Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Complexity of the International Agro-Food Trade Network and Its Impact on Food Safety

  • Mária Ercsey-Ravasz,

    Affiliations Interdisciplinary Center for Network Science and Applications (iCeNSA) and Department Physics, University of Notre Dame, Notre Dame, Indiana, United States of America, Faculty of Physics, Babes-Bolyai University, RO-400084 Cluj-Napoca, Romania

  • Zoltán Toroczkai,

    Affiliation Interdisciplinary Center for Network Science and Applications (iCeNSA) and Department Physics, University of Notre Dame, Notre Dame, Indiana, United States of America

  • Zoltán Lakner,

    Affiliation Department of Food Sciences, Budapest Corvinus University, Budapest, Hungary

  • József Baranyi

    jozsef.baranyi@ifr.ac.uk

    Affiliation Institute of Food Research, Norwich Research Park, Norwich, United Kingdom

Correction

30 Oct 2012: Ercsey-Ravasz M, Toroczkai Z, Lakner Z, Baranyi J (2012) Correction: Complexity of the International Agro-Food Trade Network and Its Impact on Food Safety. PLOS ONE 7(10): 10.1371/annotation/5fe23e20-573f-48d7-b284-4fa0106b8c42. https://doi.org/10.1371/annotation/5fe23e20-573f-48d7-b284-4fa0106b8c42 View correction

Abstract

With the world’s population now in excess of 7 billion, it is vital to ensure the chemical and microbiological safety of our food, while maintaining the sustainability of its production, distribution and trade. Using UN databases, here we show that the international agro-food trade network (IFTN), with nodes and edges representing countries and import-export fluxes, respectively, has evolved into a highly heterogeneous, complex supply-chain network. Seven countries form the core of the IFTN, with high values of betweenness centrality and each trading with over 77% of all the countries in the world. Graph theoretical analysis and a dynamic food flux model show that the IFTN provides a vehicle suitable for the fast distribution of potential contaminants but unsuitable for tracing their origin. In particular, we show that high values of node betweenness and vulnerability correlate well with recorded large food poisoning outbreaks.

Introduction

By 2030, food demand is expected to increase by 50% [1] and thus the global food supply is playing an increasingly critical role in the economical and political landscape [2], [3]. The latest deadly food poisoning outbreaks in 2011 (Escherichia coli in Germany [4], Listeria monocytogenes in the US [5]) and their economic, political and social effects clearly illustrated the importance of prompt tracing of the origin of specific food ingredients. This task is placing a huge pressure on regulation and surveillance.

Since the 1960-s, global food transport has been increasing at an exponential rate, faster than food production itself, as illustrated in Fig. 1, which was generated using ComTrade [6], an agro-food import-export database of the United Nations (UN). The picture becomes even more complex if we factor in the growing number of countries relying on international food trade and, additionally, the fact that the traded food types have been increasingly moving from agricultural raw materials and staples towards processed and branded products. As a consequence, food fluxes between countries form a complex, dynamic web of interactions referred here as the International Agro-Food Trade Network (IFTN). For several countries, this web ensures access to any food item regardless of season and location. However, it may also present serious vulnerabilities [7], [8], [9]. As we show here, the IFTN has become a densely interwoven complex network [10], [11], [12], [13], creating a perfect platform to spread potential contaminants with practically untraceable origins.

thumbnail
Figure 1. The world’s food trade grows faster than the food production.

(A) (Log-linear scale). The world’s food production (thin red line), measured in current Billion US$, doubles in ca. 30 years, while the amount of food transported on the IFTN (linearly fitted small squares, blue) increases by ca. 10-fold in the same time. (B) (Linear scale). Food ingredients flow at an increasing rate from countries to countries, as shown by the exponentially increasing [world export]/[world production] ratio calculated from the above data (small squares fitted by an exponential curve). Note that this ratio is unaffected by the US$ inflation rate. Data obtained from UN databases [6], [23].

https://doi.org/10.1371/journal.pone.0037810.g001

Using the ComTrade database [6], we constructed the IFTN and analyzed its structure and dynamics during the last ten years. Fig. 2, based on the 1998 data, shows a typical picture of the IFTN. The nodes of the network represent the countries, while the directed and weighted edges indicate the food trade fluxes between the countries. The magnitude of a flux (edge weight) represents the total value of the annual agro-food trade expressed in current US dollars (US$) from one country to the other. The size of a node is drawn proportional to the total import-export value of the country, while the thickness of an edge is proportional to the log-value of the food-flux it represents. Colors indicate the betweenness-centrality values of the nodes and edges as detailed in the caption of the figure and in the Materials and Methods section.

Results

General Trends and Structure of the IFTN

The total amount of food-flux in the IFTN grew from 438Billion (B) US$ in 1998 to 1060B US$ in 2008; a 2.3-fold increase, while the total food production grew only 1.4-fold in the same period (from 1,400B US$ to 1,780B US$). The density of the IFTN increased from 25% in 1998 to 33% in 2008 (see the Materials and Methods). Unlike homogeneous random graphs, the IFTN has a broad degree distribution, indicating a heterogeneous network structure [10], [11]. The distribution of fluxes (number of edges with flux values within a given range) can be approximated by a lognormal distribution (Fig. 3A), implying that this distribution is also broad, with a fat tail.

thumbnail
Figure 2. The complete International Agro-Food Trade Network in 1998.

The IFTN is based on reported export, involving N = 207 countries (nodes) drawn as disks and M = 10645 trade fluxes (those worth more than 1 million US$), drawn as directed edges/links. The top 44 countries with the largest total trade activity (import+export) and the top 300 largest food-trade fluxes were colored according to their betweenness values (see Materials and Methods). The rest of the countries and edges are drawn with gray. The sizes of the colored disks are proportional to the logarithm of their total trade activity, ln(Ei+Ii). The thickness of the directed links is proportional to the log value of the trade flux in that direction, ln(Φij). The structure of the IFTN was similar throughout 1998–2008.

https://doi.org/10.1371/journal.pone.0037810.g002

A frequently used measure in the structural analysis of complex networks is the node- or edge-betweenness centrality (see [11], [14], [15] and also Materials and Methods). It quantifies how “central” is the position of the node/edge in the network, in the sense that high centrality nodes/edges collect large portions of the traffic through the network. For this reason, they also present the Achilles’ heel of a network as changes in the status of these nodes and edges will have the largest effect on the whole system [16], [17], both in connectivity and transport properties. Nodes with top centrality values play a critical role in the IFTN because any food-born substance (e.g. chemical or microbiological contamination) will spread most efficiently through them into the rest of the network, while tracing the source of such a substance is difficult due to the large number of network paths running through these nodes. Fast spread is also facilitated by the small value of the average shortest path (measured in hop-counts) of the IFTN, which is L = 1.52. That is, on average, one can reach any node in less than 2 hops from any other node along shortest trade routes. Though a single, specific food ingredient may not necessarily follow the shortest paths in the IFTN (e.g., it could be included into more complex foods and sent on various routes), the small value of the average shortest path length is still an indicator of the close proximity of almost all the nodes, guaranteeing fast spread on the network.

thumbnail
Figure 3. Structural properties of the IFTN.

(A) Histogram of fluxes (blue bars) fitted by a lognormal distribution (solid continuous line). The parameters of the fitted distribution for lnΦ are μ = 7.68 (mean) and σ = 3.42 (standard deviation). The flux Φ is expressed in thousand US$ units. (B) Histogram of the betweenness centrality values of nodes and (C) edges. (D) A scatter-plot of degree vs. betweenness for every country. The figures represent the 2007 dataset.

https://doi.org/10.1371/journal.pone.0037810.g003

Figs. 3B,C present histograms of betweenness values for nodes and edges, respectively. These distributions show that the network is dominated by a centrally positioned small set of countries (shown with their 3-letter codes on the figures) and their trade relationships. Interestingly, despite its relatively small size (compared to other high betweenness countries such as USA or Germany), The Netherlands, with trades totaling 50B US$ in imports and 79B US$ in exports in 2008, has assumed a top centrality position over the years.

Fig. 3D plots all countries by their degrees and the corresponding betweenness values. It shows that countries with high betweenness also tend to be network hubs in the IFTN, i.e. they tend to have the largest degrees. However, there are also high degree countries that do not have high betweenness centrality values (e.g. Belgium). Note the role of Russia as a “bridge”-node, with a relatively high centrality, but a lower degree. Fig. 3D also reveals a core group of 7 nodes (within the oval in the picture), each engaging in trade relations with at least 77% of all the world’s countries. When combined, they are responsible for 30% of the total trade flux. These 7 nodes present hotspots for the whole of the IFTN, as changes in their status would generate the largest global impacts.

Fig. 4 shows the backbone of the IFTN in 2007. The nodes are colored according to their betweenness centrality values, just as in Fig. 2, but here the node size is proportional to the logarithm of the total import+export value per capita in that country. Although USA has the largest betweenness value, the per-capita trade activity is largest for The Netherlands. Therefore, combining this with the fact that it has the 4-th largest betweenness, the food traders of The Netherlands have probably made their country into the most critical hub of the IFTN. Assuming that this overall picture of the network is sufficiently representative for food products that may act as suitable vectors for microbiological or chemical contaminations, the products that start from or go through The Netherlands would most efficiently affect the whole system.

thumbnail
Figure 4. The backbone of the IFTN based on the 2007 dataset.

The backbone is formed by the top 44 nodes (countries) with the largest total trade activity (import+export). Nodes and edges are both colored by their betweenness values; the thickness of the directed edges is proportional to the natural logarithm of the trade value in that direction, as in Fig. 2. The size of a node, in this figure, is proportional to the logarithm of the per capita trade activity, i.e. ln[(Ei+Ii)/Πi] where Πi is the population size of the country i. Countries are labeled by their 3-letter ISO 3166 codes.

https://doi.org/10.1371/journal.pone.0037810.g004

Spread and Tracing on the IFTN

The above observations made about vulnerabilities are based on graph-theoretical properties of the IFTN. Next, we develop a dynamic model, by tracking the food fluxes between the countries (Food Flux Model, or FFM), which will further underscore the potential of the IFTN to efficiently spread contaminants, and the poor outlook for their traceability. For brevity, in what follows, by “contaminated food” we mean a food item that contains some specific substance (such as chemical or microbiological contamination but it could also be common additives, or a subset of ingredients) to be followed or traced along the food trade pathways.

The total import (export) into (from) a country i can be written as: and respectively. Suppose that a country i produces an amount of Pi of a certain food, out of which Pi(in) is consumed there, while the rest Pi(out) is exported (Fig. 5), and thus Pi = Pi(in) +Pi(out). Let ri denote the fraction of the imported food, which is passed on to other countries (via resale, repackaging, or after processing it into more complex food items). We can estimate the ri fractions as follows. The fraction of imported and produced food that is locally consumed (obtainable from the FAOSTAT food balance sheets [18]) can be written as αi = (1–ri)Ii/Pi(in). If we assume that consumption is proportional to the size of the population of a country (at least for the highest trade activity countries shown in Fig. 4), we can write: (1–ri)Ii+Pi(in) = i, where c is the typical value (in US$) of food consumed by a person in a year in the country i with a population of Πi.

thumbnail
Figure 5. Schematics for the Food Flux Model.

Country i with population of Pi has a total yearly agro-food import Ii , out of which riIi is exported, and (1-ri)Ii is consumed locally. A specific food ingredient to be tracked is produced in this country in the value of Pi from which Pi(out) will be included into its total export Ei , while Pi(in) is consumed locally. The parameter c represents the average value (in US$) of the food consumed by a person in a year.

https://doi.org/10.1371/journal.pone.0037810.g005

We estimated the value of c, for the backbone of the IFTN, to be at around 104 US$. This value is fairly constant over the backbone-countries. The reason is that these countries are approximately on the same level of economic development, and there is a low degree of variance between the shares of foods. (The analysis can, of course, readily be repeated with country-specific c values). From the above two equations it follows that.

Suppose that a country s produces an amount of Ds from a specific food ingredient and passes it to its neighbors in the IFTN at rates proportional to the food-fluxes (Φsj) towards those neighbors. A fraction rj of that “contaminated” food, namely rjDsΦsj/Es is then exported towards the neighbor j, while the rest, (1–rj)DsΦsj/Es is consumed locally. The following recursion then describes the way food ingredients spread on the IFTN:(1)where n denotes the number of export steps, Di|s(n) the amount (in dollar value) of food containing the ingredient in question, arriving into country i on the n-th step (this also allows for re-appearance in the same country), given it started from country s, and the summation is over all the neighbors j of i in the IFTN. The amount of food consumed in country i that contain the tracked ingredient can be obtained from the recursion

(2)The initial conditions for (2) are given as Di|s(0) = 0 if i≠s and Ds|s(0) = βEs, where β represents the contaminated fraction of the export from country s. We chose for all i.

We simulated and recorded the contamination spread for n = 5 steps, from every one of the top 44 countries with the largest trade activity as shown in Fig. 4. After the simulations, we selected the top ten (s,t) source-target pairs with the largest contamination Dt|s(n) at the target country; see Table 1. Germany came out with the largest potential for contaminated food import with The Netherlands as the source of the contamination.

thumbnail
Table 1. Largest Dt|s(n) contamination values and the respective source-target pairs using the 2007 dataset in the Food Flux Model.

https://doi.org/10.1371/journal.pone.0037810.t001

Considering the above mechanism as a worst-case scenario, we may assess how a contamination starting from a source country s affects the global population. This can be quantified via , which we call the contamination impact. Fig. 6A shows the top 14 countries by their Rs(n) value, as function of export steps, n.

thumbnail
Figure 6. Spread analysis based on the Food Flux Model.

(A) Evolution of the contamination impact Rs(n) and (B) vulnerability Vi(n), for the top 14 countries as function of the export steps, n. (C) “Vulnerability vs. betweenness” scatter plot for the 44 countries with the largest trade activity. Countries with significant food poisoning cases in the last 15 years are indicated by encircled symbols. In particular: the 2011 Listeria outbreak in the USA, from produce, causing 29 deaths [5]; the 2011 E. coli outbreak in Germany, from red beet sprout, with 46 deaths and 4000 diagnosed cases [4]; the Salmonella outbreak in 2005 in The Netherlands with 165 diagnosed cases [24]; the 1996 E. coli outbreak in the UK with 512 confirmed cases, 17 deaths [25]; the 2008 Listeria outbreak in Canada with 57 diagnosed cases and 27 deaths [26]; the 1996 E. coli outbreak in Japan, from radish sprout, with 2 infant deaths and more than 5000 hospitalized [27].

https://doi.org/10.1371/journal.pone.0037810.g006

We can also define a vulnerability measure Vi(n) for a country i, as the average impact generated by other countries as if the contamination started from there, where the average is taken over all sources s. That is (Fig. 6B). As seen in Figs. 6A,B, the ranking for the countries with the highest impact and vulnerability values is practically independent of n, the number of export steps. As the diameter of the IFTN is small, contamination can spread very efficiently, and thus already modest values of n will start capturing the effects on the whole network.

The betweenness-based top lists in Figs. 3C,D correlate well with the top lists of Figs. 6B,C, which was obtained using the FFM. In particular, the USA, The Netherlands and Germany repeatedly emerge among the top hotspots for contamination impacts. Fig. 6C shows a scatter-plot of “vulnerability vs. betweenness” for the 44 countries studied. Encircled symbols show that high vulnerability and betweenness values (see Table 1) correlate well with recorded large food poisoning outbreaks.

Note that, although our predictions are based on coarse data, the developed models can be certainly refined once higher resolution data (food types, time-scales etc) becomes available.

Discussion

The World Trade Web (WTW) has been extensively analyzed by network methods, for example in [19] and [20]. Our aim was not to repeat it for a subset of the WTW, but to demonstrate that the trends shown in Fig. 1 cannot be sustained if both free trade and the demand for biotracing are to be met. During a food poisoning outbreak the first and most important task is to identify the origin of the contamination. Delays in this task can have severe consequences for the health of the population and incur social, political and economical damages with international repercussions. A case in point is the consequences of the three weeks delay in identifying the origin of the E. coli contamination in Germany in June 2011 [4].

Note that our study does not predict an increase in the number of food poisoning cases but that, when it happens, there will be inevitable delays in identifying the sources due to the increasingly interwoven nature of the IFTN. That is, even if food contamination was less frequent, for example due to better local control of production, its dispersion/spread is becoming more efficient. In particular, our study identifies critical spots in the network that may seriously hamper future biotracing efforts. Although the analysis presented here is based on coarse data representing aggregated food fluxes, it can also aid with biotracing, in a “Bayesian approach” sense by providing a list of most probable sources and pathways to be used as starting points.

Recently there have been calls for an interdisciplinary approach [7] to monitor, understand, and control food trade flows as it becomes an issue no longer affecting just single countries, but the global livelihood of the human population. Such an approach would facilitate a better understanding of the IFTN, especially if it is broken down into time-scales, food types and their interdependencies. This would: 1) contribute to protection against outbreaks and intentional attacks; 2) help devise better traceability methods and thus increase consumer confidence; 3) allow for a better distribution of food and thus reduction of wastage [21], estimated to be about 30 – 40% globally [2]; 4) increase the reliability and stability of supply systems; and 5) help decrease the environmental burden of food production and distribution logistics. Such an interdisciplinary approach is entirely within the means of the state-of-the art of science and technology, if supported by detailed and systematic data collection. The role of state and interstate organizations (e.g. EU, UN) is essential in this. Although much of the food commerce and trade happens through the private sector, information collection and sharing should be incentivized to generate the data needed for an in-depth knowledge of the structure and dynamics of the IFTN, to ensure the safety and security of the global food system.

Materials and Methods

Data Sources and Analysis

The data used for this study was obtained from the ComTrade web site of the UN [6]. The HS-02 classification system was used to select the product codes 01–24, in the query, as these are related to food. The records used in our study were those reporting the values of certain food categories imported/exported from one country to another, expressed in current US dollars (US$). Since the total (worldwide) import must equal the total export, these were also compared/checked and no significant differences were found. Our calculations are based on records when the reporting country was the exporter.

Betweenness Centrality (BC)

BC is a measure that rates the importance of the position of a node or an edge in the network with respect to transport through the whole network. While this is usually done with shortest paths on a graph, here we used a weighted betweenness definition that takes into account the fluxes through edges [22]. For betweenness calculations, the weight of a link is defined as its resistance to transport, and one searches for lowest total weight (resistance) paths from a node m to a node n within the network. The weight of the directed link (i,j) is defined as wij  = −ln (Φijmax), where is the largest flux in the network. Using this logarithmic form, the weights are all positive and additive along a path. If σmn(i) denotes the number of lowest total weight (LTW) paths from node m to node n that are passing through i, and σmn denotes the total number of LTW paths running from m to node n, the betweenness centrality of node i is defined as (a similar definition holds for an edge).

Graph Density

The density of a directed graph ρ is given by the ratio ρ = M/[N(N-1)], between the number of edges it has, M, and the number of edges it could possibly have, N(N-1), where N is the number of nodes. For 2007, we have N = 202 and M = 13534 giving a graph density of ρ = 0.33 (33%), meaning that the graph is not sparse, but rather interconnected.

Food Flux Model Parameters

Using the fluxes and population sizes directly from the 2007 data, we calculated the fraction αiΠi/(1i)Ii for each country. The ratios obtained were exponentially distributed, with values between 0 and 0.003 [person/US$]. For the backbone countries, they were typically small, less than 0.0002, due to the large fluxes assigned to these countries. The obtained fractions were used to calculate the values of ri = 1– [iΠi/(1+αi) Ii ], using a constant for the parameter c (per person food consumption in a country in a year, expressed in US$). In reality, it varies from country to country but here, as a first approach, we chose a single value representative for the backbone of the IFTN, which indeed, involves countries at similar levels of economic development. This did not affect the results significantly because the fluxes between countries that are not part of the backbone represent a negligible portion of all fluxes in the network. The ranking of countries based on their Ri and Vi values proved to be robust for a wide range of values for the parameter c (10< c <105 US$). For the simulation results shown we used c = 104 US$. On the other hand, the ranking of the countries proved to be highly sensitive to the distribution of the αiΠi/(1i)Ii fractions; for which, however, we used data from UN databases.

The second model parameter, β, was used to define initial conditions for the simulation. It represents the fraction of the exported food that is contaminated. The value of this parameter would depend on the actual contamination; however we use it as a simple multiplying factor which had no effect on the overall ranking. Here we chose β = 0.001. Had we chosen for example β = 0.01, the values in Table 1 would have been 10 times larger, but there would have been no other changes.

Acknowledgments

The authors wish to acknowledge the United Nations for making their databases publicly available. JB thanks Arie Havelaar (RIVM) and Alan Reilly (FSAI) for their personal communications. The authors are grateful to the referees and to Emily Smith (IFR) for their suggestions to improve the text.

Author Contributions

Conceived and designed the experiments: MER JB ZT. Performed the experiments: MER. Analyzed the data: MER JB ZT ZL. Contributed reagents/materials/analysis tools: ZL MER. Wrote the paper: ZT JB.

References

  1. 1. Woods J, Williams A, Hughes JK, Black M, Murphy R (2010) Energy and the food system. Philosophical Transactions of the Royal Society - Biological Sciences 365: 2991–3006.
  2. 2. Godfray HCJ, Beddington JR, Crute IR, Haddad L, Lawrence D, et al. (2010) Food Security: The Challenge of Feeding 9 Billion People. Science 327: 812–818.
  3. 3. Beddington JR (2010) Global food and farming futures. Philosophical Transactions of the Royal Society - Biological Sciences 265: 2767.
  4. 4. Kupferschmidt K (2011) Scientists rush to study genome of lethal E. coli. Science 332: 1249–1250.
  5. 5. Centers for Disease Control and Prevention Website (2011) Investigation Update: Multistate Outbreak of Listeriosis Linked to Whole Cantaloupes from Jensen Farms, Colorado. 30: Available: http://www.cdc.gov/listeria/outbreaks/cantaloupes-jensen-farms/index.html. Accessed: 2011 Nov.
  6. 6. ComTrade Website. 30: Available: http://comtrade.un.org/db/. Accessed 2011 Nov.
  7. 7. Wilkinson K, Grant WP, Green LE, Hunter S, Jeger MJ, et al. (2011) Infectious diseases of animals and plants: an interdisciplinary approach. Philosophical Transactions of the Royal Society - Biological Sciences 366: 1933–1942.
  8. 8. Dilley M, Boudreau TE (2001) Coming to terms with vulnerability: a critique of the food security definition. Food Policy 26: 229–247.
  9. 9. Gilmore R (2004) US food safety under siege. Nature Biotechnology 22: 1503–1505.
  10. 10. Albert R, Barabási AL (2002) Statistical mechanics of complex networks. Reviews of Modern Physics 74: 47–98.
  11. 11. Newman MEJ (2010) Networks: an Introduction. Oxford University Press.
  12. 12. Serrano MA, Boguñá M (2003) Topology of the World Trade Web. Physical Review E 68: 0015101(R).
  13. 13. Baskaran T, Blochl F, Bruck T (2011) The Heckscher–Ohlin model and the network structure of international trade. International Review of Economics and Finance 20: 135–145.
  14. 14. Brandes U (2008) On variants of shortest-path betweenness centrality and their generic computation. Social Networks 30: 136–145.
  15. 15. Newman MEJ (2001) Scientific collaboration networks. II. Shortest paths, weighted networks, and centrality. Physical Review E 67: 016132.
  16. 16. Holme P, Kim BJ, Yoon CN, Han SK (2002) Attack vulnerability of complex networks. Physical Review E 65: 056109.
  17. 17. Dall’Asta L, Barrat A, Barthélemy M, Vespignani A (2006) Vulnerability of weighted networks. Journal of Statistical Mechanics - Theory and Experiment 3: 04006.
  18. 18. FAOSTAT - Food Balance Sheet Website of the Food and Agriculture Organization of the United Nations. 30: Available: http://faostat.fao.org/site/368/default.aspx#ancor. Accessed 2011 Nov.
  19. 19. Hidalgo C, Hausmann R (2009) The building blocks of economic complexity. Proceedings of the National Academy of Sciences, USA. 106: 10570–10575.
  20. 20. Serrano MA, Boguñá M, Vespignani A (2007) Patterns of dominant flows in the world trade web. Journal of Economic Interaction and Coordination 2: 111–124.
  21. 21. Parfitt J, Barthe M, Sarah M (2010) Food waste within food supply chains: quantification and potential for change to 2050. Philosophical Transactions of the Royal Society - Biological Sciences 365: 3062–3081.
  22. 22. Ercsey-Ravasz M, Lichtenwalter R, Chawla NV, Toroczkai Z (2011) (2011) Range-limited centrality measures in non-weighted and weighted complex networks. http://arxiv.org/abs/1111.5382.
  23. 23. FAOSTAT Website. 30: Available: http://faostat.fao.org/site/535/default.aspx#ancor. Accessed: 2011 Nov.
  24. 24. Kivi M, van Pelt W (2005) Large outbreak of Salmonella Typhimurium DT104, The Netherlands, September–November 2005. Eurosurveillance 10: 2847.
  25. 25. Cowden JM, Ahmed S, Donaghy M, Riley A (2001) Epidemiological investigation of the central Scotland outbreak of Escherichia coli O157 infection, November to December 1996. Epidemiology and Infection 126: 335–341.
  26. 26. Ontario Public Health Division of the Ministry of Health and Long-term Care Website (2009) Chief Medical Officer of Health’s Report on the Management of the 2008 Listerosis Outbreak in Ontario. 30: Available:http://www.health.gov.on.ca/english/public/pub/disease/listeria/listeriosis_outbreak_rep.pdf. Accessed: 2011 Nov.
  27. 27. National Institute of Health and Infectious Diseases Control Division, Ministry of Health and Welfare Website (1997) Verocytotoxin-producing Escherichia coli (entero-hemorrhagic E. coli) infections, Japan, 1996 June. 30: Available: http://idsc.nih.go.jp/iasr/18/209/tpc209.html. Accessed: 2011 Nov.