Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

< Back to Article

Table 1.

The DC applied during the insulation resistance IR testing (Guidelines from IEEE Std. 43).

More »

Table 1 Expand

Table 2.

From the IEEE Std. 43, the overall minimum IR values in MΩ at 40 °C.

More »

Table 2 Expand

Table 3.

The recommended P.I value based on the IEEE standard [19].

More »

Table 3 Expand

Fig 1.

Currents during A. C. voltage supply and dissipation factor (Tan Delta) angle.

More »

Fig 1 Expand

Table 4.

Dielectric dissipation factor (maximum value) of single bars and coils in new condition with guard ring electrodes up to a rated voltage of Un = 21 kV [22].

More »

Table 4 Expand

Fig 2.

Sources of partial discharge in a stator winding insulation, as in (EC&M Oct.

18, 2018).

More »

Fig 2 Expand

Table 5.

Review summary on HV Motor Testing Technique.

More »

Table 5 Expand

Table 6.

Parameters, weightage for respective parameters, scoring, and their description.

More »

Table 6 Expand

Table 7.

Proposed criteria for conditional Factor CF calculation.

More »

Table 7 Expand

Table 8.

Description to examine the physical condition of the motor.

More »

Table 8 Expand

Table 9.

Summary of the weightage, scoring and scoring description.

More »

Table 9 Expand

Table 10.

Summary overall proposed HV Motor Health Index assessment.

More »

Table 10 Expand

Fig 3.

The proposed overall health index OHIM assessment of the HV motors based on electrical testing and conditional factors.

More »

Fig 3 Expand

Table 11.

Comparison of existing HV motor HI assessment approaches and OHIM.

More »

Table 11 Expand

Fig 4.

GM-151B is an HV Motor used to run pump G-151B, the Boiler Feed Water name Plate Details.

More »

Fig 4 Expand

Table 12.

GM-151B Maintenance Record Obtained from Case Study for Health Index Calculations.

More »

Table 12 Expand

Table 13.

Results converted into Health Index scoring table for motor GM-151B.

More »

Table 13 Expand

Table 14.

GM-151B Maintenance Record Obtained for Conditional Factor Calculations.

More »

Table 14 Expand

Table 15.

Results Converted into Conditional Factor Scoring Table for GM-151B.

More »

Table 15 Expand

Fig 5.

CM-01004 is an HV Motor used to run C-1004, Nitrogen Off Gas Compressor name Plate Details.

More »

Fig 5 Expand

Table 16.

CM-01004 maintenance record obtained from case study for health index Calculations.

More »

Table 16 Expand

Table 17.

Results converted into Health Index scoring table for motor CM-01004.

More »

Table 17 Expand

Table 18.

GM-151B maintenance record obtained for conditional factor calculations.

More »

Table 18 Expand

Table 19.

Results converted into conditional factor scoring table for GM-151B.

More »

Table 19 Expand

Fig 6.

GM-0651B is an HV Motor used to run pump G-06501B, Sea Water Pump (a) Site Picture of HV Motor (b) Name Plate Details.

More »

Fig 6 Expand

Table 20.

CM-01004 maintenance record obtained from case study for health index calculations.

More »

Table 20 Expand

Table 21.

Results converted into Health Index scoring table for motor CM-01004.

More »

Table 21 Expand

Table 22.

GM-151B maintenance record obtained for conditional factor calculations.

More »

Table 22 Expand

Table 23.

Results converted into conditional factor scoring table for GM-151B.

More »

Table 23 Expand

Fig 7.

The OHIM Results patterns of HV Motor GM-151B (a) HI tests assessment (b) Conditional factor CF calculation.

More »

Fig 7 Expand

Fig 8.

The OHIM Results patterns of HV Motor CM-01004 (a) HI test assessment (b) Conditional factor CF calculation.

More »

Fig 8 Expand

Fig 9.

The OHIM Results patterns of HV Motor GM-06501B (a) HI test assessment (b) Conditional factor CF calculation.

More »

Fig 9 Expand