Peer Review History

Original SubmissionMarch 29, 2024
Decision Letter - Rossana Mastrandrea, Editor

PONE-D-24-12715An End-to-End Implicit Neural Representation Network for Medical Volume DataPLOS ONE

Dear Dr. Yu,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Jul 05 2024 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

  • A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
  • A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
  • An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols.

We look forward to receiving your revised manuscript.

Kind regards,

Rossana Mastrandrea

Academic Editor

PLOS ONE

Journal Requirements:

When submitting your revision, we need you to address these additional requirements.

1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at 

https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and 

https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf

2. Please note that PLOS ONE has specific guidelines on code sharing for submissions in which author-generated code underpins the findings in the manuscript. In these cases, all author-generated code must be made available without restrictions upon publication of the work. Please review our guidelines at https://journals.plos.org/plosone/s/materials-and-software-sharing#loc-sharing-code and ensure that your code is shared in a way that follows best practice and facilitates reproducibility and reuse.

3. Thank you for stating the following financial disclosure: 

   "EU Horizon Marie Skłodowska-Curie Action;

Grant No. 101130271;

Title: Affective Computing Models: from Facial Expression to Mind-Reading"

Please state what role the funders took in the study.  If the funders had no role, please state: "The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript." 

If this statement is not correct you must amend it as needed. 

Please include this amended Role of Funder statement in your cover letter; we will change the online submission form on your behalf.

4. When completing the data availability statement of the submission form, you indicated that you will make your data available on acceptance. We strongly recommend all authors decide on a data sharing plan before acceptance, as the process can be lengthy and hold up publication timelines. Please note that, though access restrictions are acceptable now, your entire data will need to be made freely accessible if your manuscript is accepted for publication. This policy applies to all data except where public deposition would breach compliance with the protocol approved by your research ethics board. If you are unable to adhere to our open data policy, please kindly revise your statement to explain your reasoning and we will seek the editor's input on an exemption. Please be assured that, once you have provided your new statement, the assessment of your exemption will not hold up the peer review process.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Is the manuscript technically sound, and do the data support the conclusions?

The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented.

Reviewer #1: Yes

Reviewer #2: Partly

**********

2. Has the statistical analysis been performed appropriately and rigorously?

Reviewer #1: I Don't Know

Reviewer #2: Yes

**********

3. Have the authors made all data underlying the findings in their manuscript fully available?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: No

**********

4. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: Yes

**********

5. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: A preliminary theoretical analysis of the proposed methodology motivates its rationale. Also, this manuscript has many problems, such as structure, contribution, proposed method, etc. So, In my opinion, this is not suitable for publication.

Reviewer #2: The issues are listed in the following:

1. The professional English editing is recommended. The authors should get editing help from someone with full professional proficiency in English.

2. What is the main difference or importance of the proposed methods and the other state-of-the-arts?

3. The abstract should reflect the contributions of the manuscript. I suggest rewriting it.

4. More recent references in the context of this study need to be added and discussed in manuscript. For example, “A Secure Visual Framework for Multi-index Privacy Protection Evaluation in Networks, doi: 10.1016/j.dcan. 2022.05.007.”

5. The Conclusion section should point out the potential disadvantages and possible future research directions of the manuscript. How this work can be extended in future?

**********

6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: No

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.

Revision 1

We have submitted response letter.

Attachments
Attachment
Submitted filename: response to reviewers.pdf
Decision Letter - Xiyu Liu, Editor

PONE-D-24-12715R1An End-to-End Implicit Neural Representation Architecture for Medical Volume DataPLOS ONE

Dear Dr. Yu,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Nov 01 2024 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

  • A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
  • A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
  • An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols.

We look forward to receiving your revised manuscript.

Kind regards,

Xiyu Liu

Academic Editor

PLOS ONE

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.

Reviewer #1: (No Response)

Reviewer #2: All comments have been addressed

**********

2. Is the manuscript technically sound, and do the data support the conclusions?

The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented.

Reviewer #1: (No Response)

Reviewer #2: Yes

**********

3. Has the statistical analysis been performed appropriately and rigorously?

Reviewer #1: (No Response)

Reviewer #2: Yes

**********

4. Have the authors made all data underlying the findings in their manuscript fully available?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: (No Response)

Reviewer #2: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: (No Response)

Reviewer #2: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: This manuscript proposes an innovative architecture that integrates available deep-learning techniques focusing on compressing volume data while maintaining high reconstruction fidelity. Adequate revisions to the following points should be undertaken to justify the recommendation for publication.

� The authors should clearly state the limitations of the proposed method in other real applications.

� The abstract section is fragile. Please rewrite it, explain the result obtained and contribution, improve a proposed method, and delete unnecessary information.

� Proofread the manuscript carefully to eliminate any grammatical errors or typos and ensure clarity and coherence in writing. Additionally, adhere to the formatting and style guidelines specified by the target journal or publication venue to enhance the professionalism of the manuscript.

� I suggest the authors add a table at the end of the literature review and compare the reviewed papers to clarify the research gap better.

� Please write your contribution to this paper in the Introduction section.

� Expand the critical results in the conclusion. Focus on the main developments in the finale. Also, write the main contributions in the conclusion.

� Numerical results are good enough, but more explanations are required to analyze each figure presented.

� The simulation section needs to be more detailed. The authors should provide more information about the data they employed and the simulation process.

� Please Change the “conclusion” section to “ Conclusion and Future Work” and write future work.

� All figures are of low quality, so please improve all of them.

Good luck

Reviewer #2: The issues are listed in the following:

1. The professional English editing is recommended. The authors should get editing help from someone with full professional proficiency in English.

2. The abstract contains a large amount of information. It is recommended to simplify the language and highlight the innovative points and main results of the study. It is suggested to update some higher quality or newer literature. For example, the introduction of convolutional neural networks can be referenced as "A Novel Centralized Federated Deep Fuzzy Neural Network with Multi-objectives. Neural Architecture Search for Epistatic Detection, DOI: 10.1109 / TFUZZ. 2024.3369944 ', Fourier Transform technique introduction can be quoted "An IoMT enabled deep learning framework for automatic detection of fetal QRS: A solution to remote prenatal care, DOI10.1016 / j.j ksuci. 2022.07.002.

3. The figures included in the manuscript are not sufficiently clear. High-resolution images should be provided to ensure that all details are visible and can be thoroughly examined by readers.

4. The introduction should provide a clearer overview of the motivation, objectives, and main contributions of the study. Additionally, the limitations of existing technologies and how your work addresses these gaps should be briefly discussed.

5. Please outline your main contributions more clearly in the introduction and conclusion sections. This should include the specific innovations of your proposed end-to-end architecture and the advantages over traditional methods.

6. Your proposed end-to-end architecture requires a more detailed description.

7. The results section requires more details to substantiate your claims. For instance, for the performance evaluation of each module, more quantitative data and visualizations should be provided.

8. The selection of the dataset, experimental setup, and evaluation metrics need more detailed descriptions to ensure the reproducibility and validity of the results.

9. Please ensure that all relevant and up-to-date literature is cited and that the citation format adheres to the journal's requirements.

10. Discuss in more detail within the text how your work relates to existing technologies. This includes a comparison of your work with the current state-of-the-art and where your work offers improvements.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: No

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.

Revision 2

- Response to reviewer #1:

1. The proposed method’s limitations have been stated in the conclusion in the revision [349-356]

2. The abstract has been rewritten in the revision

3. The grammatical errors or typos have been corrected in the revision and Guidelines were checked

4. The suggested table has been added as Table 1 in the revision

5. The contributions mentioned before, but they have been expanded for clarification in the revision.[31-37]

6. The conclusion has been rewritten accordingly in the revision [338-348]

7. In Find a trade-off architecture by trade-off point approach subsection, we added Fig 7 to show the training procedure of the end to end architecture. Moreover, we also rewrote the Materials and Experimental results Section to explain each figure and Table in details in the revision. [313-330]

8. The required explanations about simulation process have been added in the Materials and Experimental Results section. Data and implementation setup subsection has been rewritten in the revision. [234-260]

9. It has been changed in the revision [337]

10. The PACE tool standardised the images according to the guidelines. But this time for assurance, the original figures' configurations and quality were adapted to the guidelines with a maximum resolution of 600 dpi.

- Response to reviewer #2:

1. The revision has been proofread to correct errors.

2. These missed reference have been cited in the revision. [11-12]

3. The PACE tool standardised the images according to the guidelines. For assurance, the original high quality figures were uploaded instead in the revision.

4. The introduction has been rewritten accordingly and for clarification, table 1 has been added to show the gaps in the revision.

5. The contributions have been explicitly mentioned in introduction and conclusion in the revision.[31-37][338-348]

6. The Proposed End-to-End architecture subsection has been updated accordingly and Data and implementation setup subsection has been updated as well in the revision. [100-104]

7. In Find a trade-off architecture by trade-off point approach subsection, we added Fig 7 to show the training procedure of the end to end architecture. Moreover, we also rewrote the Materials and Experimental results Section to explain each figure and Table in details in the revision.[265-268][272-274][287-293]

8. More details have been added to the Data and implementation setup subsection in the revision. [231-234]

9. The citations and their format have been reviewed in the revision.

10. Table 7 shows the comparison with SOTA and has been updated in both caption and description in text in the revision.[319-321]

Attachments
Attachment
Submitted filename: Response to Reviewers.docx
Decision Letter - Xiyu Liu, Editor

An End-to-End Implicit Neural Representation Architecture for Medical Volume Data

PONE-D-24-12715R2

Dear Dr. Yu,

We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements.

Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication.

An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager® and clicking the ‘Update My Information' link at the top of the page. If you have any questions relating to publication charges, please contact our Author Billing department directly at authorbilling@plos.org.

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

Kind regards,

Xiyu Liu

Academic Editor

PLOS ONE

Additional Editor Comments (optional):

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. If the authors have adequately addressed your comments raised in a previous round of review and you feel that this manuscript is now acceptable for publication, you may indicate that here to bypass the “Comments to the Author” section, enter your conflict of interest statement in the “Confidential to Editor” section, and submit your "Accept" recommendation.

Reviewer #1: All comments have been addressed

Reviewer #2: All comments have been addressed

**********

2. Is the manuscript technically sound, and do the data support the conclusions?

The manuscript must describe a technically sound piece of scientific research with data that supports the conclusions. Experiments must have been conducted rigorously, with appropriate controls, replication, and sample sizes. The conclusions must be drawn appropriately based on the data presented.

Reviewer #1: Yes

Reviewer #2: Yes

**********

3. Has the statistical analysis been performed appropriately and rigorously?

Reviewer #1: Yes

Reviewer #2: Yes

**********

4. Have the authors made all data underlying the findings in their manuscript fully available?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: The authors have addressed all the issues according to my previous comments. The related work has been enriched, and the indistinct description and deficient analysis have been further refined. More discussions have also been added. This paper has been revised thoroughly to reach the standard for publication. Consequently, I advise you to accept this paper.

Reviewer #2: All of my questions have been addressed and have been revised as required for the proposed publication in this journal.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: No

**********

Formally Accepted
Acceptance Letter - Xiyu Liu, Editor

PONE-D-24-12715R2

PLOS ONE

Dear Dr. Yu,

I'm pleased to inform you that your manuscript has been deemed suitable for publication in PLOS ONE. Congratulations! Your manuscript is now being handed over to our production team.

At this stage, our production department will prepare your paper for publication. This includes ensuring the following:

* All references, tables, and figures are properly cited

* All relevant supporting information is included in the manuscript submission,

* There are no issues that prevent the paper from being properly typeset

If revisions are needed, the production department will contact you directly to resolve them. If no revisions are needed, you will receive an email when the publication date has been set. At this time, we do not offer pre-publication proofs to authors during production of the accepted work. Please keep in mind that we are working through a large volume of accepted articles, so please give us a few weeks to review your paper and let you know the next and final steps.

Lastly, if your institution or institutions have a press office, please let them know about your upcoming paper now to help maximize its impact. If they'll be preparing press materials, please inform our press team within the next 48 hours. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

If we can help with anything else, please email us at customercare@plos.org.

Thank you for submitting your work to PLOS ONE and supporting open access.

Kind regards,

PLOS ONE Editorial Office Staff

on behalf of

Professor Xiyu Liu

Academic Editor

PLOS ONE

Open letter on the publication of peer review reports

PLOS recognizes the benefits of transparency in the peer review process. Therefore, we enable the publication of all of the content of peer review and author responses alongside final, published articles. Reviewers remain anonymous, unless they choose to reveal their names.

We encourage other journals to join us in this initiative. We hope that our action inspires the community, including researchers, research funders, and research institutions, to recognize the benefits of published peer review reports for all parts of the research system.

Learn more at ASAPbio .