Fig 1.
Geographical location of the target area.
Source: USGS Earth Resources Observatory and Science Center (https://www.usgs.gov/centers/eros).
Table 1.
The SAR datasets information.
Fig 2.
Interference phase combination.
Fig 3.
Spatial distribution of different data sampling points.
Fig 4.
Procedures of time-series analysis of SBAS-InSAR.
Fig 5.
Part period coherence coefficient.
Fig 6.
Time-series surface accumulated deformation in the target area in different periods.
Fig 7.
Mean Deformation Velocity of gully control and land consolidation area.
Source: USGS Earth Resources Observatory and Science Center (https://www.usgs.gov/centers/eros).
Fig 8.
Comparison between time series of InSAR processing results and GPS measurements.
Table 2.
Comparison between time series of InSAR processing and GPS measurements results.
Fig 9.
Subsidence in the target area vs. monthly erosive precipitation.
Fig 10.
Water level at sampling point vs. ground water table.
Table 3.
Main physical properties of original loess and compacted loess at different locations.
Fig 11.
Comparison of moisture and dry density of compacted loess in different depth.
Fig 12.
Subsidence rate and fill thickness in gully control and land consolidation.