PCLM-D-22-00095

Deciphering small business community disaster support using machine learning

PLOS Climate

Dear Dr. Pierel,

Thank you for submitting your manuscript to PLOS Climate. After careful consideration, we feel that it has merit but does not fully meet PLOS Climate’s publication criteria as it currently stands. Therefore, we invite you to submit a revised version of the manuscript that addresses the points raised during the review process.

Please submit your revised manuscript by Dec 28 2022 11:59PM. If you will need more time than this to complete your revisions, please reply to this message or contact the journal office at climate@plos.org. When you're ready to submit your revision, log on to https://www.editorialmanager.com/pclm/ and select the 'Submissions Needing Revision' folder to locate your manuscript file.

Please include the following items when submitting your revised manuscript:

• A rebuttal letter that responds to each point raised by the editor and reviewer(s). You should upload this letter as a separate file labeled 'Response to Reviewers'.
• A marked-up copy of your manuscript that highlights changes made to the original version. You should upload this as a separate file labeled 'Revised Manuscript with Track Changes'.
• An unmarked version of your revised paper without tracked changes. You should upload this as a separate file labeled 'Manuscript'.

Guidelines for resubmitting your figure files are available below the reviewer comments at the end of this letter.

We look forward to receiving your revised manuscript.

Kind regards,

Bidhubhusan Mahapatra, Ph.D.

Academic Editor

PLOS Climate

Journal Requirements:

1. Please review your reference list to ensure that it is complete and correct. If you have cited papers that have been retracted, please include the rationale for doing so in the manuscript text, or remove these references and replace them with relevant current references. Any changes to the reference list should be mentioned in the rebuttal letter that accompanies your revised manuscript. If you need to cite a retracted article, indicate the article’s retracted status in the References list and also include a citation and full reference for the retraction notice.

2. Please amend your detailed Financial Disclosure statement. This is published with the article. It must therefore be completed in full sentences and contain the exact wording you wish to be published.

a. State what role the funders took in the study. If the funders had no role in your study, please state: “The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.”

b. If any authors received a salary from any of your funders, please state which authors and which funders.

If you did not receive any funding for this study, please simply state: “The authors received no specific funding for this work.”

3. We ask that a manuscript source file is provided at Revision. Please upload your manuscript file as a .doc, .docx, .rtf or .tex.

4. We have noticed that you have a list of Supporting Information legends (S1, S2, S3 and S4) in your manuscript. However, there are no corresponding files uploaded to the submission. Please upload them as separate files with the item type 'Supporting Information'. 

5. Figure 1: please (a) provide a direct link to the base layer of the map (i.e., the country or region border shape) and ensure this is also included in the figure legend; and (b) provide a link to the terms of use / license information for the base layer image or shapefile. We cannot publish proprietary or copyrighted maps (e.g. Google Maps, Mapquest) and the terms of use for your map base layer must be compatible with our CC-BY 4.0 license. 

Note: if you created the map in a software program like R or ArcGIS, please locate and indicate the source of the basemap shapefile onto which data has been plotted.

If your map was obtained from a copyrighted source please amend the figure so that the base map used is from an openly available source. Alternatively, please provide explicit written permission from the copyright holder granting you the right to publish the material under our CC-BY 4.0 license.

Please note that the following CC BY licenses are compatible with PLOS license: CC BY 4.0, CC BY 2.0 and CC BY 3.0, meanwhile such licenses as CC BY-ND 3.0 and others are not compatible due to additional restrictions. 

If you are unsure whether you can use a map or not, please do reach out and we will be able to help you. The following websites are good examples of where you can source open access or public domain maps: 

* U.S. Geological Survey (USGS) - All maps are in the public domain. (http://www.usgs.gov) 

* PlaniGlobe - All maps are published under a Creative Commons license so please cite “PlaniGlobe, http://www.planiglobe.com, CC BY 2.0” in the image credit after the caption. (http://www.planiglobe.com/?lang=enl) 

* Natural Earth - All maps are public domain. (http://www.naturalearthdata.com/about/terms-of-use/)

Additional Editor Comments (if provided):

[Note: HTML markup is below. Please do not edit.]

Reviewers' comments:

Reviewer's Responses to Questions

Comments to the Author

1. Does this manuscript meet PLOS Climate’s publication criteria? Is the manuscript technically sound, and do the data support the conclusions? The manuscript must describe methodologically and ethically rigorous research with conclusions that are appropriately drawn based on the data presented.

Reviewer #1: Yes

Reviewer #2: Partly

**********

2. Has the statistical analysis been performed appropriately and rigorously?

Reviewer #1: Yes

Reviewer #2: I don't know

**********

3. Have the authors made all data underlying the findings in their manuscript fully available (please refer to the Data Availability Statement at the start of the manuscript PDF file)?

The PLOS Data policy requires authors to make all data underlying the findings described in their manuscript fully available without restriction, with rare exception. The data should be provided as part of the manuscript or its supporting information, or deposited to a public repository. For example, in addition to summary statistics, the data points behind means, medians and variance measures should be available. If there are restrictions on publicly sharing data—e.g. participant privacy or use of data from a third party—those must be specified.

Reviewer #1: Yes

Reviewer #2: Yes

**********

4. Is the manuscript presented in an intelligible fashion and written in standard English?

PLOS Climate does not copyedit accepted manuscripts, so the language in submitted articles must be clear, correct, and unambiguous. Any typographical or grammatical errors should be corrected at revision, so please note any specific errors here.

Reviewer #1: Yes

Reviewer #2: No

**********

5. Review Comments to the Author

Please use the space provided to explain your answers to the questions above. You may also include additional comments for the author, including concerns about dual publication, research ethics, or publication ethics. (Please upload your review as an attachment if it exceeds 20,000 characters)

Reviewer #1: The Authors have performed a very relevant study and have used data science concepts which appeal to a wider audience. The reviewer finds the paper very well written and easy to understand, however, few comments have been provided in the attachment that will clarify certain questions that might arise in the readers' minds.

Reviewer #2: I found topic of the article interesting and do believe it is a contribution to the literature. I would encourage the authors to note the literature on community reciprocity by Miller and Besser (2000) and Park and Campbell (2017) as examples to strengthen their arguments of the importance of small businesses to community resilience.

The article would benefit from professional editing as several sentences are confusing and there are errors throughout; for example, line 238 there is a question mark where there should be a period. Line 267 there is an "l" missing in social capital.

I found the methods confusing in that it was not clear whether the authors actually merged the two datasets. It seemed that they implied they did, but it's not clear. If they did merge the datasets, why? Why not present the results separately? Especially as they are different variables used in the surveys and the results seem to imply that both surveys were the same. That some variables are only in the Carolinas survey becomes clear in the supplemental material.

**********

6. PLOS authors have the option to publish the peer review history of their article (what does this mean?). If published, this will include your full peer review and any attached files.

Do you want your identity to be public for this peer review? If you choose “no”, your identity will remain anonymous but your review may still be made public.

For information about this choice, including consent withdrawal, please see our Privacy Policy.

Reviewer #1: Yes: Trisha Chaudhuri

Reviewer #2: No

**********

[NOTE: If reviewer comments were submitted as an attachment file, they will be attached to this email and accessible via the submission site. Please log into your account, locate the manuscript record, and check for the action link "View Attachments". If this link does not appear, there are no attachment files.]

While revising your submission, please upload your figure files to the Preflight Analysis and Conversion Engine (PACE) digital diagnostic tool, https://pacev2.apexcovantage.com/. PACE helps ensure that figures meet PLOS requirements. To use PACE, you must first register as a user. Registration is free. Then, login and navigate to the UPLOAD tab, where you will find detailed instructions on how to use the tool. If you encounter any issues or have any questions when using PACE, please email PLOS at figures@plos.org. Please note that Supporting Information files do not need this step.

Attachments

Attachment

Submitted filename: PCLM-D-22-00095 - TC.pdf

Deciphering small business community disaster support using machine learning

PCLM-D-22-00095R1

Dear Dr. Pierel,

We are pleased to inform you that your manuscript 'Deciphering small business community disaster support using machine learning' has been provisionally accepted for publication in PLOS Climate.

Before your manuscript can be formally accepted you will need to complete some formatting changes, which you will receive in a follow-up email from a member of our team. 

Please note that your manuscript will not be scheduled for publication until you have made the required changes, so a swift response is appreciated.

IMPORTANT: The editorial review process is now complete. PLOS will only permit corrections to spelling, formatting or significant scientific errors from this point onwards. Requests for major changes, or any which affect the scientific understanding of your work, will cause delays to the publication date of your manuscript.

If your institution or institutions have a press office, please notify them about your upcoming paper to help maximize its impact. If they'll be preparing press materials, please inform our press team as soon as possible -- no later than 48 hours after receiving the formal acceptance. Your manuscript will remain under strict press embargo until 2 pm Eastern Time on the date of publication. For more information, please contact climate@plos.org.

Thank you again for supporting Open Access publishing; we are looking forward to publishing your work in PLOS Climate.

Best regards,

Bidhubhusan Mahapatra, Ph.D.

Academic Editor

PLOS Climate

***********************************************************

Reviewer Comments (if any, and for reference):