Effective length correction factor of disc-buckle type scaffolding by considering joint bending stiffness and geometrical size

Jinfeng Dong; Haiqing Liu; Ming Lei; Zimu Chen; Liang Wang; Lixin Guo; Xiangen Gong; Zhou Fang

doi:10.1371/journal.pone.0276340

Loading metrics

Open Access

Peer-reviewed

Research Article

Effective length correction factor of disc-buckle type scaffolding by considering joint bending stiffness and geometrical size

Jinfeng Dong ,

Roles Software, Writing – original draft, Writing – review & editing

* E-mail: djf2252769361@163.com

Affiliation Department of School of Civil Engineering, Liaoning Technical University, Fuxin, Liaoning, China

https://orcid.org/0000-0002-0480-8774

⨯
Haiqing Liu,

Roles Conceptualization, Writing – review & editing

Affiliation Department of School of Civil Engineering, Liaoning Technical University, Fuxin, Liaoning, China
⨯
Ming Lei,

Roles Data curation, Formal analysis, Resources

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯
Zimu Chen,

Roles Conceptualization, Project administration

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯
Liang Wang,

Roles Data curation, Visualization

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯
Lixin Guo,

Roles Data curation, Formal analysis, Visualization

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯
Xiangen Gong,

Roles Investigation, Supervision

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯
Zhou Fang

Roles Conceptualization, Formal analysis, Supervision

Affiliation Department of Northeast Company, China Construction Fifth Engineering Division Corp., Ltd., Shenyang, Liaoning, China
⨯

Effective length correction factor of disc-buckle type scaffolding by considering joint bending stiffness and geometrical size

Jinfeng Dong,
Haiqing Liu,
Ming Lei,
Zimu Chen,
Liang Wang,
Lixin Guo,
Xiangen Gong,
Zhou Fang

Published: October 20, 2022
https://doi.org/10.1371/journal.pone.0276340

Reader Comments (0)

Post a new comment on this article

Subject Areas
?

For more information about PLOS Subject Areas, click here.
We want your feedback. Do these Subject Areas make sense for this article? Click the target next to the incorrect Subject Area and let us know. Thanks for your help!

Stiffness
Is the Subject Area "Stiffness" applicable to this article?

Thanks for your feedback.
Bending
Is the Subject Area "Bending" applicable to this article?

Thanks for your feedback.
Buckling
Is the Subject Area "Buckling" applicable to this article?

Thanks for your feedback.
Moment of inertia
Is the Subject Area "Moment of inertia" applicable to this article?

Thanks for your feedback.
Deformation
Is the Subject Area "Deformation" applicable to this article?

Thanks for your feedback.
Material properties
Is the Subject Area "Material properties" applicable to this article?

Thanks for your feedback.
Geometry
Is the Subject Area "Geometry" applicable to this article?

Thanks for your feedback.
Measurement equipment
Is the Subject Area "Measurement equipment" applicable to this article?

Thanks for your feedback.