CFD based design optimization of dimples induced on Blended Wing Body airframe using the Taguchi method

• Haris Ali ,

  Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Visualization, Writing – original draft, Writing – review & editing

  * E-mail: P119583@siswa.ukm.edu.my, harris.alii256@gmail.com (HA), rasidi@ukm.edu.my (MRR)

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  https://orcid.org/0009-0004-5629-6768

  ⨯
• Mohammad Rasidi Rasani ,

  Roles Methodology, Resources, Supervision, Validation, Writing – review & editing

  * E-mail: P119583@siswa.ukm.edu.my, harris.alii256@gmail.com (HA), rasidi@ukm.edu.my (MRR)

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  ⨯
• Zambri Harun,

  Roles Supervision, Writing – review & editing

  Affiliation Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  ⨯
• Muhammad Ashhad Shahid

  Roles Writing – review & editing

  Affiliation Department of Mathematical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (UKM), Bangi, Selangor, Malaysia

  https://orcid.org/0009-0004-1311-5955

  ⨯