Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

< Back to Article

Figure 1.

Map of Tabun Cave with excavated squares and location of the sampled layers: Beds J82BS and J83B1 in gray, R63 in dashed line.

The cave outline is based on a map by Goldberg [101, pl. 1].

More »

Figure 1 Expand

Figure 2.

Tabun section showing the general location of the studied samples.

More »

Figure 2 Expand

Table 1.

The three Yabrudian assemblages.

More »

Table 1 Expand

Table 2.

Frequencies of type of cortex (including all items aside cores and core-tools).

More »

Table 2 Expand

Figure 3.

Blades (1–4) and thinning flakes (5–8) from Bed J83B1.

More »

Figure 3 Expand

Figure 4.

NBK-flake shaped into a denticulate (1), overpass item (2) and prismatic blade core (3) from Bed J82BS.

More »

Figure 4 Expand

Figure 5.

Debordants, Bed J82BS. No. 1 shaped into a scraper.

More »

Figure 5 Expand

Table 3.

Frequencies of striking platform types (including blanks and tools).

More »

Table 3 Expand

Table 4.

Frequencies of scar patterns (including blanks and tools).

More »

Table 4 Expand

Table 5.

Frequencies of end termination (including blanks and shaped items).

More »

Table 5 Expand

Table 6.

Metrics (blanks and shaped items).

More »

Table 6 Expand

Table 7.

T-test of metrics (blanks and shaped items).

More »

Table 7 Expand

Figure 6.

An initial débordant (1), a flat surface overpass items (2-3) and a centripetal core (4) from layer R63.

More »

Figure 6 Expand

Table 8.

Core trimming elements.

More »

Table 8 Expand

Table 9.

Frequencies of side of blanks removed from the lateral edges of the cores (blanks and shaped).

More »

Table 9 Expand

Table 10.

Core types.

More »

Table 10 Expand

Table 11.

Metrics of cores.

More »

Table 11 Expand

Figure 7.

A centripetal core from Bed J83B1.

More »

Figure 7 Expand

Figure 8.

Broad surface unidirectional cores from Layer 75, core 1 was shaped into a scraper following discard (Although the items illustrated are not form the studied sample they demonstrate the discussed technological features).

More »

Figure 8 Expand

Figure 9.

Scrapers from Bed J82BS and J83B1. No. 2 was shaped on a core.

More »

Figure 9 Expand

Figure 10.

Scrapers from Bed J82BS shaped on débordant (1), initial débordants (2–3) and NBK-flake (4).

More »

Figure 10 Expand

Figure 11.

Scrapers from Layer R63. No. 1 was also utilized as a core on flake.

More »

Figure 11 Expand

Table 12.

Tools.

More »

Table 12 Expand

Table 13.

Division of scraper types.

More »

Table 13 Expand

Table 14.

Percentage of main blank types transformed into scrapers.

More »

Table 14 Expand

Table 15.

Comparison between blanks and scrapers.

More »

Table 15 Expand

Table 16.

Comparison between blanks and scrapers.

More »

Table 16 Expand

Figure 12.

A schematic representation of the difference perception of reduction between Levallois (1) and the Yabrudian scraper-blank technology (2).

(1) After Boëda et al. [26].

More »

Figure 12 Expand