PONE-D-20-23037

Profiles of competence development in upper secondary education and their predictors

PLOS ONE

Dear Dr. Freund,

Thank you for submitting your manuscript to PLOS ONE. After careful consideration, we feel that it has merit but does not fully meet PLOS ONE’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Both reviewers acknowledged the strong potential of the proposal and that it will be a valuable contribution to the existing literature. However, reviewer 1 also indicated several smaller issues which I think you can easily address, and they would make your registered report more robust and transparent. I'm looking forward to the revised manuscript.

Please submit your revised manuscript by Dec 21 2020 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at plosone@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pone/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the academic editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

If you would like to make changes to your financial disclosure, please include your updated statement in your cover letter. Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

If applicable, we recommend that you deposit your laboratory protocols in protocols.io to enhance the reproducibility of your results. Protocols.io assigns your protocol its own identifier (DOI) so that it can be cited independently in the future. For instructions see: http://journals.plos.org/plosone/s/submission-guidelines#loc-laboratory-protocols

We look forward to receiving your revised manuscript.

Kind regards,

Vitomir Kovanovic, Ph.D.

Academic Editor

PLOS ONE

Journal Requirements:

When submitting your revision, we need you to address these additional requirements.

1. Please ensure that your manuscript meets PLOS ONE's style requirements, including those for file naming. The PLOS ONE style templates can be found at

https://journals.plos.org/plosone/s/file?id=wjVg/PLOSOne_formatting_sample_main_body.pdf and

https://journals.plos.org/plosone/s/file?id=ba62/PLOSOne_formatting_sample_title_authors_affiliations.pdf

2. We note that you have stated that you will provide repository information for your data at acceptance. Should your manuscript be accepted for publication, we will hold it until you provide the relevant accession numbers or DOIs necessary to access your data. If you wish to make changes to your Data Availability statement, please describe these changes in your cover letter and we will update your Data Availability statement to reflect the information you provide.

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Yes

Reviewer #2: Yes

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Partly

Reviewer #2: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Reviewer #1: Yes

Reviewer #2: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: Section 3.3

I would recommend including a table of the data (if possible) such as listing attribute names and values that will feed your model. This would allow the reader to gain a better understanding of what data you included and the relationship it has with your hypothesis and methodological approach.

Section 3.4.3

Include a table (if possible) that shows the processes of model evaluation, i.e. best fit statistics, number of classes and associated model. This will help the reader how you determined which model was the best choice.

My only concern is how do you know for sure that a generalised and a specialised profile of competency will be the only viable latent profiles? What if the model yields a competency based profile that is completely unexpected? For example, a latent profile that shares both characteristics of a generalised and specialised competency or perhaps something entirely different? How would you address a model that recommends having 4 or 5 latent profiles as the best fit? It did not seem clear to me that the data used and methodology can and only yield either a generalised or specialised profile of competency.

Regardless, I believe this research has a lot of potential.

Reviewer #2: This seems like a straightforward study for which the origin of the data, as well as the purpose is very clear. Maybe the discussion and analysis of all presented background variables in relation with the latent profiles is a bit too ambitious but I nevertheless deem them feasible. I'm looking very much forward to the results.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No

Reviewer #2: Yes: Philipp Sonnleitner

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.

Profiles of competence development in upper secondary education and their predictors

PONE-D-20-23037R1

Dear Dr. Freund,

We’re pleased to inform you that your manuscript has been judged scientifically suitable for publication and will be formally accepted for publication once it meets all outstanding technical requirements.

Within one week, you’ll receive an e-mail detailing the required amendments. When these have been addressed, you’ll receive a formal acceptance letter and your manuscript will be scheduled for publication.

An invoice for payment will follow shortly after the formal acceptance. To ensure an efficient process, please log into Editorial Manager at http://www.editorialmanager.com/pone/, click the 'Update My Information' link at the top of the page, and double check that your user information is up-to-date. If you have any billing related questions, please contact our Author Billing department directly at authorbilling@plos.org.

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they’ll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact onepress@plos.org.

Kind regards,

Vitomir Kovanovic, Ph.D.

Academic Editor

PLOS ONE

Additional Editor Comments (optional):

The reviewer 1, who had some small issues identified in the previous round, indicated that all the concerns were adequately addressed, so no need for any further changes. 

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does the manuscript provide a valid rationale for the proposed study, with clearly identified and justified research questions?

The research question outlined is expected to address a valid academic problem or topic and contribute to the base of knowledge in the field.

Reviewer #1: Yes

**********

2. Is the protocol technically sound and planned in a manner that will lead to a meaningful outcome and allow testing the stated hypotheses?

The manuscript should describe the methods in sufficient detail to prevent undisclosed flexibility in the experimental procedure or analysis pipeline, including sufficient outcome-neutral conditions (e.g. necessary controls, absence of floor or ceiling effects) to test the proposed hypotheses and a statistical power analysis where applicable. As there may be aspects of the methodology and analysis which can only be refined once the work is undertaken, authors should outline potential assumptions and explicitly describe what aspects of the proposed analyses, if any, are exploratory.

Reviewer #1: Yes

**********

3. Is the methodology feasible and described in sufficient detail to allow the work to be replicable?

Reviewer #1: Yes

**********

4. Have the authors described where all data underlying the findings will be made available when the study is complete?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception, at the time of publication. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

**********

5. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS ONE does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

**********

6. Review Comments to the Author

Please use the space provided to explain your answers to the questions above and, if applicable, provide comments about issues authors must address before this protocol can be accepted for publication. You may also include additional comments for the author, including concerns about research or publication ethics.

You may also provide optional suggestions and comments to authors that they might find helpful in planning their study.

(Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: Thank you for taking the time and addressing the comments for Manuscript Number PONE-D-20-23037R1. The revised manuscript changes are significant, and I believe that all comments were adequately addressed to be accepted for PLOS ONE.

**********

7. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

If you choose “no”, your identity will remain anonymous but your review may still be made public.

Do you want your identity to be public for this peer review? For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: No