Enhancing spinal bone anchor pull-out resistance with an L-shaped anchor

• Esther Paula de Kater,

  Roles Conceptualization, Data curation, Investigation, Methodology, Validation, Writing – original draft, Writing – review & editing

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  https://orcid.org/0000-0002-5342-6721

  ⨯
• Michiel Norbert Blom,

  Roles Data curation, Investigation, Methodology, Validation, Writing – review & editing

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  ⨯
• Teunis Cornelis van Doorn,

  Roles Data curation, Investigation, Methodology, Validation, Writing – review & editing

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  ⨯
• Quoc Huy Tieu,

  Roles Data curation, Investigation, Methodology, Validation, Writing – review & editing

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  ⨯
• David Justin Jager,

  Roles Methodology, Validation, Writing – review & editing

  Affiliation Department of Electronic and Mechanical Support Division, Faculty of Electrical Engineering, Mathematics and Computer Science, Delft University of Technology, Delft, Netherlands

  ⨯
• Aimée Sakes ,

  Roles Conceptualization, Methodology, Writing – review & editing

  * E-mail: A.Sakes@tudelft.nl

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  https://orcid.org/0000-0002-4323-884X

  ⨯
• Paul Breedveld

  Roles Conceptualization, Methodology, Writing – review & editing

  Affiliation Department of BioMechanical Engineering, Bio-Inspired Technology Group, Faculty of Mechanical Engineering, Delft University of Technology, Delft, Netherlands

  ⨯