PONE-D-24-50961Risk factors for osteoporosis in elderly patients with type 2 diabetes: a protocol for systematic review and meta-analysisPLOS ONE

Dear Dr. Yanru,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Jan 22 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org . When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols . Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols .

We look forward to receiving your revised manuscript.

Kind regards,

Amirhossein Ghaseminejad-Raeini

Academic Editor

PLOS ONE

Journal requirements:

1. When submitting your revision, we need you to address these additional requirements.

Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at

https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and

https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf

2. When completing the data availability statement of the submission form, you indicated that you will make your data available on acceptance. We strongly recommend all authors decide on a data sharing plan before acceptance, as the process can be lengthy and hold up publication timelines. Please note that, though access restrictions are acceptable now, your entire data will need to be made freely accessible if your manuscript is accepted for publication. This policy applies to all data except where public deposition would breach compliance with the protocol approved by your research ethics board. If you are unable to adhere to our open data policy, please kindly revise your statement to explain your reasoning and we will seek the editor's input on an exemption. Please be assured that, once you have provided your new statement, the assessment of your exemption will not hold up the peer review process.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Yes

Reviewer #2: Partly

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Yes

Reviewer #2: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Descriptions of methods and materials in the protocol should be reported in sufficient detail for another researcher to reproduce all experiments and analyses. The protocol should describe the appropriate controls, sample size calculations, and replication needed to ensure that the data are robust and reproducible.

Reviewer #1: No

Reviewer #2: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: No

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: Thank you for inviting me to review this study protocol. The topic is interesting and the protocol is well-written.

I believe that applying the following comments will improve the protocol:

- line 112: it is suggested to add your reference for this classification.

- it is suggested to include data regarding the medications of patients and adjustments in the statistical analysis as well.

-Data extraction part is somehow general and needs to be more consice.

Reviewer #2: The specific questions and recommendations are as follows:

1:Although the Introduction section offers a suitable framework, it is lacking in details and would benefit

from being expanded. It is advised to include more references in this area. The primary text's conclusion

also needs to be extended and revised. Think about including additional evidence.

2:After the Discussion section, I suggest adding a new section regarding limitations and adding additional

details about them, along with suggestions for how to resolve these problems in current and future

research. A more thorough description would be helpful.

3:the references.

It is advised that a new section explaining any acronyms used in the article be added at the end, before

4:There is no Conclusion in the manuscript. The authors are advised to create a dedicated section for concluding

points at the end of the article.

5:The discussion should be more comprehensive. It should be more vigorously approached and a detailed explanation

into the issue is required. Adding more references is suggested.

6:The manuscript is generally clear and concise; however, minor grammatical adjustments could enhance readability.

Thanks to the authors for their hard work on this Study. It’s a pleasure to review such a contribution to the

field.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean? ). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy .

Reviewer #1: No

Reviewer #2: Yes:  SEYED AMIRHOSSEIN MAZHARI

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/ . PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org . Please note that Supporting Information files do not need this step.

Attachments

Attachment

Submitted filename: Review 31.pdf

PONE-D-24-50961R1Risk factors for osteoporosis in elderly patients with type 2 diabetes: a protocol for systematic review and meta-analysisPLOS ONE

Dear Dr. Wang,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Mar 10 2025 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org . When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols . Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols .

We look forward to receiving your revised manuscript.

Kind regards,

Amirhossein Ghaseminejad-Raeini

Academic Editor

PLOS ONE

Journal Requirements:

Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Partly

Reviewer #2: Yes

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Partly

Reviewer #2: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Descriptions of methods and materials in the protocol should be reported in sufficient detail for another researcher to reproduce all experiments and analyses. The protocol should describe the appropriate controls, sample size calculations, and replication needed to ensure that the data are robust and reproducible.

Reviewer #1: Yes

Reviewer #2: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: No

Reviewer #2: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: The authors have addressed my comments, completely. I have no further comments for them. I only suggesst to make all data available as there is no restrictions for using data from already published papers.

Reviewer #2: The manuscript is analyzed appropriately and provides suitable results. Additionally, adherence

to multiple guidelines, ensures transparency and accuracy in the methodology. The Discussion

section needed to be more vigorously approached and a detailed explanation into the issue is

required. Fortunately, after extensive revision the discussion part is now more all-inclusive,

additionally limitation are better presented in the revised version. The overall language has

improved as well.

At the end I have some questions about this article.

The specific questions and recommendations are as follows:

1:

Although the Introduction section offers a suitable framework, it is lacking in details and would benefit

from being expanded. It is advised to include more references in this area. The primary text's conclusion

also needs to be extended and revised. Think about including additional evidence.

Appropriately corrected, both introduction and conclusion are now informative.

2:

After the Discussion section, I suggest adding a new section regarding limitations and adding additional

details about them, along with suggestions for how to resolve these problems in current and future

research. A more thorough description would be helpful.

A new section has been created and limitations are explained in the dedicated section.

3:

It is advised that a new section explaining any acronyms used in the article be added at the end, before the references.

New section has been incorporated into the text regarding any acronym used in the main text.

4:

There is no Conclusion in the manuscript. The authors are advised to create a dedicated section for concluding

points at the end of the article.

The structure of the text is now more standardized and conclusions are being discussed at the end of the manuscript.

5:

The discussion should be more comprehensive. It should be more vigorously approached and a detailed explanation

into the issue is required. Adding more references is suggested.

Appropriately addressed.

6:

The manuscript is generally clear and concise; however, minor grammatical adjustments could enhance readability.

Overall language and readability are improved and the text grammar has been enhanced.

Thanks to the authors for their hard work on this Revision. It’s a pleasure to review such a contribution to the

field.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean? ). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy .

Reviewer #1: No

Reviewer #2: Yes:  SEYED AMIRHOSSEIN MAZHARI

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/ . PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org . Please note that Supporting Information files do not need this step.

Attachments

Attachment

Submitted filename: Review 31a.pdf

Risk factors for osteoporosis in elderly patients with type 2 diabetes: a protocol for systematic review and meta-analysis

PONE-D-24-50961R2

Dear Dr. Wang,

We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements.

Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication.

An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager®  and clicking the ‘Update My Information' link at the top of the page. If you have any questions relating to publication charges, please contact our Author Billing department directly at authorbilling@plos.org.

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

Kind regards,

Amirhossein Ghaseminejad-Raeini

Academic Editor

PLOS ONE

Additional Editor Comments (optional):

Reviewers' comments: