Impact of the dimple indentation depth and location for passive flow control in Blended Wing Body airframe at low and high subsonic speeds

• Haris Ali ,

  Roles Conceptualization, Formal analysis, Investigation, Methodology, Software, Visualization, Writing – original draft, Writing – review & editing

  * E-mail: P119583@siswa.ukm.edu.my, harris.alii256@gmail.com (HA); rasidi@ukm.edu.my (MRR)

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  https://orcid.org/0009-0004-5629-6768

  ⨯
• Mohammad Rasidi Rasani ,

  Roles Conceptualization, Methodology, Resources, Supervision, Validation, Writing – review & editing

  * E-mail: P119583@siswa.ukm.edu.my, harris.alii256@gmail.com (HA); rasidi@ukm.edu.my (MRR)

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  https://orcid.org/0000-0003-4212-1911

  ⨯
• Zambri Harun

  Roles Supervision, Writing – review & editing

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  ⨯