Fig 1.
System block diagram of the electrodeless plasma lighting system.
Fig 2.
Electrical model of plasma lamp (Fig 2a), and comparison of measured and simulated impedances (Fig 2b).
Table 1.
Parameters of the plasma bulb model.
Fig 3.
Proposed T-shaped dual-state matching design schematic.
Table 2.
Extracted component values of the dual impedance transformer.
Fig 4.
PLS test setup.
Fig 5.
Return losses (Fig 5a) and impedances (Fig 5b) of cold and hot states following impedance transformer implementation.
Table 3.
Comparison with the previous works.