Fig 1.
Comparison of repeat-flanking PCR and TP-PCR melt peaks.
Melt peaks of normal and HD-affected samples are plotted in blue and red lines, respectively, while the pHTT(CAG)26 and pHTT(CAG)33 melt peaks are in black lines. Samples were assayed in triplicate. Top, repeat-flanking PCR MCA of the normal sample produces a single melt peak with a Tm in the normal range, whereas the HD-affected samples produce a dominant melt peak with Tm in the normal range and second melt peak with Tm in the expanded range. Melt peak height of the expanded allele decreases with increasing repeat length, risking an absent expanded allele peak if expansion is very large, with only the normal allele peak present. Bottom, TP-PCR MCA produces a single distinct melt peak in every sample regardless of disease status or length of repeat. The melt peak Tm relative to the threshold temperatures of pHTT(CAG)26 and pHTT(CAG)33 effectively determine normal or HD-affected status of each sample.
Fig 2.
Reproducibility of repeat-flanking PCR and TP-PCR melt peaks.
Sample GM09197, which carries an expanded allele of ~180 CAG repeats, was assayed in parallel by repeat-flanking PCR MCA and TP-PCR MCA. Forty-eight replicates of each assay were performed. Melt peaks of replicates are plotted in red, while the melt peaks of the control plasmids pHTT(CAG)26 and pHTT(CAG)33 are in black. Top, using repeat-flanking PCR MCA, the expanded allele melt peak is much weaker than the normal allele and is almost flat, making result interpretation ambiguous. Bottom, using TP-PCR MCA, a highly reproducible and distinct single melt peak is observed, with a Tm clearly in the HD-affected range.
Fig 3.
TP-PCR melt peaks and capillary electropherograms of genotype-known CCR (Coriell Cell Repositories) samples.
For all samples, melt peak temperature correlated well with repeat length of the larger allele. Verified or CCR-provided genotypes are indicated at the upper right corner of each electropherogram. Allele sizes determined from TP-PCR capillary electrophoresis are indicated by arrows. Insets show magnified view of expanded alleles. For all samples, the allele sizes and genotypes determined using TP-PCR assay were concordant with the verified allele sizes.
Fig 4.
Correlation of TP-PCR melt peak temperature with CAG repeat size of the larger allele.
NL, sample carrying only normal alleles; IA, sample carrying an intermediate allele; EX, sample carrying an expanded allele. A good correlation was observed between the TP-PCR melt peak Tm and the CAG repeat size of the larger allele among the samples, allowing unambiguous discrimination between normal and HD-affected samples.
Table 1.
Correspondence of the CAG repeat size of the larger allele obtained from this TP-PCR CE analysis with previously verified allele sizes.
Fig 5.
Normalized melt curves and melt peaks of 30 genotype-known CCR samples.
Samples harboring normal-only, intermediate and expanded alleles are plotted in blue, grey and red lines, respectively. Based on the Tms of the samples relative to the threshold temperatures generated by pHTT(CAG)26 and pHTT(CAG)33, all CCR samples were correctly classified.
Fig 6.
TP-PCR MCA profiles of 69 clinical samples enriched for Huntington disease.
Samples harboring normal-only, intermediate and expanded alleles are plotted in blue, grey and red lines, respectively. The Tms and corresponding capillary electropherograms of two normal, two IA and two HD-affected samples are shown. Based on the Tms of the samples relative to the threshold temperatures generated by pHTT(CAG)26 and pHTT(CAG)33, all 69 clinical samples were correctly classified.
Fig 7.
Analytic specificity of the TP-PCR MCA assay.
Analytic specificity was assessed by performing the assay on samples carrying premutation or full mutation FMR1 alleles (FXS-PM/FM) or full mutation DMPK alleles (DM1-FM), together with HD-normal and HD-affected samples as controls. The TP-PCR melt peak temperatures of the 4 samples carrying FXS premutations or full mutations, and the 2 samples carrying DM1 expansions, were observed to be lower than the TT of the control plasmid pHTT(CAG)26. The absence of any Tm higher than the TT of pHTT(CAG)33 in these samples indicates the absence of non-specific amplification at the FXS and DM1 repeat loci. These results indicate that the HTT TP-PCR MCA assay is specific for the Huntington disease locus.
Fig 8.
Performance characteristics of the TP-PCR MCA assay.
Analytic sensitivity was determined over an input DNA range of 100 pg to 1 μg. Accurate sample classification was achieved using input DNA of 10 ng to 1 μg (a). The assay performed equally well using DNA extracted from blood, buccal swab, or saliva (b). The presence of glycogen of up to 20 μg did not adversely affect the assay (c), but increasing amounts of sodium acetate contamination produced progressively right-shifted melt peak temperatures, and the assay was inhibited at 100 mM concentration (d). All experiments were performed in triplicate.