A new method to produce T-shaped tubular fittings with experimental and simulation results

• Atef M. Ghaleb,

  Roles Conceptualization, Data curation, Formal analysis, Methodology, Software, Writing – original draft

  Affiliation King Saud University, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia

  ⨯
• Mohamed A. Saleh,

  Roles Conceptualization, Data curation, Formal analysis, Methodology, Software

  Affiliation Private consultant, Cairo, Egypt

  ⨯
• Adham E. Ragab ,

  Roles Conceptualization, Data curation, Methodology, Writing – original draft, Writing – review & editing

  * E-mail: aragab@KSU.EDU.SA

  Affiliation King Saud University, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia

  http://orcid.org/0000-0002-7339-6419

  ⨯
• Abdulmajeed Dabwan,

  Roles Conceptualization, Data curation, Formal analysis, Validation, Writing – review & editing

  Affiliation King Saud University, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia

  ⨯
• Tamer M. Khalaf,

  Roles Validation, Writing – original draft, Writing – review & editing

  Affiliations King Saud University, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia, Department of Mechanical Engineering, College of Engineering, Al-Azhar University, Cairo, Egypt

  http://orcid.org/0000-0002-0473-2036

  ⨯
• Usama Umer

  Roles Methodology, Software

  Affiliation Advance Manufacturing Institute, College of Engineering, Saudi Arabia

  http://orcid.org/0000-0001-8715-7905

  ⨯