Figures
Abstract
pGIAK1 is a 38-kb plasmid originating from the obligate alkaliphilic and halotolerant Bacillaceae strain JMAK1. The strain was originally isolated from the confined environments of the Antarctic Concordia station. Analysis of the pGIAK1 38,362-bp sequence revealed that, in addition to its replication region, this plasmid contains the genetic determinants for cadmium and arsenic resistances, putative methyltransferase, tyrosine recombinase, spore coat protein and potassium transport protein, as well as several hypothetical proteins. Cloning the pGIAK1 cad operon in Bacillus cereus H3081.97 and its ars operon in Bacillus subtilis 1A280 conferred to these hosts cadmium and arsenic resistances, respectively, therefore confirming their bona fide activities. The pGIAK1 replicon region was also shown to be functional in Bacillus thuringiensis, Bacillus subtilis and Staphylococcus aureus, but was only stably maintained in B. subtilis. Finally, using an Escherichia coli - B. thuringiensis shuttle BAC vector, pGIAK1 was shown to display conjugative properties since it was able to transfer the BAC plasmid among B. thuringiensis strains.
Citation: Guo S, Mahillon J (2013) pGIAK1, a Heavy Metal Resistant Plasmid from an Obligate Alkaliphilic and Halotolerant Bacterium Isolated from the Antarctic Concordia Station Confined Environment. PLoS ONE 8(8): e72461. https://doi.org/10.1371/journal.pone.0072461
Editor: Paul Jaak Janssen, Belgian Nuclear Research Centre SCK/CEN, Belgium
Received: May 13, 2013; Accepted: July 14, 2013; Published: August 29, 2013
Copyright: © 2013 Guo, Mahillon. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This study was financially supported by the European Space Agency (ESA-PRODEX) through the MISSEX (AO-2004, PRODEX C90255) and COMICS (ESA-AO-07-Concordia: PRODEX C90355) projects, the National Fund for Scientific Research (FNRS), and the Université Catholique de Louvain. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Organisms with optimal pH for growth in excess of pH 9 are defined as alkaliphiles [1]. Alkaliphilic bacteria can be further divided into two groups: facultative and obligate alkaliphiles. The bacteria from the former group can grow well below or at pH 8, while the latter group cannot grow well below or at pH 8 [2]. Since the first report of alkaliphilic Bacilli (Bacillus alcalophilus) by Vedder in 1934 [3], numerous alkaliphiles have been discovered, not only under extreme alkaline conditions, such as soda lakes [4], [5], [6], [7], [8], but also in more conventional environments such as gardens and soil [9], [10], [11]. Alkaliphilic bacteria are also relatively frequent in confined environments [12]. Due to their ability of producing various types of valuable enzymes, such as alkaline proteases, alkaline amylases or alkaline cellulases, these bacteria have been widely investigated for their potential uses in biotechnological applications [1], [13].
Although little is known about extrachromosomal elements from alkaliphilic bacteria, plasmid profiles from several alkaliphilic bacteria have been reported to harbor both small (<20 kb) and large (>20 kb) plasmids [14], [15]. Similarly, the development of genomic sequencing has revealed the presence of plasmids in several alkaliphic bacteria [16], [17], [18], [19], [20], [21], [22] although their actual functions have so far remained unclear. One notable exception is the presence of the cadmium resistance determinants found on both pBpOF4-01 and pBpOF4-02 plasmids of the alkaliphilic Bacillus pseudofirmus OF4 [20].
Unlike open environments, confined settings can influence the microbial prevelance and diversity [23]. The issue of confined environments not only involves bacterial contamination [24], but also horizontal gene transfers mediated by mobile genetic elements (MGEs) [25] which can indeed mediate the exchange of genetic determinants for antibiotic or heavy metal resistances, or even virulence, among bacterial populations.
During our study on the microflora present in the confined Concordia station in Antarctica, an obligately alkaliphilic and halotolerant bacterium named JMAK1 was isolated. The earlier study showed that this strain was resistant to arsenate (>40 mM) at pH 9.0. In the course of the characterization of this alkaliphilic bacterium, we discovered that its genome contained at least two large plasmids (>20 kb). In order to get more insights into the potential biological role(s) of these elements, the nucleotide sequence of the smallest detectable plasmid (38 kb) was determined and the putative functions of some of its genetic determinants explored using heterologous mesophilic and neutrophilic bacterial hosts.
Materials and Methods
Bacterial Strains and Plasmids
All the bacterial strains and plasmids used in this study are listed in Table 1. The JMAK1 strain was originally isolated from a stairway step inside the Antarctic Concordia station by the method previously described by Van Houdt et al. (2009) [23], except that alkaline medium was used to cultivate the bacteria. It was routinely incubated in pH 9.0 TY medium (10 g tryptone, 5 g yeast extract, 5 g NaCl, 1 g K2HPO4, 0.02 g MgSO4 per liter) buffered with 100 mM NaHCO3/Na2CO3 to a final pH 9 at 30°C. This bacterium was kept in the Deutsche Sammlung von Mikroorganismen und Zellkulturen (DSMZ) and Belgian Co-ordinated Collections of Micro-organisms (BCCM) under numbers DSM 24526 and LMG 27139, respectively. It is currently under characterization.
Bacillus thuringiensis BMB171 [26], Bacillus subtilis BEST2125 [27] and Staphylococcus aureus NCTC8325 cA2 were used as hosts for testing the replication of pGIAK1, while Bacillus cereus H3081.97 [28] and B. subtilis 1A280 [29] were used as cadmium and arsenic sensitive host, respectively. The Escherichia coli mutant strain DH10B was used as cloning host while B. thuringiensis GBJ001 (SmR) [30] and GBJ002 (NalR) [31] were used as host strains in the mating experiments.
Lysogeny broth (LB) medium was used for all neutrophilic bacterial growth unless otherwise indicated. For solid medium, 15 g agar was added in 1 L medium. B. thuringiensis, B. cereus and B. subtilis were grown at 30°C, whereas E. coli and S. aureus were incubated at 37°C. When required, antibiotics (Sigma-Aldrich, St. Louis, MO) were added to the media in final concentrations (µg/mL) of: chloramphenicol (Cm), 12.5; ampicillin (Amp), 100; erythromycin (Ery), 5 for B. subtilis and 25 for B. thuringiensis and B. cereus; streptomycin (Sm), 100; nalidixic acid (Nal) 15; and kanamycin (Kan), 50.
The bacterial artificial chromosome (BAC) vectors pIndigoBAC536 [32] and pEMB0557 [33] were used to clone the complete plasmid of pGIAK1, the cloning vector pHT304 [34] was used for sub-cloning library construction, and the pDG780 and pDG646 vectors [35] were used for replicon cloning. Both of them contain a Gram-negative replicon, a bla marker (active in E. coli) and antibiotics markers (for selection in Bacillus spp.).
Plasmid Constructs and DNA Manipulation
Plasmids from the JMAK1 and Bacillus strains were isolated following the procedure of Andrup et al. [36]. Plasmid sizes were estimated by comparing with the reference plasmids of B. thuringiensis serovar israelensis AND508 [36]. Plasmid preparation from E. coli and electroporation, DNA restriction and ligation were performed according to Sambrook and Russell [37]. DNA transformation was carried out through electroporation in a Gene Pulser Xcell apparatus (Bio-Rad Laboratories, Hercules, CA). The electroporation of B. thuringiensis or B. cereus [38], B. subtilis [39] and S. aureus [40] were performed as previously described. All the enzymes used in this study were purchased from Promega (Promega Corp., Madison, WI).
Plasmid pGIAK1 was digested with BamHI and ligated to the BamHI digested pIndigoBAC536 and pEMB0557 vectors, generating pGIAK11 and pGIAK12, respectively. Then pGIAK11 was cleaved by HindIII, EcoRI, PvuII and PstI separately and ligated to pHT304, cleaved with the HindIII, EcoRI, SmaI and PstI correspondingly, giving rise to four sub-cloning libraries. Plasmid pGIAK12 was introduced by electroporation into B. thuringiensis GBJ002, and the resulting GBJ002 (pGIAK12) was used as donor in the mating experiments.
The pGIAK1 replicon cloning and stability tests were performed following the method described by Huang et al. [41]. Total plasmid DNA from the strain JMAK1 was digested with EcoRI and ligated to EcoRI-digested pDG780 vector. The resulting recombinant plasmids were electroporated into B. thuringiensis BMB171 and selected on kanamycin plates. The KanR transformants were transferred into E. coli DH10B and recombinant plasmid containing the pGIAK1 replicon was confirmed by end-sequencing using the primers 780-RP (5′-TGCCTCCTCATCCTCTTCAT-3′) and M13-FP (5′-TGTAAAACGACGGCCAGT-3′).
Plasmid pGIAK1 Nucleotide Sequencing and Analysis
Plasmids from the sub-cloning libraries of plasmid pGIAK1 were extracted and sequenced by ABI 3730xl DNA Sequencer at the GATC Biotech Company (GATC Biotech, Konstanz, Germany). Sequence data were assembled and analyzed using the SeqMan 5.00 program from the DNAStar software package (Lasergene Inc., Madison, Wis.). Finally the sequence gaps were filled by PCR amplification using primers targeting the end of neighboring contigs and then sequenced. The complete sequence was annotated using the ISGA pipeline [42]. Each predicted protein sequence was manually analyzed using the BLASTP program against the GenBank database [43]. The minimal length of overlap is 80%. The genetic map of plasmid pGIAK1 was visualized in CGView program [44]. The cloning scheme was generated using Clone Manager 8.0 (Scientific and Educational Software, Cary, NC).
Nucleotide Sequence Accession Numbers
The 16S rRNA gene sequence of strain JMAK1 and the complete nucleotide sequence of plasmid pGIAK1 have been submitted to the GenBank database under accession numbers of JF729319 and JX406743, respectively.
Cadmium and Arsenic Resistance Assays
To determine the heavy metal resistances of pGIAK1, the recombinant plasmid pGIAK14 containing cad operon from the sub-cloning library was selected by PCR using primers Cad-F (5′-GCTTAGCTGTGCTTGTCGTG-3′) and Cad-R (5′-ATCCGTTACACCGACATGGT-3′). The recombinant plasmid pGIAK15 containing the ars operon was screened by PCR with primers ArsB-F (5′-TCCACCAGGAGATTTTCACA-3′) and ArsB-R (5′-GGAAATGCCGTGCTTATGTT-3′). Plasmids pGIAK14 and pGIAK15 were transferred into strain B. cereus H3081.97 and B. subtilis 1A280, respectively, via electroporation. These two recombinants were used in the cadmium and arsenic resistance tests, respectively.
Cadmium chloride (CdCl2) and sodium arsenate dibasic heptahydrate (Na2HAsO4•7H2O) were prepared as 0.1 M and 0.5 M stock solutions, respectively. The cadmium resistance was tested in LB medium while the arsenate resistance assay was performed in low-phosphate medium (LPM) supplemented with 1% tryptone, as described by Branco et al. [45]. This medium contains (in g/L), Tris 6.06 (pH 7.0), NaCl 4.68, KCl 1.49, NH4Cl 1.07, Na2SO4 0.43, MgCl2.6H2O 0.2, CaCl2.2H2O 0.03, Na2HPO4.12H2O 0.23, glucose 5.0 and tryptone 10. All the assays were carried out in 96-well micro-plates containing different concentrations of heavy metals. Each well contained 200 µL of media and 10 µL of overnight bacterial culture. Bacterial growth was measured by optical density at 595 nm on a Multiskan FC Microplate Photometer (Thermo Fisher Scientific, Inc., Waltham, MA) after 20 h of growth at 30°C.
Mating Tests
Conjugation assays were performed using the drop-on-drop method [46] with some modifications. 10 µL of overnight cultures of donor and recipient were mixed on LB agar plate and incubated for 24 h at 30°C. The lawn cultures were re-suspended in 4 mL LB medium, and 100 µL of the suspension was diluted and plated on LB agar plates in five replicates, containing antibiotics for recipients, and incubated at 30°C for 12 h. The remaining suspension was plated on LB agar plates containing corresponding antibiotics to select the transconjugants. The transconjugants were confirmed by PCR. Spontaneous mutants were discriminated from transconjugants by checking for their antibiotic resistances.
Results and Discussion
Bacterial Strain JMAK1
JMAK1 is an obligate alkaliphilic, aerobic and halotolerant spore-forming bacterium. The vegetative cells are rod-shaped (Figure 1A). The bacterium cannot grow at pH 7.0 or lower and displayed an optimal growth between pH 8.5 to pH 9.5. Although the bacterium sustained NaCl concentration up to 17% (w/v), its optimum concentration was between 1 - 3% (w/v) at pH 9. The 16S rRNA gene sequence of JMAK1 displayed 99.5% identity to that of the alkaliphilic and halotolerant “Bacillales bacterium” CPCC100153 [47] (GenBank accession No. HQ179102) isolated from alkaline soil of Hoh Xil (Qinghai-Tibet plateau). However, this strain has not been taxonomically validated yet. The closest validly described strain was Geomicrobium halophilum BH1T whose 16S rRNA shared only 93.2% identity.
(A) Bacterial cells were observed under a BX50 phase contrast microscope (Olympus, Japan). V, vegetative cell; S, spore. The bar is 5 µm. (B) Plasmid profile of strain JMAK1. The plasmid preparation was run in a 0.5% agarose gel and stained with Ethidium Bromide. The chromosomal DNA referred to the degraded linear chromosomal material. Lane 1, B. thuringiensis serovar israelensis AND508; Lane 2, JMAK1.
pGIAK1 main Features
Analysis of the plasmid content of JMAK1 (Figure 1B) revealed the presence of at least two large molecules named pGIAK1 and pGIAK2. Based on the reference plasmids of B. thuringiensis serovar israelensis AND508, their sizes were estimated to be ca. 40 and 200 kb, respectively. As shown in Figure 1B, the relative DNA intensity of pGIAK1 was much stronger than that of its large co-resident pGIAK2, suggesting a higher copy number for pGIAK1. No smaller plasmid (<20 kb) was detected in this strain.
The complete sequence of pGIAK1 was determined to be 38,362 bp, with a G+C content of 37.5%. By BLASTN [48] analysis, 95% of the plasmid DNA sequence had no homologue in the GenBank database. However, it potentially contained 49 ORFs, from which 40 had BLASTP significant similarities to sequences in the GenBank protein database (see Table S1). Based on these homologies, a potential replication region, putative arsenic and cadmium resistance operons, and potential conjugation-related genes could be identified (Figure 2, see below). Using the Easyfig 2.1 software [49], functional similarities could be identified between pGIAK1 and the heavy metal resistant plasmid pWCFS103 [50] from the distantly related Lactobacillus plantarum. As shown in Figure 3, both plasmids contain genes related to conjugation, cadmium and arsenic resistance, although the genes are arranged differently. Their conjugation regions shared no similarities while their ArsB, CadD and RepB proteins shared 68%, 36% and 38% identity, respectively.
The map was visualized in CGView [44]. The outer circles indicate the predicted CDS. The blue and light green block arrows show the predicted genes with different transcription directions. The numbers beside the arrows indicate the corresponding genes. The black circle represents the GC content and the green/purple circles represent the GC-skew. The predicted genes involved in replication, cadmium resistance, arsenic resistance and conjugation are indicated. The single cloning site BamHI is also indicated.
The displayed bar represents a length of 5,000 basepairs. The conserved regions are blue-shaded, the color intensity indicating the identity levels (from 35 to 100%). Genes that displayed homologies are indicated by the colored boxes shown below. The alignment was made by the Easyfig 2.1 program [49].
pGIAK1 Replication Region
As indicated in Table S1, gene pGIAK1_40 encodes a putative 30 kDa ParA nucleotide binding domain protein. ParA is a membrane-associated ATPase involved in the segregation of plasmid and bacterial chromosome [51]. The predicted amino acid sequence is quite similar to the plasmid copy control protein RepB of Enterococcus faecalis plasmids pEJ97 (46.7% identity), pAD1 (40.1% identity) and pAM373 (39.2% identity) [52], [53], [54], and as well as L. plantarum plasmid pWCFS103 (38% identity) mentioned above. A small hypothetical gene pGIAK1_41 encoding a 9.9 kDa polypeptide partly overlaps with pGIAK1_40. A similar structure was also found downstream of the repB genes in L. plantarum plasmid pWCFS103 (Figure 3) [50], E. faecalis pAD1 [52]. Following these two genes, pGIAK1_43 encodes a 21-kDa DnaJ domain protein. A dnaJ-like gene was also found downstream of repB gene on the E. faecalis conjugative plasmid pRE25 [55]. The two DnaJ proteins show 37.3% identity. Protein DnaJ was first known to stimulate the ATPase activity of DnaK, the bacterial Hsp70 homolog, and to help replicate phage DNA in host cells [56], [57], [58]. The genes from pGIAK_44 to pGIAK_49 are all hypothetical.
A 7.0-kb EcoRI fragment (see Figure S1A) encompassing the potential replication region of pGIAK1 (from pGIAK1_38 to pGIAK1_49, Table S1) was cloned into the E. coli pDG780 vector [35], giving rise to pGIAK13. This recombinant plasmid was electroporated and shown to replicate in B. thuringiensis BMB171. A similar result was obtained by cloning the pGIAK1 segment between ScaI and EcoRI (see Figure S1A) into pDG646, giving rise to pGIAK13A. The recombinant plasmid pGIAK13 was further electroporated into B. subtilis BEST2125 and S. aureus NCTC 8325 cA2. Transformants were obtained in both bacterial hosts. This result indicated that the pGIAK1 replicon is able to replicate in at least two Bacillus and one Staphylococcus species.
When the pGIAK13-bearing hosts were cultured without antibiotics for about 40 generations at 30°C, the recombinant plasmid was unstable in B. thuringiensis BMB171 (2% stability) and S. aureus NCTC 8325 cA2 (<0.1%), but highly stable in B. subtilis BEST2125 (100% stability). Interestingly, pGIAK1 was also found to be stably maintained in its original host since no cured strain could be obtained, even after several repeated trials (data not shown).
pGIAK1 Cadmium Resistance
pGIAK1 carries two copies of cadD-like genes (pGIAK1_34 and 39, Figure 2) whose corresponding putative proteins shared 69% identities. Gene pGIAK1_39 is close to the replication region while pGIAK1_34 is located downstream of an intact potential cadmium operon encoding the cadmium efflux system accessory protein CadC and the cadmium-translocating P-type ATPase CadA. In S. aureus, a cadmium resistance operon on plasmid pI258 contains cadA and cadC genes [59]. The 724-aa CadA protein was reported to function as an energy-dependent cadmium efflux ATPase, while the 122-aa CadC protein served as a transcription regulator of the cad operon. It was also shown that the expression of cadD in S. aureus and B. subtilis resulted in low-level resistance to cadmium [60].
In order to test whether the cadmium operon from pGIAK1 could confer cadmium resistance to Bacillus, the recombinant plasmid pGIAK14 containing the cadA, cadC and cadD genes (PvuII to BamHI region, see Figure S1B), cloned into pHT304 was introduced into the cadmium sensitive strain B. cereus H3081.97 generating recombinant B. cereus H3081.97 (pGIAK14). As shown in Figure 4A, B. cereus H3081.97 containing the vector pHT304 could not grow in the medium with cadmium chloride at a concentration higher than 0.1 mM, while B. cereus H3081.97 (pGIAK14) was able to grow in the presence of cadmium chloride up to 0.8 mM (Figure 4A). This result indicated that the cadmium resistant determinant from the alkaliphilic bacterium JMAK1 is indeed functional, as demonstrated by its activity in the heterologous and mesophilic host B. cereus H3081.97.
Cadmium resistance assay (A) was performed in LB medium and arsenate resistance assay (B) was performed in low phosphate medium containing increasing concentrations of Cd2+ (A) or As5+ (B). Bacterial growth was measured by optical density at 595 nm after 20 h of growth at 30°C. Each data point represents the mean value of triplicate cultures. The error bars indicate the standard deviation values. OD595, optical density at 595 nm.
pGIAK1 Arsenic Resistance
Plasmid pGIAK1 also potentially encodes a set of genes that may be involved in arsenic resistance, including arsR, arsK, arsB and arsC (pGIAK1_25 to pGIAK1_29, Figure 2). In bacterial ars operons, arsR encodes the repressor of arsenic resistance, arsB encodes a membrane transport protein that catalyzes extrusion from the cells, and arsC encodes an arsenate reductase that reduces arsenate to arsenite, which is the transport substrate [61], [62], [63]. The function of ArsK (former YqcK) is not well characterized yet, although it was shown that its deletion in B. subtilis affects aerobic growth and sporulation in the presence of arsenic [64]. The structure of the pGIAK1 ars operon is also similar to those of the Staphylococcus pI258 plasmid [65] and the B. subtilis skin element (skin, for sigK intervening) [66] except that pGIAK1 bears two copies of the arsR regulatory gene and one copy of arsK.
To verify the activity of this ars operon, a recombinant plasmid pGIAK15 containing the pGIAK1 11.3-kb BamHI-PstI fragment was electroporated into the arsenic sensitive strain B. subtilis 1A280. This fragment covered the BamHI to PstI pGIAK1 region (see Figure S1B). As illustrated in Figure 4B, the recombinant B. subtilis 1A280 (pGIAK15) was more than 20 times more resistant to arsenate than the negative control B. subtilis 1A280 (pGIAK14). When B. subtilis 1A280 (pGIAK15) was exposed to arsenite, it showed similar resistance (data now shown). These results demonstrated that the ars operon from plasmid pGIAK1 endows arsenic resistance to B. subtilis 1A280.
pGIAK1 Transfer Activity
The plasmid pGIAK1 encodes several polypeptides (ORFs 1 to 10) that have conserved domains of conjugation related elements. As shown in Table S1, pGIAK1_1 encodes a Replic_Relax family protein. Proteins from this family are essential for plasmid replication and plasmid DNA relaxation [67], [68]. The predicted protein of pGIAK1_2 has VirD4 conserved domain at its NH2-terminus, while product of pGIAK1_6 has a AAA-like domain which is similar to VirB4 family protein (Figure 2). In Agrobacterium tumefaciens, VirD4 is known to function as a coupling protein while VirB4 protein is postulated to energize the substrate export by ATP-driven conformational changes during the process of plasmid conjugation [69]. Both of them are essential elements of the VirB/VirD4 type IV secretion system which can mediate plasmid DNA mobilization [70]. Gene pGIAK1_7 encode a putative lipoprotein. In the case of pheromone-inducible conjugative plasmid pAD1 of E. faecalis, the pheromone sequences appeared within the carboxyl termini of signal sequences of lipoprotein precursors [71]. Moreover, pGIAK1_8 encodes a putative membrane protein and pGIAK1_9 encodes a potential cell wall hydrolase protein.
Taken together, these features suggest that pGIAK1 is a conjugative plasmid. In order to verify this assumption, the recombinant plasmid pGIAK12 containing the entire pGIAK1 cloned into the pEMB0557 vector was transferred into B. thuringiensis GBJ002 (NalR) by electroporation. Mating experiments were then performed between GBJ002 (pGIAK12) (EryR and NalR, donor) and B. thuringiensis GBJ001 (SmR, recipient). Erythromycin and streptomycin resistant transconjugants were obtained at frequencies from 10−9 to 10−8 transconjugants per recipient. No mobility was observed when mating GBJ002 (pEMB0557) (EryR and NalR, donor) with GBJ001 (SmR, recipient). This result showed that pGIAK1 is likely a conjugative plasmid. Its low transfer efficiencies could be due to a pheromone-inducible conjugative phenomenon. The conjugative mechanism still needs further investigation.
pGIAK1 Cryptic Features
In addition to the replicon, conjugation-related elements and heavy metal resistant determinants, plasmid pGIAK1 encodes other putative proteins that may have important effects on the biology of the host organism (Table S1). For instance, gene pGIAK1_15 encodes a putative methyltransferase protein while pGIAK1_23 encodes a potential tyrosine recombinase related to a B. subtilis phage integrase. The predicted product of gene pGIAK1_16 contains spore coat protein X and V domain and could therefore be involved in the sporulation of strain JMAK1. Finally, a potential potassium transport protein is encoded by pGIAK1_35. The function and role of these genes remain to be confirmed.
Conclusions
In this study, we cloned, sequenced, and analyzed the function of a 38-kb plasmid from an alkaliphilic and halotolerant bacterium JMAK1 isolated from the confined environment of the Antarctic Concordia station. Based on rrnB 16S ribosomal RNA gene sequence alignment this strain appears to be most closely related to another new “Bacillales bacterium” CPCC100153 [47] isolated from the Qinghai-Tibet plateau.
The arsenic resistance of the strain JMAK1 prompted us to further investigate the genetic determinants of this metalloid resistance from a new alkaliphilic isolate. Interestingly, plasmid sequencing showed that the plasmid pGIAK1 harbors not only arsenic but also cadmium resistance genes. Both heavy metal and metalloid resistance were confirmed by cloning their corresponding genetic determinants in sensitive Bacillus strains. Interestingly, the cad genetic determinants include three loci: one putative cadA/cadC operon and two cadD genes. The host strain was originally isolated from a stair step inside the Concordia station. The real functions of these modules still need to be determined for this novel and intriguing alkaliphilic bacterium whose genome sequencing is in progress.
pGIAK1 replicon is functional in B. thuringiensis, B. subtilis, and S. aureus and could therefore be used as shuttle cloning vector between E. coli, Bacillus spp., Staphylococcus spp. and alkaliphilic Bacillaceae strains. Moreover, pGIAK1 is also self-mobilizable and could therefore serve as appropriate tool for further investigations on plasmid exchanges among alkaliphiles or between alkaliphiles and neutrophilic Gram-positive bacteria.
Supporting Information
Figure S1.
The cloning scheme of recombinant plasmids pGIAK13, pGIAK13A, pGIAK14 and pGIAK15. (A) pGIAK13 and pGIAK13A; (B) pGIAK14 and pGIAK15. The restriction enzyme sites used for each cloning are indicated. The predicted genes of plasmid pGIAK1 with different transcription directions are presented in blue and light green block arrows. The numbers beside the arrows correspond to the predicted genes encoded by pGIAK1.
https://doi.org/10.1371/journal.pone.0072461.s001
(TIF)
Acknowledgments
We are deeply indebted to Annika Gillis for her critical reading of the manuscript and to Dr Sophie Timmery and Ruiming Han for great help with the experiments. We also acknowledge to Dr Daniel R. Zeigler (Bacillus Genetic Stock Center) for his kind supply of bacterial strain 1A280.
Author Contributions
Conceived and designed the experiments: SG JM. Performed the experiments: SG. Analyzed the data: SG JM. Contributed reagents/materials/analysis tools: SG JM. Wrote the paper: SG JM.
References
- 1. Horikoshi K (1996) Alkaliphiles – from an industrial point of view. FEMS Microbiology Reviews 18: 259–270.
- 2.
Yoshimune IYKHK (2011) Environmental Distribution and Taxonomic Diversity of Alkaliphiles. In: Horikoshi K; Bull AT; Robb FT; Stetter KO, editors. Extremophiles Handbook. 56–77.
- 3. Vedder A (1934) Bacillus alcalophilus n. sp.; benevens enkele ervaringen met sterk alcalischevoedingbodems. Anton Van Lee J Microbiol Serol 1: 143–147.
- 4. Asao M, Jung DO, Achenbach LA, Madigan MT (2006) Heliorestis convoluta sp. nov., a coiled, alkaliphilic heliobacterium from the Wadi El Natroun, Egypt. Extremophiles 10: 403–410.
- 5. Delgado O, Quillaguaman J, Bakhtiar S, Mattiasson B, Gessesse A, et al. (2006) Nesterenkonia aethiopica sp. nov., an alkaliphilic, moderate halophile isolated from an Ethiopian soda lake. Int J Syst Evol Microbiol 56: 1229–1232.
- 6. Ma Y, Xue Y, Grant WD, Collins NC, Duckworth AW, et al. (2004) Alkalimonas amylolytica gen. nov., sp. nov., and Alkalimonas delamerensis gen. nov., sp. nov., novel alkaliphilic bacteria from soda lakes in China and East Africa. Extremophiles 8: 193–200.
- 7. Vargas VA, Delgado OD, Hatti-Kaul R, Mattiasson B (2005) Bacillus bogoriensis sp. nov., a novel alkaliphilic, halotolerant bacterium isolated from a Kenyan soda lake. Int J Syst Evol Microbiol 55: 899–902.
- 8. Zhilina TN, Zavarzin GA, Rainey F, Kevbrin VV, Kostrikina NA, et al. (1996) Spirochaeta alkalica sp. nov., Spirochaeta africana sp. nov., and Spirochaeta asiatica sp. nov., alkaliphilic anaerobes from the Continental Soda Lakes in Central Asia and the East African Rift. Int J Syst Bacteriol 46: 305–312.
- 9. Echigo A, Minegishi H, Mizuki T, Kamekura M, Usami R (2010) Geomicrobium halophilum gen. nov., sp. nov., a moderately halophilic and alkaliphilic bacterium isolated from soil. Int J Syst Evol Microbiol 60: 990–995.
- 10. Guffanti AA, Finkelthal O, Hicks DB, Falk L, Sidhu A, et al. (1986) Isolation and characterization of new facultatively alkalophilic strains of Bacillus species. J Bacteriol 167: 766–773.
- 11. Usami R, Echigo A, Fukushima T, Mizuki T, Yoshida Y, et al. (2007) Alkalibacillus silvisoli sp. nov., an alkaliphilic moderate halophile isolated from non-saline forest soil in Japan. Int J Syst Evol Microbiol 57: 770–774.
- 12. La Duc MT, Dekas A, Osman S, Moissl C, Newcombe D, et al. (2007) Isolation and characterization of bacteria capable of tolerating the extreme conditions of clean room environments. Appl Environ Microbiol 73: 2600–2611.
- 13. Horikoshi K (1999) Alkaliphiles: some applications of their products for biotechnology. Microbiol Mol Biol Rev 63: 735–750.
- 14. Fish SA, Duckworth AW, Grant WD (1999) Novel plasmids from alkaliphilic halomonads. Plasmid 41: 268–273.
- 15. Gronstad A, Jaroszewicz E, Ito M, Sturr MG, Krulwich TA, et al. (1998) Physical map of alkaliphilic Bacillus firmus OF4 and detection of a large endogenous plasmid. Extremophiles 2: 447–453.
- 16. Takami H, Han CG, Takaki Y, Ohtsubo E (2001) Identification and distribution of new insertion sequences in the genome of alkaliphilic Bacillus halodurans C-125. J Bacteriol 183: 4345–4356.
- 17. Takami H, Horikoshi K (2000) Analysis of the genome of an alkaliphilic Bacillus strain from an industrial point of view. Extremophiles 4: 99–108.
- 18. Takami H, Nakasone K, Takaki Y, Maeno G, Sasaki R, et al. (2000) Complete genome sequence of the alkaliphilic bacterium Bacillus halodurans and genomic sequence comparison with Bacillus subtilis. Nucleic Acids Res 28: 4317–4331.
- 19. Takami H, Takaki Y, Uchiyama I (2002) Genome sequence of Oceanobacillus iheyensis isolated from the Iheya Ridge and its unexpected adaptive capabilities to extreme environments. Nucleic Acids Res 30: 3927–3935.
- 20. Janto B, Ahmed A, Ito M, Liu J, Hicks DB, et al. (2011) Genome of alkaliphilic Bacillus pseudofirmus OF4 reveals adaptations that support the ability to grow in an external pH range from 7.5 to 11.4. Environ Microbiol 13: 3289–3309.
- 21. Brown SD, Begemann MB, Mormile MR, Wall JD, Han CS, et al. (2011) Complete genome sequence of the haloalkaliphilic, hydrogen-producing bacterium Halanaerobium hydrogeniformans. J Bacteriol 193: 3682–3683.
- 22. Jangir PK, Singh A, Shivaji S, Sharma R (2012) Genome sequence of the alkaliphilic bacterium Nitritalea halalkaliphila type strain LW7, isolated from Lonar Lake, India. J Bacteriol 194: 5688–5689.
- 23. Van Houdt R, De Boever P, Coninx I, Le Calvez C, Dicasillati R, et al. (2009) Evaluation of the airborne bacterial population in the periodically confined Antarctic base Concordia. Microb Ecol 57: 640–648.
- 24. Klaus DM, Howard HN (2006) Antibiotic efficacy and microbial virulence during space flight. Trends Biotechnol 24: 131–136.
- 25. Timmery S, Hu X, Mahillon J (2011) Characterization of Bacilli isolated from the confined environments of the Antarctic Concordia station and the International Space Station. Astrobiology 11: 323–334.
- 26. He J, Shao X, Zheng H, Li M, Wang J, et al. (2010) Complete genome sequence of Bacillus thuringiensis mutant strain BMB171. J Bacteriol 192: 4074–4075.
- 27. Itaya M (1993) Integration of repeated sequences (pBR322) in the Bacillus subtilis 168 chromosome without affecting the genome structure. Mol Gen Genet 241: 287–297.
- 28. Hoffmaster AR, Novak RT, Marston CK, Gee JE, Helsel L, et al. (2008) Genetic diversity of clinical isolates of Bacillus cereus using multilocus sequence typing. BMC Microbiol 8: 191.
- 29. Adams A, Oishi M (1972) Genetic properties of arsenate sensitive mutants of Bacillus subtilis 168. Mol Gen Genet 118: 295–310.
- 30. Jensen GB, Wilcks A, Petersen SS, Damgaard J, Baum JA, et al. (1995) The genetic basis of the aggregation system in Bacillus thuringiensis subsp. israelensis is located on the large conjugative plasmid pXO16. J Bacteriol 177: 2914–2917.
- 31. Jensen GB, Andrup L, Wilcks A, Smidt L, Poulsen OM (1996) The aggregation-mediated conjugation system of Bacillus thuringiensis subsp. israelensis: host range and kinetics of transfer. Curr Microbiol 33: 228–236.
- 32. Luo M, Wing RA (2003) An improved method for plant BAC library construction. Methods Mol Biol 236: 3–20.
- 33. Liu X, Peng D, Luo Y, Ruan L, Yu Z, et al. (2009) Construction of an Escherichia coli to Bacillus thuringiensis shuttle vector for large DNA fragments. Appl Microbiol Biotechnol 82: 765–772.
- 34. Arantes O, Lereclus D (1991) Construction of cloning vectors for Bacillus thuringiensis. Gene 108: 115–119.
- 35. Guerout-Fleury AM, Shazand K, Frandsen N, Stragier P (1995) Antibiotic-resistance cassettes for Bacillus subtilis. Gene 167: 335–336.
- 36. Andrup L, Damgaard J, Wassermann K (1993) Mobilization of small plasmids in Bacillus thuringiensis subsp. israelensis is accompanied by specific aggregation. J Bacteriol 175: 6530–6536.
- 37.
Sambrook J, Russell DW (2001) Molecular Cloning: A laboratory manual. New York: Cold Spring Harbor Laboratory Press.
- 38. Peng D, Luo Y, Guo S, Zeng H, Ju S, et al. (2009) Elaboration of an electroporation protocol for large plasmids and wild-type strains of Bacillus thuringiensis. J Appl Microbiol 106: 1849–1858.
- 39. Xue G-P, Johnson JS, Dalrymple BP (1999) High osmolarity improves the electro-transformation efficiency of the gram-positive bacteria Bacillus subtilis and Bacillus licheniformis. Journal of Microbiological Methods 34: 183–191.
- 40. Kraemer GR, Iandolo JJ (1990) High-frequency transformation of Staphylococcus aureus by electroporation. Current Microbiology 21: 373–376.
- 41. Huang J, Guo S, Mahillon J, Van der Auwera GA, Wang L, et al. (2006) Molecular characterization of a DNA fragment harboring the replicon of pBMB165 from Bacillus thuringiensis subsp. tenebrionis. BMC Genomics 7: 270.
- 42. Hemmerich C, Buechlein A, Podicheti R, Revanna KV, Dong Q (2010) An Ergatis-based prokaryotic genome annotation web server. Bioinformatics 26: 1122–1124.
- 43. Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, et al. (1997) Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res 25: 3389–3402.
- 44. Stothard P, Wishart DS (2005) Circular genome visualization and exploration using CGView. Bioinformatics 21: 537–539.
- 45. Branco R, Chung AP, Morais PV (2008) Sequencing and expression of two arsenic resistance operons with different functions in the highly arsenic-resistant strain Ochrobactrum tritici SCII24T. BMC Microbiol 8: 95.
- 46. Uraji M, Suzuki K, Yoshida K (2002) A novel plasmid curing method using incompatibility of plant pathogenic Ti plasmids in Agrobacterium tumefaciens. Genes Genet Syst 77: 1–9.
- 47. Sun Y, Su J, Li C, Kang S, Wei Y, et al. (2011) Isolation and biological characterization of the bacteria from the alkaline soil of Hoh Xil. Microbiology China 38: 1473–1481.
- 48. Zhang Z, Schwartz S, Wagner L, Miller W (2000) A greedy algorithm for aligning DNA sequences. J Comput Biol 7: 203–214.
- 49. Sullivan MJ, Petty NK, Beatson SA (2011) Easyfig: a genome comparison visualizer. Bioinformatics 27: 1009–1010.
- 50. van Kranenburg R, Golic N, Bongers R, Leer RJ, de Vos WM, et al. (2005) Functional analysis of three plasmids from Lactobacillus plantarum. Appl Environ Microbiol 71: 1223–1230.
- 51. Bignell C, Thomas CM (2001) The bacterial ParA-ParB partitioning proteins. J Biotechnol 91: 1–34.
- 52. Weaver KE, Clewell DB, An F (1993) Identification, characterization, and nucleotide sequence of a region of Enterococcus faecalis pheromone-responsive plasmid pAD1 capable of autonomous replication. J Bacteriol 175: 1900–1909.
- 53. De Boever EH, Clewell DB, Fraser CM (2000) Enterococcus faecalis conjugative plasmid pAM373: complete nucleotide sequence and genetic analyses of sex pheromone response. Mol Microbiol 37: 1327–1341.
- 54. Sanchez-Hidalgo M, Maqueda M, Galvez A, Abriouel H, Valdivia E, et al. (2003) The genes coding for enterocin EJ97 production by Enterococcus faecalis EJ97 are located on a conjugative plasmid. Appl Environ Microbiol 69: 1633–1641.
- 55. Schwarz FV, Perreten V, Teuber M (2001) Sequence of the 50-kb conjugative multiresistance plasmid pRE25 from Enterococcus faecalis RE25. Plasmid 46: 170–187.
- 56. Qiu XB, Shao YM, Miao S, Wang L (2006) The diversity of the DnaJ/Hsp40 family, the crucial partners for Hsp70 chaperones. Cell Mol Life Sci 63: 2560–2570.
- 57. Liberek K, Georgopoulos C, Zylicz M (1988) Role of the Escherichia coli DnaK and DnaJ heat shock proteins in the initiation of bacteriophage lambda DNA replication. Proc Natl Acad Sci U S A 85: 6632–6636.
- 58. Yochem J, Uchida H, Sunshine M, Saito H, Georgopoulos CP, et al. (1978) Genetic analysis of two genes, dnaJ and dnaK, necessary for Escherichia coli and bacteriophage lambda DNA replication. Mol Gen Genet 164: 9–14.
- 59. Endo G, Silver S (1995) CadC, the transcriptional regulatory protein of the cadmium resistance system of Staphylococcus aureus plasmid pI258. J Bacteriol 177: 4437–4441.
- 60. Crupper SS, Worrell V, Stewart GC, Iandolo JJ (1999) Cloning and expression of cadD, a new cadmium resistance gene of Staphylococcus aureus. J Bacteriol 181: 4071–4075.
- 61. Dey S, Rosen BP (1995) Dual mode of energy coupling by the oxyanion-translocating ArsB protein. J Bacteriol 177: 385–389.
- 62. Ji G, Silver S (1992) Reduction of arsenate to arsenite by the ArsC protein of the arsenic resistance operon of Staphylococcus aureus plasmid pI258. Proc Natl Acad Sci U S A 89: 9474–9478.
- 63. Rosen BP (1999) Families of arsenic transporters. Trends Microbiol 7: 207–212.
- 64.
Aaltonen E (2008) Prokaryotic Arsenic Resistance - Studies in Bacillus subtilis [Ph.D. thesis]. Lund University: Lund. 41–42 p.
- 65. Ji G, Silver S (1992) Regulation and expression of the arsenic resistance operon from Staphylococcus aureus plasmid pI258. J Bacteriol 174: 3684–3694.
- 66. Sato T, Kobayashi Y (1998) The ars operon in the skin element of Bacillus subtilis confers resistance to arsenate and arsenite. J Bacteriol 180: 1655–1661.
- 67. Nunez B, De La Cruz F (2001) Two atypical mobilization proteins are involved in plasmid CloDF13 relaxation. Mol Microbiol 39: 1088–1099.
- 68. Zhou X, Caufield PW, Li Y, Qi F (2001) Complete Nucleotide Sequence and Characterization of pUA140, a Cryptic Plasmid from Streptococcus mutans. Plasmid 46: 77–85.
- 69. Bauer T, Rosch T, Itaya M, Graumann PL (2011) Localization pattern of conjugation machinery in a Gram-positive bacterium. J Bacteriol 193: 6244–6256.
- 70. Grohmann E, Muth G, Espinosa M (2003) Conjugative plasmid transfer in gram-positive bacteria. Microbiol Mol Biol Rev 67: 277–301.
- 71. Clewell DB (2011) Tales of conjugation and sex pheromones: A plasmid and enterococcal odyssey. Mob Genet Elements 1: 38–54.