Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication

Alex J. L. Morgan; Lorena Hidalgo San Jose; William D. Jamieson; Jennifer M. Wymant; Bing Song; Phil Stephens; David A. Barrow; Oliver K. Castell

doi:10.1371/journal.pone.0152023

Loading metrics

Open Access

Peer-reviewed

Research Article

Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication

Alex J. L. Morgan ,

* E-mail: morganaj3@cardiff.ac.uk

Affiliation Cardiff School of Engineering, Cardiff University, Queen’s Building, The Parade, Cardiff, CF24 3AA, United Kingdom
⨯
Lorena Hidalgo San Jose,

Affiliations Cardiff School of Engineering, Cardiff University, Queen’s Building, The Parade, Cardiff, CF24 3AA, United Kingdom, Oral and Biomedical Sciences, Cardiff Institute of Tissue Engineering and Repair, School of Dentistry, Cardiff University, Heath Park, Cardiff, CF14 4XY, United Kingdom
⨯
William D. Jamieson,

Affiliation School of Pharmacy and Pharmaceutical Sciences, Cardiff University, Redwood Building, King Edward VII Ave, Cardiff, CF10 3NB, United Kingdom
⨯
Jennifer M. Wymant,

Affiliation School of Pharmacy and Pharmaceutical Sciences, Cardiff University, Redwood Building, King Edward VII Ave, Cardiff, CF10 3NB, United Kingdom
⨯
Bing Song,

Affiliation Oral and Biomedical Sciences, Cardiff Institute of Tissue Engineering and Repair, School of Dentistry, Cardiff University, Heath Park, Cardiff, CF14 4XY, United Kingdom
⨯
Phil Stephens,

Affiliation Oral and Biomedical Sciences, Cardiff Institute of Tissue Engineering and Repair, School of Dentistry, Cardiff University, Heath Park, Cardiff, CF14 4XY, United Kingdom
⨯
David A. Barrow ,

Contributed equally to this work with: David A. Barrow, Oliver K. Castell

Affiliation Cardiff School of Engineering, Cardiff University, Queen’s Building, The Parade, Cardiff, CF24 3AA, United Kingdom
⨯
Oliver K. Castell

Contributed equally to this work with: David A. Barrow, Oliver K. Castell

Affiliation School of Pharmacy and Pharmaceutical Sciences, Cardiff University, Redwood Building, King Edward VII Ave, Cardiff, CF10 3NB, United Kingdom
⨯

Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication

Alex J. L. Morgan,
Lorena Hidalgo San Jose,
William D. Jamieson,
Jennifer M. Wymant,
Bing Song,
Phil Stephens,
David A. Barrow,
Oliver K. Castell

Published: April 6, 2016
https://doi.org/10.1371/journal.pone.0152023

Reader Comments (0)

Post a new comment on this article

Subject Areas
?

For more information about PLOS Subject Areas, click here.
We want your feedback. Do these Subject Areas make sense for this article? Click the target next to the incorrect Subject Area and let us know. Thanks for your help!

3D printing
Is the Subject Area "3D printing" applicable to this article?

Thanks for your feedback.
Microfluidics
Is the Subject Area "Microfluidics" applicable to this article?

Thanks for your feedback.
Oils
Is the Subject Area "Oils" applicable to this article?

Thanks for your feedback.
Flow rate
Is the Subject Area "Flow rate" applicable to this article?

Thanks for your feedback.
Optical materials
Is the Subject Area "Optical materials" applicable to this article?

Thanks for your feedback.
Optimization
Is the Subject Area "Optimization" applicable to this article?

Thanks for your feedback.
Microencapsulation
Is the Subject Area "Microencapsulation" applicable to this article?

Thanks for your feedback.
Fluid flow
Is the Subject Area "Fluid flow" applicable to this article?

Thanks for your feedback.