Evaluation of adaptation of the polylactic acid pattern of maxillary complete dentures fabricated by fused deposition modelling technology: A pilot study

• Kehui Deng,

  Roles Data curation, Software, Writing – original draft, Writing – review & editing

  Affiliations Center of Digital Dentistry, Peking University School and Hospital of Stomatology, Beijing, China, Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Research Center of Engineering and Technology for Digital Dentistry of Ministry of Health, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  ⨯
• Hu Chen,

  Roles Formal analysis, Investigation, Software, Supervision

  Affiliations Center of Digital Dentistry, Peking University School and Hospital of Stomatology, Beijing, China, Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Research Center of Engineering and Technology for Digital Dentistry of Ministry of Health, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  ⨯
• Yijiao Zhao,

  Roles Software, Validation

  Affiliations Center of Digital Dentistry, Peking University School and Hospital of Stomatology, Beijing, China, Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Research Center of Engineering and Technology for Digital Dentistry of Ministry of Health, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  ⨯
• Yongsheng Zhou,

  Roles Resources, Supervision

  Affiliations Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  ⨯
• Yong Wang ,

  Contributed equally to this work with: Yong Wang, Yuchun Sun

  Roles Conceptualization, Project administration, Supervision, Validation

  * E-mail: polarshining@163.com (YCS); kqcadc@bjmu.edu.cn (YW)

  Affiliations Center of Digital Dentistry, Peking University School and Hospital of Stomatology, Beijing, China, Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Research Center of Engineering and Technology for Digital Dentistry of Ministry of Health, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  ⨯
• Yuchun Sun

  Contributed equally to this work with: Yong Wang, Yuchun Sun

  Roles Conceptualization, Methodology, Project administration, Resources

  * E-mail: polarshining@163.com (YCS); kqcadc@bjmu.edu.cn (YW)

  Affiliations Center of Digital Dentistry, Peking University School and Hospital of Stomatology, Beijing, China, Department of Prosthodontics, Peking University School and Hospital of Stomatology, Beijing, China, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing, China, Research Center of Engineering and Technology for Digital Dentistry of Ministry of Health, Beijing, China, Beijing Key Laboratory of Digital Stomatology, Beijing, China

  http://orcid.org/0000-0002-3424-5028

  ⨯