Patient-specific musculoskeletal modeling of the hip joint for preoperative planning of total hip arthroplasty: A validation study based on in vivo measurements

• Maximilian C. M. Fischer ,

  Contributed equally to this work with: Maximilian C. M. Fischer, Jörg Eschweiler

  Roles Data curation, Formal analysis, Investigation, Methodology, Resources, Software, Validation, Visualization, Writing – original draft

  * E-mail: m.fischer@hia.rwth-aachen.de

  Affiliation Chair of Medical Engineering, Helmholtz-Institute for Biomedical Engineering, RWTH Aachen University, Aachen, Germany

  http://orcid.org/0000-0001-7832-5671

  ⨯
• Jörg Eschweiler ,

  Contributed equally to this work with: Maximilian C. M. Fischer, Jörg Eschweiler

  Roles Conceptualization, Project administration, Resources, Supervision, Writing – review & editing

  Affiliations Chair of Medical Engineering, Helmholtz-Institute for Biomedical Engineering, RWTH Aachen University, Aachen, Germany, Department for Orthopaedic Surgery, University Hospital RWTH Aachen, Germany

  ⨯
• Fabian Schick,

  Roles Software

  Affiliation Chair of Medical Engineering, Helmholtz-Institute for Biomedical Engineering, RWTH Aachen University, Aachen, Germany

  ⨯
• Malte Asseln,

  Roles Resources, Writing – review & editing

  Affiliation Chair of Medical Engineering, Helmholtz-Institute for Biomedical Engineering, RWTH Aachen University, Aachen, Germany

  ⨯
• Philipp Damm,

  Roles Data curation, Resources, Writing – review & editing

  Affiliation Julius Wolff Institute for Biomechanics and Musculoskeletal Regeneration, Charité - Universitätsmedizin Berlin, Germany

  ⨯
• Klaus Radermacher

  Roles Project administration, Supervision, Writing – review & editing

  Affiliation Chair of Medical Engineering, Helmholtz-Institute for Biomedical Engineering, RWTH Aachen University, Aachen, Germany

  ⨯