Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

A New Brachylophosaurin Hadrosaur (Dinosauria: Ornithischia) with an Intermediate Nasal Crest from the Campanian Judith River Formation of Northcentral Montana

  • Elizabeth A. Freedman Fowler ,

    eafreedman@gmail.com

    Affiliations Museum of the Rockies, Montana State University, Bozeman, Montana, United States of America, Department of Earth Sciences, Montana State University, Bozeman, Montana, United States of America

  • John R. Horner

    Affiliations Museum of the Rockies, Montana State University, Bozeman, Montana, United States of America, Department of Earth Sciences, Montana State University, Bozeman, Montana, United States of America

Abstract

Background

Brachylophosaurini is a clade of hadrosaurine dinosaurs currently known from the Campanian (Late Cretaceous) of North America. Its members include: Acristavus gagslarsoni, which lacks a nasal crest; Brachylophosaurus canadensis, which possesses a flat paddle-shaped nasal crest projecting posteriorly over the dorsal skull roof; and Maiasaura peeblesorum, which possesses a dorsally-projecting nasofrontal crest. Acristavus, from the lower Two Medicine Formation of Montana (~81–80 Ma), is hypothesized to be the ancestral member of the clade. Brachylophosaurus specimens are from the middle Oldman Formation of Alberta and equivalent beds in the Judith River Formation of Montana; the upper Oldman Formation is dated 77.8 Ma.

Methodology/Principal Findings

A new brachylophosaurin hadrosaur, Probrachylophosaurus bergei (gen. et sp. nov.) is described and phylogenetically analyzed based on the skull and postcranium of a large individual from the Judith River Formation of northcentral Montana (79.8–79.5 Ma); the horizon is equivalent to the lower Oldman Formation of Alberta. Cranial morphology of Probrachylophosaurus, most notably the nasal crest, is intermediate between Acristavus and Brachylophosaurus. In Brachylophosaurus, the nasal crest lengthens and flattens ontogenetically, covering the supratemporal fenestrae in large adults. The smaller nasal crest of Probrachylophosaurus is strongly triangular in cross section and only minimally overhangs the supratemporal fenestrae, similar to an ontogenetically earlier stage of Brachylophosaurus. Sutural fusion and tibial osteohistology reveal that the holotype of Probrachylophosaurus was relatively more mature than a similarly large Brachylophosaurus specimen; thus, Probrachylophosaurus is not simply an immature Brachylophosaurus.

Conclusions/Significance

The small triangular posteriorly oriented nasal crest of Probrachylophosaurus is proposed to represent a transitional nasal morphology between that of a non-crested ancestor such as Acristavus and the large flat posteriorly oriented nasal crest of adult Brachylophosaurus. Because Probrachylophosaurus is stratigraphically and morphologically intermediate between these taxa, Probrachylophosaurus is hypothesized to be an intermediate member of the Acristavus-Brachylophosaurus evolutionary lineage.

Introduction

Hadrosaurid dinosaurs were prominent members of Late Cretaceous Campanian ecosystems of North America, with an abundance of diverse taxa. The later portion of the Campanian included solid-crested hadrosaurines coexisting with hollow-crested lambeosaurines, but earlier in the Campanian, hadrosaurines were the most abundant hadrosaurids (See Materials and Methods section regarding use of the term “hadrosaurine”. Extensive bonebeds in the Two Medicine and Judith River Formations of Montana preserve numerous individuals of hadrosaurine taxa such as Maiasaura peeblesorum and Brachylophosaurus canadensis [1, 2]. These genera are members of the clade Brachylophosaurini, which includes the recently described basal taxon Acristavus gagslarsoni [3].

Acristavus, named for its lack of nasal crest, is found in the lower Two Medicine Formation of Montana (Fig 1; [3]). Maiasaura and Brachylophosaurus are more typical hadrosaurines in having prominent nasal crests, and are found stratigraphically higher than Acristavus. Maiasaura, with its dorsally projecting nasofrontal crest, is known from the upper half of the Two Medicine Formation [46]. Brachylophosaurus canadensis specimens have posteriorly oriented flat paddle-shaped nasal crests, and are likely all from the Comrey Sandstone Zone of the middle Oldman Formation of Alberta and its Judith River Formation equivalent in Montana [7, 8]. A previously published taxon from lower Oldman-equivalent deposits, “Brachylophosaurus goodwini” [9], has been referred to Brachylophosaurus canadensis [1] and is here considered referable only to Brachylophosaurini indet. due to the state of preservation of the holotype and the lack of a preserved nasal crest.

thumbnail
Fig 1. Generalized regional cross section of the Judith River Formation and stratigraphic equivalents, with brachylophosaurin distribution.

Members of Brachylophosaurini indicated in blue: Acristavus gagslarsoni, Probrachylophosaurus bergei gen. et sp. nov., Brachylophosaurus canadensis, and Maiasaura peeblesorum. Radiometric dates are indicated in dark gray, and have been recalibrated to the Fish Canyon sanidine standard (28.305 +/- 0.036 Ma) of Renne et al. [10] from the originally published values [1115]; see text and Table 1 for further recalibration details.

https://doi.org/10.1371/journal.pone.0141304.g001

Stratigraphically intermediate deposits between Acristavus and Brachylophosaurus include the lower Judith River Formation of Montana, and the corresponding Foremost and lower Oldman Formations of Alberta. Although several partial skeletons have been excavated from the Foremost and lower Oldman Formations and their Judith River Formation equivalents, no species-level diagnostic hadrosaurid material has previously been collected near the Foremost-Oldman Formation boundary, resulting in a gap in our knowledge of Campanian hadrosaur evolution. This paper describes MOR 2919, a specimen with a relatively complete skull from this stratigraphic interval in Kennedy Coulee, northcentral Montana, which fills in the gap with a transitional morphology between the known taxa Acristavus gagslarsoni and Brachylophosaurus canadensis.

Institutional Abbreviations

CMN/NMC, Canadian Museum of Nature, formerly National Museum of Canada, Ottawa, Ontario, Canada; FMNH, Field Museum of Natural History, Chicago, Illinois, U.S.A.; GPDM, Great Plains Dinosaur Museum, Malta, Montana, U.S.A.; OTM, Old Trail Museum, Choteau, Montana, U.S.A.; MOR, Museum of the Rockies, Bozeman, Montana, U.S.A.; ROM, Royal Ontario Museum, Toronto, Ontario, Canada; TMP, Royal Tyrrell Museum of Palaeontology, Drumheller, Alberta, Canada; UCMP, University of California Museum of Paleontology, Berkeley, California, U.S.A.; UMNHVP, Natural History Museum of Utah Vertebrate Paleontology, Salt Lake City, Utah, U.S.A.; YPM-PU, Princeton University collection at the Yale Peabody Museum, New Haven, Connecticut, U.S.A.

Study Areas

Kennedy Coulee is a richly fossiliferous exposure of the Judith River Formation (Late Cretaceous: Campanian) located in Hill County, northcentral Montana, and joins the valley of the Milk River near the USA-Canada border (Fig 2). In Alberta, Judith River Formation equivalent deposits are named the Belly River Group, and include the Foremost, Oldman, and Dinosaur Park Formations (Fig 1). Although the Montanan Judith River Formation is not subdivided into the formal units of the Belly River Group, the depositional sequences that created the Foremost, Oldman, and Dinosaur Park Formations can be identified in Montana outcrop. Using the terminology of these Canadian formations and their members enables detailed stratigraphic placement of fossiliferous localities, facilitating comparison of the hadrosaurids and other fauna over time.

thumbnail
Fig 2. Map of Brachylophosaurini localities in Montana and southern Alberta.

Inset shows North America in dark grey with Montana and southern Alberta in light grey. Kennedy Coulee, locality of Probrachylophosaurus bergei gen. et sp. nov., marked with red star. Other Brachylophosaurini localities indicated with black dots: Malta, Brachylophosaurus canadensis; Onefour, B. canadensis; DPP (Dinosaur Provincial Park), B. canadensis; Choteau, Acristavus gagslarsoni and Maiasaura peeblesorum.

https://doi.org/10.1371/journal.pone.0141304.g002

Exposures in and near Kennedy Coulee are equivalent to the uppermost Foremost Formation and lowermost Oldman Formation of Alberta, according to multiple lines of evidence: lithologic, radiometric, and biostratigraphic. The base of the coulee exposes a thick coal, the Marker A Coal, equivalent to the top of the Taber Coal Zone of the Foremost Formation, capped by a white-gray amalgamated channel sandstone equivalent to the Herronton Sandstone Zone at the top of the Foremost Formation (sensu [13]). The upper portion of Kennedy Coulee, where MOR 2919 was collected, is dominated by mudstones and corresponds to Unit 1 (the lowest unit) of the Oldman Formation. The ceratopsian Medusaceratops was also collected from this upper mudstone zone of Kennedy Coulee [16].

To facilitate comparison of radiometric dates from various formations and publications, all relevant dates were recalibrated to the Fish Canyon sanidine standard of 28.305 ± 0.036 Ma using the method of Renne et al. [10]. Published and recalibrated dates for relevant portions of the Judith River Formation, Belly River Group, Two Medicine Formation, and Wahweap Formation are listed in Table 1, and recalibrated dates are plotted on Fig 1.

Published radiometric dates from the upper mudstone zone and lower coal zone of Kennedy Coulee constrain the age of MOR 2919 between 78.5 +/- 0.2 Ma and 78.2 +/- 0.2 Ma according to the old standard of 520.4 +/- 1.7 Ma for MMhb-1 [11]. Conversion and recalibration to the Fish Canyon sanidine standard mentioned above adjusts these dates to 79.8 +/- 0.2 Ma and 79.5 +/- 0.2 Ma. The proposed stratigraphic position of Kennedy Coulee is consistent with its radiometric age within the range of recalibrated dates from the lower Foremost (80.45 +/- 0.16 Ma) and upper Oldman Formations (77.76 +/- 0.51 Ma) of Alberta [12, 13].

Ray teeth collected from microsites throughout Kennedy Coulee, from the Herronton Sandstone to Unit 1 of the Oldman Formation, possess smooth-sided crowns, and are thus referable to Pseudomyledaphus sp. (S1 Text, S1 Fig) [20]. In Alberta, Pseudomyledaphus sp. are only found in the Foremost and lowermost Oldman Formations [2022], supporting the assignment of MOR 2919’s locality to the lowermost Oldman Formation.

Brachylophosaurus canadensis specimens collected in Alberta all likely originate from the Oldman Formation (Table 2). The holotype of B. canadensis, CMN 8893, was collected in 1936 from the Comrey Sandstone Zone (Unit 2) of the middle Oldman Formation near the Red Deer River, within what is now Dinosaur Provincial Park ([23]; D. A. Eberth personal communication 2011). A partial skull, FMNH PR 862, had also been collected in Dinosaur Provincial Park in 1922 [24]. FMNH PR 862 was more recently erroneously associated with the Two Medicine Formation [1, 25], but outcrops along the Red Deer River include the Oldman and Dinosaur Park Formations, and so FMNH PR 862 was likely collected from a similar stratigraphic level as the holotype. A third skull and partial skeleton, TMP 1990.104.001, was collected from a sandstone at an unspecified level of the Oldman Formation near the Milk River outside of the towns of Onefour and Manyberries [7]. Of these three specimens, only the holotype is confirmed to be from the Comrey Sandstone Zone, but there is no evidence to suggest that the other two specimens originate from a different horizon.

thumbnail
Table 2. List of Brachylophosaurini specimens examined in this paper.

https://doi.org/10.1371/journal.pone.0141304.t002

Although Alberta was the source of the holotype, the majority of known Brachylophosaurus canadensis specimens, including a complete adult skeleton (MOR 794), an articulated subadult with skin impressions (JRF 115), and a bonebed containing individuals of various sizes (MOR 1071), were collected from the Judith River Formation exposed near Malta, Montana. Malta is 200 km east of Kennedy Coulee, and thus more distal along the depositional wedge and closer to the Western Interior Seaway. In the Malta area, the base of the Judith River Formation is the shoreface Parkman Sandstone, which is overlain by tan colored, quartz-rich sandstones [8] equivalent to the Comrey Sandstone Zone of the middle Oldman Formation. Strata equivalent to the Foremost Formation and lower Oldman Formation are not present in the distal wedge deposits of Malta (Fig 1). Ray teeth collected with MOR 1071 are referable to Myledaphus bipartitus (S1 Text), which, in Alberta, are only found in the Comrey Sandstone Zone and higher units [21], supporting the assignment of the Malta B. canadensis localities to the Comrey Sandstone Zone of the Oldman Formation. Thus, Kennedy Coulee and MOR 2919 are stratigraphically older than Brachylophosaurus canadensis specimens from Alberta and Malta, Montana.

A second species of Brachylophosaurus, B. goodwini, was described from Kennedy Coulee, Hill County, northcentral Montana [9]. The cranial material of the holotype, UCMP 130139, was fragmentary and missing the nasal crest, and so was deemed undiagnostic and referred to B. canadensis [1, 23]. However, due to the lack of a preserved nasal crest as well as its severe frontal depressions, UCMP 130139 cannot be confidently referred to either B. canadensis or the new genus described here, and is assigned to Brachylophosaurini indet. (see Discussion).

Materials and Methods

MOR 2919 was collected by Museum of the Rockies and University of California Museum of Paleontology crews using standard paleontology field techniques [27] on privately owned land. MOR 2919 was generously donated to the Museum of the Rockies by Nolan and Cheryl Fladstol and John and Claire Wendland. No permits were required for the described study, which complied with all relevant regulations.

Terminology in this paper follows traditional conventions and definitions of Hadrosauridae and Hadrosaurinae [28] rather than the proposed alternate names of Saurolophidae and Saurolophinae [29] for reasons of taxonomic stability as detailed in Gates et al. [3].

MOR 2919 was compared morphologically to other hadrosaurine specimens and casts at MOR, ROM, TMP, and UCMP, as well as published descriptions. Measurements were taken directly from the specimens or casts using a tape measure or digital calipers.

To determine the phylogenetic relationships of MOR 2919 within Hadrosaurinae, the specimen was coded into the phylogenetic matrices of Gates et al. [3] and Prieto-Márquez [29]. These matrices were selected because Gates et al. [3] is the description of Acristavus, one of the taxa most morphologically similar to MOR 2919, and Prieto-Márquez [29] is a landmark study, the largest, most comprehensive analysis of all Hadrosauridae to that date. The matrices from both studies were used, because although they both have origins in the Horner et al. [28] matrix, the Gates et al. [3] matrix alters few characters, whereas the Prieto-Márquez [29] matrix substantially expands the character list, yielding two extremely different matrices. If both matrices yield the same placement of MOR 2919, then its phylogienetic position can be considered very well supported.

To simplify the analyses and focus on relationships within the clade of interest (Brachylophosaurini), as well as to make the taxon lists of these matrices as similar as possible, most lambeosaurine and basal hadrosauroid taxa were removed from Prieto-Márquez’s [29] and Gates et al.’s [3] matrices. Relationships within lambeosaurines and basal hadrosauroids are thoroughly investigated in Prieto-Márquez [29] and need not be repeated here. Iguanodon bernissartensis was retained for use as the outgroup, consistent with Prieto-Márquez [29] and Gates et al. [3]. Bactrosaurus johnsoni was retained as a representative hadrosauroid because it is the most complete hadrosauroid in the matrices. Hadrosaurus foulkii, although not included in the Gates et al. [3] matrix, was retained in the Prieto-Márquez [29] matrix due to the taxon’s variable position in different phylogenetic analyses and its importance in defining the terms Hadrosauridae and Hadrosaurinae. Corythosaurus casuarius was retained as a representative lambeosaurine, consistent with Gates et al. [3]. Several incomplete hadrosaurine taxa (coded with a high percentage of “?”) outside of Brachylophosaurini were removed from both matrices to simplify the analysis and improve resolution of Brachylophosaurini and the other major, well-defined hadrosaurine clades. The removed taxa were: Barsboldia sicinskii, Kerberosaurus manakini, Sabinas OTU, Salitral Moreno OTU (Willinakaqe), Shantungosaurus giganteus, and UTEP OTU.

Several character states in the published Prieto-Márquez [29] matrix were recoded, and after initial analysis, some characters were amended or excluded in a second analysis (see Phylogenetic Analyses section). No character states were recoded in the Gates et al. [3] matrix, and no characters were excluded. Thus, phylogenetic analyses were performed on a total of three matrices: 1) the matrix of Prieto-Márquez [29] with all characters included (19 taxa, 370 characters; S1 File); 2) the matrix of Prieto-Márquez [29] with some characters amended or excluded (19 taxa, 367 characters; S2 File); 3) the matrix of Gates et al. [3] with all characters included (13 taxa, 116 characters; S3 File).

The matrices were analyzed with parsimony in PAUP 4.0b10 [30] within a heuristic search of 5,000 replicates using ACCTRAN optimization and tree bisection-reconnection swapping to produce the most parsimonious trees, which were then combined into a strict consensus tree, and followed by a bootstrap analysis using a heuristic search of 5,000 replicates. The complete PAUP settings used are provided in the nexus files (S1S3 Files). For the Gates et al. [3] matrix, the bootstrap replicates were increased to 50,000 due to the support values for certain clades being extremely close to the cutoff value of 50%. Phylogeny figures were time-calibrated by drawing the cladograms using published age ranges (in Ma) for Cretaceous taxa; dates for members of Brachylophosaurini were recalibrated as in Table 1 and Fig 1, using the method of Renne et al. [10].

The left tibia of MOR 2919 was histologically sampled using the techniques of Lamm [31] for large specimens. The mid-diaphyseal segment with minimum circumference was removed, molded and cast, and embedded in resin for histological sectioning. Given the large dimensions of the tibia (anteroposterior mid-diaphysis cross-sectional diameter maximum 13.35 cm, mediolateral diameter minimum 10.60 cm), the transverse cross-section was cut into three parts (anterior, posteromedial, and posterolateral) that were mounted on separate slides and ground to a thickness of 100 μm. The finished slides were imaged at 10x and 40x total magnification on a Nikon Optiphot-Pol polarizing microscope with a Nikon DS-Fi1 digital sight camera utilizing an automated stage to move the slide incrementally. The resulting photomicrographs were compiled with NIS-Elements BR 3.0 software into high-resolution TIFF image files. Adobe Photoshop CS2 was used to combine the images of the three slides and trace the circumference of each line of arrested growth (LAG). These circumferences were then measured with ImageJ 1.46r [32].

Because the left tibia was slightly crushed, several cortical segments were displaced radially inward, resulting in the LAG tracings overestimating the true circumference due to the LAGs on either side of a displacement needing to be connected by a radially oriented line. This was corrected for each LAG individually by subtracting the length of these radial lines at the three areas of greatest displacement (anterolateral, posterolateral, posteromedial) from the total LAG circumference measured in ImageJ.

The left tibia of MOR 2919 was originally collected by UCMP in 1981 and curated as UCMP 137272. Limb bones prepared at UCMP at the time sometimes included a metal rebar rod and epoxy inserted into the medullary cavity for rigid support. After the tibia was transferred to MOR collections and sectioned for histology, the rebar was cut out of the tibia segments prior to mounting them on slides to avoid grinding metal on histological equipment. This created the open space seen in the center of the medullary cavity on the finished slides.

Nomenclatural Acts

The electronic edition of this article conforms to the requirements of the amended International Code of Zoological Nomenclature, and hence the new names contained herein are available under that Code from the electronic edition of this article. This published work and the nomenclatural acts it contains have been registered in ZooBank, the online registration system for the ICZN. The ZooBank LSIDs (Life Science Identifiers) can be resolved and the associated information viewed through any standard web browser by appending the LSID to the prefix "http://zoobank.org/". The LSID for this publication is: urn:lsid:zoobank.org:pub:657DD0A4-799D-443A-BE9F-A2987DFABADD. The electronic edition of this work was published in a journal with an ISSN, and has been archived and is available from the following digital repositories: PubMed Central, LOCKSS.

Results

Systematic Paleontology

Dinosauria Owen, 1842

Ornithischia Seeley, 1888

Ornithopoda Marsh, 1881

Hadrosauridae Cope, 1869

Hadrosaurinae Cope, 1869

Brachylophosaurini Gates et al., 2011

Definition.

Modified from Gates et al. [3]: Hadrosaurine ornithopods more closely related to Brachylophosaurus, Probrachylophosaurus, Maiasaura, or Acristavus than to Gryposaurus or Saurolophus.

Diagnosis.

As in Gates et al. [3].

Referred material.

UCMP 130139, a partial skull and skeleton originally described as the holotype of Brachylophosaurus goodwini [9], and later assigned to Brachylophosaurus canadensis [1, 23]. Due to the lack of a preserved nasal, and the presence of deep frontal depressions, the specimen cannot be confidently assigned to any current genus of Brachylophosaurini.

Horizon and locality.

UCMP 130139 was collected from the Judith River Formation of Kennedy Coulee, Hill County, northcentral Montana, in beds equivalent to the lower Oldman Formation, with a published height of approximately 15 m above the Marker A Coal of the Taber Coal Zone of the Foremost Formation [9]. However, a remeasured section shows that the site was actually only a few meters above the Marker A Coal, and lies within the Herronton Sandstone Zone (Mark Goodwin and David Evans personal communication, 2014).

Brachylophosaurus canadensis Sternberg, 1953

Holotype.

CMN 8893

Referred Material.

FMNH PR 862 (partial skull); MOR 720 (braincase); MOR 794 (nearly complete articulated skeleton); MOR 940 (braincase); MOR 1071 (monodominant bonebed); TMP 90.104.01 (complete skull and articulated partial skeleton).

Emended diagnosis (revised from Cuthbertson and Holmes [23]).

Nasal crest flat and paddle-shaped in adults, covering most or all of the supratemporal fenestrae; prefrontal as in Cuthbertson and Holmes [23]: “prefrontal projecting posteriorly over frontal, and more posteriorly, ventromedially directed to underlie nasal crest and contribute to anterior border of supratemporal fenestra”. These autapomorphies, together with the following traits, form a unique combination of characters: “only the anterior tip of the lacrimal contacting the maxilla; extremely elongated anterior maxillary process” [23].

Remarks.

In their rediagnosis of the holotype CMN 8893, Cuthbertson and Holmes [23] reduce the number of autapomorphies listed in Prieto-Márquez [1], and list an additional autapomorphy: “quadratojugal with ‘noncrescentic’ posterior margin variably forming paraquadratic foramen with quadrate” [23]. Because the posterior margin of the quadratojugal and the interpreted presence of a paraquadratic foramen are variable within Brachylophosaurus (see Quadrate and Quadratojugal descriptions and comparisons below), this character is not here considered an autapomorphy, and has been excluded from the emended diagnosis.

Horizons and localities.

CMN 8893, FMNH PR 862, and TMP 90.104.01 were collected from the Oldman Formation of southeastern Alberta. CMN 8893 and FMNH PR 862 were collected in Dinosaur Provincial Park; TMP 90.104.01 was collected near Onefour and the Milk River. Of these Albertan specimens, the exact stratigraphic position is known only for CMN 8893: the Comrey Sandstone Zone (Unit 2) of the Oldman Formation. MOR 720 was collected from the upper Judith River Formation in badlands surrounding the Missouri River north of Winifred, Fergus County, central Montana. MOR 794, MOR 940, and MOR 1071 were collected from the Judith River Formation of Malta, northern Montana, in beds equivalent to the Comrey Sandstone Zone of the Oldman Formation.

Probrachylophosaurus gen. nov.

urn:lsid:zoobank.org:act:7B7C87AC-2EFE-4587-9A24-A5D48C908941

Type species.

Probrachylophosaurus bergei sp. nov.

Etymology.

Pro- (Latin) before, -brachylophosaurus (Greek) short-crested lizard, in reference to the new taxon’s stratigraphic position below that of Brachylophosaurus canadensis.

Diagnosis.

As for type and only species.

Probrachylophosaurus bergei sp. nov.

urn:lsid:zoobank.org:act:49D503CB-7FA6-4D66-8FC0-0B4E2A3EE106

Holotype.

MOR 2919, majority of a skull and skeleton, disarticulated. Cranial material includes a right premaxilla (fragmentary), both maxillae, left jugal, partial right lacrimal, left posterior nasal, partial mid-region of right nasal, articulated braincase (with articulated frontals, parietal, postorbitals, and exoccipitals), both squamosals, both quadrates, predentary, both dentaries, and right surangular (Fig 3). Postcranial material includes atlas fragments and at least 10 other cervical vertebrae, 11 dorsal vertebrae, 29 caudal vertebrae, 19 chevrons, approximately 19 ribs, both ilia, both pubes, both ischia, both tibiae, both fibulae, both astragali, right metatarsal II, and right metatarsal IV. Forelimbs and sacral vertebrae are absent, although an isolated neural spine may belong to a sacral vertebra.

thumbnail
Fig 3. Probrachylophosaurus bergei gen. et sp. nov. skull reconstruction.

(A) Preserved skull elements of MOR 2919, left lateral view. Predentary not included due to its poor preservation and diagenetic compression. (B) Outline of skull reconstruction, left lateral view. The outline accounts for diagenetic distortion of the posterior braincase, but otherwise does not correct for distortion of skull elements. Outlined regions where left skull material was not preserved are based on right bones when available. Regions with neither left nor right material preserved are hypothesized reconstructions based on Brachylophosaurus canadensis skulls. (C) Braincase with left nasal crest, dorsal view. (D) Outline of braincase reconstruction with nasal crest, dorsal view. Reconstruction accounts for diagenetic lateral compression and distortion of posterior braincase. Abbreviations: d, dentary; ex, exoccipital; f, frontal; j, jugal; l, lacrimal; m, maxilla; n, nasal; p, parietal; pd, predentary; pf, prefrontal; pm, premaxilla; po, postorbital; q, quadrate; qj, quadratojugal; sa, surangular; sq, squamosal.

https://doi.org/10.1371/journal.pone.0141304.g003

Referred specimen.

MOR 1097, fragmentary subadult skull material including the right posterior nasal crest, right jugal, left coronoid process of dentary, dentary tooth rows, maxilla tooth rows, partial left prefrontal, and dorsal and ventral condyles of right quadrate.

Etymology.

Species name bergei in memory of Sam Berge, co-owner of the land where the specimen was discovered, and friend and relative of many members of the Rudyard, Montana community, who have supported paleontologic research for decades. Pronunciation: berg-ee-i

Horizon and locality.

MOR 2919 was collected from private land north of Rudyard, Montana, just east of the mouth of Kennedy Coulee along the Milk River near the USA-Canada border, in exposures of the Judith River Formation. The site, MOR locality JR-518 (“Superduck”), is within a grey mudstone stratigraphically equivalent to Unit 1 of the Oldman Formation of Alberta. The bone horizon is 17.5 m above the top of the Marker A Coal of the Taber Coal Zone of the Foremost Formation, and 7.0 m above the top of the Herronton Sandstone Zone of the Foremost Formation (Fig 4), with a recalibrated age between 79.5 +/- 0.2 Ma and 79.8 +/- 0.2 Ma [10, 11]. The skeleton was completely disarticulated and there was no preferred orientation of the long bones. Associated microsite material was rare, but dominated by tyrannosaur teeth. MOR 1097 was collected from state-owned land less than 1 km east of MOR 2919, and at a similar stratigraphic height.

thumbnail
Fig 4. Stratigraphic section at Probrachylophosaurus bergei gen. et sp. nov. MOR 2919 quarry, MOR locality JR-518.

Datum (0 m) is the top of the Marker A coal of the Taber Coal Zone of the Foremost Formation. Radiometric dates were recalibrated from Goodwin and Deino [11] samples collected southwest of MOR JR-518 in Kennedy Coulee; their stratigraphic heights are indicated on the section. This section is atypical for Kennedy Coulee sections in that it has a relatively thin Herronton Sandstone Zone (HSZ) low in section, and more sandstones in the upper part of the section, whereas most of the coulee has a thick sandstone zone above the Marker A coal, and is dominated by mudstone in the upper regions. The region indicated with “?” below the HSZ may or may not be classified as a continuation of the Taber Coal Zone.

https://doi.org/10.1371/journal.pone.0141304.g004

The site was discovered by Kyoko Kishi and partially excavated by a UCMP crew led by Mark Goodwin in 1981 and 1994, which collected some postcranial material (UCMP locality V81232). Additional material became exposed in 2007, so a MOR crew continued excavation in 2007 and 2008, collecting the skull and extensive postcrania. Because all skeletal material at the site belongs to a single individual, UCMP graciously transferred its postcranial material to MOR. Consequently, the specimen numbers have been altered; all bones are now MOR 2919, and the old UCMP numbers are now treated as “field numbers” for purposes of identifying individual bones within MOR 2919. Original UCMP collections numbers were: left tibia UCMP 137272, right fibula UCMP 156955, right metatarsal IV UCMP 399999, right ilium UCMP 172484, left astragalus UCMP 172484, and caudal vertebra UCMP 400000. A jacket containing an unprepared and thus previously uncataloged right tibia was also transferred to MOR.

Diagnosis.

Probrachylophosaurus bergei is a hadrosaurine hadrosaurid diagnosed by the following features: solid crest consisting entirely of the nasals that overhangs the supratemporal fenestrae by less than 2 cm in adults; nasal crest being extremely dorsoventrally thickened medially, resulting in a strongly triangular frontal plane cross section, with the dorsal angle formed by the paired nasals in posterior view being less than 130 degrees. These autapomorphies, together with the following traits, form a unique combination of characters: posterior lacrimal mediolaterally wide as in Acristavus but not Brachylophosaurus, caudoventral apex of the rostral process of the jugal is posterior to the caudodorsal apex as in Acristavus but not Brachylophosaurus, squamosals contact each other medially as in Acristavus but not Brachylophosaurus, posteriorly-oriented solid nasal crest as in Brachylophosaurus but not Acristavus.

Osteological Description

The focus of this description is to highlight features of MOR 2919 that differ from other specimens of Brachylophosaurini, are phylogenetically significant, or that may be ontogenetically variable in hadrosaurids. Characters not mentioned are either unobservable in the preserved elements of MOR 2919, or are consistent with Brachylophosaurus canadensis and related hadrosaurs [1, 23, 33], such that descriptions need not be duplicated here. The comparative specimens of B. canadensis used herein are identified by specimen number rather than simply genus and species name due to slight morphologic differences among specimens (Table 2). Generally, morphologic descriptions of B. canadensis are based on the holotype, CMN 8893, for characters observable on an articulated skull, and MOR 1071 for characters only observable on disarticulated specimens. Unless otherwise indicated, all morphologic descriptions of Acristavus are based on MOR 1155 (holotype; [3]), Maiasaura on YPM-PU 22405 (holotype; [5]), Gryposaurus on CMN 2278 (holotype of Gryposaurus notabilis; [34]), and Prosaurolophus on MOR 454 (holotype of Prosaurolophus blackfeetensis; [35]). For features not preserved on the Maiasaura holotype, a referred specimen (OTM F138) of uncertain stratigraphic position is used for comparison [36].

MOR 2919 (Fig 3) represents one of the largest brachylophosaurin specimens. Exact comparisons of cranial dimensions among specimens are difficult due to diagenetic compression affecting each specimen to a different degree and direction. However, for specimens with associated postcrania, comparisons are more straightforward (Table 3). Although the relative size of individuals does not necessarily indicate the same degree of relative maturity, the larger size of MOR 2919 suggests that it is an adult, not merely an immature specimen of B. canadensis; this conclusion is supported by its axial fusion and osteohistology (see Discussion).

thumbnail
Table 3. Size comparisons of MOR 2919 and other selected Brachylophosaurini specimens.

https://doi.org/10.1371/journal.pone.0141304.t003

Skull—Maxillary/facial complex

Premaxilla.

The premaxilla is severely crushed and fragmented, and so is of limited morphological use. The anterior portion is best preserved; the posterodorsal and posteroventral processes are absent. The oral margin is anteroposteriorly wide and ventrally deflected as in Brachylophosaurus (CMN 8893, MOR 1071) rather than dorsally reflected as in other hadrosaurines (e.g. Gryposaurus, Prosaurolophus MOR 447). The ventral margin is eroded; no denticles are preserved. Premaxillary foramina are unobservable, either due to crushing or true absence.

Maxilla.

The maxillae of MOR 2919 are consistent in most respects with the morphology of Brachylophosaurus (Fig 5). The relative size and placement of the large maxillary foramen in MOR 2919 is consistent with all members of Brachylophosaurini (Brachylophosaurus MOR 1071, Maiasaura OTM F138, Acristavus), although the number and pattern of additional smaller maxillary foramina on the lateral surface can be variable between individuals of the same species. Maxillae from the MOR 1071 Brachylophosaurus bonebed have four to five smaller foramina in differing patterns of arrangement. MOR 2919 has three of these smaller foramina on each maxilla. As in Acristavus, the posterior maxillary process is broken at its base on both maxillae, but if complete would likely have been similar to that of Brachylophosaurus. The anterodorsal maxillary process is also partially broken on both maxillae (anteriorly on the right and anterodorsally on the left), but if complete would resemble that of Brachylophosaurus. The ventral margin of the maxilla is nearly straight, with the anterior one-third only slightly ventrally deflected, similar to the condition seen in Acristavus and Brachylophosaurus.

thumbnail
Fig 5. Brachylophosaurin maxillae.

(A-D, F) Probrachylophosaurus bergei gen. et sp. nov., MOR 2919. Estimated reconstruction of anterodorsal process indicated with dashed line. (A) left maxilla, lateral view; (B) left maxilla, medial view; (C) right maxilla, lateral view; (D) right maxilla, medial view; (E) Brachylophosaurus canadensis right maxilla, lateral view MOR 1071-8-13-98-559; (F) teeth of MOR 2919 left maxilla demonstrating slight sinuosity of median carinae. Abbreviations: adp, anterodorsal process; mf, maxillary foramen.

https://doi.org/10.1371/journal.pone.0141304.g005

The left maxilla possesses 52 tooth rows; the right maxilla tooth rows are obscured anteriorly. The occlusal plane of the left maxilla (30.5 cm) of MOR 2919 is slightly longer than that of Brachylophosaurus holotype CMN 8893 (right 29 cm, left 28.5 cm), which has 46 tooth rows [23]. In both specimens, tooth sizes are largest in the center of the maxilla, and decrease in size anteriorly and posteriorly [23]. MOR 2919 is able to accommodate its increased density of tooth rows by decreasing its anterior and posterior tooth sizes relatively more than in CMN 8893. Because the number of tooth rows in hadrosaurines increases ontogenetically, the high tooth count in MOR 2919 is likely due to its size and maturity rather than being taxonomically informative. Less than one-third of the teeth that had begun to wear on the occlusal plane remain, so the number of teeth per family exposed on the occlusal plane cannot be determined; most teeth preserved in the maxillae are unworn. Each tooth possesses a single median carina, many of which are subtly sinusoidal (Fig 5F), as in Brachylophosaurus (FMNH PR 862). The edges of the crowns have papillae that are slightly smaller but more prominent than those of Brachylophosaurus (MOR 1071).

Jugal.

On the medial surface of the rostral (maxillary) process of subadult and adult Probrachylophosaurus (Fig 6), the palatine joint is obliquely oriented, raised medially, and extends anteriorly to form a lip as in Brachylophosaurus and Acristavus. The adult MOR 2919 palatine process extends the farthest anteriorly, forming a narrow slot below its 10 mm overhang (Fig 6B), and most closely matches that of adult Brachylophosaurus MOR 1071-7-16-98-248-Q (Fig 6F, lip 5 mm). The anterior curvature that forms the lip in the subadult MOR 1097 is gentle and forms a small overhanging lip (Fig 6C, 3 mm) identical in size and morphology to Acristavus. The lip in Maiasaura is variably developed, overhanging 4 mm in the holotype YPM-PU 22405 but only 1 mm in OTM F138. The palatine joint does not form an overhanging lip in Prosaurolophus or Gryposaurus (MOR 478, G. latidens).

thumbnail
Fig 6. Brachylophosaurin jugals.

(A, B), Probrachylophosaurus bergei gen. et sp. nov. adult, MOR 2919, left jugal; (A) lateral view; (B) medial view. (C, D) P. bergei subadult, MOR 1097, right jugal reconstructed with dashed line; (C) medial view; (D) lateral view. (E, F) Brachylophosaurus canadensis adult, MOR 1071-7-16-98-248-Q, right jugal reversed. Note that the postorbital process was broken at its base and should be inclined more posteriorly; (E) lateral view; (F) medial view. Abbreviations: cvf, caudoventral flange; lp, lacrimal process; pop, postorbital process; pp, palatine process; qjp, quadratojugal process; rp, rostral process.

https://doi.org/10.1371/journal.pone.0141304.g006

In Brachylophosaurus (CMN 8893, FMNH PR 862, MOR 794, MOR 1071), the caudodorsal and caudoventral apices of the rostral process are in line vertically when the rostral process is oriented horizontally. In MOR 1097, MOR 2919, and Acristavus (contra [29]), the caudoventral apex is posterior to the caudodorsal apex when the rostral process is oriented horizontally (character 106/J4 in [29]). In Maiasaura (YPM-PU 22405, OTM F138), the caudoventral apex is only slightly posterior to the caudodorsal apex. The lacrimal process on the dorsal rostral process is broken in MOR 2919, but intact in MOR 1097, where it resembles that of Brachylophosaurus, although it is relatively slightly larger in MOR 1097. The ventral margin of the rostral process is straight in MOR 1097 and MOR 2919, as in Acristavus. The ventral margin is sigmoidal in lateral view in Brachylophosaurus (CMN 8893, MOR 1071) and somewhat sigmoidal in one Maiasaura specimen (OTM F138), although it is straight in the Maiasaura holotype (YPM-PU 22405).

The ascending postorbital process is broken at its base, but bone texture at the base indicates that the postorbital process would have been angled to the same degree as in Brachylophosaurus. The ventral margin of the orbit is wider than the ventral margin of the lateral temporal fenestra, as in Brachylophosaurus, Acristavus, and Maiasaura.

MOR 2919 has a relatively wider (dorsoventrally) caudal constriction of the jugal than do Brachylophosaurus (CMN 8893, MOR 1071-7-16-98-248-Q), Acristavus, and Maiasaura, although MOR 1097’s caudal constriction is narrower than in these other taxa. The ratio of the depth of the caudal constriction to the anterior constriction in MOR 2919 is 1.42 (character 113/J11 in [29]). The ratio of dorsoventral depth of the caudoventral flange to the caudal constriction is 1.45 (character 110/J8 in [29]). These ratios are 1.40 and 1.61, respectively, in the Brachylophosaurus holotype (CMN 8893). The caudoventral flange of MOR 2919 is dorsoventrally deep, as in other brachylophosaurins, but relatively wider anteroposteriorly than in Brachylophosaurus.

The concavity of the posterior jugal margin between the quadratojugal process and caudoventral flange is weakly developed in MOR 2919, as in Acristavus and Maiasaura. The concavity is deeper in Brachylophosaurus. The medial side of the quadratojugal process is more gently excavated in MOR 2919 than in Brachylophosaurus or Maiasaura. The excavation in Acristavus is slightly more pronounced than in MOR 2919, but less than in Brachylophosaurus.

Lacrimal.

The posterior right lacrimal preserves part of the anterior orbital margin and anteroventrally oriented lacrimal duct (Fig 7). The medial portion of the lacrimal is not preserved, so only the lateral side of the lacrimal foramen is present; the foramen’s original size and shape cannot be determined. However, the bone lateral to the foramen is robust (Fig 7E), over twice as mediolaterally thick as the corresponding region in Brachylophosaurus MOR 1071-7-10-98-171 (Fig 7F), consistent with the robusticity described for Acristavus [3]. The posterior jugal contact is robust and ventrally convex, whereas it is strongly ventrally concave in Brachylophosaurus.

thumbnail
Fig 7. Brachylophosaurin lacrimals.

(A, B, E) Probrachylophosaurus bergei gen. et sp. nov., MOR 2919, posterior right lacrimal; (A) lateral view; (B) medial view; (C, D, F) Brachylophosaurus canadensis, MOR 1071-7-10-98-171, left lacrimal reversed; (C) lateral view; (D) medial view; (E) posterior view MOR 2919, medial portion reconstructed with dashed line; (F) posterior view MOR 1071-7-10-98-171. Abbreviations: ld, lacrimal duct; lf, lacrimal foramen.

https://doi.org/10.1371/journal.pone.0141304.g007

Nasal.

The size and shape of the nasal crest is the main distinguishing character between Probrachylophosaurus and Brachylophosaurus. The nasal crest of Probrachylophosaurus (MOR 1097, MOR 2919; Figs 8 and 9) is shorter, and more triangular in cross-section, than equivalently aged Brachylophosaurus specimens. The crest consists entirely of the nasals, and overhangs the supratemporal fenestrae by less than 1 cm in the adult (Fig 3). The length of the nasal crest that extends posterodorsally, overhanging the posterior frontals, is 8.0 cm in the adult (MOR 2919) and 3.2 cm in the subadult (MOR 1097). The nasal crest is extremely dorsoventrally thickened medially, and rapidly thins laterally. The dorsal angle formed by the paired nasals, in posterior view, is 112° in the adult (MOR 2919; Fig 9B) and 126° in the subadult (MOR 1097; Fig 9A). The crest tapers posteriorly in a “V” shape. The posteriormost dorsal surface of the nasal crest is rugose in MOR 2919 but smooth in MOR 1097 (Fig 8).

thumbnail
Fig 8. Probrachylophosaurus bergei gen. et sp. nov. nasals.

(A-D) Adult, MOR 2919, posterior left nasal, crest pointing right except for (D); (A) dorsal view; (B) ventral view showing rugose nasofrontal suture; (C) lateral view; (D) medial view. (E, F) Subadult, MOR 1097, posterior right nasal; (E) dorsal view; (F) ventral view showing linearly striated nasofrontal suture.

https://doi.org/10.1371/journal.pone.0141304.g008

thumbnail
Fig 9. Brachylophosaurin nasals, posterior view.

In Probrachylophosaurus bergei gen. et sp. nov. and slender Brachylophosaurus canadensis morphotypes, the nasal crest is narrow and triangular in cross section. In B. canadensis, the nasal crest flattens as it grows wider. (A) Probrachylophosaurus bergei subadult, MOR 1097; (B) P. bergei adult, MOR 2919; (C) Brachylophosaurus canadensis slender morphotype, MOR 1071-7-7-98-86; (D) B. canadensis intermediate morphotype, FMNH PR 862; (E) B. canadensis robust morphotype, MOR 794.

https://doi.org/10.1371/journal.pone.0141304.g009

In adult Brachylophosaurus, the exposed nasal crest is composed entirely of the nasals, but the frontal and/or prefrontal platform does extend posteriorly over the supratemporal fenestrae to support the base of the nasal crest (see frontal description below). The flat, paddle-like nasal crest of Brachylophosaurus varies in size amongst individuals. Prieto-Márquez (2005) categorized specimens as “slender” or “robust”. The nasal crest of slender specimens (MOR 1071-7-7-98-86, MOR 1071-7-16-98-248) covers most of the length of the supratemporal fenestrae, but does not reach their posterior or lateral margins. The crest tapers posteriorly in a “U” shape, resulting in the crest overhanging approximately 50% of the area of the supratemporal fenestrae. The crest is thickened medially; the dorsal angle of the paired nasals is 140° in MOR 1071-7-7-98-86 (Fig 9C). The nasal crest of the robust MOR 794 is much longer and wider, overhanging the entire supratemporal fenestrae and extending posteriorly past the supraoccipital; the dorsal angle of the paired nasals is 165° (Fig 9E). These slender and robust categories are not discrete; some Brachylophosaurus specimens (CMN 8893, FMNH PR 862, TMP 1990.104.001) possess intermediate morphologies, completely overhanging the supratemporal fenestrae posteriorly but not laterally. The crests of FMNH PR 862 and TMP 1990.104.001 are nearly robust, while CMN 8893 more closely resembles an enlarged slender morphology. These intermediate crest morphologies also have intermediate dorsal angles of the paired nasals: 151° in FMNH PR 862 (Fig 9D) and 157° in CMN 8893. The nasals of subadult Brachylophosaurus canadensis (MOR 940) appear to remain flat against the frontal and do not form a crest (Fig 10).

thumbnail
Fig 10. Subadult Brachylophosaurus canadensis braincase MOR 940 in dorsal view.

Anterior is to the left. Specimen is from the Judith River Formation near Malta, Montana, in a horizon equivalent to the Comrey Sandstone Zone of the middle Oldman Formation. Borders of the nasals are indicated by white arrows. The specimen is heavily fractured, and the nasals are slightly elevated above the frontals, but this is due to fracturing; when undeformed, the nasals would have lain flush over the frontals, with no open space in between. There is no projection forming an overhanging, posteriorly oriented nasal crest as would be seen in larger Brachylophosaurus canadensis specimens.

https://doi.org/10.1371/journal.pone.0141304.g010

The nasofrontal articulation surface of MOR 2919 is rugose, and the posterior articulation is composed of deep pits (up to 12 mm) and projections to interlock with those of the frontal (Fig 8B). The nasofrontal articulation surface of MOR 1097 consists of anteroposterior striations and a single pit on the posterolateral margin (Fig 8F). The striations on the subadult MOR 1097 nasofrontal articulation surface correlate well to the striations on the frontals of subadult Brachylophosaurus (see frontal discussion below). No disarticulated nasals of Brachylophosaurus were available for comparison.

The anterior nasals are not preserved, and no part of the nasals or premaxilla preserves more than a few centimeters of possible narial margin, if any. However, the lateral middle region of the left nasal is preserved, with articulation surfaces for the prefrontal, lacrimal, and posteroventral process of the premaxilla. On the lateral nasal surface, dorsal to the lacrimal articulation, is a subcircular depression 2 cm in diameter that includes a small fenestra. On the medial side in the same location is an anteroventrally-posterodorsally oriented excavation 4 cm long, 1 cm wide, and 1 cm deep; the small fenestra opens halfway along the length of the excavation. This excavation may correspond to the “anteroposteriorly oriented groove terminating in elongated foramen” described for Brachylophosaurus [1]. However, the excavation in MOR 2919 is located on the medial side of the lateral nasal anterior to the prefrontal, whereas in MOR 1071-7-7-98-86 it is on the ventral side of the dorsal nasal medial to the prefrontal. Alternatively, the excavation in MOR 2919 may be pathologic, and possibly associated with the pathologies on both dentaries.

Prefrontal.

No prefrontals are preserved in MOR 2919. MOR 1097 includes a partial left prefrontal, missing the posterior orbital region. Its morphology is generally similar to that of Brachylophosaurus.

Frontal.

The anterior margin of the frontals in MOR 2919 forms a posteriorly directed “V” (Fig 11), similar to that seen in the “slender” adult Brachylophosaurus MOR 1071-7-7-98-86. The anterior frontals in subadult Brachylophosaurus MOR 1071 braincases form posteriorly directed “U” shapes. Both are distinct from the rectangular anterior frontal margin of Acristavus, with its midline slight anterior projection. The adult Brachylophosaurus skull GPDM JRF.65 has the rectangular margin of Acristavus but without the midline anterior projection.

thumbnail
Fig 11. Posterior migration of brachylophosaurin nasofrontal suture with ontogeny and stratigraphic age.

In the stratigraphically oldest specimen, the adult Probrachylophosaurus bergei gen. et sp. nov., (A) MOR 2919, from the Judith River Formation equivalent of Unit 1 of the lower Oldman Fm, the nasofrontal suture extends over less than half of the frontals. This suture extends over approximately half of the frontals in subadult Brachylophosaurus canadensis specimens (B) MOR 1071-7-13-99-87-I and (C) MOR 1071-C-3-3, from the Judith River Formation equivalent of the Comrey Sandstone of the middle Oldman Fm, and migrates posteriorly to completely cover the frontals in the adult (D) GPDM JRF.65, a condition also seen in adult B. canadensis from the upper Judith River Formation, (E) MOR 720. Border of nasofrontal suture in (A-C) indicated with arrows.

https://doi.org/10.1371/journal.pone.0141304.g011

The frontals of MOR 2919 at the orbital margin are 2.2 cm thick, rugose, and contribute a length of 2.3 cm to the orbital margin with no indentation between the prefrontal and postorbital, similar to that of Acristavus (MOR 1155). The area near the orbital margin of UCMP 130139 is too poorly preserved to observe the locations of sutures, and so the presence, absence, or extent of frontal contribution to the orbital margin cannot be determined; as in MOR 2919, there is no indentation between the prefrontal and postorbital regions. In Brachylophosaurus, the frontal margin may be partially or entirely recessed in a medial indentation (0 to 1 cm deep) in the dorsal orbital margin between the prefrontal and postorbital. The base of this indentation exposes a length of 0 to 3 cm of the frontal to the orbital margin (CMN 8893, FMNH PR 862, MOR 794, all MOR 1071 braincases).

Nasofrontal suture.

In MOR 2919, the nasofrontal suture is rugose, composed of anteroposterior linear striations, with pits at its posterior margin. The suture covers approximately half (59%) of the dorsal frontal surface, resembling the subadult condition of Brachylophosaurus (Figs 11A and 12). Two small subadult specimens of Brachylophosaurus, MOR 1071-7-13-99-87-I (Fig 11B) and MOR 1071-C-3-3 (Fig 11C), allot 69% and 60%, respectively, of their frontal surfaces to the nasofrontal suture; the suture surfaces are covered with anteroposterior linear striations but are not pitted posteriorly. A slightly larger subadult, MOR 1071-6-30-98-4, has a suture at least 64% the length of the frontals (frontals are slightly broken anteriorly), and the surface includes both anteroposterior linear striations and minor posterior pitting. Another subadult specimen, MOR 940, still has the nasals articulated onto the frontals; the nasals cover 54% of the dorsal frontal surface, and do not rise above the frontals in a crest (Fig 10). All currently known Brachylophosaurus specimens with an overhanging nasal crest have a nasofrontal suture that covers 100% of the frontals (CMN 8893, FMNH PR 862, MOR 794, MOR 1071-8-98-86, MOR 1071-7-16-98-248). A growth stage of Brachylophosaurus with an incipient crest between the stages of the non-crested subadult MOR 940 and the large-crested specimens is hypothesized but currently unknown.

thumbnail
Fig 12. Posterior migration and enlargement of nasofrontal suture with growth in brachylophosaurins.

In subadult Brachylophosaurus, the nasofrontal suture covers 50–75% of the dorsal frontal surface; in adults, the nasofrontal suture covers the entire dorsal surface. In Brachylophosaurus specimens from the Comrey Sandstone Zone of the middle Oldman Formation and its Judith River Formation equivalent in Malta, Montana (solid black circles; CMN 8893, JRF.65, MOR 940, and MOR 1071 specimens C-3-3, 6-30-98-4, 7-13-99-87-I, and 7-7-98-86), the relative coverage of the nasofrontal suture increases with frontal length until the frontal is entirely covered by the nasofrontal suture. Larger adult Brachylophosaurus braincases from an unknown stratigraphic height in the Oldman Formation of Alberta (open squares; FMNH PR PR 862, TMP 1990.104.001) and the Upper Judith River Formation of central Montana (open triangle; MOR 720; stratigraphic height relative to Oldman Formation of Alberta unknown) also have the frontals entirely covered by the nasofrontal suture. Probrachylophosaurus gen. nov. from the Montana Judith River Formation equivalent of the lower Oldman Formation (black x; MOR 2919) differs from the Brachylophosaurus growth trajectory in having a subadult Brachylophosaurus degree of coverage in an adult sized skull.

https://doi.org/10.1371/journal.pone.0141304.g012

The posteriormost margin of the nasofrontal articulation is mediolaterally straight in MOR 1071-C-3-3 and MOR 1071-6-30-98-4, but in MOR 1071-7-13-99-87-I and MOR 940 the medial portion is indented anteriorly (the “M-shape” of Prieto-Márquez, 2005). The margin is gently convex posteriorly in MOR 2919 with no medial indentation. The interfrontal-parietal articulation is posterodorsally elevated in MOR 2919, as noted for Brachylophosaurus [1]. In the MOR 1071 subadult braincases, a raised lip defines the posterior margin of the nasofrontal articulation. The posterior margin in MOR 2919 lacks any line or lip, and instead undulates with the rugosities and posterior pits.

In adult Brachylophosaurus, the nasofrontal suture covers the entire anteroposterior length of the frontals (Figs 11D–11E and 12). The platform supporting the nasals is posteriorly elongated to overhang the supratemporal fenestrae by a short distance. In CMN 8893, FMNH PR 862, and MOR 1071-7-7-98-86, this projection appears to be composed entirely of the prefrontals, but in MOR 720, it is composed of the frontals. The longer the nasal crest, the more the prefrontals and/or frontals are elongated posteriorly. The gracile-crested MOR 1071-7-7-98-86 possesses prefrontals that overhang the supratemporal fenestra by 2 cm, whereas the more robust FMNH PR 862 possesses prefrontals that overhang by 4 cm. The posteriorly incomplete frontals of MOR 720, a larger individual than FMNH PR 862, would have overhung the fenestrae by at least 5 cm. In subadult specimens where the nasofrontal suture does not cover the entire frontals, the prefrontals and frontals do not protrude over the supratemporal fenestrae at all (MOR 1071-7-13-99-87-I, MOR 1071-C-3-3, MOR 1071-6-30-98-4).

Posterior to the nasofrontal articulation, the frontals of MOR 2919 are shallowly depressed by 5 to 7 mm. Acristavus (MOR 1155) also possesses shallow frontal depressions. Frontal depressions are not observed in adult Brachylophosaurus due to complete coverage by the nasofrontal articulation. The MOR 1071 subadult Brachylophosaurus specimens have small anteroposteriorly elongated frontal depressions 3 to 4 mm deep near the frontal-postorbital sutures, more laterally than those of MOR 2919. The dorsal sutures between the frontals and postorbitals of MOR 2919 are faintly visible, but are fused and nearly completely remodeled.

The frontals of the holotype of Brachylophosaurus goodwini, UCMP 130139, are fragmented and poorly preserved, but UCMP 130139 remains unique among Brachylophosaurini specimens in possessing deep frontal depressions (at least 2 cm deep). Horner [9] measured the frontal thickness at the deepest point of the depression in UCMP 130139 as 5 mm thick. The corresponding region in MOR 2919 is 26 mm thick on the right side and 22 mm thick on the left side (slightly crushed).

Parietal.

The lateral suture between the parietal and laterosphenoid is fused but still faintly visible. The overall morphology of the parietal is consistent with that of Brachylophosaurus and Acristavus [1, 3, 23].

Postorbital.

The orbital margin of the postorbital in MOR 2919 is similarly rugose to that of the frontal (Fig 13A). The lateral surface of the jugal process varies amongst specimens of Brachylophosaurini, and is highly intraspecifically variable within Brachylophosaurus canadensis. Thus it may not be a character of taxonomic value. The lateral surface is rough and straight in MOR 2919. This surface is smooth and concave in some Brachylophosaurus (MOR 794, MOR 1071-7-7-98-86). In other Brachylophosaurus (FMNH PR 862), the superior portion of the jugal process is smooth and gently concave, but inferiorly becomes rough and straight, identical to the condition in Maiasaura and Brachylophosaurini indet. (UCMP 130139). Cuthbertson and Holmes [23] describe the lateral surface of the Brachylophosaurus holotype (CMN 8893) as “deeply pitted”, which is more similar to FMNH PR 862 and MOR 2919 than to the specimens from Malta, Montana (MOR 794, MOR 1071-7-7-98-86). The right postorbital of Brachylophosaurus TMP 1990.104.001 has a circular pathologic depression, and should not be used for textural comparison. The lateral surface of the jugal process in Acristavus gagslarsoni (MOR 1155) is smooth and concave, matching the Malta specimens. MOR 2919 lacks the anteriorly directed sheet of bone in the posterodorsal corner of the orbit and jugal process depression present in Acristavus sp. (UMNHVP 16607).

thumbnail
Fig 13. Probrachylophosaurus bergei gen. et sp. nov. postorbital and squamosal.

MOR 2919 (A) right postorbital and orbital margin of frontal, lateral view; (B) left squamosal, lateral view. Abbreviations: asppo, articulation for the squamosal process of the postorbital; f, frontal; jp, jugal process; om, orbital margin; poqp, postquadratic process; prqp, prequadratic process; qc, quadrate cotylus; sp, squamosal process.

https://doi.org/10.1371/journal.pone.0141304.g013

The squamosal processes of the MOR 2919 postorbitals were fractured at their bases and reattached; these breaks combined with diagenetic deformation make it difficult to determine whether the squamosal processes projected somewhat dorsally as in most hadrosaurines, or remained in line with the anterior postorbitals as in Brachylophosaurus (CMN 8893, MOR 794, TMP 1990.104.001) and Acristavus (MOR 1155) [3]. The squamosal processes of MOR 2919 are broken posteriorly before the contact with the squamosal. The sutures between the postorbitals and parietal are completely fused and obscured.

Squamosal.

The prequadratic process is stout and as mediolaterally wide as it is dorsoventrally high (Fig 13B), similar to that of subadult Brachylophosaurus (MOR 1071-7-13-99-87-H), but it is shorter and wider than that of adult Brachylophosaurus (CMN 8893, MOR 794, MOR 1071-7-7-98-86) and Acristavus (MOR 1155). The prequadratic processes of MOR 2919, Acristavus (MOR 1155), and Brachylophosaurus (MOR 1071-7-7-98-86, MOR 1071-7-13-99-87-H) are strongly anteroposteriorly compressed. Outside of Brachylophosaurini, the prequadratic process is nearly twice as dorsoventrally high as it is mediolaterally wide, and is subcircular in cross section rather than compressed (e.g. Prosaurolophus MOR 447-7-27-7-6). The prequadratic processes in Maiasaura specimens YPM-PU 22405 and OTM F138 are not preserved well enough for comparison. The postquadratic process in MOR 2919, Acristavus (MOR 1155), and Brachylophosaurus (MOR 1071-7-7-98-86) is more mediolaterally compressed than in Maiasaura or Prosaurolophus.

The articulation for the squamosal process of the postorbital extends to a point on the squamosal above the middle of the quadrate cotylus in MOR 2919, some Brachylophosaurus (FMNH PR 862), and Brachylophosaurini indet. (UCMP 130139), and extends just posterior to the middle in other Brachylophosaurus (MOR 794, MOR 1071-7-7-98-86). The squamosal process of the postorbital extends just anterior to the middle of the quadrate cotylus in Acristavus.

Posteriorly, the parasagittal crest of the parietal appears to bifurcate, similar to the condition in Acristavus. In MOR 2919 and Acristavus, this apparent bifurcation is actually composed of the posteromedial processes of the squamosals, which contact each other directly (Fig 3C and 3D). The posteromedial processes are broken off of the main bodies of both squamosals of MOR 2919, but a fragment of the left process remains attached to the parietal, with the suture to the parietal fused and nearly obliterated. On the right side, the squamosal was broken roughly at the fused suture. In Brachylophosaurus, the squamosals are separated by a narrow (MOR 1071-7-7-98-86) or thickened (CMN 8893; [23]) extension of the parasagittal crest. In Maiasaura OTM F138, the parasagittal crest inserts partially between the posteromedial processes of the squamosals so they are separated anteriorly but not posteriorly; this area is broken in the Maiasaura holotype YPM-PU 22405.

Quadrate.

The posterodorsal process (also termed the quadrate buttress [3] or squamosal buttress [29]) below the squamosal condyle is slightly more enlarged than in Brachylophosaurus. In MOR 2919 the process is 4 cm high and extends 1 cm posteriorly (Fig 14). In Brachylophosaurus (CMN 8893, FMNH PR 862, MOR 794, MOR 1071-8-13-98-559-D) the posterodorsal process is more pointed, with its base a maximum of 3 cm high and extending a maximum of 1 cm posteriorly. The posterodorsal process in Brachylophosaurini indet. (UCMP 130139) is more similar to that of Brachylophosaurus than to MOR 2919. The posterodorsal process in Acristavus (MOR 1155) is low and gently convex, with its base 2 cm high and extending 3 mm posteriorly. In Maiasaura (YPM-PU 22405 and OTM F138) the posterodorsal process is elongated (3–3.5 cm high) as in MOR 2919, but low, extending only 3–5 mm posteriorly, as in Acristavus. The posterodorsal process in Prosaurolophus has an elongate base 2.5 cm high and extends 3 mm posteriorly, resembling that of Maiasaura and Acristavus. In Gryposaurus notabilis ROM 873 the posterodorsal process is large, convex, and continuous with the posterior margin of the squamosal condyle; in the G. notabilis holotype CMN 2278 the posterodorsal process is less pronounced posteriorly, but is vertically straight and continuous with the posterior margin of the condyle. The presence or absence of the posterodorsal process (squamosal buttress) is a character (Q5, character 120) in the matrix of Prieto-Márquez [29]; the similarities in size and shape of the posterodorsal process between Probrachylophosaurus and Brachylophosaurus, and their differences compared to other taxa such as Gryposaurus, suggest that the “presence” character state could be split into additional character states for greater phylogenetic resolution.

thumbnail
Fig 14. Probrachylophosaurus bergei gen. et sp. nov. quadrates.

(A-D) Adult, MOR 2919, left quadrate; (A) lateral view; (B) medial view; (C) dorsal view of squamosal condyle; (D) ventral view of surangular condyle. (E-G) Adult, MOR 2919, right quadrate with broken pterygoid flange; (E) lateral view; (F) dorsal view of squamosal condyle; (G) medial view. (H-J) Subadult, MOR 1097, right quadrate; (H) dorsal view of squamosal condyle; (I) lateral view with missing portion reconstructed with dashed line; (J) ventral view of surangular condyle. Condyles are all oriented with the lateral side down. Abbreviations: dqf, dorsal quadratojugal flange; pdp, posterodorsal process; pf, pterygoid flange; vqf, ventral quadratojugal flange.

https://doi.org/10.1371/journal.pone.0141304.g014

The dorsal half of the quadrate curves slightly posteriorly in Brachylophosaurus (CMN 8893, FMNH PR 862, MOR 794, MOR 1071-8-13-98-559-D) [33], Brachylophosaurini indet. (UCMP 130139), and Maiasaura, but is straight in MOR 2919 and Acristavus. In Brachylophosaurus (MOR 1071-8-13-98-559-D) the flange above the dorsal quadratojugal articulation is much larger anteriorly than the ventral flange to accommodate the posterior deflection of the dorsal quadrate, so that the dorsal quadratojugal articulation is directly above the ventral in life position. Specimens with straight quadrates (MOR 2919 and Acristavus) have shallow quadratojugal embayments, with the dorsal flange only slightly larger than the ventral flange. Although Maiasaura possesses the posterior deflection of the dorsal quadrate, its quadratojugal flanges are nearly equal in size.

There may have been a paraquadratic foramen present in MOR 2919. Cuthbertson and Holmes [23] noted that the quadratojugal embayment of the quadrate of the Brachylophosaurus holotype CMN 8893 possesses roughened dorsal and ventral articular facets for the quadratojugal, and interpreted the smooth surface between the dorsal and ventral facets as evidence supporting a paraquadratic foramen. Cuthbertson and Holmes [23] also noted that a paraquadratic foramen is not visible in other specimens of Brachylophosaurus (MOR 794 and TMP 1990.104.001), although the separated dorsal and ventral articular facets are present on the quadrate of TMP 1990.104.001 (and the disarticulated quadrate MOR 1071-8-13-98-559-D). The authors hypothesized that a paraquadratic foramen may have been variably present or absent in different individuals of Brachylophosaurus. The embayment for the quadratojugal in MOR 2919 has roughened articular surfaces for the dorsal and ventral quadratojugal contacts, and is smooth in between them, similar to the state in Brachylophosaurus that was interpreted by Cuthbertson and Holmes [23] as a small paraquadratic foramen. The quadrates of the Acristavus holotype MOR 1155, Prosaurolophus MOR 447-8-4-7-2, and Gryposaurus MOR 2573 also have a small smooth area separating the dorsal and ventral articular facets. Thus, if this smooth area is evidence of a paraquadratic foramen, then this foramen is widespread among hadrosaurines. Because a paraquadratic foramen is coded as absent for all hadrosaurines and lambeosaurines in the analysis of Prieto-Márquez [29] (character 189), the presence of a smooth area between the dorsal and ventral articular facets may not be indicative of a paraquadratic foramen.

The pterygoid flange has a slightly roughened surface where it articulates with the pterygoid; its extent is similar to that in Brachylophosaurus (FMNH PR 862, MOR 1071-8-13-98-559-D); the dorsal margin of the articulation in MOR 2919 is defined by a slight ridge also present in Brachylophosaurus. The articulation surfaces in Acristavus and Maiasaura (OTM F138) are very subtly roughened.

Quadratojugal.

No quadratojugals of MOR 2919 are preserved, so it is unknown whether they had a crescentic or noncrescentic posterior margin, and whether this may have contributed to the margin of a paraquadratic foramen. Some specimens of Brachylophosaurus (holotype CMN 8893) have a noncrescentic posterior margin of the quadratojugal and the interpreted presence of a paraquadratic foramen, whereas other specimens (MOR 794, MOR 1071-7-21-98-344) have a crescentic posterior margin of the quadratojugal, and no visible paraquadratic foramen [23].

Skull—Braincase

The braincase elements are fully fused and suture lines are either in the process of being remodeled or are already obliterated (Fig 15), making the contacts of individual elements difficult to define, as in CMN 8893 [23]. Crushing has obscured some cranial nerve foramina. Aside from the features noted below, the overall morphology conforms to that of Brachylophosaurus [1].

thumbnail
Fig 15. Probrachylophosaurus bergei gen. et sp. nov. braincase.

MOR 2919, right lateral view. Abbreviations: abs, alar process of basisphenoid; bo, basioccipital; exo, exoccipital; p, parietal; po, postorbital; ppbs, pterygoid process of basisphenoid; ps, parasphenoid (broken and deflected dorsally); sqs, squamosal suture on parietal, broken; V-XII, cranial nerve foramina.

https://doi.org/10.1371/journal.pone.0141304.g015

The large alar process of the basisphenoid is extremely thin, as in Brachylophosaurus (MOR 1071-7-7-98-86); the proximal-distal striations are more prominent in MOR 2919. The posteroventral process of the basisphenoid is more pronounced in MOR 2919 than in Maiasaura (OTM F138), Acristavus, and some Brachylophosaurus specimens (MOR 1071-7-7-98-86), but smaller than in others (CMN 8893; [23]). In Brachylophosaurus (MOR 1071-7-7-98-86) and Acristavus the pterygoid processes of the basisphenoid are directed nearly entirely laterally, and slightly anteriorly and ventrally. In MOR 2919 and Maiasaura (OTM F138) the pterygoid processes are directed more ventrally than laterally, and slightly posteriorly. Much of this difference may be diagenetic; the braincases of MOR 1071-7-7-98-86 and MOR 1155 are dorsoventrally compressed, MOR 2919 is laterally compressed, and OTM F138 is slightly laterally compressed. The direction of compression likely determines the relative degree of lateral or ventral orientation of the pterygoid processes, and may determine whether the pterygoid processes are directed slightly anteriorly or posteriorly. Thus, the angle between the pterygoid processes of the basisphenoid is not a useful phylogenetic character without first accounting for diagenetic influence on all specimens.

In MOR 2919 as in Brachylophosaurus (CMN 8893, MOR 1071-7-7-98-86), the opening for cranial nerve VII is slightly posteroventral to cranial nerve V, rather than directly posterior as in Acristavus (UMNHVP 16607) [3, 23]. The groove in the opisthotic leading from cranial nerve VIII to the exoccipital is much wider and deeper in Brachylophosaurus (MOR 1071-7-7-98-86) than in MOR 2919. The paraoccipital processes of the exoccipitals barely curve anteriorly, similar to Brachylophosaurus (CMN 8893, MOR 794), and unlike the strong anterior curvature in Acristavus. The region of the posterior-most contacts between the squamosals, supraoccipital, and exoccipitals is broken, but if intact the exoccipital roof would have been short as in Brachylophosaurus (MOR 1071-7-7-98-86).

Palate.

The pterygoids, ectopterygoids, vomers, and palatines are not preserved in MOR 2919. A partial palatine in MOR 1097 is morphologically similar to that of Brachylophosaurus (MOR 1071-7-26-99-221).

Skull—Mandible

Predentary.

The predentary is very poorly preserved, but its relative dimensions are similar to those of Brachylophosaurus (MOR 1071-7-28-98-299), being roughly twice as wide mediolaterally as anteroposteriorly, and having a squared anterolateral corner (Fig 16A). The denticles are not preserved, and the nutrient foramina are crushed and obscured.

thumbnail
Fig 16. Probrachylophosaurus bergei gen. et sp. nov. mandible.

MOR 2919 (A) predentary, ventral view; (B) right dentary, lateral view; (C) right dentary, medial view; (D) right surangular, lateral view; (E) right surangular, medial view; (F) left dentary, lateral view; (G) left dentary, medial view. The anterior portion of the right dentary was crushed mediolaterally, flattening the symphyseal region into a vertical orientation. The coronoid process of the left dentary was fractured, displacing the coronoid process anteromedially. Abbreviations: cp, coronoid process; path, pathology; pes, proximal edentulous slope.

https://doi.org/10.1371/journal.pone.0141304.g016

Dentary.

The dental lamina is extremely thin; in some regions there are ridges corresponding to the median carinae of the teeth, and in other areas the lamina is so thin that the median carinae are exposed, possibly due to postmortem abrasion of the lamina (Fig 16). In Brachylophosaurus (FMNH PR 862), Acristavus, and Maiasaura, the dental laminae are similarly ridged superficial to the carinae. The left dentary of MOR 2919 is larger than any other brachylophosaurin dentary (Table 1), and preserves the complete series of 43 tooth rows. Brachylophosaurus canadensis dentaries contain up to 39 tooth rows (CMN 8893; [33]); other specimens have 33 tooth rows (MOR 1071-8-98-X) and 36 tooth rows (FMNH PR 862). Most dentary tooth rows in MOR 2919 contribute two teeth to the occlusal surface, which is less concave than in other Brachylophosaurini. Typically, each tooth row corresponds to one medial dental foramen. However, the 3rd and 4th anterior tooth rows share the same dental foramen; because the number of tooth rows in hadrosaurids increases ontogenetically [37], this could represent the origin of an additional tooth row, and an additional foramen would develop later. The ventromedial groove that leads to the Meckelian canal originates below or anterior to the first tooth row in Brachylophosaurus (FMNH PR 862, MOR 1071-8-98-W, CMN 8893) [23] and the Maiasaura holotype YPM-PU 22405, but several rows posterior to the first tooth row in MOR 2919, Acristavus, and Maiasaura OTM F138.

The dentary teeth have a prominent median carina with no secondary carinae. The median carinae are straight or rarely extremely subtly sinusoidal in MOR 2919, but many median carinae are subtly sinusoidal in at least one Brachylophosaurus (FMNH PR 862). The edges of the crowns have faint papillae that are much less prominent than the papillae on the maxillary teeth.

MOR 2919 has five anterolateral dental foramina. Brachylophosaurus canadensis may be intraspecifically variable: CMN 8893 has four anterolateral dental foramina [23], but FMNH PR 862 has either four or five anterolateral dental foramina (preservation may be obscuring some foramina). Maiasaura is also intraspecifically variable: YPM-PU 22405 has five foramina, but OTM F138 only has four foramina. Acristavus (MOR 1155) has four foramina.

MOR 2919, Maiasaura (YPM-PU 22405, OTM F138), and Acristavus (MOR 1155) possess a relatively shorter proximal edentulous slope of the dentary than in Brachylophosaurus (CMN 8893, FMNH PR 862, MOR 1071-8-98-W). In Brachylophosaurus and Maiasaura, the edentulous slope is actually horizontal for a few centimeters just anterior to the first tooth row before sloping anteroventrally; in MOR 2919 and Acristavus the anteroventral slope begins immediately anterior to the first tooth row.

Maiasaura (OTM F138, ROM 44770; area broken in holotype YPM-PU 22405) and Brachylophosaurus (CMN 8893, FMNH PR 862, MOR 1071-7-7-02-62-D, MOR 1071-8-98-X) are unique in possessing a dentary coronoid process with a horizontally straight dorsal margin leading to a sharp caudodorsal point (Fig 17). MOR 2919 has the horizontally straight dorsal margin, although it is thin and slightly broken, and appears to lack the caudodorsal point. The caudodorsal point also appears absent in Acristavus (MOR 1155), but the posterodorsal margin of the coronoid process is slightly broken, and so the presence or absence of a caudodorsal point cannot be confirmed. The caudodorsal point develops ontogenetically in Maiasaura and Brachylophosaurus; juveniles have the straight dorsal margin with no point (Maiasaura MOR 547-W-55-2P, Brachylophosaurus MOR 1071-8-1-99-313), similar to the state of the stratigraphically older MOR 2919. The subadult Probrachylophosaurus specimen, MOR 1097, does include a coronoid process, but the dorsal end is broken, so the size and shape of its margins cannot be observed. The presence or absence of a caudodorsal point may be a useful ontogenetic taxonomic character, but because the point is easily taphonomically broken, it may be difficult to determine whether the absence of a caudodorsal point is true or taphonomic in certain specimens.

thumbnail
Fig 17. Taxonomic distribution and ontogenetic development of caudodorsal point on coronoid process of dentary.

Caudodorsal point absent in: Probrachylophosaurus gen. nov. adult, MOR 2919, (A) right coronoid process, anterior margin broken, (B) left coronoid process, dorsal margin broken and entire process fractured and misaligned; (C) Acristavus, MOR 1155, right coronoid process, posterior margin broken. Caudodorsal point develops ontogenetically and with individual variation in Brachylophosaurus: (D) subadult, MOR 1071-8-1-99-313, right coronoid process; (E) subadult, MOR 1071-7-10-98-179, left coronoid process, anterior margin broken; (F) adult, MOR 1071-8-98-X, left coronoid process. Caudodorsal point develops ontogenetically in Maiasaura: (G) juvenile, MOR 547-W-55-2P, left coronoid process; (H) adult, OTM F138, left coronoid process of cast. The original description of OTM F138 [36] includes a photograph of the left dentary with a complete caudodorsal point, but the cast at MOR does not include the caudodorsal point, suggesting that when the resin was poured into the mold, it did not completely fill this area. The missing caudodorsal point is indicated by a black outline traced from the left dentary photograph in Trexler [36].

https://doi.org/10.1371/journal.pone.0141304.g017

Surangular.

The surangular (Fig 16D and 16E) conforms in all respects to the morphology described for Brachylophosaurus [1, 23]. The surangular of Acristavus is also consistent with that of Brachylophosaurus [3]. The articular, splenial, and angular are not preserved.

Postcrania

In nearly all respects, the postcrania of MOR 2919 are consistent with those of Acristavus and Brachylophosaurus.

Vertebrae.

In all collected vertebrae of MOR 2919 (cervicals, dorsals, and caudals), the neural arches are fully fused to the centra, with the suture lines nearly completely obliterated (Figs 18 and 19). Small cervical, dorsal, and caudal vertebrae from the MOR 1071 bonebed either have unfused neural arches found disarticulated from their centra, or are unfused but remained connected. A broken surface on an adult (determined by relative size) Brachylophosaurus canadensis dorsal vertebra MOR 1071-8-18-98-593 demonstrates that internal fusion and remodeling are complete, but the external surface of the suture line is still being remodeled. A dorsal vertebra of MOR 2919 from a similar serial position exhibits very faint remodeled bone texture along the location of sutural fusion.

thumbnail
Fig 18. Probrachylophosaurus bergei gen. et sp. nov. cervical and dorsal vertebrae.

MOR 2919 vertebrae are pictured in anterior view in their approximate order within their series. Serial position of vertebrae is not listed because the complete series of cervicals and dorsals were not preserved, and so their exact serial positions cannot be determined with confidence. However, the last cervical vertebra pictured, “C14”, is consistent with the morphology of cervical 14 in CMN 8893, the holotype of Brachylophosaurus canadensis [23]. Atlas fragments and other vertebral fragments not pictured.

https://doi.org/10.1371/journal.pone.0141304.g018

thumbnail
Fig 19. Probrachylophosaurus bergei gen. et sp. nov. caudal vertebrae.

MOR 2919 vertebrae, neural spines, and chevrons are pictured in left lateral view in their approximate order within their series. Due to the disarticulated and incomplete nature of this caudal vertebral series, exact serial positions cannot be determined with confidence. Gaps between pictured vertebrae indicate noticeably missing segments of multiple vertebrae; additional vertebrae may be missing between any two vertebrae pictured here. Additional caudal vertebral fragments not pictured.

https://doi.org/10.1371/journal.pone.0141304.g019

MOR 2919 includes atlas fragments, 10 well-preserved cervical vertebrae, and fragments of additional cervical vertebrae, for a total of at least 12 cervical vertebrae (Fig 18). One cervical is morphologically consistent with cervical 14 of CMN 8893, the holotype of Brachylophosaurus canadensis [23]. Because the cervical series of MOR 2919 is incomplete, it cannot be determined whether this is actually the 14th vertebra in the series. Prieto-Márquez [25] describes the articulated B. canadensis specimen MOR 794 as having only 13 cervical vertebrae, but Cuthbertson and Holmes [23] note that they may differ in their interpretation of whether the 14th vertebra is a cervical or a dorsal.

Pelvis and hindlimb.

In Brachylophosaurus MOR 1071 specimens, the ischial peduncle of the pubis flares at its tip. In Acristavus and MOR 2919, it is a more rounded enlargement (Fig 20). The lengths of the fully intact limb bones (tibia, fibula, and metatarsal II; Fig 21) are provided in Table 3.

thumbnail
Fig 20. Probrachylophosaurus bergei gen. et sp. nov. pelvic elements.

MOR 2919, all elements in lateral view; (A) left ilium; (B) partial proximal left ischium; (C) right ilium with dashed line indicating missing area; (D) partial proximal right ischium; (E) left pubis; (F) right pubis.

https://doi.org/10.1371/journal.pone.0141304.g020

thumbnail
Fig 21. Probrachylophosaurus bergei hindlimb elements.

MOR 2919 (A) left tibia, lateral view; (B) right tibia, lateral view; (C) left fibula, lateral view; (D) right fibula, lateral view; (E) left astragalus, anterior view; (F) right astragalus, anterior view; (G) right metatarsal II, medial view; (H) right metatarsal IV, medial view.

https://doi.org/10.1371/journal.pone.0141304.g021

Pathologies

Pathologies are present on both dentaries, at least six caudal vertebrae, and two metatarsals. The dentaries of MOR 2919 possess a total of three pathologic circular depressions each surrounded by a ring of raised bone (Fig 16). Six middle caudal vertebrae of MOR 2919 exhibit neural spine pathologies consistent with various degrees of breakage and healing. The pathologies are limited to a single region of the middle of the tail (Fig 19); the caudal series is disarticulated and incomplete, so there may have been additional pathologic vertebrae within this region. The only two metatarsals recovered, the right II and IV, both exhibit pathologic rugose surface texture. The right metatarsal II has this rugose texture on much of its contact surface with metatarsal III, and nowhere else. The right metatarsal IV has the rugose texture concentrated on its medial contact surface with metatarsal III, as well as it distal posterolateral surface. Metatarsal III was not recovered, but presumably would have suffered from a similar pathology. The distal ends of both tibiae and both fibulae exhibit patches of pathologic surface texture, suggesting that both feet may have been similarly affected. The pathologies of MOR 2919 will be described and discussed in detail in a later paper.

Summary of Morphologic Comparisons Among Probrachylophosaurus and Other Brachylophosaurins

In cases where cranial morphology can be directly compared between Probrachylophosaurus, Acristavus, Brachylophosaurus, and Maiasaura, Probrachylophosaurus is always more similar to Acristavus or Brachylophosaurus than it is to Maiasaura. Of the cranial elements well-preserved in the Probrachylophosaurus material, those with the most useful features for comparing brachylophosaurins are the jugal, lacrimal, nasal, frontal, squamosal, quadrate, braincase, and dentary.

The palatine process of the jugal in subadult Probrachylophosaurus (MOR 1097) is identical to the stratigraphically older Acristavus, but the palatine process of the jugal in adult Probrachylophosaurus (MOR 2919) is most similar to the stratigraphically younger Brachylophosaurus. The palatine process in Maiasaura is more similar to Acristavus and subadult Probrachylophosaurus than to Brachylophosaurus and adult Probrachylophosaurus. The caudoventral apex of the rostral process of the jugal is posterior to the caudodorsal apex in both Probrachylophosaurus and Acristavus; the apices are vertically aligned in Brachylophosaurus. Maiasaura possesses an intermediate condition. The ventral margin of the rostral process of the jugal is nearly straight in Probrachylophosaurus, Acristavus, and Maiasaura, but sigmoidal in Brachylophosaurus. The concavity of the posterior jugal margin is shallow in Probrachylophosaurus, Acristavus, and Maiasaura, but deeper in Brachylophosaurus. The medial excavation of the quadratojugal process of the jugal is shallowest in Probrachylophosaurus, less shallow in Acristavus, and deepest in Brachylophosaurus and Maiasaura. The mediolateral width of the lacrimal is more thick and robust in Probrachylophosaurus and Acristavus than in Brachylophosaurus and Maiasaura.

Probrachylophosaurus and Brachylophosaurus are united by having a solid nasal crest overhanging the dorsal skull roof; Acristavus lacks any crest, and Maiasaura has a crest formed by the dorsal projection of both the nasals and frontals [3, 5, 6, 33]. The nasal crest of the smaller adult (“slender”) Brachylophosaurus resembles a hypermorphic form of a Probrachylophosaurus crest, extending the crest posteriorly and laterally. The larger adult (“robust”) Brachylophosaurus crest continues this growth trajectory, with the posterolateral growth forming a flat paddle shape. These taxa have the same pattern in their nasofrontal articulation; subadult Brachylophosaurus and adult Probrachylophosaurus possess a nasofrontal articulation covering slightly over half of the dorsal frontal surface, whereas adult Brachylophosaurus have a larger nasofrontal articulation that covers the entire dorsal frontal surface.

The frontal contribution to the orbital margin is more similar in Probrachylophosaurus and Acristavus than either is to that of Brachylophosaurus. The prequadratic process of the squamosal in Probrachylophosaurus is more similar to that of subadult Brachylophosaurus than adult Brachylophosaurus or Acristavus. The postquadratic process of the squamosal is similar in Probrachylophosaurus, Acristavus, and Brachylophosaurus, and different from that of Maiasaura. The posterior end of the postorbital-squamosal articulation occurs just anterior to the middle of the quadrate cotylus in Acristavus, in the middle of the cotylus in Probrachylophosaurus and some Brachylophosaurus specimens (FMNH PR 862), and just posterior to the middle in other Brachylophosaurus (MOR 794, MOR 1071-7-7-98-86). In Probrachylophosaurus and Acristavus, the squamosals contact each other. In Maiasaura, the squamosals are partially separated by the parietal, and in Brachylophosaurus, the squamosals are completely separated by the parietal. The location of cranial nerve VII, as well as the curvature of the paraoccipital processes of the exoccipitals, are more similar in Probrachylophosaurus and Brachylophosaurus than either taxon is to Acristavus.

The size and shape of the posterodorsal process of the quadrate is similar in Probrachylophosaurus and Brachylophosaurus. The process in Acristavus is shorter and smaller; the process in Maiasaura is intermediate between Probrachylophosaurus and Acristavus. The quadrate posterior margin is straight in Probrachylophosaurus and Acristavus, but curved in Brachylophosaurus and Maiasaura.

The position of the ventromedial groove of the dentary of Probrachylophosaurus is more similar to Acristavus and Maiasaura OTM F138 than to Brachylophosaurus or Maiasaura YPM-PU 22405. The proximal edentulous slope of the dentary is shorter in Probrachylophosaurus, Maiasaura, and Acristavus than it is in Brachylophosaurus. The proximal-most portion of the edentulous slope is immediately sloping in Probrachylophosaurus and Acristavus, but horizontal in Brachylophosaurus and Maiasaura.

Probrachylophosaurus exhibits a unique combination of characters that make it morphologically intermediate between Acristavus and Brachylophosaurus. Probrachylophosaurus is most similar to Acristavus in overall morphology of the jugal and lacrimal. The morphologies of the frontal, quadrate, and squamosal are more similar to Acristavus in some attributes, but more similar to Brachylophosaurus in others. The braincase of Probrachylophosaurus is most similar to Brachylophosaurus. The presence of a posteriorly-oriented nasal crest also unites Probrachylophosaurus with Brachylophosaurus. The dentary is more similar to that of Acristavus than to Brachylophosaurus. These relationships of morphological similarities and differences were analyzed in more detail using phylogenetic analyses.

Phylogenetic Analyses

Analyses based on matrix of Prieto-Márquez [29]

Probrachylophosaurus bergei was coded into two versions of the matrix of Prieto-Márquez [29]. The first version included some recodings of previous taxa, with all characters included. The second version included these same recodings, but excluded some characters as detailed below.

The first analysis using the Prieto-Márquez [29] matrix included recodings of eight characters for Acristavus based on reexamination of the material. See Prieto-Márquez [29] for complete descriptions of characters and abbreviation codes (e.g., J4 is the fourth jugal character). Character 106 (J4), the relative position of the caudoventral apex of the rostral process of the jugal, was changed from state 1 to 0. Probrachylophosaurus is also coded as 0; Brachylophosaurus and Maiasaura are state 1. The quadrate of the Acristavus holotype (MOR 1155) was not coded into the original matrix, so it has been added here, replacing characters 116–121 (Q1-Q6)?????? with 011211. These are the same codings as the quadrate of Probrachylophosaurus and Brachylophosaurus; Maiasaura has states 001211. Character 259 (PB8), the length/width ratio of the ischial peduncle of the pubis, was recoded from 0 to 1 for Acristavus; Probrachylophosaurus, Brachylophosaurus, and Maiasaura are also state 1.

In Brachylophosaurus, Character 138 (F1) was originally coded as state 0, indicating the lack of bifurcation of the anterior frontal margin. However, this is only true for some adult specimens (e.g. GPDM JRF.65); the “slender” adult Brachylophosaurus MOR 1071-7-7-98-86 and subadults MOR 1071-7-13-99-87-I and MOR 1071-C-3-3 have bifurcated anterior frontal margins, so this was recoded to the multistate “01”.

When Probrachylophosaurus bergei is added to Prieto-Márquez’s [29] matrix, with extraneous taxa removed and some character states recoded (see above), but all characters included (S1 File), four most parsimonious trees were produced. The strict consensus tree recovers Brachylophosaurus and Maiasaura as sister taxa, with Probrachylophosaurus and Acristavus forming a basal polytomy within Brachylophosaurini (S2 Fig). Characters responsible for the position of Probrachylophosaurus included: 1 (dtth1), number of dentary tooth positions; 15 (mxth1), number of maxillary tooth positions; 36 (dt4), angle of the ventral rostral margin of the dentary; 44 (dt13), lack of caudodorsal point on coronoid process of dentary; 106 (j4), relative positions of caudodorsal and caudoventral apices of rostral process of jugal; 110 (j8), size of caudoventral flange of jugal; 113 (j11), ratio of caudal and rostral constrictions of jugal; and 143 (f6), contribution of the frontal to the orbital margin. The bootstrap 50% majority-rule consensus tree (5,000 replicates) finds 55% support for a Probrachylophosaurus-Brachylophosaurus-Maiasaura clade, with Acristavus as the basal member of Brachylophosaurini, and 64% support for Brachylophosaurus and Maiasaura as sister taxa.

Three of Prieto-Márquez’s [29] characters were then excluded from the second analysis. Characters 1 (dtth1) and 15 (mxth1) are based on the number of teeth in the dentary and maxilla, respectively. The number of teeth in hadrosaurid jaws increases ontogenetically [37, 38], so the high tooth counts in MOR 2919 are liable to be due to the specimen’s size and maturity rather than a true phylogenetic signal separating it from Brachylophosaurus and Maiasaura. Character 123 (pf2) describes the shape of the prefrontal contribution to the orbital margin. Many specimens of Brachylophosaurini examined in this study are intermediate between the character states, and so this character was excluded to avoid ambiguous state assignments.

Character 143 (f6) in Prieto-Márquez [29] is a modification of character 57 in Horner et al. [28]. The contribution of the frontal to the orbital margin is either present or absent in Horner et al. [28], but Prieto-Márquez [29] divides presence into two states, frontal exposed and forming part of orbital margin, or forming a narrow triangular apex that may or may not reach the orbital margin between the prefrontal and postorbital. This division is problematic because the width of the orbital contribution of the frontal is intraspecifically variable in Brachylophosaurus (MOR 1071 braincases, FMNH PR 862), and potentially may vary similarly in other taxa that currently have smaller sample sizes. Also, the distinction between the two states (frontal forming part of orbital margin or doing so through a narrow triangular apex) is not well defined. Prieto-Márquez [29] codes Acristavus, Brachylophosaurus, and Maiasaura as having the narrow triangular apex, but their contribution to the orbital margin can be more than 1 cm and not triangular. Thus, the frontal contribution to the orbital margin, when present, forms a continuum rather than two discrete states. End members are clear, but most brachylophosaurin specimens fall in between the end points, and so the original version of the character (simply presence or absence of frontal contribution to the orbital margin) in Horner et al. [28] is preferred. Consequently, character 143 (f6) was recoded to merge states 0 and 1, so there are only two states (presence or absence) rather than three.

After these exclusions and recodings (S2 File), two most parsimonious trees were produced. The strict consensus tree recovers Acristavus as the basal member of Brachylophosaurini, with Brachylophosaurus and Maiasaura as sister taxa, and Probrachylophosaurus in an intermediate position (Fig 22). Probrachylophosaurus, Brachylophosaurus, and Maiasaura, but not Acristavus, share one apomorphic character state: 134 (sq1) state 0, very short precotyloid process of the squamosal. Probrachylophosaurus differs from Acristavus, Brachylophosaurus, and Maiasaura in its state for three characters: 36 (dt4) state 2, angle of the ventral rostral margin of the dentary; 110 (j8) state 1, size of the caudoventral flange of the jugal; and 113 (j11) state 2, ratio of caudal and rostral constrictions of the jugal; these character states are homoplasies shared with non-brachylophosaurin hadrosaurine taxa. Brachylophosaurus and Maiasaura are united as sister taxa due to two characters: 44 (dt13) state 1, the autapomorphic presence of a caudodorsal point on the coronoid process of the dentary; and 106 (j4) state 1, relative positions of caudodorsal and caudoventral apices of the rostral process of the jugal. Compared to the previous result, this bootstrap 50% majority-rule consensus tree finds increased (66%, was 55%) support for a Probrachylophosaurus-Brachylophosaurus-Maiasaura clade, with Acristavus as the basal member of Brachylophosaurini, and decreased (56%, was 64%) support for Brachylophosaurus and Maiasaura as sister taxa.

thumbnail
Fig 22. Time-calibrated cladogram of hadrosaurines based on Prieto-Márquez [29].

The strict consensus of two most parsimonious trees resulting from adding Probrachylophosaurus bergei gen. et sp. nov. to Prieto-Márquez’s [29] matrix with minor character recodings and exclusions as discussed in text was plotted using the age ranges for each taxon; branch lengths do not reflect the number of character state changes. Values on branches represent bootstrap support; branches without values had less than 50% support. Tree statistics: shortest tree length = 614, Consistency Index = 0.72, Retention Index = 0.68, Rescaled Consistency Index = 0.49. Age ranges of Brachylophosaurini are those recalibrated in Fig 1; age ranges of other taxa are approximate, and are based on unrecalibrated previously published dates [3, 7, 13, 15, 3948]. Note that the age scale changes before and after 80 Ma. Also note that the age of Bactrosaurus has been variably proposed to be any time from late Turonian to early Maastrichtian in age [4951].

https://doi.org/10.1371/journal.pone.0141304.g022

Analysis based on matrix of Gates et al. [3]

When Probrachylophosaurus bergei is added to Gates et al.’s [3] matrix, with extraneous taxa removed (see Methods), but all characters included (S3 File), two most parsimonious trees were produced. The strict consensus tree recovers Probrachylophosaurus and Brachylophosaurus as sister taxa, with Acristavus as the basalmost member of Brachylophosaurini (Fig 23). Probrachylophosaurus, Brachylophosaurus, and Maiasaura, but not Acristavus, share two apomorphic character states: character 36 state 1, presence of solid nasal crest; and character 37 state 1, circumnarial fossa terminates anterior to nasal crest. Acristavus, Probrachylophosaurus, and Maiasaura, but not Brachylophosaurus, share one apomorphic character state: character 53 state 0, straight to slightly curved ventral margin of the rostral process of the jugal. Probrachylophosaurus and Brachylophosaurus are united as sister taxa due to one apomorphic character state: character 105 state 0, postacetabular process is less than 40 percent the total length of the ilium. Probrachylophosaurus differs from Acristavus, Brachylophosaurus, and Maiasaura in its state for one character: character 72 state 0, low basipterygoid transverse ridge of the basisphenoid. The bootstrap 50% majority-rule consensus tree (50,000 replicates) finds 50% support for Probrachylophosaurus and Brachylophosaurus as sister taxa, with the positions of Acristavus and Maiasaura having less than 50% support.

thumbnail
Fig 23. Time-calibrated cladogram of hadrosaurines based on Gates et al. [3].

The strict consensus of two most parsimonious trees resulting from adding Probrachylophosaurus bergei gen. et sp. nov. to Gates et al.’s [3] matrix was plotted using the age ranges for each taxon; branch lengths do not reflect the number of character state changes. Because species within the same genus had the same codings, only genera are listed in the phylogeny. Values on branches represent bootstrap support; branches without values had less than 50% support. Tree statistics: shortest tree length = 188, Consistency Index = 0.70, Retention Index = 0.65, Rescaled Consistency Index = 0.45. Age ranges are approximate, and are based on those in Gates et al. [3], aside from Brachylophosaurini, which have been recalibrated as in Fig 1. Note that the age scale changes before and after 80 Ma. Also note that the age of Bactrosaurus has been variably proposed to be any time from late Turonian to early Maastrichtian in age [4951].

https://doi.org/10.1371/journal.pone.0141304.g023

Phylogenetic Relationships

Brachylophosaurini is supported as a robust clade in all recent phylogenetic analyses, but the relationships amongst its members vary. Prior to the description of Acristavus gagslarsoni, this clade consisted solely of Maiasaura peeblesorum and Brachylophosaurus canadensis [1, 28, 43]. Prieto-Márquez [29] recovered Maiasaura and Brachylophosaurus as sister taxa, with Acristavus (“Two Medicine OTU”) as the basal member of the clade. However, Gates et al. [3] recovered Acristavus and Maiasaura as sister taxa.

When Probrachylophosaurus is added to the Prieto-Márquez [29] and Gates et al. [3] matrices, it is recovered with confidence as a member of Brachylophosaurini (bootstrap support 87% in both analyses). Acristavus is recovered as the basal taxon in all analyses, consistent with its stratigraphic position; thus, Acristavus or a close relative was likely ancestral to the rest of Brachylophosaurini. The inclusion of Probrachylophosaurus in the Prieto-Márquez [29] matrix still results in Maiasaura and Brachylophosaurus as sister taxa, but with much weaker bootstrap support for the clade (56% vs. 69% in [29]). Probrachylophosaurus is recovered as intermediate between Acristavus and the Brachylophosaurus-Maiasaura clade. The inclusion of Probrachylophosaurus in the Gates et al. [3] matrix yields Probrachylophosaurus and Brachylophosaurus as sister taxa, with Maiasaura intermediate between them and Acristavus. The differing positions of Maiasaura relative to Probrachylophosaurus and Brachylophosaurus in each analysis leads to uncertainty regarding the timing of the cladogenic split between the Brachylophosaurus and Maiasaura lineages. The analysis based on the Gates et al. [3] matrix suggests that Maiasaura diverged from the Probrachylophosaurus-Brachylophosaurus lineage sometime between the stratigraphic existence of Acristavus and Probrachylophosaurus (Fig 23). The analysis based on the Prieto-Márquez [29] matrix suggests that the Maiasaura lineage either diverged from the Brachylophosaurus lineage sometime between the stratigraphic existence of Probrachylophosaurus and Brachylophosaurus, or Maiasaura is derived from Brachylophosaurus (Fig 22).

In the analysis based on the Prieto-Márquez [29] matrix, Brachylophosaurus and Maiasaura are united by two characters: 44 (dt13) caudodorsal point on the coronoid process of the dentary and 106 (j4) position of the caudoventral apex of the rostral process of the jugal relative to the caudodorsal margin of the rostral process. The caudodorsal point on the coronoid process of the dentary is potentially very useful for taxon identification, but is also problematic. The caudodorsal margins of Brachylophosaurini coronoid processes are very thin, and are broken in many specimens. The caudodorsal margins of the coronoid processes of Acristavus and Probrachylophosaurus are extremely thin and partially broken; they do not preserve points, and the thinness of the bone seems to indicate that there could not have been a point, but this cannot be confirmed with absolute confidence. Also, the caudodorsal point enlarges ontogenetically in Brachylophosaurus and Maiasaura; small individuals lack the point entirely. Thus, the maturity of a specimen lacking the caudodorsal point must be considered before including it in phylogenetic analyses. The Acristavus and Probrachylophosaurus holotypes are from large enough individuals that they should display the adult condition for this character. Character 106 (j4) concerns the relative positions of the caudodorsal and caudoventral points of the rostral process of the jugal. Maiasaura is coded as having the same state as Brachylophosaurus; the caudoventral point is directly ventral to the caudodorsal point, rather than being posterior to the caudodorsal point as it is in Acristavus and Probrachylophosaurus. However, in Maiasaura, the caudoventral point is slightly posterior to the caudodorsal point, and so is actually intermediate between the states of Acristavus-Probrachylophosaurus and Brachylophosaurus. In summary, the phylogenetic analyses concur in placing Acristavus as the basal-most member of the Brachylophosaurini, consistent with its relative stratigraphic position, but the relationships among Probrachylophosaurus, Brachylophosaurus, and Maiasaura vary depending on the cladistic matrix used.

Histology

The left tibia of MOR 2919 includes 14 lines of arrested growth (LAGs) (Figs 24 and 25). Because LAGs represent annual interruptions in bone growth [52], this indicates that MOR 2919 was 14 years old at time of death. The outermost LAGS (11–14) are closely spaced, yet still retain vascularity, and so cannot be considered an External Fundamental System (EFS). This indicates that MOR 2919 was still increasing its tibia circumference, and therefore presumably still increasing it body length and body mass, at time of death.

thumbnail
Fig 24. Tibial histology of MOR 2919, mid-diaphyseal cross-section.

Numbered green arrows identify lines of arrested growth (LAGs). The closely spaced outer LAGs are indicated with tick marks along a green line. Numbers around the circumference of the cross-section indicate the number of LAGs preserved in that radial segment of the tibia. Note that diagenetic crushing has displaced several segments radially inward. Thumbnail image in lower right corner colors the area between each pair of LAGs to highlight locations of radial displacement as well as to indicate bone deposition between later LAGs occurring primarily along the posteromedial region. A high-resolution version of this figure is available at http://www.morphobank.org/index.php/Projects/Media/id/377387/project_id/2157.

https://doi.org/10.1371/journal.pone.0141304.g024

thumbnail
Fig 25. Outer cortical histology of MOR 2919 tibia.

This is a higher-resolution image of the posteromedial cortex pictured in Fig 24, as indicated by the black box on the upper right thumbnail image of the entire mid-diaphyseal cross-section. Numbered green arrows identify lines of arrested growth (LAGs), including the multiple lines of LAG zone 8 (see text). A high-resolution version of this figure is available at http://www.morphobank.org/index.php/Projects/Media/id/377388/project_id/2157.

https://doi.org/10.1371/journal.pone.0141304.g025

Bone apposition rates in hadrosaurids are generally greater on the posteromedial side of the cortex than on the anterolateral cortex (H. N. Woodward, personal communication 2013). In MOR 2919, this produced thicker zones between early LAGs on the posteromedial side. Later, bone deposition continued on the posteromedial side while it had ceased on the lateral side, resulting in the highest number of LAGs (14) countable on the posteromedial side, with the number of LAGs decreasing along the posterolateral (12–8 LAGs) and anteromedial (13–11 LAGs) cortex, and the fewest number of LAGs (8) countable on the lateral cortex (Fig 24). LAGs 1–12 are well defined and visible at 10x total magnification. When present, LAGs 13 and 14 are visible at 40x total magnification. LAG 13 is visible as a darkened band that sometimes contains one or more lines. Thus, LAG 13 may not actually be a LAG, but may instead be an annulus, which represents an annual marker of growth that slowed but did not actually stop as it would in a LAG. LAG 14, when present, is extremely close to the outer surface of the cortex.

Generally, the zone thickness (spacing between LAGs) decreased each year, indicating a faster growth rate in the first few years of life, followed by a gradual decrease in growth rate (Fig 26). However, LAGs 5, 6, and 7 are relatively closely spaced, with wider growth zones occurring between later LAGs. This may indicate that the two growing seasons in between LAGs 5 and 6, and 6 and 7, were stressful times of low access to resources, and so growth was limited.

thumbnail
Fig 26. Growth curves of tibial cortical circumference at each line of arrested growth in Probrachylophosaurus bergei gen. et sp. nov. (MOR 2919) and Maiasaura peeblesorum (MOR 758 NC-7-4-96-16 “T46”).

Age in years was determined by counting the number of lines of arrested growth within the tibial cortex. MOR 2919 left tibia is 119 cm long. Maiasaura data are taken from the largest tibia with complete histologic data (93 cm long) from Woodward et al. [53]. Inflection points in the growth of Probrachylophosaurus occur at 5 years and 10 years; these inflection points occur earlier in Maiasaura, at 2–3 years and 8 years. In Maiasaura, the first inflection point is interpreted as sexual maturity, and the second inflection point occurs at the initiation of the external fundamental system (EFS), representing skeletal maturity [53]. Although MOR 2919 has an apparent second inflection point, it does not possess an EFS, so it is not skeletally mature.

https://doi.org/10.1371/journal.pone.0141304.g026

LAG 8 is actually a zone of one to five closely spaced lines occurring after a zone of typical annual bone deposition (Fig 25). Similar to the locations of outermost LAG deposition, LAG zone 8 contains the most lines (five) on the posteromedial side of the tibia, decreasing incrementally around the circumference, with a single line along the anterolateral to posterolateral sides. This LAG zone is interpreted as the result of a mild “unfavorable season” (sensu Köhler et al., 2012), perhaps a mild winter, during which small increments of bone deposition occurred between multiple pauses in growth, rather than the typical single cessation of growth for the entire unfavorable season. The circumference of LAG 8 was measured at the outermost line of the zone, because the outer circumference of this line marks the resumption of growth in the favorable season, as it does for all other LAGs.

The bone is minimally remodeled, such that LAG 1 is clearly visible along most of its circumference, and still faintly visible on the anterior side where secondary osteons mostly obscure the original bone texture. Secondary osteons are mainly confined to the area between the medullary cavity and LAG 1. Isolated secondary osteons are also scattered sparsely throughout the cortex. The only area of intensive remodeling outside of LAG 1 occurs as a narrow “fountain” of secondary osteons leading from the medullary cavity to the anterolateral outer cortex (Fig 27). This location corresponds to the anterolateral border of the tibia, along which runs the M. tibialis anterior. Dilkes [54, 55] notes that in turtles, Sphenodon, and squamates, the M. tibialis anterior originates on the anterior, medial, and lateral sides of the diaphysis of the tibia, whereas in crocodilians it originates from the proximolateral surface of the tibia, and in birds it originates on the lateral outer cnemial crest of the tibia and the anterior external condyle of the femur. Dilkes [54, 55] reconstructed the M. tibialis anterior of Maiasaura as originating on the cnemial crest of the proximal tibia due to the presence of muscle scarring on the cnemial crest. If the origin of the M. tibialis anterior actually covered a larger area, continuing down the anterolateral tibial diaphysis, then the “fountain” of secondary osteons along the anterolateral border of MOR 2919 may be due to it being a muscle attachment area; however, the cortical surface is smooth, with no scarring indicative of muscle attachment. Alternatively, the anterolateral border of the tibia may simply be an area subjected to great compressive or extensive stress, triggering Haversian remodeling.

thumbnail
Fig 27. Remodeled “fountain” of secondary osteons on anterolateral side of cortex, MOR 2919 tibia.

Margins of the remodeled region are indicated with dashed green lines. Numbered green arrows identify lines of arrested growth. Dark areas near edge of cortex are sections of bone that began to separate from the slide, requiring additional adhesive. Black box on the thumbnail image on lower right indicates location of Fig 27 within the entire tibial cross-section. A high-resolution version of this figure is available at http://www.morphobank.org/index.php/Projects/Media/id/377389/project_id/2157.

https://doi.org/10.1371/journal.pone.0141304.g027

This remodeled region is possibly similar to the “anterolateral plug” in a Dysalotosaurus (Ornithischia: Dryosauridae) tibia [56], but the “fountain” in MOR 2919 is a continuous band of fairly consistent width connecting the medullary cavity to the periosteal surface and is nearly entirely composed of secondary osteons; the “plug” in Dysalotosaurus is “whirl-like” and may not extend to the medullary cavity or the periosteal surface. The “plug” is initially composed of randomly oriented primary osteons, and later contains a higher density of secondary osteons than are found in other areas of the tibial cross-section; it is interpreted as forming due to this area being a muscle attachment site [56]. The “fountain” of MOR 2919 and “anterolateral plug” of Dysalotosaurus are similar in their location and presence of secondary osteons, but the radial extent and degree of remodeling are much greater in MOR 2919. Adult Maiasaura also have concentrations of secondary osteons on the anterior side of the tibia that remodel the radial vascularity of the primary bone tissue in this area; Woodward et al. [53] hypothesize that this remodeling results from muscle insertion on the anterior tibial border.

Histologic Maturity

The growth inflection points (Fig 26) occur later in MOR 2919 than in Maiasaura, indicating later sexual and skeletal maturation. Whereas Maiasaura is hypothesized to reach sexual maturity between two and three years of age [53], the corresponding inflection point in the growth of MOR 2919 occurs at 5 years of age. This suggests that Probrachylophosaurus had delayed sexual maturity relative to Maiasaura.

At the second inflection point, Maiasaura begins depositing an external fundamental system (EFS), indicating skeletal maturity [53]. MOR 2919 decreases its growth rate at the second inflection point, but does not deposit an EFS, so it has not yet reached true skeletal maturity. This second decrease in growth rate occurs later in MOR 2919 (10 years) than in the largest sampled Maiasaura tibia (8 years). The later achievement of the second inflection point, as well as the lack of an EFS, suggests that Probrachylophosaurus attained skeletal maturity later than Maiasaura. However, the age of skeletal maturity in Maiasaura is individually variable (Woodward et al. in review), so a greater sample size of Probrachylophosaurus is needed to determine whether the apparent delayed maturation relative to Maiasaura is real or simply reflects individual variation in growth rates. In either case, MOR 2919’s histology suggests that Probrachylophosaurus is a larger-bodied taxon than Maiasaura at all growth stages.

Although MOR 2919 lacks an EFS, its histology confirms that its growth rate had greatly slowed and it was possibly somewhat near skeletal maturity. Thus, its “adult” status is supported by three independent lines of evidence: histology, large body size, and externally fused and remodeled axial sutures. The term “adult”, as applied to MOR 2919, is used to indicate that this is not a subadult specimen that may reasonably be expected to grow a full paddle-shaped nasal crest as seen in Brachylophosaurus canadensis. Its skull and body size, compared to the size distribution of its close relative B. canadensis, clearly categorize it as an adult sensu Evans [26]. However, because MOR 2919 has not attained an EFS, it is technically not skeletally mature, and by some definitions (e.g., [57]) would not be considered an adult. In this paper, MOR 2919 is considered an adult, and a fully skeletally mature specimen with an EFS would be considered a “senescent adult”.

MOR 794, a large “adult” Brachylophosaurus canadensis, is similar to MOR 2919 in that it also has not yet deposited an EFS (Fig 28). The LAGs in the outermost cortex of the femur of MOR 794 are more widely spaced than those of MOR 2919; the outermost 3 mm of the femur of MOR 794 contain only one LAG, whereas the outermost 3 mm of the tibia of MOR 2919 contain five LAGs (Fig 25). Thus, MOR 2919, with its smaller nasal crest, is at a slightly later ontogenetic stage than MOR 794, and so MOR 2919 cannot represent an immature stage of Brachylophosaurus canadensis.

thumbnail
Fig 28. Outer cortical histology of MOR 794 Brachylophosaurus canadensis femur.

The right femur (length 129.5 cm) of MOR 794 was histologically sampled using a core of the outer cortex of the anteromedial mid-diaphysis rather than a complete cross-section of the mid-diaphysis, so the complete LAG record was not sampled and the individual’s age in years is unknown. Green arrow indicates the outermost LAG. Cortical surface is on the right.

https://doi.org/10.1371/journal.pone.0141304.g028

Discussion

Ontogeny is intimately tied to evolution, as in a very general sense, ontogeny recapitulates phylogeny [58, 59]. This is often expressed in juvenile dinosaurs, which may bear morphologic traits of their adult ancestors (peramorphy) that are not expressed in the adults of the later taxon, e.g. juvenile Bactrosaurus dentition resembling that of iguanodonts [60]. Because juveniles may retain ancestral characteristics, without proper stratigraphic data they may be mistaken as older, more basal taxa. Indeed, when juvenile specimens are coded into a phylogenetic matrix, they are placed more basally on the resulting cladogram than are adults of that taxon [61, 62].

Within hadrosaurine and lambeosaurine skulls, the most drastic ontogenetic changes occur in the morphology of the premaxillae, nasals, and supraoccipitals [63]. As the individual grows, its premaxillae and nasals generally enlarge and change shape to form the crest [63], with the crest typically moving posteriorly during ontogeny [38, 64]. Bones far from the incipient crest (quadrates, dentaries, and maxillae) change the least [63]. The number of tooth rows increases [37, 38], articular surfaces become more rugose, and the relative size of the orbit decreases [37]. These general trends are observed in both Probrachylophosaurus and Brachylophosaurus.

The nasal crest of Brachylophosaurus canadensis enlarges late in ontogeny. Prieto-Márquez [1] separated Brachylophosaurus specimens into “slender” and “robust” morphotypes, and stated that these individuals were approximately the same size. Although specimens of the two morphotypes have roughly the same interorbital and postorbital widths [1, 23], these widths have been affected by diagenetic compression. The robust specimen MOR 794 is laterally compressed, decreasing its cranial width; the slender specimens MOR 1071-7-7-98-86 and MOR 1071-7-16-98-248 are dorsoventrally compressed, increasing their cranial widths. Thus, although their apparent sizes are similar, after accounting for differential compression slender Brachylophosaurus specimens are slightly smaller than robust specimens. Slender and robust Brachylophosaurus specimens are both found in nearly the same horizons at Malta, Montana, and are therefore most parsimoniously ontogenetic stages of the same species. Cuthbertson and Holmes [23] noted that the slender and robust morphotypes are not discrete; Brachylophosaurus specimens such as FMNH PR 862 and TMP 1990.104.001 possess crests of intermediate sizes. The presence of intermediate crest morphologies supports individual or ontogenetic variation. Also, individual variation in body size could account for the presence of specimens with different crest sizes at similar body sizes.

Like many dinosaur taxa, hadrosaurids reached nearly their full adult size relatively quickly, and then grew increasingly slowly for the rest of their lives [65]. In modern animals such as cassowaries, the cranial crest grows rapidly late in ontogeny, often after the rate of skeletal growth has greatly slowed and the individual is nearly at full adult size [66]. A near-adult cassowary with a skull length of 165 mm possesses a small incipient crest, and after a mere 5 mm (3%) of additional growth in skull length, acquires a full adult casque that covers most of the dorsal skull. Pachycephalosaurus and Stegoceras juveniles have flat skulls, gaining their distinctive frontoparietal domes later in ontogeny [67, 68]. Centrosaurine ceratopsids also developed their pronounced cranial ornamentation late in ontogeny [69]. The nasal crests of slender and robust Brachylophosaurus follow this pattern of rapidly increasing crest size with a very small increase in overall skull size.

In Brachylophosaurus, the nasal crest elongates and flattens posteriorly ontogenetically, and the posterior margin of the nasofrontal suture migrates posteriorly as well. In MOR 2919, the nasofrontal suture is anteriorly placed as in a subadult Brachylophosaurus, and the nasal crest is shorter than that of any adult Brachylophosaurus. Yet, MOR 2919 is not a subadult; in addition to its large size, the braincase elements and vertebral neural arches are completely fused externally, with most sutures obliterated, and histology confirms that MOR 2919 was nearing skeletal maturity. In slender adult Brachylophosaurus (MOR 1071), cranial sutures are still clearly defined, and sutures are still visible in the robust morphology of adult Brachylophosaurus (MOR 794). Although all sutures of braincase elements of MOR 2919 are fused and nearly obliterated, the nasofrontal suture and internasal suture are disarticulated and show no indications of fusion. The nasofrontal suture in Brachylophosaurus becomes more rugose ontogenetically, stabilizing the suture as the nasal crest grows. The lack of nasofrontal fusion in MOR 2919 suggests that the nasal crest was still enlarging at time of death.

The holotype of Brachylophosaurus goodwini (UCMP 130139) and MOR 2919 were both collected from the Kennedy Coulee area, but the Brachylophosaurus goodwini holotype was located stratigraphically lower in the coulee. Unfortunately, UCMP 130139 does not preserve the posterior nasals, which are a critical character in defining Probrachylophosaurus bergei. UCMP 130139 is adult-sized, and its frontals exhibit an anteriorly-located nasofrontal suture that does not cover the entire frontals, similar to that of MOR 2919 and subadult Brachylophosaurus canadensis. This supports UCMP 130139 and MOR 2919 being more closely related than either is to B. canadensis. However, UCMP 130139 exhibits anomalously deep frontal depressions that preclude it from being referred to P. bergei. If the deep frontal depressions are not pathologic, taphonomic, diagenetic, or individual variation, then they may potentially be used as an autapomorphy to resurrect the species “B.” goodwini, although it will need a different genus name. Given the poor preservational condition of the frontals of UCMP 130139, the specimen should be referred to Brachylophosaurini indet. pending additional specimens with similar frontal depressions.

The morphologies of elements of Probrachylophosaurus are consistently more similar to members of Brachylophosaurini than to other hadrosaurids. Within Brachylophosaurini, elements of Probrachylophosaurus are either most similar to Brachylophosaurus or Acristavus, or intermediate between these taxa, as predicted by their relative stratigraphic positions. This supports the hypothesis of Probrachylophosaurus bergei representing an intermediate taxon within the Acristavus-Brachylophosaurus lineage (Fig 29).

thumbnail
Fig 29. Ontogenetic and anagenetic hypothesis of brachylophosaurin evolution.

Probrachylophosaurus bergei gen. et sp. nov. is proposed as an intermediate member of the lineage leading from Acristavus gagslarsoni to Brachylophosaurus canadensis. Shaded blue areas indicate known elements of Probrachylophosaurus. Skull outlines of Acristavus and Brachylophosaurus are used courtesy of Terry A. Gates. The reconstruction of the MOR 1071 Brachylophosaurus skull is a composite of an articulated skull roof with a scaled-down copy of the MOR 794 skull outline. All skulls are scaled to the same 10 cm scale bar. The horizontal axis is not to scale; the MOR 1071 reconstruction is much closer to MOR 794 in size and hypothesized maturity than MOR 1097 is to MOR 2919. Radiometric ages have been recalibrated to the Fish Canyon sanidine standard (28.305 +/- 0.036 Ma) of Renne et al. [10] from the originally published values [3, 1113]; see text and Table 1 for further recalibration details. The age of the Acristavus holotype was precisely estimated by Gates et al. [3]. The age of the Comrey Sandstone Zone of the Oldman Formation is not tightly constrained, leading to uncertainty in the exact age of Brachylophosaurus.

https://doi.org/10.1371/journal.pone.0141304.g029

In some morphologic characters within Brachylophosaurini, the subadult morphology of the stratigraphically younger taxon matches the adult condition of the stratigraphically older taxon, illustrating a peramorphic trend of immature animals of a descendant taxon resembling adults of the ancestral taxon [60]. The palatine process of the jugal in subadult Probrachylophosaurus resembles the condition of adult Acristavus. The nasal crest in Brachylophosaurus increases in size late in ontogeny: subadults lack any crest, similar to the adult form of their proposed ancestor Acristavus; small adults have a small crest reminiscent of their proposed ancestor Probrachylophosaurus; and large adults have a large broad paddle-shaped crest. The nasofrontal suture of small subadult Brachylophosaurus is similar to that of adult Probrachylophosaurus, although Probrachylophosaurus has the deep rugosities of a more mature suture. The prequadratic process of the squamosal of small subadult Brachylophosaurus is also more similar to that of adult Probrachylophosaurus than to adult Brachylophosaurus.

Probrachylophosaurus bergei shares many morphologic similarities with Brachylophosaurus canadensis, but in other characters is more similar to Acristavus gagslarsoni. Thus, placing P. bergei as merely a new species of either genus would be problematic. Depending on the cladistic matrix used, P. bergei may be the sister taxon to B. canadensis and could be classified as a member of the same genus (Fig 23), or Maiasaura peeblesorum may be the sister taxon to B. canadensis (Fig 22), requiring P. bergei to be classified as a separate genus. Given this phylogenetic uncertainty, Probrachylophosaurus bergei should be considered a unique genus. Future discoveries of additional intermediate specimens will hopefully clarify evolutionary relationships within the Brachylophosaurini clade.

Conclusions

In the early years of dinosaur paleontology, specimens were collected as isolated points, each so morphologically unique that their evolutionary relationships were difficult to determine. As more fossil specimens are collected, the gaps in morphology that previously separated species are being filled. With larger sample sizes resulting in more continuous series of fossils with good stratigraphic resolution, variations in morphology can be analyzed in a more complete context, and attributed to ontogeny, evolution, taphonomic alteration, biogeography, or individual variation [70]. A better understanding of stratigraphy and advancements in radiometric dating enable precise temporal correlation of geographically separated localities. Taxa can then be placed in temporal sequence, allowing tests of evolutionary hypotheses.

A precise stratigraphic framework is critical for determining whether morphological variations of adult specimens are due to evolution or are variations within a roughly contemporaneous population. If closely related taxa do not overlap stratigraphically, the pattern is more parsimonious with anagenesis than cladogenesis. Recent research has greatly increased the sample size and stratigraphic resolution of specimens from the Judith River and Hell Creek Formations of Montana and their Canadian equivalents, revealing several potential anagenetic lineages in Campanian and Maastrichtian ornithischians [7, 45, 7173].

Because Probrachylophosaurus bergei is stratigraphically older than all Brachylophosaurus canadensis specimens, it is hypothesized to represent a basal brachylophosaur morphology, early in the evolution of this lineage from a non-crested ancestor. Thus, the small crest of Probrachylophosaurus would represent a transitional nasal morphology between a non-crested ancestor such as Acristavus and the larger crests of adult Brachylophosaurus. The fourth member of Brachylophosaurini, Maiasaura, would represent a cladogenic event, diverging from the lineage that led to Brachylophosaurus at a currently unknown point.

Supporting Information

S1 Fig. Ray teeth from Oldman Formation equivalent localities in the Judith River Formation of Montana.

Upper half of figure (A-D): two Myledaphus bipartitus teeth in occlusal view (A, C) and side view (B, D) with worn occlusal surface of the crowns from the MOR 1071 (JR-224) Brachylophosaurus canadensis bonebed in Malta, Montana, at a horizon equivalent to Unit 2 (Comrey Sandstone Zone) of the Oldman Formation. Lower half of figure (E-J): three teeth tentatively attributed to Pseudomyledaphus sp. from the upper muddy zone of Kennedy Coulee, Montana, equivalent to Unit 1 of the Oldman Formation. (E-F) tooth with unworn occlusal surface of crown; (G-H) tooth with worn occlusal surface of crown; (I-J) tooth with extremely worn occlusal surface of crown. Dashed lines indicate partially broken crown.

https://doi.org/10.1371/journal.pone.0141304.s001

(TIF)

S2 Fig. Phylogeny of hadrosaurines based on Prieto-Márquez [29].

Strict consensus of two most parsimonious trees resulting from adding Probrachylophosaurus bergei to Prieto-Márquez’s [29] matrix with minor character recodings as discussed in text, but no excluded characters. Values on branches represent bootstrap support; branches without values had less than 50% support. Tree statistics: shortest tree length = 627, Consistency Index = 0.72, Retention Index = 0.68, Rescaled Consistency Index = 0.49. The clade of Probrachylophosaurus, Brachylophosaurus, and Maiasaura with the exclusion of Acristavus had 55% bootstrap support.

https://doi.org/10.1371/journal.pone.0141304.s002

(TIF)

S1 File. Character matrix based on Prieto-Márquez [29] with all characters included, in nexus format.

Change file extension from.txt. to.nex for use in PAUP.

https://doi.org/10.1371/journal.pone.0141304.s003

(TXT)

S2 File. Character matrix based on Prieto-Márquez [29] with some characters excluded, in nexus format.

Change file extension from.txt. to.nex for use in PAUP.

https://doi.org/10.1371/journal.pone.0141304.s004

(TXT)

S3 File. Character matrix based on Gates et al. [3], in nexus format.

Change file extension from.txt. to.nex for use in PAUP.

https://doi.org/10.1371/journal.pone.0141304.s005

(TXT)

Acknowledgments

Many thanks to Mark Goodwin, Dave Varricchio, Don Brinkman, Matt Lavin, Denver Fowler, Ray Rogers, Dave Evans, Michael Ryan, Terry Gates, and Nic Campione for morphologic, stratigraphic, and cladistic advice and discussions. For specimen collection, thanks to the 2007–2008 MOR field crews, especially Brian Baziak, Holly Woodward, and Cary Woodruff, and 1981 and 1994 UCMP field crews, especially Mark Goodwin and Kyoko Kishi. For fieldwork support, hospitality, and land access, great thanks as always to Dan and Lila Redding. For land access and specimen donation, and for suggesting the species name, grateful thanks to Nolan and Cheryl Fladstol and John and Claire Wendland. Thanks to all members of the Rudyard, Montana community, whose continuing support of local paleontology makes this work possible. Excellent preparation was done by Carrie Ancell, Jamie Jette, Aleen Kienholz, Patsy Hookey, and volunteers at the MOR Bowman Prep Lab. For histological assistance, thanks to Ellen Lamm, Holly Woodward, Brian Baziak, and Christian Heck. For specimen transport, thanks to Robert and Sarah Boessenecker and Daniel Traub. Thanks to Kevin Seymour and David Evans (ROM); Don Brinkman, Brandon Strillsky, and Graeme Housego (TMP); Pat Holroyd, Mark Goodwin, and Kevin Padian (UCMP); Sue Frary (GPDM); and Sharon Emond (Phillips County Museum) for comparative specimen access. Dave Varricchio, Don Brinkman, and Matt Lavin provided helpful comments on drafts of this paper. Terry Gates and an anonymous reviewer offered additional comments that improved the quality of this paper.

Author Contributions

Conceived and designed the experiments: EAFF JRH. Performed the experiments: EAFF. Analyzed the data: EAFF. Contributed reagents/materials/analysis tools: JRH. Wrote the paper: EAFF.

References

  1. 1. Prieto-Márquez A (2005) New information on the cranium of Brachylophosaurus canadensis (Dinosauria, Hadrosauridae), with a revision of its phylogenetic position. Journal of Vertebrate Paleontology 25: 144–156.
  2. 2. Varricchio DJ, Horner JR (1993) Hadrosaurid and lambeosaurid bonebeds from the Upper Cretaceous Two Medicine Formation of Montana: taphonomic and biologic implications. Canadian Journal of Earth Sciences 30: 997–1006.
  3. 3. Gates TA, Horner JR, Hanna RR, Nelson RC (2011) New unadorned hadrosaurine hadrosaurid (Dinosauria, Ornithopoda) from the Campanian of North America. Journal of Vertebrate Paleontology 31: 798–811.
  4. 4. Horner JR (1984) Three ecologically distinct vertebrate faunal communities from the Late Cretaceous Two Medicine Formation of Montana, with discussion of evolutionary pressures induced by interior seaway fluctuations. In: McBane J. D. and Garrison P. B., editors. Montana Geological Society Field Conference and Symposium. Northwest Montana and Adjacent Canada. pp. 299–303.
  5. 5. Horner JR, Makela R (1979) Nest of juveniles provides evidence of family structure among dinosaurs. Nature 282: 296–298.
  6. 6. Horner JR (1983) Cranial osteology and morphology of the type specimen of Maiasaura peeblesorum (Ornithischia: Hadrosauridae), with discussion of its phylogenetic position. Journal of Vertebrate Paleontology 3: 29–38.
  7. 7. Ryan MJ, Evans DC (2005) Ornithischian Dinosaurs. Dinosaur Provincial Park: A Spectacular Ancient Ecosystem Revealed: 312–348.
  8. 8. LaRock JW (2001) Sedimentology and taphonomy of a dinosaur bonebed from the Upper Cretaceous (Campanian) Judith River Formation of north central Montana. MS Thesis, Department of Earth Sciences. Bozeman: Montana State University. pp. 61.
  9. 9. Horner JR (1988) A new hadrosaur (Reptilia, Ornithischia) from the Upper Cretaceous Judith River Formation of Montana. Journal of Vertebrate Paleontology 8: 314–321.
  10. 10. Renne PR, Mundil R, Balco G, Min K, Ludwig K (2010) Joint determination of 40K decay constants and 40Ar*/40K for the Fish Canyon sanidine standard, and improved accuracy for 40Ar/39Ar geochronology. Geochimica et Cosmochimica Acta 74: 5349–5367.
  11. 11. Goodwin MB, Deino AL (1989) The first radiometric ages from the Judith River Formation (Upper Cretaceous), Hill County, Montana. Canadian Journal of Earth Sciences 26: 1384–1391.
  12. 12. Eberth DA, Hamblin AP (1993) Tectonic, stratigraphic, and sedimentologic significance of a regional discontinuity in the upper Judith River Group (Belly River wedge) of southern Alberta, Saskatchewan, and northern Montana. Canadian Journal of Earth Sciences 30: 174–200.
  13. 13. Eberth DA (2005) The Geology. In: Currie P. J. and Koppelhus E. B., editors. Dinosaur Provincial Park: A Spectacular Ancient Ecosystem Revealed. Bloomington, Indiana: Indiana University Press. pp. 54–82.
  14. 14. Varricchio DJ, Koeberl C, Raven RF, Wolbach WS, Elsik WC, Miggins DP (2010) Tracing the Manson impact event across the Western Interior Cretaceous Seaway. Geological Society of America Special Paper 465: 269–299.
  15. 15. Rogers RR, Swisher CC, Horner JR (1993) 40Ar/39Ar age and correlation of the nonmarine Two Medicine Formation (Upper Cretaceous), northwestern Montana, USA. Canadian Journal of Earth Sciences 30: 1066–1075.
  16. 16. Ryan MJ, Russell AP, Hartman S (2010) A new chasmosaurine ceratopsid from the Judith River Formation, Montana. New Perspectives on Horned Dinosaurs: 181–188.
  17. 17. Jinnah ZA, Roberts EM, Deino AL, Larsen JS, Link PK, Fanning CM (2009) New 40Ar-39Ar and detrital zircon U-Pb ages for the Upper Cretaceous Wahweap and Kaiparowits formations on the Kaiparowits Plateau, Utah: implications for regional correlation, provenance, and biostratigraphy. Cretaceous Research 30: 287–299.
  18. 18. Renne PR, Swisher CC, Deino AL, Karner DB, Owens TL, DePaolo DJ (1998) Intercalibration of standards, absolute ages and uncertainties in 40Ar/ 39Ar dating. Chemical Geology 145: 117–152.
  19. 19. Thomas RG, Eberth DA, Deino AL, Robinson D (1990) Composition, radioisotopic ages, and potential significance of an altered volcanic ash (bentonite) from the Upper Cretaceous Judith River Formation, Dinosaur Provincial Park, southern Alberta, Canada. Cretaceous Research 11: 125–162.
  20. 20. Kirkland JI, Eaton JG, Brinkman DB (2013) Elasmobranchs from Upper Cretaceous freshwater facies in Southern Utah. In: Titus A. L. and Loewen M. A., editors. At the Top of the Grand Staircase: the Late Cretaceous of southern Utah. Bloomington, Indiana: Indiana University Press. pp. 153–194.
  21. 21. Brinkman DB, Russell AP, Eberth DA, Peng J (2004) Vertebrate palaeocommunities of the lower Judith River Group (Campanian) of southeastern Alberta, Canada, as interpreted from vertebrate microfossil assemblages. Palaeogeography, Palaeoclimatology, Palaeoecology 213: 295–313.
  22. 22. Peng J-H, Russell AP, Brinkman DB (2001) Vertebrate microsite assemblages (exclusive of mammals) from the Foremost and Oldman Formations of the Judith River Group (Campanian) of Southeastern Alberta: an illustrated guide. Provincial Museum of Alberta Natural History Occasional Paper 25: 1–54.
  23. 23. Cuthbertson RS, Holmes RB (2010) The first complete description of the holotype of Brachylophosaurus canadensis Sternberg, 1953 (Dinosauria: Hadrosauridae) with comments on intraspecific variation. Zoological Journal of the Linnean Society 159: 373–397.
  24. 24. Eberth DA, Evans DC (2011) Geology and Paleontology of Dinosaur Provincial Park, Alberta Field Trip Guidebook. International Hadrosaur Symposium. Drumheller, Alberta: Royal Tyrrell Museum. pp. 54.
  25. 25. Prieto-Márquez A (2007) Postcranial Osteology of the Hadrosaurid Dinosaur Brachylophosaurus canadensis from the Late Cretaceous of Montana. In: Carpenter K., editor editors. Horns and Beaks: Ceratopsian and Ornithopod Dinosaurs. Bloomington, IN: Indiana Press. pp. 91–115.
  26. 26. Evans DC (2010) Cranial anatomy and systematics of Hypacrosaurus altispinus, and a comparative analysis of skull growth in lambeosaurine hadrosaurids (Dinosauria: Ornithischia). Zoological Journal of the Linnean Society 159: 398–434.
  27. 27. Leiggi P, Schaff CR, May P (1994) Macrovertebrate collecting. In: Leiggi P. and May P., editors. Vertebrate Paleontological Techniques. Cambridge, UK: Cambridge University Press. pp. 59–77.
  28. 28. Horner JR, Weishampel DB, Forster CA (2004) Hadrosauridae. In: Weishampel D. B., Dodson P. and Osmólska H., editors. The Dinosauria. Berkeley: University of California Press. pp. 438–463.
  29. 29. Prieto-Márquez A (2010) Global phylogeny of Hadrosauridae (Dinosauria: Ornithopoda) using parsimony and Bayesian methods. Zoological Journal of the Linnean Society 159: 435–502.
  30. 30. Swofford DL (2002) PAUP*. Phylogenetic analysis using parsimony (*and other methods). Sunderland, MA: Sinauer Associates, http://paup.csit.fsu.edu/.
  31. 31. Lamm E-T (2013) Preparation and sectioning of specimens. In: Padian K. and Lamm E.-T., editors. Bone Histology of Fossil Tetrapods. Berkeley: University of California Press. pp. 55–160.
  32. 32. Rasband WS (1997–2014) ImageJ. U S National Institutes of Health, Bethesda, Maryland, USA, http://imagejnihgov/ij/.
  33. 33. Sternberg CM (1953) A new hadrosaur from the Oldman Formation of Alberta: discussion of nomenclature. National Museum of Canada, Bulletin 128: 275–286.
  34. 34. Lambe LM (1914) On Gryposaurus notabilis, a new genus and species of trachodont dinosaur from the Belly River Formation of Alberta, with a description of the skull of Chasmosaurus belli. The Ottawa Naturalist 27: 145–155.
  35. 35. Horner JR (1992) Cranial morphology of Prosaurolophus (Ornithischia: Hadrosauridae) with descriptions of two new hadrosaurid species and an evaluation of hadrosaurid phylogenetic relationships. Museum of the Rockies Occasional Paper 2: 1–119.
  36. 36. Trexler DL (1995) A detailed description of newly-discovered remains of Maiasaura peeblesorum (Reptilia: Ornithischia) and a revised diagnosis of the genus. MS Thesis Department of Biological Sciences. Calgary, Alberta: University of Calgary. pp. 235.
  37. 37. Horner JR, Currie PJ (1994) Embryonic and neonatal morphology and ontogeny of a new species of Hypacrosaurus (Ornithischia, Lambeosauridae) from Montana and Alberta. Dinosaur Eggs and Babies: 312–336.
  38. 38. Langston W Jr (1960) The vertebrate fauna of the Selma Formation of Alabama, part VI: the dinosaurs. Fieldiana: Geology Memoirs 3: 314–363.
  39. 39. Gallagher WB, Sugarman PJ, Feigenson MD (1996) Strontium isotope age estimates for east coast dinosaur sites. Journal of Vertebrate Paleontology 16: 36A.
  40. 40. Xing H, Prieto-Márquez A, Gu W, Yu T-X (2012) Re-evaluation and phylogenetic analysis of Wulagasaurus dongi, a hadrosaurine dinosaur from the Maastrichtian of northeast China. Vertebrata PalAsiatica 50: 160–169.
  41. 41. Prieto-Márquez A, Salinas GC (2010) A re-evaluation of Secernosaurus koerneri and Kritosaurus australis (Dinosauria, Hadrosauridae) from the Late Cretaceous of Argentina. Journal of Vertebrate Paleontology 30: 813–837.
  42. 42. Prieto-Márquez A (2014) Skeletal morphology of Kritosaurus navajovius (Dinosauria: Hadrosauridae) from the Late Cretaceous of the North American south-west, with an evaluation of the phylogenetic systematics and biogeography of Kritosaurini. Journal of Systematic Palaeontology 12: 133–175.
  43. 43. Gates TA, Sampson SD (2007) A new species of Gryposaurus (Dinosauria: Hadrosauridae) from the late Campanian Kaiparowits Formation, southern Utah, USA. Zoological Journal of the Linnean Society 151: 351–376.
  44. 44. Roberts EM, Deino AL, Chan MA (2005) 40Ar/39Ar age of the Kaiparowits Formation, southern Utah, and correlation of contemporaneous Campanian strata and vertebrate faunas along the margin of the Western Interior Basin. Cretaceous Research 26: 307–318.
  45. 45. Campione NE, Evans DC (2011) Cranial growth and variation in edmontosaurs (Dinosauria: Hadrosauridae): implications for latest Cretaceous megaherbivore diversity in North America. PLoS ONE 6: e25186. pmid:21969872
  46. 46. McGarrity CT, Campione NE, Evans DC (2013) Cranial anatomy and variation in Prosaurolophus maximus (Dinosauria: Hadrosauridae). Zoological Journal of the Linnean Society 167: 531–568.
  47. 47. Bell PR (2011) Redescription of the skull of Saurolophus osborni Brown 1912 (Ornithischia: Hadrosauridae). Cretaceous Research 32: 30–44.
  48. 48. Bell PR (2011) Cranial osteology and ontogeny of Saurolophus angustirostris from the Late Cretaceous of Mongolia with comments on Saurolophus osborni from Canada. Acta Palaeontologica Polonica 56: 703–722.
  49. 49. Prieto-Márquez A (2011) Cranial and appendicular ontogeny of Bactrosaurus johnsoni, a hadrosauroid dinosaur from the Late Cretaceous of northern China. Palaeontology 54: 773–792.
  50. 50. Sues H-D, Averianov A (2009) A new basal hadrosauroid dinosaur from the Late Cretaceous of Uzbekistan and the early radiation of duck-billed dinosaurs. Proceedings of the Royal Society B 276: 2549–2555. pmid:19386651
  51. 51. Van Itterbeeck J, Horne DJ, Bultynck P, Vandenberghe N (2005) Stratigraphy and palaeoenvironment of the dinosaur-bearing Upper Cretaceous Iren Dabasu Formation, Inner Mongolia, People's Republic of China. Cretaceous Research 26: 699–725.
  52. 52. Köhler M, Marin-Moratalla N, Jordana X, Aanes R (2012) Seasonal bone growth and physiology in endotherms shed light on dinosaur physiology. Nature 487: 358–361. pmid:22763443
  53. 53. Woodward HN, Freedman Fowler EA, Farlow JO, Horner JR (2015) Maiasaura, a model organism for extinct vertebrate population biology: a statistically robust assessment of growth dynamics and survivorship. Paleobiology: available on CJO2015.
  54. 54. Dilkes DW (1993) Growth and locomotion in the hadrosaurian dinosaur Maiasaura peeblesorum from the Upper Cretaceous of Montana. PhD Dissertation, Department of Zoology. University of Toronto. pp. 447.
  55. 55. Dilkes DW (2000) Appendicular myology of the hadrosaurian dinosaur Maiasaura peeblesorum from the Late Cretaceous (Campanian) of Montana. T Roy Soc Edin-Earth 90: 87–125.
  56. 56. Hübner TR (2012) Bone Histology in Dysalotosaurus lettowvorbecki (Ornithischia: Iguanodontia)—Variation, Growth, and Implications. PLoS ONE 7: e29958. pmid:22238683
  57. 57. Horner JR, de Ricqlès A, Padian K, Scheetz RD (2009) Comparative long bone histology and growth of the "hypsilophodontid" dinosaurs Orodromeus makelai, Dryosaurus altus, and Tenontosaurus tillettii (Ornithischia: Euornithopoda). Journal of Vertebrate Paleontology 29: 734–747.
  58. 58. Haeckel E (1901) The Riddle of the Universe at the Close of the Nineteenth Century. New York: Harper & Brothers. 391 p.
  59. 59. Haeckel E (1866) Generelle morphologie der organismen. Allgemeine grundzüge der organischen formen-wissenschaft, mechanisch begründet durch die von Charles Darwin reformirte descendenz-theorie. Berlin: Georg Reimer. 462 p.
  60. 60. Rozhdestvensky AK (1965) Growth changes in Asian dinosaurs and some problems of their taxonomy. Paleontologischeskii Zhurnal 3: 95–109.
  61. 61. Tsuihiji T, Watabe K, Tsogtbaatar K, Tsubamoto T, Barsbold R, Suzuki S, et al. (2011) Cranial osteology of a juvenile specimen of Tarbosaurus bataar from the Nemegt Formation (Upper Cretaceous) of Bugin Tsav, Mongolia. Journal of Vertebrate Paleontology 31: 497–517.
  62. 62. Campione NE, Brink KS, Freedman EA, McGarrity CT, Evans DC (2012) ‘Glishades ericksoni’, an indeterminate juvenile hadrosaurid from the Two Medicine Formation of Montana: implications for hadrosauroid diversity in the latest Cretaceous (Campanian-Maastrichtian) of western North America. Palaeobiodiversity and Palaeoenvironments August 24: 1–11.
  63. 63. Horner JR (1989) The ontogenetic predictability of hadrosaur crania. Journal of Vertebrate Paleontology 9: 25A.
  64. 64. Prieto-Márquez A (2010) The braincase and skull roof of Gryposaurus notabilis (Dinosauria, Hadrosauridae), with a taxonomic revision of the genus. Journal of Vertebrate Paleontology 30: 838–854.
  65. 65. Horner JR, de Ricqlès A, Padian K (2000) Long bone histology of the hadrosaurid dinosaur Maiasaura peeblesorum: growth dynamics and physiology based on an ontogenetic series of skeletal elements. Journal of Vertebrate Paleontology 20: 115–129.
  66. 66. Dodson P (1975) Taxonomic implications of relative growth in lambeosaurine hadrosaurs. Systematic Zoology 24: 37–54.
  67. 67. Schott R, Evans DC, Goodwin MB, Brown CM, Longrich N (2010) Cranial ontogeny in Stegoceras and the evolution of cranial doming and ornamentation in Pachycephalosauria (Dinosauria: Ornithischia). Journal of Vertebrate Paleontology, SVP Program and Abstracts Book: 159A.
  68. 68. Horner JR, Goodwin MB (2009) Extreme cranial ontogeny in the Upper Cretaceous dinosaur Pachycephalosaurus. PLoS ONE 4: e7626. pmid:19859556
  69. 69. Sampson SD, Ryan MJ, Tanke DH (1997) Craniofacial ontogeny in centrosaurine dinosaurs (Ornithischia: Ceratopsidae): taxonomic and behavioral implications. Zoological Journal of the Linnean Society 121: 293–337.
  70. 70. Horner JR, Goodwin MB, Myhrvold N (2011) Dinosaur census reveals abundant Tyrannosaurus and rare ontogenetic stages in the Upper Cretaceous Hell Creek Formation (Maastrichtian), Montana, USA. PLoS ONE 6: 1–9. e16574.
  71. 71. Evans DC, Reisz RR (2007) Anatomy and relationships of Lambeosaurus magnicristatus, a crested hadrosaurid dinosaur (Ornithischia) from the Dinosaur Park Formation, Alberta. Journal of Vertebrate Paleontology 27: 373–393.
  72. 72. Ryan MJ, Holmes RB, Russell AP (2007) A revision of the late Campanian centrosaurine ceratopsid genus Styracosaurus from the Western Interior of North America. Journal of Vertebrate Paleontology 27: 944–962.
  73. 73. Scannella JB, Fowler DW, Goodwin MB, Horner JR (2014) Evolutionary trends in Triceratops from the Hell Creek Formation, Montana. Proceedings of the National Academy of Sciences 111: 10245–10250.