PONE-D-24-02113A new protocol for multispecies bacterial infections in zebrafish and their monitoring through automated image analysisPLOS ONE

Dear Dr. Schmitz,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by May 05 2024 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: https://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols. Additionally, PLOS ONE offers an option for publishing peer-reviewed Lab Protocol articles, which describe protocols hosted on protocols.io. Read more information on sharing protocols at https://plos.org/protocols?utm_medium=editorial-email&utm_source=authorletters&utm_campaign=protocols.

We look forward to receiving your revised manuscript.

Kind regards,

Michael Schubert

Academic Editor

PLOS ONE

Journal requirements:

When submitting your revision, we need you to address these additional requirements.

1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at

https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and

https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf

2. Thank you for stating the following financial disclosure:

“Swiss National Science Foundation (grant no. 31003A_182499 and 310030_212266 to RK).”

Please state what role the funders took in the study.  If the funders had no role, please state: "The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript."

If this statement is not correct you must amend it as needed.

Please include this amended Role of Funder statement in your cover letter; we will change the online submission form on your behalf.

3. Please note that your Data Availability Statement is currently missing the DOI/accession number of each dataset OR a direct link to access each database. If your manuscript is accepted for publication, you will be asked to provide these details on a very short timeline. We therefore suggest that you provide this information now, though we will not hold up the peer review process if you are unable.

4. We note that Figure 1 in your submission contain copyrighted images. All PLOS content is published under the Creative Commons Attribution License (CC BY 4.0), which means that the manuscript, images, and Supporting Information files will be freely available online, and any third party is permitted to access, download, copy, distribute, and use these materials in any way, even commercially, with proper attribution. For more information, see our copyright guidelines: http://journals.plos.org/plosone/s/licenses-and-copyright.

We require you to either (1) present written permission from the copyright holder to publish these figures specifically under the CC BY 4.0 license, or (2) remove the figures from your submission:

1. You may seek permission from the original copyright holder of Figure 1 to publish the content specifically under the CC BY 4.0 license.

We recommend that you contact the original copyright holder with the Content Permission Form (http://journals.plos.org/plosone/s/file?id=7c09/content-permission-form.pdf) and the following text:

“I request permission for the open-access journal PLOS ONE to publish XXX under the Creative Commons Attribution License (CCAL) CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). Please be aware that this license allows unrestricted use and distribution, even commercially, by third parties. Please reply and provide explicit written permission to publish XXX under a CC BY license and complete the attached form.”

Please upload the completed Content Permission Form or other proof of granted permissions as an "Other" file with your submission.

In the figure caption of the copyrighted figure, please include the following text: “Reprinted from [ref] under a CC BY license, with permission from [name of publisher], original copyright [original copyright year].”

2. If you are unable to obtain permission from the original copyright holder to publish these figures under the CC BY 4.0 license or if the copyright holder’s requirements are incompatible with the CC BY 4.0 license, please either i) remove the figure or ii) supply a replacement figure that complies with the CC BY 4.0 license. Please check copyright information on all replacement figures and update the figure caption with source information. If applicable, please specify in the figure caption text when a figure is similar but not identical to the original image and is therefore for illustrative purposes only.

5. We note you have not yet provided a protocols.io PDF version of your protocol and/or a protocols.io DOI. When you submit your revision, please provide a PDF version of your protocol as generated by protocols.io (the file will have the protocols.io logo in the upper right corner of the first page) as a Supporting Information file. The filename should be S1_file.pdf, and you should enter “S1 File” into the Description field. Any additional protocols should be numbered S2, S3, and so on. Please also follow the instructions for Supporting Information captions [https://journals.plos.org/plosone/s/supporting-information#loc-captions]. The title in the caption should read: “Step-by-step protocol, also available on protocols.io.”

Please assign your protocol a protocols.io DOI, if you have not already done so, and include the following line in the Materials and Methods section of your manuscript: “The protocol described in this peer-reviewed article is published on protocols.io (https://dx.doi.org/10.17504/protocols.io.[...]) and is included for printing purposes as S1 File.” You should also supply the DOI in the Protocols.io DOI field of the submission form when you submit your revision.

If you have not yet uploaded your protocol to protocols.io, you are invited to use the platform’s protocol entry service [https://www.protocols.io/we-enter-protocols] for doing so, at no charge. Through this service, the team at protocols.io will enter your protocol for you and format it in a way that takes advantage of the platform’s features. When submitting your protocol to the protocol entry service please include the customer code PLOS2022 in the Note field and indicate that your protocol is associated with a PLOS ONE Lab Protocol Submission. You should also include the title and manuscript number of your PLOS ONE submission.

6. Please include captions for your Supporting Information files at the end of your manuscript, and update any in-text citations to match accordingly. Please see our Supporting Information guidelines for more information: http://journals.plos.org/plosone/s/supporting-information.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript report a protocol which is of utility to the research community and adds value to the published literature?

Reviewer #1: No

Reviewer #2: Yes

Reviewer #3: Yes

**********

2. Has the protocol been described in sufficient detail?

To answer this question, please click the link to protocols.io in the Materials and Methods section of the manuscript (if a link has been provided) or consult the step-by-step protocol in the Supporting Information files.

The step-by-step protocol should contain sufficient detail for another researcher to be able to reproduce all experiments and analyses.

Reviewer #1: No

Reviewer #2: Partly

Reviewer #3: Yes

**********

3. Does the protocol describe a validated method?

The manuscript must demonstrate that the protocol achieves its intended purpose: either by containing appropriate validation data, or referencing at least one original research article in which the protocol was used to generate data.

Reviewer #1: No

Reviewer #2: Yes

Reviewer #3: Yes

**********

4. If the manuscript contains new data, have the authors made this data fully available?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

5. Is the article presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please highlight any specific errors that need correcting in the box below.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: In this study, the Authors described the protocol they develop for establishing and tracking single and multispecies bacterial infections in the otic vesicle of the zebrafish by imaging. They also generate an image analysis pipeline for the automated segmentation of this structure, and quantify pathogen load through fluorescence intensity.

Essentially, this study is based on the description of a new methodology developed in a zebrafish model of bacterial co-infection. In my opinion, the proposed methodology is not as innovative or faster or more easily usable compared to existing techniques. Therefore, the proposed work, although the imaging analysis technology described is novel, does not present sufficiently innovative details is more suitable for a methodological journal.

Please see attached file.

Reviewer #2: Review for manuscript by Schmitz DA et al titled “A new protocol for multispecies bacterial 1 infections in zebrafish and their 2 monitoring through automated image analysis.”

The authors described a novel method to investigate multispecies bacterial infections in a zebrafish model. Zebrafish is a very upcoming model system for infectious diseases but previous studies are only investigated monospecies infection. For that reason this study is very important and will provide a lot of opportunities to study other multispecies infections. The development of a publicly available image analysis pipeline is a very valuable addition to the study.

The manuscript is well-written, the experimental approach needs some clarifications. In the supplementary materials there are 3 very well described, detailed methodology which will be greatly appreciated for other scientists.

A few required corrections/ clarification:

1. In the introduction: “Nevertheless, they already have innate immunity.” Please provide references

2. It was stated that zebrafish was infected with increasing amounts P. aeruginosa in two independent experiments – why not 3 independent experiments and what were the Ns of the other mono and multi species infection experiments?

3. Figures are blurry, please work on them.

Reviewer #3: In this manuscript the authors describe a new larval zebrafish inner ear model to assess infections by multiple pathogens at the same time. The have developed AI-based screens to automate the monitoring of these multiple pathogens within the ears of these fish. Imaging strategies are also described. The protocols are nicely detailed and should be easy for readers to follow.

The ms is well written but could use some editing for English grammar.

Specific points:

1) Figure 2: what is “survival probability?” Either they are dead or not at the specific time points so this makes no sense.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: Yes: Eva Sapi Ph.D.

Reviewer #3: No

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.

Attachments

Attachment

Submitted filename: revision.pdf

A new protocol for multispecies bacterial infections in zebrafish and their monitoring through automated image analysis

PONE-D-24-02113R1

Dear Dr. Schmitz,

We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements.

Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication.

An invoice will be generated when your article is formally accepted. Please note, if your institution has a publishing partnership with PLOS and your article meets the relevant criteria, all or part of your publication costs will be covered. Please make sure your user information is up-to-date by logging into Editorial Manager at Editorial Manager® and clicking the ‘Update My Information' link at the top of the page. If you have any questions relating to publication charges, please contact our Author Billing department directly at authorbilling@plos.org.

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

Kind regards,

Michael Schubert

Academic Editor

PLOS ONE

Additional Editor Comments (optional):

Please take note of the reviewer comment concerning the lack of image sharpness.

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript report a protocol which is of utility to the research community and adds value to the published literature?

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

2. Has the protocol been described in sufficient detail?

To answer this question, please click the link to protocols.io in the Materials and Methods section of the manuscript (if a link has been provided) or consult the step-by-step protocol in the Supporting Information files.

The step-by-step protocol should contain sufficient detail for another researcher to be able to reproduce all experiments and analyses.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

3. Does the protocol describe a validated method?

The manuscript must demonstrate that the protocol achieves its intended purpose: either by containing appropriate validation data, or referencing at least one original research article in which the protocol was used to generate data.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

4. If the manuscript contains new data, have the authors made this data fully available?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception (please refer to the Data Availability Statement in the manuscript PDF file). The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: N/A

**********

5. Is the article presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please highlight any specific errors that need correcting in the box below.

Reviewer #1: Yes

Reviewer #2: Yes

Reviewer #3: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: I have reviewed the supplementary materials that were not accessible for my previous revision due to technical problems (as discussed with plos one supporting staff). Now the manuscript is suitable for publication in the Plos one lab protocol section)

Reviewer #2: The authors addressed all concerns by the 3 reviewers. The only thing I still would like to see sharper images.

Reviewer #3: All concerns were addressed. Nothing more to add here. Why does this have a minimum character requirement for a resubmission? xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: Yes: Eva Sapi

Reviewer #3: No

**********