A strength reliability calculation method of tip relief gears

• Hongbing Wang,

  Roles Conceptualization, Funding acquisition, Methodology, Writing – original draft

  Affiliations Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha, P. R. China, Mechanical Industry Key Laboratory of Medium and Small Sized Joints in Robots, Guangdong Desheng Intelligent Technology Co., Ltd, Foshan, P. R. China

  ⨯
• Jun Xiao,

  Roles Formal analysis, Software, Writing – original draft

  Affiliation Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha, P. R. China

  ⨯
• Lairong Yin,

  Roles Funding acquisition, Project administration, Resources, Supervision

  Affiliation Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha, P. R. China

  ⨯
• Bo Hu ,

  Roles Conceptualization, Funding acquisition, Resources, Supervision, Writing – review & editing

  * E-mail: hubo4956@csust.edu.cn

  Affiliations Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha, P. R. China, Mechanical Industry Key Laboratory of Medium and Small Sized Joints in Robots, Guangdong Desheng Intelligent Technology Co., Ltd, Foshan, P. R. China

  https://orcid.org/0000-0002-2513-4342

  ⨯
• Huihua Liu

  Roles Formal analysis, Resources, Supervision

  Affiliations Mechanical Industry Key Laboratory of Medium and Small Sized Joints in Robots, Guangdong Desheng Intelligent Technology Co., Ltd, Foshan, P. R. China, Beijing Engineering Research Center of Precision Measurement Technology and Instruments, Beijing University of Technology, Beijing, P. R. China

  ⨯