Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites

• Tao Zhao ,

  Roles Conceptualization, Funding acquisition, Investigation, Methodology, Visualization, Writing – original draft

  * E-mail: zhaotao103085@163.com

  Affiliations Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China, School of Electrical and Information Engineering, North Minzu University, Yinchuan, China

  https://orcid.org/0000-0002-7884-441X

  ⨯
• Xin Dong,

  Roles Data curation, Funding acquisition, Methodology, Software, Visualization, Writing – review & editing

  Affiliation Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China

  ⨯
• Hengfa Wu,

  Roles Formal analysis, Validation

  Affiliation School of Electrical and Information Engineering, North Minzu University, Yinchuan, China

  ⨯
• Yang Gao,

  Roles Formal analysis, Funding acquisition, Validation

  Affiliation Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China

  ⨯
• Ting Lei,

  Roles Supervision, Validation

  Affiliation Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China

  ⨯
• Fei Zheng

  Roles Supervision, Validation

  Affiliation Basic Experimental Teaching and Engineering Training Center, North Minzu University, Yinchuan, China

  ⨯