave shells. Bulletin of the Raffles Museum, Singapore 19: 50–77.
- 9. Solem A (1959) Zoogeography of the land and fresh-water mollusca of the New Hebrides. Fieldiana Zoology 43: 243–333.
- 10.
Oakley KP (1966) Frameworks for Dating Fossil Man: Weidenfeld and Nicolson.
- 11.
Paz V, Solheim WG (2004) Southeast Asian Archaeology: Wilhelm G. Solheim II Festschrift: University of the Philippines Press.
- 12. Rabett R, Appleby J, Blyth A, Farr L, Gallou A, et al. (2011) Inland shell midden site-formation: Investigation into a late Pleistocene to early Holocene midden from Tràng An, Northern Vietnam. Quaternary International 239: 153–169.
- 13.
Corporation MC (2001) Endangered Wildlife and Plants of the World: Marshall Cavendish Corporation.
- 14. Chiba S (2004) Ecological and morphological patterns in communities of land snails of the genus Mandarina from the Bonin Islands. Journal of Evolutionary Biology 17: 131–143.
- 15. Ueshima R, Asami T (2003) Evolution: Single-gene speciation by left-right reversal. Nature 425: 679.
- 16. Rundell RJ (2008) Cryptic diversity, molecular phylogeny and biogeography of the rock- and leaf litter-dwelling land snails of Belau (Republic of Palau, Oceania). Philosophical Transactions of the Royal Society B: Biological Sciences 363: 3401–3412.
- 17. Teshima H, Davison A, Kuwahara Y, Yokoyama J, Chiba S, et al. (2003) The evolution of extreme shell shape variation in the land snail Ainohelix editha: a phylogeny and hybrid zone analysis. Molecular Ecology 12: 1869–1878.
- 18. Thacker RW, Hadfield MG (2000) Mitochondrial phylogeny of extant Hawaiian tree snails (Achatinellinae). Molecular Phylogenetics and Evolution 16: 263–270.
- 19. Barton NH, Mallet J (1996) Natural selection and random genetic drift as causes of evolution on islands [and discussion]. Philosophical Transactions of the Royal Society of London Series B: Biological Sciences 351: 785–795.
- 20. Davison A, Chiba S, Barton NH, Clarke B (2005) Speciation and gene flow between snails of opposite chirality. PLoS Biology 3: e282.
- 21. Kasinathan R (1975) Some studies of five cyclophorid snails from peninsular India. Proceedings of the Malacological Society of London 41: 379–394.
- 22. Tielecke H (1940) Anatomie, phylogenie und tiergeographie der Cyclophoriden. Archiv für Systematische Zoologie, Neue Folge 9: 317–371.
- 23. Kongim B, Naggs F, Panha S (2006) Karyotypes of operculate land snails of the genus Cyclophorus (Prosobranchia: Cyclophoridae) in Thailand. Invertebrate Reproduction and Development 49: 1–8.
- 24. Welber L (1925) Die mantel-und geschlechtsorgane von Cyclophorus ceylanicus (Sowerby). Fauna Anat Ceylan 2: 497–538.
- 25.
Pfeiffer L (1854) Descriptions of sixty-six new land shells from the collection of H. Cuming, Esq. Proceedings of the Zoological Society of London 20 [1852]: : 56–70.
- 26. Prasankok P, Sutcharit C, Tongkerd P, Panha S (2008) Biochemical assessment of the taxonomic diversity of the operculate land snail, Cyclophorus fulguratus (Gastropoda: Cyclophoridae), from Thailand. Biochemical Systematics and Ecology 36: 900–906.
- 27. Nantarat N, Tongkerd P, Sutcharit C, Wade CM, Naggs F, et al. (2014) Phylogenetic relationships of the operculate land snail genus Cyclophorus Montfort, 1810 in Thailand. Molecular Phylogenetics and Evolution 70: 99–111.
- 28. Nantarat N, Sutcharit C, Tongkerd P, Ablett J, Naggs F, et al. (2014) An annotated catalogue of type specimens of the land snail genus Cyclophorus Monfort, 1810 (Caenogastropoda, Cyclophoridae) in the Natural History Museum, London. ZooKeys 411: 1–56.
- 29. Edgar RC (2004) MUSCLE: Multiple sequence alignment with high accuracy and high throughput. Nucleic Acids Research 32: 1792–1797.
- 30. Tamura K, Peterson D, Peterson N, Stecher G, Nei M, et al. (2011) MEGA5: Molecular evolutionary genetics analysis using maximum likelihood, evolutionary distance, and maximum parsimony methods. Molecular Biology and Evolution 28: 2731–2739.
- 31. Cornish-Bowden A (1985) Nomenclature for incompletely specified bases in nucleic acid sequences: recommendations 1984. Nucleic Acids Research 13: 3021–3030.
- 32.
Swofford DL (2003) PAUP*. Phylogenetic Analysis Using Parsimony (* and Other Methods). Version 4: Sinauer Associates, Sunderland, Massachusetts.
- 33. Farris JS, Källersjö M, Kluge AG, Bult C (1994) Testing significance of incongruence. Cladistics 10: 315–319.
- 34. Posada D (2008) jModelTest: Phylogenetic model averaging. Molecular Biology and Evolution 25: 1253–1256.
- 35. Akaike H (1974) A new look at the statistical model identification. Automatic Control, IEEE Transactions on 19: 716–723.
- 36. Felsenstein J (1985) Confidence limits on phylogenies: an approach using the bootstrap. Evolution 39: 783–791.
- 37. Stamatakis A (2006) RAxML-VI-HPC: Maximum likelihood-based phylogenetic analyses with thousands of taxa and mixed models. Bioinformatics 22: 2688–2690.
- 38. Stamatakis A, Hoover P, Rougemont J (2008) A rapid bootstrap algorithm for the RAxML web servers. Systematic Biology 57: 758–771.
- 39. Huelsenbeck JP, Ronquist F (2001) MRBAYES: Bayesian inference of phylogeny. Bioinformatics 17: 754–755.
- 40. Shimodaira H, Hasegawa M (1999) Multiple comparisons of log-likelihoods with applications to phylogenetic inference. Molecular Biology and Evolution 16: 1114.
- 41. Shimodaira H (2002) An approximately unbiased test of phylogenetic tree selection. Systematic Biology 51: 492–508.
- 42. Shimodaira H, Hasegawa M (2001) CONSEL: for assessing the confidence of phylogenetic tree selection. Bioinformatics 17: 1246–1247.
- 43. Yang Z, Rannala B (2010) Bayesian species delimitation using multilocus sequence data. Proceedings of the National Academy of Sciences 107: 9264–9269.
- 44. Heled J, Drummond AJ (2010) Bayesian inference of species trees from multilocus data. Molecular Biology and Evolution 27: 570–580.
- 45. Drummond A, Rambaut A (2007) BEAST: Bayesian evolutionary analysis by sampling trees. BMC Evolutionary Biology 7: 1–8.
- 46.
Rambaut A, Drummond AJ (2009) TRACER: MCMC Trace Analysis Tool Version v1.5.0. University of Oxford, Oxford.
- 47. Leaché AD, Fujita MK (2010) Bayesian species delimitation in West African forest geckos (Hemidactylus fasciatus). Proceedings of the Royal Society B: Biological Sciences 277: 3071–3077.
- 48. Ahmadzadeh F, Flecks M, Carretero MA, Mozaffari O, Böhme W, et al. (2013) Cryptic speciation patterns in iranian rock lizards uncovered by integrative taxonomy. PLoS ONE 8: e80563.
- 49.
Rohlf FJ (2012) Tpsutil Version 1.49. New York: Department of Ecology and Evolution, State University of New York at Stony Brook.
- 50.
Rohlf FJ (2010) Tpsdig Version 2.16. New York: Department of Ecology and Evolution, State University of New York at Stony Brook.
- 51. Klingenberg CP (2011) MorphoJ: an integrated software package for geometric morphometrics. Molecular Ecology Resources 11: 353–357.
- 52.
Dryden IL, Mardia KV (1998) Statistical Shape Analysis: John Wiley & Sons, Chichester.
- 53. Kameda Y, Kawakita A, Kato M (2007) Cryptic genetic divergence and associated morphological differentiation in the arboreal land snail Satsuma (Luchuhadra) largillierti (Camaenidae) endemic to the Ryukyu Archipelago, Japan. Molecular Phylogenetics and Evolution 45: 519–533.
- 54. Serb JM, Alejandrino A, OtÁRola-Castillo E, Adams DC (2011) Morphological convergence of shell shape in distantly related scallop species (Mollusca: Pectinidae). Zoological Journal of the Linnean Society 163: 571–584.
- 55.
Pfeiffer L (1853-1854) Cyclostomaceen. Zweite Abtheilung. Systematisches Conchylien-Cabinet von Martini und Chemnitz [1 (19) (2)]: 229–268, pls 231–236.
- 56.
Hanley SCT, Theobald W (1870-1876) Conchologia Indica: Illustrations of the Land and Freshwater Shells of British India. London. i-xviii + 1-65, 160 pl.
- 57.
Pfeiffer LGK, Fischer T (1866–1869) Novitates Conchologicae. Series Prima. Mollusca Extramarina. Band 3. Cassel, Verlag von Theodor Fischer. 301–510, pls 373–108.
- 58. Blanford WT (1864) On the classification of the Cyclostomacea of Eastern Asia. The Annals and Magazine of Natural History Series 3 13: 441–465.
- 59. Habe T (1964) Operculate land molluscs from Southeast Asia. Fauna and Flora Research Society, Kyoto University 4: 111–127.
- 60.
Nevill G (1878) Hand List of Mollusca in the Indian Museum, Calcutta. Part 1. Gastropoda. Pulmonata and Prosobranchia-Neurobranchia. Indian Museum, Calcutta. pp. 338.
- 61. Okusu A, Schwabe E, Eernisse DJ, Giribet G (2003) Towards a phylogeny of chitons (Mollusca, Polyplacophora) based on combined analysis of five molecular loci. Organisms Diversity and Evolution 3: 281–302.
- 62. Morgan JAT, DeJong RJ, Jung Y, Khallaayoune K, Kock S, et al. (2002) A phylogeny of planorbid snails, with implications for the evolution of Schistosoma parasites. Molecular Phylogenetics and Evolution 25: 477–488.
- 63.
Kessing B, Croom H, Martin A, McIntosh C, McMillan WO, et al.. (1989) The simple fool's guide to PCR. USA: Department of Zoology, University of Hawaii, Honolulu. 1–23 p.
- 64. Folmer O, Black M, Hoeh W, Lutz R, Vrijenhoek R (1994) DNA primers for amplification of mitochondrial cytochrome c oxidase subunit I from diverse metazoan invertebrates. Molecular Marine Biology and Biotechnology 3: 294–299.