Fig 1.
Fitting flow of DAKM algorithm.
Fig 2.
Fitting deviation calculation of data points.
Fig 3.
The outer surface of human molar.
(Reprinted from [36] under a CC BY license, with permission from [The Science Press], original copyright [2010]).
Fig 4.
Intersection between cutting planes and a triangular mesh surface.
Fig 5.
Tool path generated by the section plane method.
(Reprinted from [36]under a CC BY license, with permission from [The Science Press], original copyright [2010]).
Fig 6.
Cutter location points in plane XOZ.
Fig 7.
Comparison of knot value distributions for three algorithms.
Table 1.
Comparison of experimental data from three different algorithms.
Fig 8.
Comparison of the number of control points for the three algorithms.
Fig 9.
Comparison of average fitting errors for the three algorithms.
Fig 10.
Comparison of execution time for the three algorithms.