PONE-D-25-01201Effects of different blood flow rates on filter and circuit life in non-anticoagulation CRRT: protocol for a three-arm, single-blind randomized controlled trial (the Flow-CRRT Study)PLOS ONE

Dear Dr. Zhao,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Aug 09 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org . When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols . Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols .

We look forward to receiving your revised manuscript.

Kind regards,

Wisit Kaewput, MD

Academic Editor

PLOS ONE

Journal Requirements:

When submitting your revision, we need you to address these additional requirements.

1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at

https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and

https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf

2. PLOS requires an ORCID iD for the corresponding author in Editorial Manager on papers submitted after December 6th, 2016. Please ensure that you have an ORCID iD and that it is validated in Editorial Manager. To do this, go to ‘Update my Information’ (in the upper left-hand corner of the main menu), and click on the Fetch/Validate link next to the ORCID field. This will take you to the ORCID site and allow you to create a new iD or authenticate a pre-existing iD in Editorial Manager.

3. We note that the grant information you provided in the ‘Funding Information’ and ‘Financial Disclosure’ sections do not match.

When you resubmit, please ensure that you provide the correct grant numbers for the awards you received for your study in the ‘Funding Information’ section.

4. Your ethics statement should only appear in the Methods section of your manuscript. If your ethics statement is written in any section besides the Methods, please delete it from any other section.

5. Please provide a complete Data Availability Statement in the submission form, ensuring you include all necessary access information or a reason for why you are unable to make your data freely accessible. If your research concerns only data provided within your submission, please write "All data are in the manuscript and/or supporting information files" as your Data Availability Statement.

6. Please include captions for your Supporting Information files at the end of your manuscript, and update any in-text citations to match accordingly. Please see our Supporting Information guidelines for more information: http://journals.plos.org/plosone/s/supporting-information.

7. Please remove all personal information, ensure that the data shared are in accordance with participant consent, and re-upload a fully anonymized data set.

Note: spreadsheet columns with personal information must be removed and not hidden as all hidden columns will appear in the published file.

Additional guidance on preparing raw data for publication can be found in our Data Policy (https://journals.plos.org/plosone/s/data-availability#loc-human-research-participant-data-and-other-sensitive-data) and in the following article: http://www.bmj.com/content/340/bmj.c181.long .

8. Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

Reviewer #4: Yes

Reviewer #5: Yes

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

Reviewer #4: Yes

Reviewer #5: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Descriptions of methods and materials in the protocol should be reported in sufficient detail for another researcher to reproduce all experiments and analyses. The protocol should describe the appropriate controls, sample size calculations, and replication needed to ensure that the data are robust and reproducible.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

Reviewer #4: Yes

Reviewer #5: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

Reviewer #4: No

Reviewer #5: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

Reviewer #4: Yes

Reviewer #5: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: As the statisitcal reviewer I will focus on methods and reporting. The trial is generally well design and the approaches are clear. the power calculations are appropriate.

1) mean imputation is not ideal, why wasn't multiple imputation considered instead? and this can be relevant to all modelling choices.

2) univariable and multivariable analyses, not univariate and multivariate

3) make sure you assess the proportional hazards assumption for the Cox models

4) number may be low for controlling for numerous covariates (especially if many are categorical) so the authors need to be ready to prioritise what to control for, if that is the case. Although if there is enough balance in all aspects through the randomisation (as expected since numbers are large for a trial, relatively) a univariable approach would be adequate, at least as a sensitivity analysis.

5) the random effects models are appropriate and well through, but the numbers may be small to safely estimate all components, so again the authors may have to compromise.

Reviewer #2: This is a study proposal. The factors under study are very relevant . The study once completed will give good insight into the problem we routinely encounter

A multicenter study will definitely be better

Reviewer #3: Clarify the impact of protocol deviations, such as BFR adjustments due to clinical needs, on both ITT and PP analyses by providing more information. It would be helpful for clinicians to clarify this.

Despite the thorough statistical approach, certain terminology (such as use of Poisson instead of negative binomial models) may require a succinct explanation for those unfamiliar with count data and overdispersion.

Despite being written in the usual English language, minor modifications could enhance readability (for instance, “staying patent for 24 hours” could be modified to “maintaining it for at least 24 hours”).

Overall, this protocol is technically sound and will provide good data that can inform clinical practice.

Reviewer #4: A randomized controlled trial (RCT) protocol on effects of different blood flow rates on filter life and circuit patency in non-anticoagulation CRRT. this RCT protocol is written in detail and supplementary information file and SPIRIT checklist is complete. I think this protocol satisfies PLOS One publication criteria and is suitable for publication.

I recommend that authors include more information about patients’ safety in the manuscript as they have included in the SI file of trial study protocol.

As per PLOS One Submission Guidelines “the name of the registry and the trial or study registration number must be included in the Abstract”. Moreover, the authors have not described where all data underlying the findings will be made available when the study is complete

Reviewer #5: In their study protocol titled “Effects of different blood flow rates on filter and circuit life in non-anticoagulation CRRT: protocol for a three-arm, single-blind randomized controlled trial (the FlowCRRT Study),” Liu et al. present an important and timely research question. However, I recommend the following revisions to further strengthen the manuscript.

1. Page 8, Introduction Section: The introduction fails to clearly explain the reasoning behind the chosen blood flow rate (BFR) thresholds of 150, 200, and 250 mL/min. As a result, readers may struggle to grasp their clinical significance or the supporting evidence. Including a brief justification based on guidelines or common practice would strengthen the study’s foundation.

2. Page 8, Introduction Section: The authors mention conflicting evidence regarding optimal blood flow rates, with some studies recommending BFR >200 mL/min and others suggesting lower rates may improve circuit patency. However, this important issue is not sufficiently discussed. The introduction would benefit from a clearer synthesis of these differing viewpoints and a more explicit acknowledgment of the ongoing debate in the literature. Highlighting this discrepancy would better justify the need for the current study.

3. Page 9, Study design: The authors should clearly specify how participants will be blinded to treatment assignment in the study design section. While they mention that allocation concealment will be maintained, the exact method of blinding is not described and should be explicitly stated to ensure transparency and reproducibility.

4. Page 9, Study objectives: The authors should avoid vague phrasing and explicitly list the specific secondary outcomes that will be evaluated. Terms like "patient clinical outcomes" and "hemodynamic parameter changes" are too broad, clearly defining which parameters will be assessed is important for the authors to communicate the outcomes effectively.

5. Page 9, Study Participants: The manuscript lacks detail on the screening process for eligible patients. The authors should specify who will be responsible for screening (e.g., nephrologist, ICU physician) and when this will occur during patient care to ensure a clear understanding of the recruitment procedure.

6. Page 9: The authors redundantly mention the blood flow rate (BFR) values in both the Randomization and Intervention sections. This redundancy can be eliminated by presenting the information a single time and making references to it later.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean? ). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy .

Reviewer #1: No

Reviewer #2: Yes:  Dr. Archith Boloor

Reviewer #3: Yes:  Malak Mohmmed Saed Abdulqadir ( Alagoury )

Reviewer #4: No

Reviewer #5: No

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/ . PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org . Please note that Supporting Information files do not need this step.

Effects of different blood flow rates on filter and circuit life in non-anticoagulation CRRT: protocol for a three-arm, single-blind randomized controlled trial (the Flow-CRRT Study)

PONE-D-25-01201R1

Dear Dr. Zhao,

We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements.

Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication.

An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager®  and clicking the ‘Update My Information' link at the top of the page. For questions related to billing, please contact billing support .

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

Kind regards,

Wisit Kaewput, MD

Academic Editor

PLOS ONE

Additional Editor Comments (optional):

Accept as is.

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Yes

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Descriptions of methods and materials in the protocol should be reported in sufficient detail for another researcher to reproduce all experiments and analyses. The protocol should describe the appropriate controls, sample size calculations, and replication needed to ensure that the data are robust and reproducible.

Reviewer #1: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: I am satisfied with the authors' responses and resulting changes to the paper. I have no further comments to make.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean? ). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy .

Reviewer #1: No

**********