Microstructure characterization and corrosion resistance properties of Pb-Sb alloys for lead acid battery spine produced by different casting methods

• Asiful H. Seikh ,

  Contributed equally to this work with: Asiful H. Seikh, El-Sayed M. Sherif, Sohail M. A. Khan Mohammed

  Roles Conceptualization, Data curation, Formal analysis, Investigation, Resources, Validation, Visualization, Writing – original draft, Writing – review & editing

  Affiliation Centre of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh, Saudi Arabia

  ⨯
• El-Sayed M. Sherif ,

  Contributed equally to this work with: Asiful H. Seikh, El-Sayed M. Sherif, Sohail M. A. Khan Mohammed

  Roles Formal analysis, Funding acquisition, Investigation, Methodology, Software, Supervision, Validation, Visualization, Writing – review & editing

  * E-mail: esherif@ksu.edu.sa

  Affiliation Centre of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh, Saudi Arabia

  http://orcid.org/0000-0002-8108-6074

  ⨯
• Sohail M. A. Khan Mohammed ,

  Contributed equally to this work with: Asiful H. Seikh, El-Sayed M. Sherif, Sohail M. A. Khan Mohammed

  Roles Conceptualization, Data curation, Software, Visualization, Writing – original draft

  Affiliation Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, Ontario, Canada

  ⨯
• Muneer Baig ,

  Roles Investigation, Validation, Visualization, Writing – original draft

  ¶‡ These authors also contributed equally to this work.

  Affiliation Engineering Management Department, Prince Sultan University, Riyadh, Kingdom of Saudi Arabia

  ⨯
• Mohammad Asif Alam ,

  Roles Data curation, Investigation, Methodology, Validation, Visualization

  ¶‡ These authors also contributed equally to this work.

  Affiliation Centre of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh, Saudi Arabia

  ⨯
• Nabeel Alharthi

  Roles Data curation, Formal analysis, Methodology, Resources, Supervision, Validation, Visualization

  ¶‡ These authors also contributed equally to this work.

  Affiliations Centre of Excellence for Research in Engineering Materials (CEREM), King Saud University, Riyadh, Saudi Arabia, Mechanical Engineering Department, College of Engineering, King Saud University, Riyadh, Saudi Arabia

  ⨯