Determining optimal laser-beam cutting equipment investment through a robust optimization modeling approach

• Juan Feller ,

  Contributed equally to this work with: Juan Feller, Alejandro F. Mac Cawley, Jorge A. Ramos-Grez, Iván La Fé-Perdomo

  Roles Conceptualization, Formal analysis, Investigation, Writing – original draft, Writing – review & editing

  Affiliation Department of Industrial and Systems Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile

  ⨯
• Alejandro F. Mac Cawley ,

  Contributed equally to this work with: Juan Feller, Alejandro F. Mac Cawley, Jorge A. Ramos-Grez, Iván La Fé-Perdomo

  Roles Conceptualization, Investigation, Methodology, Writing – original draft, Writing – review & editing

  * E-mail: amac@ing.puc.cl

  Affiliation Department of Industrial and Systems Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile

  https://orcid.org/0000-0002-4848-4732

  ⨯
• Jorge A. Ramos-Grez ,

  Contributed equally to this work with: Juan Feller, Alejandro F. Mac Cawley, Jorge A. Ramos-Grez, Iván La Fé-Perdomo

  Roles Conceptualization, Investigation

  Affiliation Department of Mechanical and Metallurgical Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile

  https://orcid.org/0000-0002-9293-3275

  ⨯
• Iván La Fé-Perdomo

  Contributed equally to this work with: Juan Feller, Alejandro F. Mac Cawley, Jorge A. Ramos-Grez, Iván La Fé-Perdomo

  Roles Writing – original draft, Writing – review & editing

  Affiliations Department of Mechanical and Metallurgical Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile, Centre for Advanced and Sustainable Manufacturing Studies, University of Matanzas, Matanzas, Cuba

  https://orcid.org/0000-0002-4042-1534

  ⨯