Experimental investigation and prediction of the flexural properties of FDM printed carbon fiber reinforced polyamide parts using optimized RSM and ANN models

• Abdulsalam A. Al-Tamimi ,

  Roles Validation, Visualization, Writing – original draft, Writing – review & editing

  * E-mail: aaaltamimi@ksu.edu.sa (AAA-T); kadric@mef.unsa.ba (EK)

  Affiliation Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia

  https://orcid.org/0000-0001-6195-5634

  ⨯
• Kenan Muhamedagic,

  Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Resources, Software, Validation, Visualization, Writing – original draft, Writing – review & editing

  Affiliation Faculty of Mechanical Engineering, University of Sarajevo, Sarajevo, Bosnia and Herzegovina

  https://orcid.org/0000-0002-6954-0203

  ⨯
• Derzija Begic – Hajdarevic,

  Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Resources, Software, Validation, Visualization, Writing – original draft, Writing – review & editing

  Affiliation Faculty of Mechanical Engineering, University of Sarajevo, Sarajevo, Bosnia and Herzegovina

  https://orcid.org/0000-0001-6024-067X

  ⨯
• Ajdin Vatres,

  Roles Data curation, Methodology, Software, Writing – review & editing

  Affiliation Faculty of Mechanical Engineering, University of Sarajevo, Sarajevo, Bosnia and Herzegovina

  https://orcid.org/0000-0002-8871-2541

  ⨯
• Edin Kadric

  Roles Conceptualization, Methodology, Software, Writing – original draft, Writing – review & editing

  * E-mail: aaaltamimi@ksu.edu.sa (AAA-T); kadric@mef.unsa.ba (EK)

  Affiliation Faculty of Mechanical Engineering, University of Sarajevo, Sarajevo, Bosnia and Herzegovina

  https://orcid.org/0000-0002-5067-5538

  ⨯