Signalling network inference is a central problem in system biology. Previous studies investigate this problem by independently inferring local signalling networks and then linking them together via crosstalk. Since a cellular signalling system is in fact indivisible, this reductionistic approach may have an impact on the accuracy of the inference results. Preferably, a cell-scale signalling network should be inferred as a whole. However, the holistic approach suffers from three practical issues: scalability, measurement and overfitting. Here we make this approach feasible based on two key observations: 1) variations of concentrations are sparse due to separations of timescales; 2) several species can be measured together using cross-reactivity. We propose a method, CCELL, for cell-scale signalling network inference from time series generated by immunoprecipitation using Bayesian compressive sensing. A set of benchmark networks with varying numbers of time-variant species is used to demonstrate the effectiveness of our method. Instead of exhaustively measuring all individual species, high accuracy is achieved from relatively few measurements.
Citation: Nie L, Yang X, Adcock I, Xu Z, Guo Y (2014) Inferring Cell-Scale Signalling Networks via Compressive Sensing. PLoS ONE 9(4): e95326. https://doi.org/10.1371/journal.pone.0095326
Editor: Alberto de la Fuente, Leibniz-Institute for Farm Animal Biology (FBN), Germany
Received: November 26, 2013; Accepted: March 26, 2014; Published: April 18, 2014
Copyright: © 2014 Nie et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This research is partially supported by the Strategic Priority Program of Chinese Academy of Sciences (No. XDA06010400) and the Innovative R&D Team Support Program of Guangdong Province (No. 201001D0104726115). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Inferring signalling networks from time series aims at revealing the mechanisms behind biological processes and is an important research subject in systems biology. Many local signalling networks (e.g. –) have been inferred from the dynamic concentrations of proteins typically quantified by immunoprecipitation . Studies for inferring local signalling networks are based on the assumption that the target network is isolated from other networks in a cellular system. In most cells, at least one species in a local signalling network will have effects on other networks; that is known as crosstalk. For example, the glucocorticoid receptor (GR) pathway is vital for regulating anti-inflammatory and immunosuppressive processes. Post-translational modification of GR, a potential substrate for p38 mitogen-activated protein kinase (MAPK) pathway, affects nuclear retention of GR as well as transactivation. In some inflammatory diseases, such as severe asthma, the effect of GR as an anti-inflammatory regulator is dramatically impaired when the p38 MAPK is over-activated. This suggests that this is crosstalk between the p38 MAPK and GR pathways, which can potentially explain the reduced responsiveness to glucocorticoids in chronic inflammation at the molecular level. Although recent studies (e.g. –) have explored crosstalk and linked local signalling networks together, their approach still artificially divides the whole signalling system into many small-scale subsystems. Since a cellular signalling system is in fact indivisible, such reductionistic approach may have an impact on the accuracy of the inference results. An alternative approach is to infer a cell-scale signalling network without separation. This network captures the emergent properties of a whole-cell signal transduction system. In theory, a cell-scale signalling network can be inferred using existing methods, such as maximum likelihood estimation , least-squares estimation , , non-linear optimization , Kalman filters ,  and approximate Bayesian computation , . However, this holistic approach suffers from three practical issues, which limits the applications of the existing methods:
- The scalability issue. A cell-scale signalling network includes a huge number of proteins and their various forms. For instance, there are 518 kinases  and approximately 150 phosphatases  that together mediate the signalling network in a human cell. Exhaustively measuring all the proteins in a cell-scale signalling network via immunoprecipitation is extremely expensive and frequently impossible. Moreover, unlike regulatory network inference, in which gene expression levels can be measured by high-throughput technologies (e.g., microarray), it is very challenging to precisely quantify a large number of proteins and especially their post-translational modifications . Although the emerging mass spectrometry technique can be successfully used to qualify proteomes , measuring post-translational modified proteins in signalling networks is highly dependent on enrichment methods whose performance is influenced by various factors .
- The measurement issue. It is impractical to individually measure all proteins via immunoprecipitation in a cell-scale signalling network due to their various post-translational modifications and complex formations. For example, in the JAK-STAT signalling pathway, unphosphorylated STAT5, tyrosine phosphorylated monomeric STAT5 and tyrosine phosphorylated dimeric STAT5 are difficult to assess individually .
- The overfitting issue. Few studies have attempted to provide cell-scale signalling networks, and as a result, little is known of their structure. It has been reported that the existing inference methods are likely to overfit for experimental data without structural constraints .
As a result, the methodology of inferring cell-scale signalling networks requires fundamental changes. This paper proposes a new method, called CCELL, that responds to all the three challenging issues described above and flows from the following two key observations:
- Variations of concentrations are sparse due to separations of timescales. The cell-scale signalling networks incorporate biological processes occur over different timescales. Typically, the receptor internalization (s) process triggers phosphorylation and catalysis of proteins (s) that in turn translocate into cell nucleus and induce their target gene expression; the transcriptional regulation process (s), acting as a linkage point, stimulates signal cascading of other signalling pathways . As a result, the concentrations of only a few species in a cell vary significantly at a specific timescale while the concentrations of a large fraction of species remain stable , . This is because the processes over faster timescales reach their steady states instantaneously and the dynamics of the processes over slower timescales can be reasonably ignored. Thus a large number of variations of concentrations are zero or close to zero under a specific timescale, if we define the variations of concentrations as the differences between concentrations of adjacent time points. In other words, variations of concentrations are sparse.
- Combined-measurements can be implemented using cross-reactivity. Due to the cross-reactivity of an antibody, the antibody may bind not only the targeted protein but also other proteins, such as the various molecular forms of the target protein or other proteins in complex with the target protein . This phenomenon frequently affects measurements of the concentration of the target protein in an immunoprecipitation assay. The traditional way is to use an antibody with a high specific affinity under stringent binding conditions in order to obtain accurate results. In contrast to the traditional way, we attempt to use the cross-reactivity of antibodies in order to measure the aggregated concentrations of several proteins in one go. We call this experimental method combined-measurement.
These two key observations motivated us to use compressive sensing as the foundation of our inference method for cell-scale signalling networks. Compressive sensing – is a revolutionary technique for signal reconstruction that uses a sampling rate far lower than the Nyquist-Shannon rate. Assuming that the signal of interest can be represented using a vector, compressive sensing requires that one measurement can acquire an inner product of the signal vector and a predefined measurement vector (i.e. a weighted sum of several predefined elements of the signal vector). All measurement vectors constitute a measurement matrix, while all results of measurements form an observation vector. Recovering the signal from an observation vector is a highly undetermined problem since the number of measurements is typically far lower than the number of elements of the signal vector. Compressive sensing can recover the signal by adding sparse constraints on the signal vector on the condition that the measurement matrix meets a prerequisite called restricted isometry property. Another approach is to use Bayesian compressive sensing that is a probabilistic version of compressive sensing , . The primary advantage of Bayesian compressive sensing is that it does not require the measurement matrix to obey the restricted isometry property, but infers a distribution of the signal vector.
To sum up, Bayesian compressive sensing is based on the following two essential conditions: (I) the signal is sparse in some domain; (II) one measurement can obtain a weighted sum of several elements of the signal vector. Sparse variations and combined-measurements exactly meet these two prerequisites; therefore, Bayesian compressive sensing is a promising technique that can be adapted to infer cell-scale signalling networks from relatively few measurements. Moreover, it avoids measuring proteins individually and uses sparse constraints to prevent the estimated network model from overfitting for the observed data.
Our method, CCELL, is based on Bayesian compressive sensing, aiming at inferring cell-scale signalling networks as a whole from time series data generated by immunoprecipitation assays. In this paper, CCELL is applied to biological networks approximated by linear models. A set of benchmark networks with varying numbers of time-variant species is designed to demonstrate our method. These networks are derived from four well-studied signalling pathways: JAK-STAT, GR, ERK and p38, as well as crosstalk amongst them. Experimental results show that CCELL is effective for inferring benchmark networks without structure constraints. Instead of exhaustively measuring all individual species, high accuracy can be achieved from relatively few measurements.
In this section, the core algorithm of CCELL, Bayesian compressive sensing, is first introduced. Then, we will explain the three sequential steps of CCELL: concentration inference, network inference and inference refinement. The structure of CCELL is detailed in Figure 1.
The CCELL method consists of 3 steps: concentration inference, network inference and inference refinement (including refined concentration inference and refined network inference). The core algorithm of the first two steps is Bayesian compressive sensing. The two substeps in Step 3 are based on Bayesian linear regression and extended Bayesian compressive sensing respectively. The input of CCELL is a measurement matrix and its corresponding observation vectors that are time-series generated by immunoprecipitation assays. The output of CCELL is a refined transition matrix representing the cell-scale signalling network.
Bayesian compressive sensing
Bayesian compressive sensing, introduced by Ji, Xue and Carin , is a probabilistic version of compressive sensing based on the relevance vector machine . Let be the signal of interest that is represented using a -dimensional column vector. The sparsity of a vector is the proportion of (approximate) zero elements. A vector is sparse if its sparsity is greater than a threshold (usually 80%). A measurement matrix is a -dimensional matrix, where is the number of measurements. Typically, is far less than . Each row of is a measurement vector, which is a -dimensional row vector. A measurement is to obtain the inner product of the signal vector and a measurement vector. For example, a measurement vector (i.e. a row of the measurement matrix) is and the signal vector is . The prime symbol means the transpose of a vector or a matrix. The result of this measurement is the sum of the second and fourth elements, which is . An observation vector is -dimensional column vector, each element of which represents a measurement result of the corresponding measurement vector. Assuming the measurement noises are independent additive white Gaussian with mean and the covariance matrix , we can get a system of linear equations as follows: (1)The symbol denotes an identity matrix. For simplicity, the dimension of is various according to different equations without notation in this paper. Equation 1 is usually underdetermined, because the number of measurements is far less than the number of elements of the signal vector . However, the additional assumption that the signal is sparse makes Equation 1 solvable. Bayesian compressive sensing is an inference algorithm to solve Equation 1 using a sparse prior distribution, which is typically Student's t-distribution. Its input is an observation vectors and a measurement matrix . The corresponding output is a distribution of the signal .
Bayesian compressive sensing is an EM style iterative algorithm. Given a hyperparameter vector of the signal , the E-step is to infer a posterior distribution of the signal . The posterior is a multivariate Gaussian distribution with the mean vector and the covariance matrix as follows: (2)(3)where represents a diagonal matrix whose diagonal is the hyperparameter vector . The M-step, based on the variational method, is to calculate an approximately optimal hyperparameters vector using the posterior of calculated in the previous E-step as follows:(4)where and denote the element of the hyperparameter vector and the mean vector respectively; represents the element in the row and column of the covariance matrix .
Before the execution of the Bayesian compressive sensing algorithm, the hyperparameter vector is often set to a random or given value. Then, a posterior distribution of the signal is inferred by the E-step. Subsequently, the M-step update the hyperparameter vector based on the mean vector and the covariance matrix of the posterior distribution inferred in the previous E-step. Afterwards, the updated hyperparameter vector is used to infer a new posterior distribution in the E-step of the next iteration. The Bayesian compressive sensing algorithm iteratively executes the E-step and M-step until stop conditions are satisfied.
According to the workflow in Figure 1, the Bayesian compressive sensing algorithm is used in the concentration inference and network inference steps. This is because that both of the two steps aiming at solving systems of linear equations with sparse constraints, which have identical forms with Equation 1. Bayesian compressive sensing can directly solve these systems of linear equations. More specifically, in Figure 1 the concentration vector , the measurement matrix and the output concentration vector in Step 1 correspond to the observation vector , the measurement matrix and the signal vector in Equation 1 respectively. Similarly, in Step 2 concentration vectors and at two consecutive time points correspond to the observation vector and the measurement matrix , while the transition matrix refers to the signal vector in Equation 1.
Step 1: Concentration inference
Mathematically, combined-measurements are modelled as a system of linear equations: (5) is a concentration vector. Each element of represents the concentration of a species at time , which is an unknown variable to be inferred. The dimension of equals to the number of species in the network, denoted as . is a measurement matrix that is given in advance. Each row of represents a combined-measurement. The dimension of is , where is the number of measurements and is the number of species. is an observation vector. Each element of represents the observed value of a measurement at time . The dimension of is the number of measurements . The random vector is measurement noises with mean and the covariance matrix . The variation of concentrations is defined as the difference between the concentration vectors at two adjacent time points:(6)Similarly, the variation of observations is defined as the difference between observation vectors at two adjacent time points:
(7)The sparsity of variations is defined as the ratio between the number of time-invariant species and the number of all species. This definition is consistent with the definition of sparsity for a vector. According to the observation that the concentrations of only a few species in a cellular system vary significantly over a specific timescale, variations of concentrations are sparse. Therefore, Bayesian compressive sensing can be used to infer variations of concentrations by solving the following system of linear equations: (8)
In wet lab experiments, a cell is perturbed from its steady state by triggers. As a large fraction of species at steady state have zero concentrations , the initial concentrations of all species can be inferred by Bayesian compressive sensing directly. Therefore, it is assumed that initial concentrations are known in this paper. Concentration vector at other time points can be calculated according to Equation 6.
Step 2: Network inference
This paper focuses on the biological networks that can be modelled by a system of linear equations: (9) is a transition matrix, whose elements are unknown variables to be inferred. The dimension of is , where denotes the number of species. is system noises with mean and covariance matrix . The networks modelled by differential equations can be also approximated by linear equations. One method is to define the transition matrix as a function of time, which can be calculated according to Jacobian matrices of the transition function . The other method is to view higher order derivatives of concentrations as first order variables .
According to Equation 9, the row of , , satisfies the following equation: (10)where denotes the element of concentration vector . Equation 10 is only for the time-series profile of species under one perturbation. It can be easily extended to any number of perturbations by successively combining all profiles together. Equation 10 can fit the form of Equation 1. The transpose of the row is the signal to be inferred. The matrix and column vector can be viewed as a measurement matrix and the corresponding observation vector respectively. According to a widely accepted assumption that structures of biological networks are usually sparse , , , Bayesian compressive sensing can be directly used to solve Equation 10. Thus, a posterior of the row of the transition matrix is calculated. Other rows can be independently inferred in a same way.
Step 3: Inference refinement
For an inferred transition matrix outputted by Step 2, the structural indicator is defined as follows: (11)where represents the inferred value of the element in row and column of matrix ; is a threshold parameter. If , there is a link from species to over the predetermined timescale of experiments. If a species has no links with other species, it is called as a silent species over the timescale; otherwise, it is called as an active species. It is noteworthy that a time-invariant species can be an active species, such as an enzyme that catalyses other species without changing its concentration. The process of refinement is to remove silent species in order to formulate a small scale inference problem, which is detailed in Figure 2.
The equations at the left and right side of arrows are original and reduced respectively. According to inferred transition matrix , there are two pathway and crosstalk between them. The species are silent, having no links with others. All elements associated with the silent species are removed from the transition matrix to form the refined transition matrix . All columns measuring the silent species are deleted from the measurement matrix to form the refined measurement matrix . The refined concentration vector, , only keeps the concentrations of active species (e.g., ). An element of the refined observation vector is equal to the corresponding element of the observation vector subtracted by the concentrations of the silent species involved in this measurement. If all species involved in a measurement are silent, simply remove this measurement.
Refined concentration inference.
All silent species over the predetermined timescale are removed. The refined concentration vector, , only contains the concentrations of active species. Each element of represents the concentration of an active species at time , which is an unknown variable to be inferred. The refined measurement matrix is derived from by removing all columns associated with silent species. An element of the refined measurements are calculated by subtracting concentrations of silent species involved in this measurement. Thus, the refined measurement model is as follows: (12)
It is noteworthy that the variations of are not sparse. The assumptions of Bayesian compressive sensing are not satisfied. Instead, Bayesian linear regression is used to infer the posterior distribution of . The posterior is a multivariate Gaussian distribution with the mean vector and the covariance matrix as follows: (13)(14)where and are the mean vector and the covariance matrix of the prior distribution of respectively. The prior distribution of can be calculated using the results of Step 1.
Refined network inference.
Although the refined transition matrix is sparse, it cannot be inferred by Bayesian compressive sensing directly. This is because Bayesian linear regression infers a distribution of rather than a specific value. If we would like to apply Bayesian compressive sensing to infer the distribution of , then only the mean of distribution is used for calculation. In this case some information is ignored. Thus, we extend Bayesian compressive sensing to extract information from distributions not just from their mean.
The E-step of the extended Bayesian compressive sensing infers a posterior distribution of , which represents the row of , from the posterior distributions of the concentrations . The posterior is a multivariate Gaussian distribution with the mean vector and the covariance matrix as follows: (16)(17)where we have:(18) denotes the hyperparameter of . represents a diagonal matrix whose diagonal is vector . The angled brackets denote the expectation of a distribution. represents the covariance of two random variables.
The M-step of the extended Bayesian Compressive sensing, which is identical to Bayesian compressive sensing, aims to calculate approximately optimal hyperparameters using the variational method  as follows: (19)
A set of benchmark cell-scale networks is designed to demonstrate our method. Each cell-scale network contains 300 species, while only a fraction of species are time-variant over the investigated timescale. The dynamics of these networks are modelled using systems of linear functions. The dimensions of the transition matrices are . For a time-invariant species , the elements of row in the transition matrix are all zero except the element having the value of ; for a time-variant species, its corresponding row has more than one non-zero elements to represent its interactions with other species in the network.
The set of benchmark cell-scale networks has varying numbers of time-variant species. The rows of transition matrices for time-variant species are constructed by taking the structures of well-studied signalling pathways: JAK-STAT , GR , ERK , p38 , and crosstalk amongst them , , . Details of the benchmark set are listed in Table 1.
In order to study the effect of perturbations, where various doses or types of inhibitors/stimuli perturb the initial state of the network, different numbers of perturbations are used to simulate benchmark networks. In our simulation, we check the performance of CCELL with the number of perturbations varying from 2 to 7 as these values are frequently used in wet-lab experiments. Under each perturbation, the initial concentration of each species is randomly generated from a normal distribution with mean of , standard deviation of . Concentrations of 300 species at 5 sequential time points are generated using benchmark network model and corresponding initial state. For each time point, 150 combined-measurements are carried out according to a predefined measurement matrix. The measurement matrix is generated using low-density parity-check code . Our experiments only focus on investigating the performance of our method when both system noises and measurement noises are maintained at small level (standard deviation ). The code and benchmark network set are available at http://dsg.doc.ic.ac.uk/publications/ccell/.
Figure 3 depicts RMSE values of inferred concentrations for the 6 benchmark networks under 6 different numbers of perturbations. RMSE values in Figure 3 are calculated using differences between inferred concentrations and true concentrations. Almost all RMSE values are below 0.05, except some outliers. Most of the RMSE values are in the range between 0 and 0.011. This indicates that our method accurately and stably infers the concentrations. It can be clearly observed that the RMSE values are not influenced by the number of perturbations, which is consistent with the principle of our method that concentrations of each time point are inferred independently. As can be seen in Figure 3, there are no significant differences between the RMSE values of different benchmark networks. However, the RMSE values of the two networks with high sparsity of variations, n-4 and n-11, are slightly greater than the other three networks. This might be because prior distributions of Bayesian compressive sensing are not sparse enough.
The 6 subplots depict the results of applying inference method to 6 benchmark networks. For each network, its inference results under different numbers of perturbations, varying from 2 to 7, are shown individually. The median values of RMSE approximate to 0 and the quartile values range from 0.0031 to 0.011.
After obtaining the inferred transition matrix of a network in Step 2, the structure of the network is calculated using structural indicator according to Equation 11. A link from species to are inferred, if = 1. Varying the threshold parameter results in different structures. To show the performance of inferring real links in the target networks, ROC and Precesion-recall curves of 6 benchmark networks under 6 different numbers of perturbations are drawn in Figure 4 and Figure 5 respectively. An inferred link is true positive, if it does exist in the network; otherwise, it is false positive. The average of all AUROC and AUPR values is as high as 0.97 and 0.95 respectively, which demonstrates the effectiveness of our method. As evident from Figure 4 and Figure 5, the AUROC and AUPR values rise up as the number of perturbations increases. This indicates that adding new perturbations is an effective way to boost the performance of structure inference. The sparsity of variations is another factor to affect the performance. The AUROC and AUPR values positively correlate with the sparsity of variations. Figure 6 demonstrates relationships between sensitivity or specificity and threshold parameter for 6 different benchmark networks with different numbers of perturbations varying from 2 to 7. When increases from to , the average sensitivity falls from to and the average specificity maintains close to 1. The decrease of the average sensitivity is significant, while the change of the average specificity is negligible. The stability of the average specificity is caused by high sparsity of cell-scale signalling networks. Thus, we fix to be in the following experiments. For simplicity, we suggest that except special conditions users should set to be 0 for sparse networks.
The performance of structure inference, under 6 different numbers of perturbations (from 2 to 7), is evaluated by ROC curves. Each subplot contains the inference results for 6 benchmark networks. The average AUROC is 0.97. More specifically, the maximum AUROC value 1.0 is achieved by the n-4 network (3–7 perturbations) and the n-11 network (6–7 perturbations), while the minimum AUROC value 0.88 is obtained by the n-58 network (2 perturbations).
The performance of structure inference, under 6 different numbers of perturbations (from 2 to 7), is evaluated by Precision-recall curves. Each subplot contains the inference results for 6 benchmark networks. The average AUPR is 0.95. More specifically, the maximum AUPR value 1.0 is achieved by the n-4 network (3–7 perturbations) and the n-11 network (6–7 perturbations), while the minimum AUPR value 0.75 is obtained by the n-58 network (2 perturbations).
These graphs show the relationships between sensitivity (above) and specificity (below) and threshold parameter for 6 different benchmark networks with different numbers of perturbations varying from 2 to 7. For , the average specificity is 0.9989 and the average sensitivity reaches its maximum value of 0.9453. When increases to , the average specificity is 0.9999 and the average sensitivity decreases to 0.8742. If increases to a relatively large value , the average specificity achieves 1.000 but the average sensitivity becomes 0.8188.
Figure 7 illustrates the RMSE values of transition matrices inferred by both Step 2 and Step 3 for 6 benchmark networks under 6 different numbers of perturbations. RMSE values in Figure 7 are calculated using differences between the elements of the inferred transition matrix and the corresponding elements of true transition matrix. Step 2 infers the transition matrices of a whole network, while Step 3 only infers transition matrices of a refined network only containing active species. In Step 3, the threshold parameter is chosen to be 0. In order to fairly compare the results of Step 2 and Step 3, RMSE values in Figure 7 only calculate the errors in refined transition matrices. Similar to AUROC values, the RMSE value correlates with the number of perturbations and the sparsity of variations. The correlation between the RMSE value and number of perturbations is much stronger than the correlation between the RMSE value and sparsity of variations. It can be seen in Figure 7 thatz the RMSE value decreases significantly to a stable and small value as the number of perturbations increases. The number of perturbations required to reach a stable RMSE value varies across different networks with various sparsity of variations. For the results of Step 3, the n-4 network only needs 3 perturbations, while the n-39 network requires 5 perturbations. It is visible that the convergence rate of results of Step 3 is higher than that of Step 2. What's more, the RMSE values of Step 3 are always smaller than those of Step 2. The RMSE ratios (Step 3/Step 2) vary from 0.14% to 51% with the mean value of 17%, which demonstrates Step 3 substantially improves the performance of transition matrix estimation. It is also clear that Step 3 is more robust than Step 2 under varying number of perturbations.
These charts show the results of both Step 2 and Step 3 for 6 different benchmark networks with different numbers of perturbations varying from 2 to 7. In Step 2, the RMSE values range from to with the mean value of ; in Step 3, the RMSE values range from to with the mean value of . The RMSE ratios (Step 3/Step 2) vary from 0.14% to 51% with the mean value of 17%.
Figure 8 shows the relationship between the average variance for all elements of the inferred transition matrix according to Equation 16 and their RMSE values. The RMSE values range from to , while the average variance varies from to . As illustrated by Figure 8, the RMSE value and the average variance have strong correlation that can be well fitted by a quadratic curve, having the Spearman's correlation coefficient to be 0.94. Thus, the average variance is a promising way to represent the accuracy of the inference results when RMSE cannot be calculated due to the unavailability of the real transition matrix. One potential usage of average variance is to adjust the threshold parameter . Specifically, when we get different inference results using different , we can choose the most appropriate value which results with lowest average variance.
Each point represents an experiment for a benchmark network under a specific number of perturbations. For example, 2-n-53 means the experiment for n-53 network under 2 perturbations. The x-coordinate indicates the natural logarithm of the average variance for all elements in the refined transition matrix, while the y-coordinate indicates the RMSE values of the refined transition matrix. The RMSE values range from to and the average variance varies from to .
We stress that the promising results obtained in the above experiments are conditioned on stringent constraints of noises. To investigate the performance of our method in the presence of significant noises, the noises are set to be higher than those in previous experiments. That is, the standard deviations of noises vary from 10 to 1 (signal mean is 100). For n-39 network under 6 perturbations, Figure 9 reveals the relationship between noise levels and the RMSE values of transition matrices inferred by both Step 2 and Step 3. The RMSE values of Step 3 can be always achieved larger or close to those obtained in Step2. The RMSE values of both steps gradually decline with the reduced noise levels. The RMSE values of Step 2 have been decreased by 94%, while the decrease for Step 3 is 44%.
This chart shows the RMSE values for inferred transition matrices of n-39 network under 6 perturbations at different noise levels. The standard deviations of noises vary from 10 to 1. In Step 2, the RMSE values range from to ; in Step 3, the RMSE values range from to .
This paper addresses the problem of inferring a cell-scale signalling network as a whole without dividing it into several local networks. We propose a method, which is called CCELL, to solve this problem. The core of this method is Bayesian compressive sensing. To meet the prerequisites of Bayesian compressive sensing, our method is based on two key observations: 1) variations of concentrations are sparse due to separations of timescales; 2) combined-measurements can be implemented using cross-reactivity. To the best of our knowledge, CCELL is the first attempt to infer cell-scale signalling networks from a holistic perspective by exploring separation of timescales and cross-reactivity. We demonstrate that CCELL is effective for inferring benchmark cell-scale networks without structure constraints. Instead of exhaustively measuring all individual species, we show that combined measurements are sufficient to infer the network model with acceptable accuracy, where equals to the half of the total number of species in the network.
This paper models biological networks as linear dynamical systems. A classical algorithm to infer the parameters of a linear dynamical system is the expectation maximization (EM) algorithm. The E-step is to infer a distribution of hidden variables (concentrations) using the forward-backward algorithm based on current estimates of parameters. The M-step is to update parameters based on the distribution of hidden variables inferred in the E-step. The E-step and M-step are executed in an iterative way. An advantage of the forward-backward algorithm is that it uses the transition matrix of two adjacent time points of hidden variables to boost the accuracy of hidden variables. However, the transition matrix inferred in M-step is not very accurate, especially when observed data is scarce, while the forward-backward algorithm assumes the transition matrix is highly accurate. This will usually make the EM algorithm overfit for the observed data. Thus, CCELL uses a two-step style rather than an EM style to avoid overfitting.
The measurement matrices in the experiments are generated using low-density parity-check code. In the future, we will study the similarity of all involved proteins, such as their sequence and 3D structures, in order to build a database holding candidates of combined-measurements. All measurements in wet-lab experiments will be selected from this database. This paper focuses on inferring cell-scale signalling networks over a predetermined timescale. By repeating the measurement and inference procedures over different timescales, multiple timescale-specific network models can be obtained. How to integrate them into a unified whole is itself an attractive problem.
CCELL is a promising routine to reveal the mechanism of a complex cellular signal transduction system from a holistic perspective. The current situation, where cell-scale signal transduction models are rarely built due to its difficulty, may be changed. Signalling network databases can be built more efficiently by incorporating much more cell level models to comprehensively understand complex biological processes. Better understanding of complex biological processes is fundamental to understand life and design drugs.
Conceived and designed the experiments: LN XY IA ZX YG. Performed the experiments: XY. Analyzed the data: LN XY YG. Contributed reagents/materials/analysis tools: XY. Wrote the paper: LN XY IA ZX YG. Supervised the project: YG.
- 1. Kolch W (2000) Meaningful relationships: the regulation of the ras/raf/mek/erk pathway by protein interactions. Biochemical Journal 351: 289–305.
- 2. Swameye I, Müller T, Timmer Jt, Sandra O, Klingmüller U (2003) Identification of nucleocytoplasmic cycling as a remote sensor in cellular signaling by databased modeling. Proceedings of the National Academy of Sciences 100: 1028–1033.
- 3. Hendriks BS, Hua F, Chabot JR (2008) Analysis of mechanistic pathway models in drug discovery: p38 pathway. Biotechnology Progress 24: 96–109.
- 4. Bonifacino JS, Dell'Angelica EC, Springer TA (2001) Immunoprecipitation. Current Protocols in Immunology 41: 8.3.1–8.3.28.
- 5. Shuto T, Imasato A, Jono H, Sakai A, Xu H, et al. (2002) Glucocorticoids synergistically enhance nontypeablehaemophilus influenzae-induced toll-like receptor 2 expression via a negative cross-talk with p38 map kinase. Journal of Biological Chemistry 277: 17263–17270.
- 6. Wang Z, Yang H, Tachado SD, Capó-Aponte JE, Bildin VN, et al. (2006) Phosphatase-mediated crosstalk control of erk and p38 mapk signaling in corneal epithelial cells. Investigative Ophthalmology & Visual Science 47: 5267–5275.
- 7. Junttila MR, Li SP, Westermarck J (2008) Phosphatase-mediated crosstalk between mapk signaling pathways in the regulation of cell survival. The FASEB Journal 22: 954–965.
- 8. Guo X, Wang XF (2009) Signaling cross-talk between tgf-β/bmp and other pathways. Cell Research 19: 71–88.
- 9. Kreeger PK, Lauffenburger DA (2010) Cancer systems biology: a network modeling perspective. Carcinogenesis 31: 2–8.
- 10. Sontag E, Kiyatkin A, Kholodenko BN (2004) Inferring dynamic architecture of cellular networks using time series of gene expression, protein and metabolite data. Bioinformatics 20: 1877–1886.
- 11. Schmidt H, Cho KH, Jacobsen EW (2005) Identification of small scale biochemical networks based on general type system perturbations. FEBS Journal 272: 2141–2151.
- 12. Mendes P, Kell DB (1998) Non-linear optimization of biochemical pathways: applications to metabolic engineering and parameter estimation. Bioinformatics 14: 869–883.
- 13. Quach M, Brunel N, d'Alché Buc F (2007) Estimating parameters and hidden variables in non-linear state-space models based on odes for biological networks inference. Bioinformatics 23: 3209–3216.
- 14. Sun X, Jin L, Xiong M (2008) Extended kalman filter for estimation of parameters in nonlinear state-space models of biochemical networks. PloS ONE 3: e3758.
- 15. Toni T, Welch D, Strelkowa N, Ipsen A, Stumpf MP (2009) Approximate bayesian computation scheme for parameter inference and model selection in dynamical systems. Journal of the Royal Society Interface 6: 187–202.
- 16. Yang X, Guo Y, Guo L (2013) An iterative parameter estimation method for biological systems and its parallel implementation. Concurrency and Computation: Practice and Experience.
- 17. Manning G, Whyte DB, Martinez R, Hunter T, Sudarsanam S (2002) The protein kinase complement of the human genome. Science 298: 1912–1934.
- 18. Forrest AR, Ravasi T, Taylor D, Huber T, Hume DA, et al. (2003) Phosphoregulators: protein kinases and protein phosphatases of mouse. Genome Research 13: 1443–1454.
- 19. Hecker M, Lambeck S, Toepfer S, Van Someren E, Guthke R (2009) Gene regulatory network inference: data integration in dynamic models - a review. Biosystems 96: 86–103.
- 20. Choudhary C, Mann M (2010) Decoding signalling networks by mass spectrometry-based proteomics. Nature Reviews Molecular Cell Biology 11: 427–439.
- 21. Dunn JD, Reid GE, Bruening ML (2010) Techniques for phosphopeptide enrichment prior to analysis by mass spectrometry. Mass Spectrometry Reviews 29: 29–54.
- 22. Xiong H, Choe Y (2008) Structural systems identification of genetic regulatory networks. Bioinformatics 24: 553–560.
- 23. Papin JA, Palsson BO (2004) The jak-stat signaling network in the human b-cell: an extreme signaling pathway analysis. Biophysical journal 87: 37–46.
- 24. Bhalla US, Iyengar R (1999) Emergent properties of networks of biological signaling pathways. Science 283: 381–387.
- 25. Weng G, Bhalla US, Iyengar R (1999) Complexity in biological signaling systems. Science 284: 92–96.
- 26. Frank SA (2002) Chapter 4: specificity and cross-reactivity. In: Immunology and Evolution of Infectious Disease, Princeton University Press.
- 27. Candès EJ, Romberg J, Tao T (2006) Robust uncertainty principles: exact signal reconstruction from highly incomplete frequency information. IEEE Transactions on Information Theory 52: 489–509.
- 28. Donoho DL (2006) Compressed sensing. IEEE Transactions on Information Theory 52: 1289–1306.
- 29. Candès EJ, Tao T (2006) Near-optimal signal recovery from random projections: Universal encoding strategies? IEEE Transactions on Information Theory 52: 5406–5425.
- 30. Tipping ME (2001) Sparse bayesian learning and the relevance vector machine. The Journal of Machine Learning Research 1: 211–244.
- 31. Ji S, Xue Y, Carin L (2008) Bayesian compressive sensing. IEEE Transactions on Signal Processing 56: 2346–2356.
- 32. Bishop CM, Tipping ME (2000) Variational relevance vector machines. In: Proceedings of the Sixteenth Conference on Uncertainty in Artificial Intelligence. Morgan Kaufmann Publishers Inc., pp. 46–53.
- 33. August E, Papachristodoulou A (2009) Efficient, sparse biological network determination. BMC Systems Biology 3: 25.
- 34. Yeung MKS, Tegnér J, Collins JJ (2002) Reverse engineering gene networks using singular value decomposition and robust regression. Proceedings of the National Academy of Sciences 99: 6163–6168.
- 35. Necela BM, Cidlowski JA (2004) Mechanisms of glucocorticoid receptor action in noninflammatory and inflammatory cells. Proceedings of the American Thoracic Society 1: 239–246.
- 36. Gallager R (1962) Low-density parity-check codes. IRE Transactions on Information Theory 8: 21–28.