Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Open Access

Peer-reviewed

Research Article

Modular Optimization of Heterologous Pathways for De Novo Synthesis of (2S)-Naringenin in Escherichia coli

Abstract

Due to increasing concerns about food safety and environmental issues, bio-based production of flavonoids from safe, inexpensive, and renewable substrates is increasingly attracting attention. Here, the complete biosynthetic pathway, consisting of 3-deoxy-D-arabinoheptulosonate 7-phosphate synthase (DAHPS), chorismate mutase/prephenate dehydrogenase (CM/PDH), tyrosine ammonia lyase (TAL), 4-coumarate:CoA ligase (4CL), chalcone synthase (CHS), chalcone isomerase (CHI), malonate synthetase, and malonate carrier protein, was constructed using pre-made modules to overproduce (2S)-naringenin from D-glucose. Modular pathway engineering strategies were applied to the production of the flavonoid precursor (2S)-naringenin from L-tyrosine to investigate the metabolic space for efficient conversion. Modular expression was combinatorially tuned by modifying plasmid gene copy numbers and promoter strengths to identify an optimally balanced pathway. Furthermore, a new modular pathway from D-glucose to L-tyrosine was assembled and re-optimized with the identified optimal modules to enable de novo synthesis of (2S)-naringenin. Once this metabolic balance was achieved, the optimum strain was capable of producing 100.64 mg/L (2S)-naringenin directly from D-glucose, which is the highest production titer from D-glucose in Escherichia coli. The fermentation system described here paves the way for the development of an economical process for microbial production of flavonoids.

Citation: Wu J, Zhou T, Du G, Zhou J, Chen J (2014) Modular Optimization of Heterologous Pathways for De Novo Synthesis of (2S)-Naringenin in Escherichia coli. PLoS ONE 9(7): e101492. https://doi.org/10.1371/journal.pone.0101492

Editor: Patrick C. Cirino, University of Houston, United States of America

Received: November 16, 2013; Accepted: June 6, 2014; Published: July 2, 2014

Copyright: © 2014 Zhou et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Funding: This work was supported by the Major State Basic Research Development Program of China (973 Program, 2012CB720806), National Natural Science Foundation of China (31000807), the Natural Science Foundation of Jiangsu Province (BK2011004, BK2010150), the Fundamental Research Funds for the Central Universities (JUSRP51307A), the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (FANEDD, 2011046), the Program for New Century Excellent Talents in University (NCET-12-0876), and the 111 Project (111-2-06). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Competing interests: The authors have declared that no competing interests exist.

Introduction

(2S)-Naringenin, a member of the flavonoid family, possesses a broad range of pharmaceutical indications due to its biochemical properties, which include antioxidative, anticancer, and anti-inflammatory activities [1], [2]. Notably, (2S)-naringenin is the starting point for the synthesis of a variety of other flavonoid molecules. Over 8000 different chemical structures can be created through the combined actions of functionalizing enzymes [3]. However, (2S)-naringenin is still chiefly obtained by extraction from plants, which is tedious and inefficient and requires consumption of substantial natural resources. Hence, biological synthesis has emerged as a highly promising alternative to the traditional extraction method for a variety of chemical compounds as it may readily be scaled up for commercial production, utilizes environmentally friendly feedstocks, and has low waste emission [4], [5].

In plants, (2S)-naringenin is synthesized via the phenylpropanoid pathway, which is a ubiquitous and well-described plant secondary metabolite pathway [6]. (2S)-Naringenin biosynthesis begins with the enzymatic conversion of L-tyrosine by tyrosine ammonia lyase (TAL) to produce p-coumaric acid, which is then converted into its corresponding coenzyme A ester, coumaroyl-CoA, through 4-coumarate:CoA ligase (4CL) (Fig. 1). This compound is subsequently condensed with three malonyl-CoA units by chalcone synthase (CHS), and the resulting (2S)-naringenin chalcone is converted to (2S)-naringenin by the action of chalcone isomerase (CHI) [7].

thumbnail
Download:
Figure 1. Modular optimization of heterologous pathways for de novo synthesis of (2S)-naringenin.

Schematics of the three modules: module one (TAL, 4CL), module two (CHS, CHI), and module three (matB, matC). aroG: the gene encoding 3-deoxy-D-arabinoheptulosonate-7-phosphate (DAHP) synthase. tyrA: the gene encoding chorismate mutase/prephenate dehydrogenase (CM/PDH). TAL: tyrosine ammonia lyase; 4CL: 4-coumarate:CoA ligase; CHS: chalcone synthase; CHI: chalcone isomerase. matB: the gene encoding R. trifolii malonate synthetase; matC: the gene encoding R. trifolii malonate carrier protein.

https://doi.org/10.1371/journal.pone.0101492.g001

Although significant progress has been made recently in improving strain titers and yields [8], [9], [10], the established protocols rely heavily on a two-step culture process with phenylpropanoid acid precursors supplemented [11], which is expensive and commercially unfavorable in large-scale fermentation processes. Previous studies have demonstrated the feasibility of de novo production of (2S)-naringenin [11] by optimizing individual pathway components until the desired performance is achieved. However, modifications of individual pathways may not be additive as precursor flux improvement may not be accommodated by downstream pathways. Indeed, some bottlenecks are not revealed until others are relieved. These may result in the accumulation of intermediate metabolites and suboptimal titers [4], [12]. Therefore, cooperative regulation of the overall pathways should generate better results [13].

To achieve direct (2S)-naringenin production from D-glucose, it has become clear from previous studies that efficient conversion of L-tyrosine to (2S)-naringenin is the limiting factor [11]. To investigate the metabolic space for efficient conversion of L-tyrosine to (2S)-naringenin, modular pathway engineering strategies [12] were applied in this study. Modular expression was combinatorially tuned by modifying plasmid gene copy numbers and promoter strengths to identify an optimally balanced pathway. Furthermore, a new modular pathway from D-glucose to L-tyrosine was assembled and re-optimized with the identified optimal modules to enable de novo synthesis of (2S)-naringenin. The optimum strain was capable of producing 100.64 mg/L (2S)-naringenin from D-glucose, which is the highest production titer from D-glucose in Escherichia coli.

Materials and Methods

E. coli strains, plasmids and general techniques

Luria broth (LB) and MOPS minimal medium [14] supplemented with 5 g/L D-glucose and an additional 4 g/L NH4Cl were used. Various combinations of ampicillin (100 µg/mL), kanamycin (40 µg/mL), chloramphenicol (20 µg/mL), and streptomycin (40 µg/mL) were added to cultures of plasmid-bearing E. coli strains. The primers and plasmids used in this study are given in Tables 1 and 2, respectively. The compatible vectors pETDuet-1, pCDFDuet-1, pRSFDuet-1, pACYCDuet-1, and pCOLADue-1 were purchased from Novagen (Darmstadt, Germany). All restriction enzymes and DNA ligase were also purchased from Novagen (Darmstadt, Germany). Codon-optimized enzymes TAL (GenBank ID: KF765779) from Rhodotorula glutinis, 4CL (GenBank ID: KF765780) from Petroselinum crispum, CHS (GenBank ID: KF765781) from Petunia X hybrida, CHI (GenBank ID: KF765782) from Medicago sativa, and matB (GenBank ID: KF765783) and matC (GenBank ID: KF765784) from Rhizobium trifolii for E. coli expression were synthesized by GeneScript (Nanjing, China). The accession numbers for unmodified genes of TAL, 4CL, CHS, CHI, matB, and matC are DQ013364, X13325, AF233638, M91079, AAC83455, and AAC83457, respectively. Gene sequences of these modified genes are provided in the Supporting Information S1. E. coli JM109 was used for plasmid propagation and BL21 (DE3) was used for flavonoid production. Polymerase chain reaction (PCR) was performed using pfu turbo polymerase (Merck, Darmstadt, Germany).

thumbnail
Download:
Table 1. Nucleotide sequences of primers.

https://doi.org/10.1371/journal.pone.0101492.t001

thumbnail
Download:
Table 2. Plasmids used in this study.

https://doi.org/10.1371/journal.pone.0101492.t002

Culture conditions

For flavonoid production from L-tyrosine, strains were first cultured in 25 mL of MOPS medium at 37°C with 220 rpm orbital shaking. After an OD600 of 1.65 had been reached, an additional 25 mL of fresh MOPS medium, a final aliquot of isopropyl-β-D-thiogalactopyranoside (IPTG) (taking the concentration to 1 mM), and a final aliquot of L-tyrosine (taking the concentration to 3 mM) were added. Cultures were subsequently conducted at 30°C for (2S)-naringenin production. (2S)-Naringenin concentrations were measured after a total fermentation time of 48 h. For malonyl-CoA availability experiments, 1 g/L of sodium malonate dibasic (Sigma) was added twice, resulting in a total concentration of 2 g/L.

For flavonoid production from D-glucose, strains were first cultured in 25 mL of MOPS medium until an OD600 of 1.65 was reached, after which an additional 25 mL of fresh MOPS medium and a final aliquot of IPTG (taking the concentration to 1 mM) were added. Cultures were subsequently conducted at 30°C for (2S)-naringenin production. For malonyl-CoA availability experiments, sodium malonate dibasic (Sigma) was added at a concentrations of 2 g/L (1 g/L added twice).

Flavonoid analysis and quantification

To analyze (2S)-naringenin and p-coumaric acid production, E. coli cells were separated through centrifugation (5000 g, 15 minutes, 4°C). To quantify levels of (2S)-naringenin, 1 mL of supernatant was extracted with an equal volume of ethyl acetate (EMD Chemicals, Darmstadt, Germany). After vortexing and centrifugation (5000 g, 15 minutes, 4°C), the top organic layer was separated and evaporated to dryness, and the remaining residue was resolubilized with 1 mL of methanol (EMD Chemicals, Darmstadt, Germany). Samples were analyzed by high-performance liquid chromatography (HPLC), using an Agilent 1100 series instrument and a reverse-phase Gemini NX-C18 column (5×110 mm) maintained at 25°C. (2S)-Naringenin was separated by elution with an acetonitrile/water gradient at a flow rate of 1.0 mL/min under the following conditions: 10% to 40% acetonitrile (vol/vol) for 10 min, 40% acetonitrile (vol/vol) for 5 min, 40% to 10% acetonitrile (vol/vol) for 2 min. The retention times under these conditions for standard authentic samples of (2S)-naringenin (Sigma-Aldrich, W530098-SAMPLE) and p-coumaric acid (Sigma-Aldrich, 55823-50 mg) were 14.085 and 10.481 min, respectively. The recombinant product was detected by monitoring absorbance at 280 nm.

The compound was identified by the area of major mass spectra signals ([M–H]−) accumulated on a liquid chromatography-mass spectrophotometer (LC-MS) (Shimadzu, Kyoto, Japan) equipped with an electrospray ionization (ESI) source. HPLC separations were performed using an Agilent Zorbax Extend-C18 column (4.6 mm×150 mm, 5 µm) under the gradient elution mode at a flow rate of 0.7 mL/min. Mobile phases A and B were water and acetonitrile, respectively, both containing 0.1% formic acid. Gradient elution was conducted as follows: 0–20 min for 5–60% B with a linear gradient, followed by 20–30 min of 100% B [15]. The MS/MS system was operated in electrospray ionization (ESI) mode. Typical operating parameters were as follows: detector voltage, 1.60 Kv; nebulizing gas (N2) flow, 1.5 L/min; drying gas (N2) flow, 200 kPa; ion accumulation time, 30 ms; scan range m/z, 100–1000 for MS1, 100–500 for MS2. The instruments used for quantitative measurements were operated in the selected ion monitoring (SIM) mode. Data-dependent tandem mass spectrometry experiments were controlled using Shimadzu Composition Formula Predictor software. The negative ion value by LC-MS of the authentic (2S)-naringenin compound was 271.0591 [M-H]−.

Construction of pCDF-KanFRT-tyrAfbraroGfbr plasmid

Chromosomal DNA from E. coli K12 was prepared by using an Ezup Column Bacteria Genomic DNA Purification Kit (Sangon Biotech, Shanghai, China). Primers Pf_aroG(NcoI) and Pr_aroG(HindIII), Pf_tyrA(NdeI) and Pr_tyrA(BlnI) were used to clone the wild-type (WT) aroG and tyrA with pfu turbo polymerase. These PCR products were then ligated into T-vector pMDTM19 (Simple) (Takara, Dalian, China), which resulted in plasmids T-aroG(WT) and T-tyrA(WT). Two amino acid substitutions were performed to obtain feedback-inhibition-resistant (fbr) tyrA gene (tyrAfbr): Met-53-Ile in the chorismate mutase domain and Ala-354-Val in the prephenate dehydrogenase domain [16]. An Asp-146-Asn substitution was performed to obtain feedback-inhibition-resistant (fbr) aroG gene (aroGfbr) [17]. The QuikChange II XL Site-Directed Mutagenesis Kit (Agilent Technologies, Santa Clara, CA) and primers Pf_tyrAfbr(53) and Pr_tyrAfbr(53), Pf_tyrAfbr(354) and Pr_tyrAfbr(354), Pf_aroGfbr(146) and Pr_aroGfbr(146) were used to perform these substitutions. The resulting plasmids were named T-tyrAfbr and T-aroGfbr, respectively.

pCDF-tyrAfbr was constructed by cloning tyrAfbr from T-tyrAfbr into NdeI/BlnI sites of pCDFDuet-1. pCDF-tyrAfbr-aroGfbr was constructed by cloning aroGfbr from T-aroGfbr into NcoI/HindIII sites of pCDF-tyrAfbr. To construct pCDF-KanFRT-tyrAfbr-aroGfbr, primers Pf_KanFRT(pfoI) and Pr_KanFRT(EcoNI) were used to amplify an FRT-flanked kanamycin resistance gene (Kan) (KanFRT) on the plasmid pKD13 [18]. After digestion with pfoI and EcoNI, this product was ligated to pfoI/EcoNI sites of pCDF-tyrAfbr-aroGfbr.

Chromosomal integration of the tyrAfbr-aroGfbr cassette

The KanFRT-tyrAfbr-aroGfbr cassette was integrated into the lacZ locus of E. coli BL21 using a lambda-red recombination-based method [18]. Briefly, KanFRT-tyrAfbr-aroGfbr was amplified from pCDF-KanFRT-tyrAfbraroGfbr with primers Pf_KanFRT-tyrAfbr-aroGfbr (CCAGGCTTTACACTTTATGCTTCCGGCTCGTATGTTGTGTGAAATTGTGAGCGGATAACAATTTCACACAGGAAACAGCTGTGTAGGCTGGAGCTGCTTCG) and Pr_KanFRT-tyrAfbr-aroGfbr (CAAAAGTTTGTGTTTTTTAAATAGTACATAATGGATTTCCTTACGCGAAATACGGGCAGACATGGCCTGCCCGGTTATTACCTAGGTTACTGGCGATTGTCATT). Both primers incorporated 80 bp of homology with the ends of the lacZ gene to facilitate integration into the proper locus. Following transformation of the cassette into E. coli BL21, colonies were verified by colony PCR and sequencing. Excision of FRT-flanked kan from the resulting strains E. coli lacZ::KanFRT-tyrAfbr-aroGfbr was mediated by transformation with FLP recombinase-expressing pCP20 as described in the literature [18].

Heterologous pathway construction and assembly

All constructed plasmids were verified by both colony PCR and Sanger sequencing. Primers and plasmids used in this study are listed in Tables 1 and 2, respectively. Plasmid constructs and further information are described in the Supporting Information S2.

Results

Design of the essential flavonoid synthetic pathway

Previous studies have demonstrated that efficient conversion of L-tyrosine to (2S)-naringenin or resveratrol is the limiting factor for de novo synthesis of (2S)-naringenin or resveratrol [11], [19]. In order to alleviate this bottleneck, firstly, the entire metabolic space for engineering the flavonoid pathway from L-tyrosine to (2S)-naringenin was exhaustively explored. There are no naturally occurring biosynthetic pathways for converting L-tyrosine into (2S)-naringenin in E. coli. Hence, selecting appropriate genetic sources for the enzymes in a pathway remains a challenging task.

As the first step of this pathway, TAL was chosen from the red yeast Rhodotorula glutinis, since this enzyme had been previously shown to have the highest in vitro enzyme activity toward L-tyrosine [11], [20], [21]. The enzymes used for conversion of p-coumaric acid to (2S)-naringenin, including 4CL from Petroselinum crispum (Pc4CL), CHS from Petunia X hybrida, and CHI from Medicago sativa, were chosen because these enzymes had been successfully utilized in previous studies [11], [19], [22]. To increase the supply of malonyl-CoA, which is a bottleneck of the native metabolism of E. coli, a recombinant malonate assimilation pathway from Rhizobium trifolii (matB and matC) was utilized [9]. All of the enzymes used in this study were codon-optimized for E. coli expression and synthesized in order to improve the expression of these enzymes.

Assembling the essential synthetic pathway into three modules

The initial synthetic pathway was divided into three modules for two reasons. First, a previous study demonstrated that the low turnover number of TAL was partially due to inhibition caused by the buildup of coumaroyl-CoA [11]; hence the flavonoid pathway was divided at the intermediate coumaroyl-CoA to investigate whether this bottleneck could be alleviated by overexpressing the downstream pathway. Second, matB and matC were placed in an individual module to modulate the amount of malonyl-CoA, which is the bottleneck when overproducing flavonoids in E. coli. Therefore, this synthetic pathway was partitioned into three modules: (1) module one consisted of genes coding for TAL and 4CL; (2) module two consisted of genes coding for CHS and CHI; (3) module three consisted of genes matB and matC to modulate the amount of malonyl-CoA (Fig. 1).

Total modular expression was calculated using promoter strengths and gene copy numbers. The strengths of T7 and Trc promoters were calculated as T7 = 5, Trc = 1. The gene copy numbers of pRSFDuet-1 (RSF origin), pETDuet-1 (pBR322 origin), pCDFDuet-1 (CDF origin), and pACYCDuet-1 (p15A origin) were assigned from the published copy numbers for the origin of replication, which are 10, 20, 40, and 100, respectively [4], [12].

Improving (2S)-naringenin production by modular pathway optimization

On the basis of previous studies [4], [11], [23], two design principles were developed to rationally design these three modules. One principle was that a high copy number plasmid would have negative effects on cell physiology when expressing heterologous pathways. Hence, the medium or low gene copy number plasmids, pETDuet-1 (pBR322 origin), pCDFDuet-1 (CDF origin), and pACYCDuet-1 (p15A origin), were used to modulate modular expression. The other was that module two should be overexpressed relative to module one to alleviate the inhibition of TAL caused by the buildup of coumaroyl-CoA.

In order to alleviate the low turnover numbers of TAL, module two was overexpressed relative to module one (Fig. 2). In the first round of modular pathway optimization (S1–S3), module three was expressed at a constant value with the lowest gene copy number and a weaker promoter (p15A × Trc), while the metabolic space between modules one and two was varied. It was found that an appropriate metabolic space between modules one and two resulted in better yields. Similarly, in the second (S4–S5), third (S6–S7), fourth (S8–S9), fifth (S10–S11), and sixth (S12–S13) rounds, module three was expressed at constant values with different gene copy numbers and promoters, while the metabolic space between modules one and two was exhaustively explored. Finally, it was found that an appropriate metabolic space between modules one and two with special modular expression of module three (p15A × T7) would result in the best (2S)-naringenin production (Fig. 3). Once this metabolic balance was achieved, such strains were capable of producing 90.59 mg/L (2S)-naringenin from L-tyrosine (Fig. 4).

thumbnail
Download:
Figure 2. Optimization of (2S)-naringenin production from L-tyrosine by engineering three modules.

pBR322: origin of pETDuet-1; CDF: origin of pCDFDuet-1; p15A: origin of pACYCDuet-1; T7: T7 promoter; Trc: Trc promoter. S1–S13 denotes strains 1–13 constructed in this study. Gray bars: p-coumaric acid (mg/L); white bars: (2S)-naringenin (mg/L).

https://doi.org/10.1371/journal.pone.0101492.g002

thumbnail
Download:
Figure 3. HPLC and LC-MS analysis of (2S)-naringenin and p-coumaric acid produced by engineered E. coli strains.

A–B: Partial HPLC chromatograms show engineered strains have a significantly increased titer of (2S)-naringenin and a dramatically decreased titer of p-coumaric acid compared to the initial strain. A: Partial HPLC chromatograms of the initial strain; B: partial HPLC chromatograms of the optimized strain constructed through module engineering. C–D: HPLC chromatograms of p-coumaric acid (C) and (2S)-naringenin (D) in our sample. E–F: Selected ion chromatograms of (2S)-naringenin (m/z 271.0587 [M–H]−) produced by E. coli. E: LC/ESI-MS chromatogram of our compound; F: MS/MS spectrum of our compound.

https://doi.org/10.1371/journal.pone.0101492.g003

thumbnail
Download:
Figure 4. Assembling individual modules to enable de novo synthesis of (2S)-naringenin.

S14–S16 denotes strains 14–16 constructed in this study. Gray bars: (2S)-naringenin (mg/L); dark gray bars: p-coumaric acid (mg/L). S14 means the new modular pathway from glucose to L-tyrosine was expressed at the plasmid of pRSFDuet-1; S15 means the new modular pathway from glucose to L-tyrosine was expressed at the plasmid of pCOLADuet-1; S16 means the new modular pathway from D-glucose to L-tyrosine was integrated into the lacZ locus of E. coli BL21 under T7 promoter.

https://doi.org/10.1371/journal.pone.0101492.g004

Assembling individual modules to enable de novo synthesis of (2S)-naringenin

When the major pathway bottlenecks from L-tyrosine to (2S)-naringenin were alleviated, the next step was assembling a modular pathway from D-glucose to L-tyrosine to precede the identified optimal modules to enable de novo synthesis of (2S)-naringenin. To obtain (2S)-naringenin from D-glucose, strains exhibiting an enhanced capacity for L-tyrosine synthesis need to be constructed. In E. coli, the first rate-limiting step in the synthesis of L-tyrosine is the condensation of phosphoenolpyruvate (PEP) and erythrose 4-phosphate (E4P) catalyzed by DAHP synthase, which possesses three isoforms (encoded by aroH, aroF, and aroG). The second rate-limiting step in the L-tyrosine biosynthesis is found at the chorismate branch point with chorismate mutase/prephenate dehydrogenase (CM/PDH, tyrA) [24]. Based on known properties of the aromatic amino acid pathway, the feedback resistant derivatives of 3-deoxy-D-arabinoheptulosonate-7-phosphate (DAHP) synthase (aroGfbr) [17] and chorismate mutase/prephenate dehydrogenase (tyrAfbr) [16] were overexpressed to increase flux toward L-tyrosine. Hence, a new individual module consisting of tyrAfbr and aroGfbr was assembled with the identified optimal modules to enable de novo synthesis of (2S)-naringenin.

Two different plasmids, one with a high gene copy number (100) and the other with a low gene copy number (10), were modulated to rebalance the entire pathway. By expressing this module on the plasmid pRSFDuet-1 (highest gene copy number) or pCOLADuet-1 (lowest gene copy number), it was observed that the titer of the product (2S)-naringenin increased when the expression of this module decreased from the highest level to the lowest level (S14–S15). Our engineering methods require the use of antibiotic cassettes and plasmid-based expression, while marker and origin of replication incompatibilities can oftentimes arise between hosts and tools. Besides, the antibiotic cassettes and plasmid-based expression would result in an increase in the metabolic burden of host cells. Therefore, this new module was integrated into the lacZ locus of E. coli BL21 under the T7 promoter. This resulted in the highest production titer of 100.64 mg/L (S16) directly from D-glucose (Fig. 4). It was found that the use of tyrosine-fermenting strains obviated the need to provide amino acids to the culture and elevated the yields of the final product.

Previous studies demonstrated that naringein chalcone could be converted to (2S)-naringenin or (2R)-naringenin spontaneously without CHI by raising the pH of the culture broth [7], [25]. Therefore, a combination of the three plasmids without the introduction of CHI, i. e., pCDF-Trc-TAL-Trc-4CL, pET-CHS, and pACYC-matC-matB, was transformed into BL21 (DE3) strain integrated with tyrAfbr and aroGfbr. No (2S)-naringenin could be detected under the same culture conditions and analytical conditions as mentioned above.

Discussion

The biosynthesis of flavonoids from safe, inexpensive, and renewable substrates is increasingly attracting attention due to concerns about food safety and environmetal issues [11], [26]. Previous studies have succeeded in producing (2S)-naringenin from p-coumaric acid [8], [9]. However, its high cost and poor water solubility restricted the direct application of phenylpropanoid acid precursors to industrial scale applications [23]. In particular, these precursors are unfavorable commercially in terms of food safety issues because most of the chemicals are obtained by chemical synthesis routes through acetylsalicyloyl chloride from the petroleum industry. In this study, a bacterial platform for (2S)-naringenin production directly from D-glucose was constructed. The strategy described here would decrease substrate-related costs and facilitate the extensive application of (2S)-naringenin in both the pharmaceutical and nutraceutical industries.

Previous studies have demonstrated the feasibility of de novo production of (2S)-naringenin [11]. The engineered strain could produce 46 mg/L (2S)-naringenin from D-glucose and up to 84 mg/L with the addition of the expensive fatty acid enzyme inhibitor, cerulenin [11]. However, the expressions of genes were only examined individually as part of the overall pathway, which would constrain production of the desired compound due to imbalance in the overall pathway [4], [12], [13]. In this study, the overall pathway, including the upstream pathway from D-glucose to L-tyrosine, the downstream pathway from L-tyrosine to (2S)-naringenin, and the malonate assimilation pathway, has been optimized. The optimal strain was capable of producing 100.64 mg/L (2S)-naringenin without the addition of cerulenin, which is the highest reported production titer from D-glucose in E. coli. This proves the necessity of varying the expressions of modules simultaneously.

In our previous work, for de novo production of (2S)-pinocembrin, the overall pathway from D-glucose to (2S)-pinocembrin was divided into four modules and expressions of the modules were varied simultaneously by modifying plasmid gene copy numbers [4]. However, it has become clear from previous studies that efficient conversion of aromatic amino acids to flavonoids is the limiting factor for de novo synthesis of these compounds [4], [11]. Therefore, the regulation of the overall pathway was divided into two separate steps to alleviate this bottleneck in this work. Furthermore, in order to find the best combination, both the plasmid gene copy number and promoter strength were varied to tune the modular expression. Finally, the production titer was increased 2.4-fold over that achieved in the previous study on (2S)-pinocembrin [4].

The engineered strains exhibited a significantly increased titer of (2S)-naringenin and a decreased titer of p-coumaric acid compared to the initial strain. However, p-coumaric acid accumulation was still observed in these strains. Further studies are required to achieve more efficient conversion of p-coumaric acid to (2S)-naringenin. In some particularly relevant studies, previous researchers have found that simultaneous deletion of genes sdhA, adhE, brnQ, and citE and overexpression of acetyl-CoA synthase, acetyl-CoA carboxylase, biotin ligase, and pantothenate kinase [10] or deletion of fumC and sucC and overexpression of ACC, PGK, GAPD, and PDH [8] could increase the (2S)-naringenin level dramatically. It is proposed that similar gains can be achieved in the strains described here to further enhance (2S)-naringenin production and decrease the accumulation of intermediates. A rational combination of these strategies could further efficiently close the gap between the current laboratory scale results and industrial scale production of flavonoids.

Supporting Information

Supporting Information S1.

DNA sequences of optimized genes.

https://doi.org/10.1371/journal.pone.0101492.s001

(DOC)

Supporting Information S2.

Description of plasmid constructs and further information.

https://doi.org/10.1371/journal.pone.0101492.s002

(DOC)

Acknowledgments

We would like to thank the students in the laboratory of Dr. Oliver Yu at The Donald Danforth Plant Science Center in St. Louis, for their administrative and logistical support. We would like to thank Oliver Yu (Donald Danforth Plant Science Center) for his valuable suggestions.

Author Contributions

Conceived and designed the experiments: JJW JWZ. Performed the experiments: JJW TTZ. Analyzed the data: JJW. Contributed reagents/materials/analysis tools: GCD JC. Wrote the paper: JJW JWZ.

References

  1. 1. Hermenean A, Ardelean A, Stan M, Herman H, Mihali CV, et al. (2013) Protective effects of naringenin on carbon tetrachloride-induced acute nephrotoxicity in mouse kidney. Chem-Biol Interact 205: 138–147.
  2. 2. Xu CW, Chen J, Zhang J, Hu XR, Zhou XY, et al. (2013) Naringenin inhibits angiotensin II-induced vascular smooth muscle cells proliferation and migration and decreases neointimal hyperplasia in balloon injured rat carotid arteries through suppressing oxidative stress. Biol Pharm Bull 36: 1549–1555.
  3. 3. Fowler ZL, Koffas MAG (2009) Biosynthesis and biotechnological production of flavanones: current state and perspectives. Appl Microbiol Biotechnol 83: 799–808.
  4. 4. Wu JJ, Du GC, Zhou JW, Chen J (2013) Metabolic engineering of Escherichia coli for (2S)-pinocembrin production from glucose by a modular metabolic strategy. Metab Eng 16: 48–55.
  5. 5. Bhan N, Xu P, Koffas MAG (2013) Pathway and protein engineering approaches to produce novel and commodity small molecules. Curr Opin Biotechnol 24: 1137–1143.
  6. 6. Wang YC, Chen S, Yu O (2011) Metabolic engineering of flavonoids in plants and microorganisms. Appl Microbiol Biotechnol 91: 949–956.
  7. 7. Miyahisa I, Kaneko M, Funa N, Kawasaki H, Kojima H, et al. (2005) Efficient production of (2S)-flavanones by Escherichia coli containing an artificial biosynthetic gene cluster. Appl Microbiol Biotechnol 68: 498–504.
  8. 8. Xu P, Ranganathan S, Fowler ZL, Maranas CD, Koffas MAG (2011) Genome-scale metabolic network modeling results in minimal interventions that cooperatively force carbon flux towards malonyl-CoA. Metab Eng 13: 578–587.
  9. 9. Leonard E, Yan Y, Fowler ZL, Li Z, Lim CG, et al. (2008) Strain improvement of recombinant Escherichia coli for efficient production of plant flavonoids. Mol Pharm 5: 257–265.
  10. 10. Fowler ZL, Gikandi WW, Koffas MAG (2009) Increased malonyl coenzyme A biosynthesis by tuning the Escherichia coli metabolic network and its application to flavanone production. Appl Environ Microbiol 75: 5831–5839.
  11. 11. Santos CNS, Koffas MAG, Stephanopoulos G (2011) Optimization of a heterologous pathway for the production of flavonoids from glucose. Metab Eng 13: 392–400.
  12. 12. Ajikumar PK, Xiao WH, Tyo KEJ, Wang Y, Simeon F, et al. (2010) Isoprenoid pathway optimization for taxol precursor overproduction in Escherichia coli. Science 330: 70–74.
  13. 13. Xu P, Gu Q, Wang WY, Wong L, Bower AGW, et al. (2013) Modular optimization of multi-gene pathways for fatty acids production in E. coli. Nat Commun 4: 1409.
  14. 14. Neidhardt FC, Bloch PL, Smith DF (1974) Culture medium for enterobacteria. J Bacteriol 119: 736–747.
  15. 15. Lee JS, Kim DH, Liu KH, Oh TK, Lee CH (2005) Identification of flavonoids using liquid chromatography with electrospray ionization and ion trap tandem mass spectrometry with an MS/MS library. Rapid Commun Mass Spectrom 19: 3539–3548.
  16. 16. Lütke-Eversloh T, Stephanopoulos G (2005) Feedback inhibition of chorismate mutase/prephenate dehydrogenase (TyrA) of Escherichia coli: generation and characterization of tyrosine-insensitive mutants. Appl Environ Microbiol 71: 7224–7228.
  17. 17. Kikuchi Y, Tsujimoto K, Kurahashi O (1997) Mutational analysis of the feedback sites of phenylalanine-sensitive 3-deoxy-D-arabino-heptulosonate-7-phosphate synthase of Escherichia coli. Appl Environ Microbiol 63: 761–762.
  18. 18. Datsenko KA, Wanner BL (2000) One-step inactivation of chromosomal genes in Escherichia coli K-12 using PCR products. Proc Natl Acad Sci 97: 6640.
  19. 19. Lim CG, Fowler ZL, Hueller T, Schaffer S, Koffas MAG (2011) High-yield resveratrol production in engineered Escherichia coli. Appl Environ Microbiol 77: 3451–3460.
  20. 20. Vannelli T, Qi W, Sweigard J, Gatenby AA, Sariaslani FS (2007) Production of p-hydroxycinnamic acid from glucose in Saccharomyces cerevisiae and Escherichia coli by expression of heterologous genes from plants and fungi. Metab Eng 9: 142–151.
  21. 21. Schroeder AC, Kumaran S, Hicks LM, Cahoon RE, Halls C, et al. (2008) Contributions of conserved serine and tyrosine residues to catalysis, ligand binding, and cofactor processing in the active site of tyrosine ammonia lyase. Phytochemistry 69: 1496–1506.
  22. 22. Leonard E, Lim KH, Saw PN, Koffas MAG (2007) Engineering central metabolic pathways for high-level flavonoid production in Escherichia coli. Appl Environ Microbiol 73: 3877–3886.
  23. 23. Wu JJ, Liu PR, Fan YM, Bao H, Du GC, et al. (2013) Multivariate modular metabolic engineering of Escherichia coli to produce resveratrol from L-tyrosine. J Biotechnol 167: 404–411.
  24. 24. Santos CNS, Xiao W, Stephanopoulos G (2012) Rational, combinatorial, and genomic approaches for engineering L-tyrosine production in Escherichia coli. Proc Natl Acad Sci 109: 13538–13543.
  25. 25. Hwang EI, Kaneko M, Ohnishi Y, Horinouchi S (2003) Production of plant-specific flavanones by Escherichia coli containing an artificial gene cluster. Appl Environ Microbiol 69: 2699–2706.
  26. 26. Koopman F, Beekwilder J, Crimi B, van Houwelingen A, Hall RD, et al. (2012) De novo production of the flavonoid naringenin in engineered Saccharomyces cerevisiae. Microb Cell Fact 11: 155.