Prediction of porosity, hardness and surface roughness in additive manufactured AlSi10Mg samples

• Fatma Alamri,

  Roles Data curation, Formal analysis, Investigation, Software, Validation, Visualization, Writing – original draft

  Affiliations Management Science and Engineering, Khalifa University, Abu Dhabi, UAE, Advanced Digital & Additive Manufacturing Research Centre, Khalifa University, Abu Dhabi, UAE

  ⨯
• Imad Barsoum ,

  Roles Conceptualization, Data curation, Funding acquisition, Methodology, Resources, Supervision, Writing – review & editing

  * E-mail: imad.barsoum@ku.ac.ae (IB); maher.maalouf@ku.ac.ae (MM)

  Affiliations Advanced Digital & Additive Manufacturing Research Centre, Khalifa University, Abu Dhabi, UAE, Mechanical and Nuclear Engineering, Khalifa University, Abu Dhabi, UAE, Department of Engineering Mechanics, Royal Institute of Technology (KTH), Stockholm, Sweden

  https://orcid.org/0000-0002-9438-9648

  ⨯
• Shrinivas Bojanampati,

  Roles Data curation, Investigation, Resources, Visualization

  Affiliation Mechanical and Nuclear Engineering, Khalifa University, Abu Dhabi, UAE

  https://orcid.org/0000-0003-0596-7790

  ⨯
• Maher Maalouf

  Roles Conceptualization, Methodology, Resources, Supervision, Writing – review & editing

  * E-mail: imad.barsoum@ku.ac.ae (IB); maher.maalouf@ku.ac.ae (MM)

  Affiliations Management Science and Engineering, Khalifa University, Abu Dhabi, UAE, Digital Supply Chain and Operations Research Center, Khalifa University, Abu Dhabi, UAE

  https://orcid.org/0000-0003-0516-6870

  ⨯