The development of heme oxygenase (HO) inhibitors is critical in dissecting and understanding the HO system and for potential therapeutic applications. We have established a program to design and optimize HO inhibitors using structure-activity relationships in conjunction with X-ray crystallographic analyses. One of our previous complex crystal structures revealed a putative secondary hydrophobic binding pocket which could be exploited for a new design strategy by introducing a functional group that would fit into this potential site. To test this hypothesis and gain further insights into the structural basis of inhibitor binding, we have synthesized and characterized 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone (QC-308). Using a carbon monoxide (CO) formation assay on rat spleen microsomes, the compound was found to be ∼15 times more potent (IC50 = 0.27±0.07 µM) than its monophenyl analogue, which is already a potent compound in its own right (QC-65; IC50 = 4.0±1.8 µM). The crystal structure of hHO-1 with QC-308 revealed that the second phenyl group in the western region of the compound is indeed accommodated by a definitive secondary proximal hydrophobic pocket. Thus, the two phenyl moieties are each stabilized by distinct hydrophobic pockets. This “double-clamp” binding offers additional inhibitor stabilization and provides a new route for improvement of human heme oxygenase inhibitors.
Citation: Rahman MN, Vlahakis JZ, Vukomanovic D, Lee W, Szarek WA, Nakatsu K, et al. (2012) A Novel, “Double-Clamp” Binding Mode for Human Heme Oxygenase-1 Inhibition. PLoS ONE 7(1): e29514. https://doi.org/10.1371/journal.pone.0029514
Editor: Vladimir N. Uversky, University of South Florida College of Medicine, United States of America
Received: October 14, 2011; Accepted: November 29, 2011; Published: January 19, 2012
Copyright: © 2012 Rahman et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was supported by the Canadian Institute of Health Research (http://www.cihr-irsc.gc.ca, CIHR MOP-64305, CIHR MOP-77810). Dr. Zongchao Jia is a Killam Research Fellow and holds a Canada Research Chair in Structural Biology. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
The heme oxygenase (HO) system comprises two active isozymes (HO-1 and HO-2) which are involved in the regioselective, oxidative cleavage of heme at the α-meso carbon. Cleavage results in the release of equimolar amounts of the gasotransmitter carbon monoxide (CO), ferrous iron (Fe2+), and biliverdin, the latter of which is reduced further by biliverdin reductase to form bilirubin – (Figure 1). A third isozyme, HO-3, has been deemed inactive despite exhibiting ∼90% sequence identity with HO-2 . Of the two active isozymes, HO-1 is a ∼32 kDa stress protein found to be predominantly expressed in the spleen and inducible by a variety of stimuli including heat shock, heavy metals, heme and reactive oxygen species (ROS). The constitutive HO-2, a ∼36.5-kDa protein, is widely distributed with its highest concentration in the brain and testes.
The HO reaction comprises ∼85% of the CO produced in humans under normal physiological conditions. CO has been found to be one of the most important gasotransmitters in the body, with evidence demonstrating regulatory involvement in anti-inflammatory, antiapoptotic, antiproliferative and vasodilatory effects –. Both biliverdin and bilirubin act to scavenge free radicals such as superoxide, peroxyl radicals and peroxynitrite, making them both powerful antioxidants –; indeed, bilirubin has been shown to provide protection against oxidative stress-induced pathologies . In general, the HO system has demonstrated a protective role against many diseases including ischaemia-reperfusion injury and endotoxic shock, as well as against graft rejection . HO-1 has been found to do be upregulated in several cancers, including pancreatic and prostate, and in response to several anticancer treatments –.
The development of isozyme-selective HO inhibitors should provide powerful pharmacological tools in understanding the HO/CO system, elucidating the mechanisms underlying its physiological effects, as well as opening the door to potential therapeutic applications. Historically, the major inhibitors used to date have been the metalloporphyrins (e.g. tin/zinc/chromium protoporphyrin) which act as competitive inhibitors due to their structural similarity to the heme substrate. However, since heme is essential for a number of biologically relevant enzymes, including cytochrome P450, nitric oxide synthase (NOS) and soluble guanylyl cyclase (sGC), the use of structural analogues to heme is limited due to their lack of selectivity. Indeed, this has led to some concerns about the interpretation of results and resultant conclusions from previous studies of the HO/CO system –. It should be noted, however, that studies have also demonstrated that some of these metalloporphyrins do maintain selectivity against HO in vitro if used within a defined concentration range; however, this is restricted to chromium mesoporphyrin IX at concentrations up to 5 µM . Thus, there is an obvious and pressing need to develop isoselective HO inhibitors.
Our laboratory has been focused on a program aimed at the design of novel, non-porphyrin based, isozyme-selective HO inhibitors based on the structure of (2S, 4S)-2-[2-(4-chlorophenyl)ethyl]-2-[(1H-imidazol-1-yl)methyl]-4-[((4-aminophenyl)thio)methyl]-1,3-dioxolane (azalanstat, Figure 2), which was discovered as a potent and selective inhibitor of HO . This program has resulted in the discovery of several novel, azole-based compounds, deemed QC-xx, which selectively and non-competitively inhibit HO without affecting NOS or sGC, except at high millimolar concentrations, and do not induce expression of NOS, sGC, or HO-1 . Recently, we have also discovered that replacing the imidazole by triazole or tetrazole greatly decreases the ability of this series of compounds to inhibit the cytochrome P450 family of drug metabolizing enzymes . We have been successful in identifying several compounds as potent and selective inhibitors of HO-1 , –. Preliminary data show some of these compounds to be able to attenuate the tumour size and metastases of breast cancer cells (Dercho et al., unpublished results). Moreover, several of our compounds are already being used by other research groups as tools to dissect HO function .
As part of our program to “build a better inhibitor” we have complemented functional analyses with structural studies of complexes formed between human HO-1 and various QC-xx complexes (Figure 2) using X-ray crystallography (reviewed in ). We have successfully crystallized complexes with 1-(adamantan-1-yl)-2-(1H-imidazol-1-yl)ethanone (QC-82) , 4-phenyl-1-(1,2,4-1H-triazol-1-yl)-2-butanone (QC-86) , and (2R, 4S)-2-[2-(4-chlorophenyl)ethyl]-2-[(1H-imidazol-1-yl)methyl]-4-[((5-trifluoromethylpyridin-2-yl)thio)methyl]-1,3-dioxolane (QC-80) . These structures, in addition to that of 2-[2-(4-chlorophenyl)ethyl]-2-[1H-imidazol-1-yl)methyl]-1,3-dioxolane (QC-15) with rat HO-1 , have enabled the identification of key features required for binding to hHO-1 as well as the mechanism underlying its inhibition, and insights toward the design of more effective inhibitors. In general, these azole-based inhibitors exhibit a common binding and inhibition mode. The azole moiety in the eastern region serves as an anchor which coordinates with the iron atom through nitrogen 3 to form a hexacoordinate heme. Replacement of imidazole with a triazole anchor may provide additional stability by the formation of a hydrogen bond between the additional nitrogen atom and the protein's distal helix. The linker in the central region attaches this anchor to a hydrophobic group in the western region which fits into a hydrophobic pocket in the distal region of the heme-binding pocket. While hydrophobic and stacking interactions contribute to the stability of this region, halogenation is also accommodated in this western region putatively due to the presence of Met34 in the pocket or, alternatively, greater and more points of contact within the pocket. The distal helix of the enzyme has an inherent flexibility which allows for a range of bulky functional groups without displacing the heme moiety or the catalytically critical Asp140. The proximal helix was also found to have some degree of flexibility; interaction of QC-80, containing a large northeastern substituent, induces a conformational change to “unkink and extend” the helix and induce the formation of a peripheral hydrophobic pocket to accommodate this group. As a result, binding of the QC-xx inhibitors to the distal side of the heme binding pocket results in the disruption of an ordered hydrogen bond network involving Asp140 and displacement of a catalytically critical water molecule, to inhibit heme oxidation.
Previously, one of our crystal structures of inhibitor-complexed hHO-1 revealed a putative, proximal secondary hydrophobic pocket not apparent in other complex or native structures . To explore the potential of this site, we developed a new design strategy to create compounds which would occupy both hydrophobic pockets simultaneously in order to increase potency. Thus, we have synthesized and characterized 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone (QC-308), the diphenyl analogue of one of our most potent inhibitors, (4-phenyl-1-(1H-imidazol-1-yl)-2-butanone (QC-65; IC50 = 4.0±1.8 µM) , which contains an additional phenyl group in the western region of the compound, in contrast to the usual single hydrophobic moiety found in most of this series (Figure 3). Notably, since QC-65 is already one of the most potent inhibitors, further improvement in potency was very challenging and required a new strategy such as the one exploited to create QC-308. The X-ray crystal structure of the inhibitor-hHO-1 complex definitively demonstrates the presence of a secondary hydrophobic pocket which acts to stabilize the second phenyl moiety of this structure in addition to the distal hydrophobic pocket common to previous structures. As a result, the two phenyl moieties each fit into separate hydrophobic pockets. This “double-clamp” binding mode, thus, most likely accounts for the increased potency of this inhibitor by providing additional stabilization, thereby providing for improvement of human heme oxygenase inhibitors.
QC-65 lacks the second phenyl moiety.
Results and Discussion
Synthesis and Functional Characterization of QC-308
In this study, we report the synthesis and characterization of 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone (QC-308), the diphenyl analogue of one of our most potent HO inhibitors, QC-65 . The synthesis involved bromination of commercially available 4,4-diphenyl-2-butanone to afford 1-bromo-4,4-diphenyl-2-butanone, followed by nucleophilic displacement of the bromo group by imidazole to give 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone and conversion into its hydrochloride QC-308. One of our initial crystal structures of inhibitor-complexed hHO-1 revealed a putative, secondary hydrophobic pocket proximal to the distal pocket, not observed in other native or complexed structures . In that previous analysis, it was suggested that this secondary pocket was induced upon binding of inhibitor as it was not apparent in the high resolution native structure. At the time, it was postulated that it may accommodate the bulky group in the thio-(4-aminophenyl) region of azalanstat which we later refuted by the observation of the inducible binding mode of hHO-1 with QC-80 . Thus, to exploit this putative interaction, we modified our strategy and QC-308 was designed to contain two phenyl groups which would occupy both hydrophobic pockets simultaneously (Figure 3). Initial screening of QC-308 using a CO formation assay with rat spleen microsomal fractions gave an IC50 of 0.27±0.07 µM (Figure 4), ∼15-fold more potent than its monophenyl analogue (IC50 = 4.0±1.8 µM, ).
Enzyme activity was determined by measuring the CO produced in 15 min from 50 µM methemalbumin using 0.5 mg/mL rat spleen microsomes. The IC50 was determined by nonlinear regression using GraphPad Prism version 4. Curves represent two independent trials, with each performed in duplicate.
Binding of QC-308 to the truncated, recombinant hHO-1 protein used for crystallization was also assessed spectrally. As seen with our previous azole-based inhibitors , , in the absence of inhibitor, the heme-bound hHO-1 showed a characteristic spectrum with a Soret peak of 404 nm. In the presence of increasing amounts of inhibitor (1–25 µM), the peak was red-shifted up to 410 nm with a more prominent shoulder centred at 355 nm (Figure 5A). The increases in secondary peaks at 535 and 560 nm with a decrease at 630 nm were also similar to what was previously observed with this type of inhibitor , thus implying a change in the heme environment and putative binding of the inhibitor. Heme degradation in the presence of increasing amounts of inhibitor was initiated by the addition of l-ascorbic acid, and followed for 90 minutes. Heme absorbance was half-maximal by 11–12 minutes in the absence of inhibitor, which was retarded with increasing amounts of QC-308 (Figure 5B). Initial rates were determined for each condition by calculating the rate of change of absorbance over the initial linear portion of the graph (between 2–3 min), according to its respective Soret peak. At a concentration of 25 µM the Soret peak had shifted to 410 nm, and the initial rate had decreased to 9.8±0.5% of the control (Figure 5C). A full spectral analysis was also performed after the 90 minutes to measure the attenuation of heme degradation by QC-308. With increasing amounts of inhibitor, there was a concomitant increase in the height of the Soret peak indicating the amount of intact heme remaining; at 25 µM, 71.6±3.0% of the original heme was undegraded cf. 31.1±0.3% for the control (Figure 5D).
(A) Heme-conjugated hHO-1 (10 µM) in 20 mM potassium phosphate (pH 7.4) was incubated with increasing concentrations of QC-308 at room temperature. Absorbances were measured over a range of 300-700 nm at intervals of 1 nm, and values were corrected for buffer (20 mM potassium phosphate, pH 7.4). The assays were performed in duplicate and the values averaged. The Soret peak gradually shifted from 404 to 410 nm with increasing concentrations of QC-308. Secondary peaks centered at 535 and 560 nm were amplified with increasing concentrations of inhibitor, while a third minor peak at 630 nm decreased until no longer detectable at high inhibitor concentrations (B) Heme degradation rates in the presence of QC-308. Heme degradation was subsequently initiated by the addition of 1 mM l-ascorbic acid and allowed to proceed for 90 min at room temperature. Absorbances were measured at 404, 406, 408 and 410 nm at 1 min intervals and normalized to the initial absorbance (t = 0) for the respective condition. Graph is representative of one replicate for each condition at the wavelength of its Soret peak (indicated in legend). (C) Initial rates were determined for each condition over a period of 1 min (from t = 2–3 min) at the wavelength corresponding to its respective Soret peak as indicated in the legend in (B). For each replicate, values were normalized to the respective control condition, and subsequently averaged. Parallel reactions were also performed for heme-conjugated hHO-1 in the absence of both inhibitor and electron donor (l-ascorbic acid) as a negative control (i.e., no oxidative degradation). (D) Spectral analysis following heme degradation. Absorbances were measured and analyzed as described in (A). Heme degradation corresponded to the disappearance of the Soret peak. Increasing concentrations of inhibitor resulted in increased attenuation of the loss of the Soret peak as well as of the secondary peaks at 535 and 560 nm but the appearance of a peak at 699 nm. Inset depicts the fraction of heme still undegraded after the 90 min reaction, relative to that present at t = 0 for each condition.
There appears to be a discrepancy in the potency of this compound between the CO formation assay on spleen microsomes and the optical assay with recombinant protein. Notably, the initial rate was decreased to ∼50% by 10 µM i.e. a 1∶1 enzyme∶inhibitor molar ratio which is much higher than the IC50 (0.27 µM) determined with the microsomal preparation. Indeed, this discrepancy was observed in previous studies comparing results from spleen microsomes and this recombinant truncated hHO-1 which revealed that the longer, native form of HO-1 was more susceptible to inhibition than the truncated form .
Crystallization and Structure Determination of hHO-1 in Complex with QC-308
Similar to previous co-crystallization studies with the azole-based HO-inhibitors, binding of QC-308 to hHO-1 was confirmed prior to setting up co-crystallization trials by spectral analyses. Protein was incubated with QC-308 at a 1∶3 molar ratio, respectively, resulting in a shift in the Soret peak from 404 nm to 410 nm, similar to what had been observed previously , , thus verifying binding. Co-crystallization trials were based on previous conditions and resulted in crystals very similar to those obtained previously from both native and hHO-1 in complex with the previous azole-based inhibitors. Diffraction data were obtained to a resolution of 2.85 Å. In contrast to previous native – and complex structures of hHO-1 , , –, the data were assigned to the P212121 space group with larger unit cell dimensions. Interestingly, this is similar to that found for the hHO-2 crystal structure . Molecular replacement was carried out as previously described using the native heme-conjugated hHO-1 complex (PDB code 1N3U, A chain) as the initial probe. Two unambiguous solutions, corresponding to the two molecules in the asymmetric unit, were obtained (LLG = 2315) and the position of the inhibitor was clear from the resultant Fo-Fc map following initial refinement. The structure was refined to an R of 0.223 and Rfree of 0.264. A total of 26 water molecules were added to the structure as well as one molecule of 1,6-hexanediol (Figure S1). The Ramachandran plot demonstrated no residues in the disallowed region. Diffraction and final refinement statistics are given in Table 1.
The two molecules in the asymmetric unit (A and B) were virtually superimposable with a Cα RMSD of 0.391 Å (upon alignment of all atoms). The greatest discrepancy was observed in the distal helix (Gly144: 1.286 Å) (Figure S2), which is not surprising given its inherent flexibility . Density corresponding to a molecule of 1,6-hexanediol was also only observed in molecule A. The position of this molecule was remote from the inhibitor binding site and was, thus, deemed irrelevant to the protein's interaction with QC-308. In general, the density associated with molecule A was more disordered and less complete than that associated with molecule B. As such, all further analyses will be focused on molecule B.
The overall structure of hHO-1 in complex with QC-308 was similar to previous structures determined for the protein with the azole-based inhibitors, generally following the common binding mode already established for most of this type of inhibitor (reviewed in ). In brief, the inhibitor binds to the distal side of heme in the heme-binding pocket with the imidazolyl group serving as the sixth ligand of coordination with the heme iron i.e. the anchor for the binding (Fe–imidazolyl distance = 2.1 Å) (Figure 6A). The western region of the inhibitor fits into the hydrophobic pocket which extends back towards the distal side of the heme binding pocket with the distal helix shifting outward to accommodate this region. Alignment with the “closed”, more active, form of the native holoenzyme (PDB Code #1N45) shows a maximal shift outward of 2.349 Å (Gln145) in this distal helix. Interestingly, the distal helix does not shift as much as was observed in binding the QC-82 compound (PDB Code # 3CZY) which contains the bulky adamantanyl substitutent in the western region, despite the larger area taken up by the diphenyl moiety; the Gly144 residue is shifted 2.972 Å further with QC-82 than the current complex structure. Moreover, comparison with the complex of hHO-1 with QC-80, which contains a bulky substituent in the northeastern region, indicated that the induced shift of the proximal helix observed in that complex resulting in a novel, proximal hydrophobic pocket to accommodate the bulky 5-trifluoromethylpyridin-2-yl group  is also not necessary (Figure S2). In fact, the QC-308 compound seems to “slide” easily into its binding site with relatively little conformational change to the native structure.
(A) Ribbon diagram of the inhibitor binding site. Heme (orange) and QC-308 (yellow) are depicted as stick models. An omit map (Fo-Fc) contoured at 2σ is superimposed. Dashed lines indicate coordination of imidazole nitrogens of QC-308 and His25 with the heme Fe. Residues involved in inhibitor binding are indicated. (B) Electrostatic surface potentials revealing the presence of two distal hydrophobic pockets (1° HP and 2° HP) which accommodate the two phenyl groups of QC-308: a “double-clamp”. Dashes indicate coordination of the imidazole group with the heme Fe. Blue and red colours indicate positive and negative electrostatic potentials, respectively, as calculated using PyMOL .
Examination of the electrostatic surface representation of the hHO-1–QC-308 structure shows the presence of the distal hydrophobic pocket which accommodates one of the two phenyl groups (Figure 6B). Moreover, the second phenyl moiety fits comfortably into a secondary proximal hydrophobic pocket, very similar to but larger than that observed previously. Analysis of the protein residues within van der Waals distance of the inhibitor (Table S1) indicates that metal coordination and hydrophobic interactions stabilize its binding. No hydrogen bond networks, seen to be involved in the stabilization of some previous compounds, were apparent in this structure. Thus, it appears that the two hydrophobic pockets serve as a “double-clamp” to stabilize the two phenyl groups in the western region of this compound and increase the stability of the complex, making for a more potent inhibitor than those previously designed.
Isozyme-selectivity of QC-308
The QC-308 compound was also screened for inhibitory activity against HO-2 using rat brain microsomal fractions. Using the CO formation assay, an IC50 of 0.46±0.15 µM was obtained (Figure 7), comparable to that of HO-1. Parallel experiments were also performed using a recombinant hHO-2 truncation derivative (1–264 amino acids with an N-terminal His–tag) to allow comparison with the hHO-1 truncated protein (Figure 8). Interestingly, the spectral changes upon addition of QC-308 were similar to those seen for hHO-1, implying a similar change in the heme environment (Figure 8A). It should be noted that, in this system, the rate of heme degradation for the truncated hHO-2 (0.013±0.012 pmol CO/min) was found to be less than that of hHO-1 (0.060±0.002 pmol CO/min), as observed by the shallower curves; heme absorbance was half-maximal by 42–44 minutes (cf. 11–12 minutes for hHO-1) (Figure 8B). Increasing the inhibitor concentration also attenuated the degradation of heme as observed by the heights of the Soret peaks measured after the reaction; 25 µM of QC-308 resulted in 87.2±1.9% of the original heme still undegraded cf. 32.8±0.7% for the control. Interestingly, the potency of inhibition with this truncation derivative is also discrepant relative to the CO formation assay. It should be noted that in our previous comparisons of native versus recombinant HO-2, the results were more comparable. However, the recombinant protein used in that study was a GST-fusion derivative which also contained a Cys127Ala mutation which disrupts HRM3, one of HO-2's heme regulatory motifs (HRMs).
Enzyme activity was determined by measuring the CO produced in 15 min from 50 µM methemalbumin using 0.5 mg/mL rat brain microsomes. Calculations were performed as described for Figure 4.
Analyses were done in parallel to those in Figure 5.
Previous analyses of QC-65 had revealed IC50 values of 4.0±1.8 µM and 11.3±4.7 µM against HO-1 and HO-2, respectively, using the CO formation assay with rat spleen and brain microsomes . Isoselectivity was seen when the central ketone group of QC-65 was changed to a dioxolane (QC-57; 2-[2-phenylethyl]-2-[(1H-imidazol-1-yl)methyl]1,3-dioxolane) with IC50's of 0.7±0.4 µM and >100 µM for HO-1 and HO-2, respectively . It would be interesting to see if a diphenyl analogue of this compound could further improve potency while maintaining isoselectivity.
In order to try and determine the basis of isoselectivity, we turned again to structural analyses. The crystal structure of a truncated derivative of hHO-2 (1–264; Cys127Ala) has been determined (PDB Code #2QPP) . Alignment of this structure of the native hHO-2 holoenzyme with that of the hHO-1–QC-308 complex confirmed that the catalytic cores of these two enzymes are structurally conserved  with an RMSD of 0.874 Å over the 202 aa alignment length. Closer inspection of the residues involved in QC-308 interaction in hHO-1 showed no significant changes in hHO-2 which may account for the isozyme-selective behaviour (Figure 9) seen when the ketone is changed to a dixolane group. Indeed, of the contact residues, only four differences were seen between the two isozymes: Phe167Tyr, Val50Ala, Met34Val, and Leu213Ile. The Cys127 residue comprising HRM3 (mutated to Ala in the HO-2 structure) is remote from the heme/inhibitor binding site implying that it also may not be involved in attributing selectivity on its own. Moreover, it is not immediately apparent as to why the two recombinant proteins would have such different catalytic rates in the optical assay.
Residues involved in QC-308 binding are depicted as stick models, as are heme and QC-308 (yellow). The two structures are virtually identical in this catalytic core. Residues of hHO-2 which differ amongst the contact residues of the hHO-1 inhibitor binding site are depicted in red. Structural alignments were performed using “Superpose” in CCP4 , .
The greatest sequence divergence between HO-1 and HO-2 lies within the C-terminal domain which contains a membrane-binding domain, with a second region around Cys127 in HO-2 (i.e. HRM3) . Studies comparing recombinant full-length HO-1 protein and a soluble 30 aa truncated protein indicated that the C-terminal 23 amino acids are essential for maximal activity (2–5× when measuring bilirubin formation) , . The C-terminal domain is thought to mediate the formation of a high-affinity complex with cytochrome P-450 reductase, as well as, membrane incorporation, thus resulting in increased activity . The C-terminus seems to have a regulatory role in both of these isozymes. In HO-1, cleavage of 52 aa at the C-terminus affects nuclear import, leading to activation of genes associated with protection against oxidative stress . In HO-2, heme regulatory motifs (HRM1 and HRM2) are located in this region and act as a thiol/disulfide redox switch to modulate heme affinity depending on the oxidation state of the environment. Early studies suggested that these HRMs are additional heme binding motifs –. However, more recent studies have shown that the HRMs affect the heme Kd, but not the kcat for heme degradation, without binding additional heme moieties , . Moreover, spectral studies suggest Cys265 of HRM1 competes with His45 as an axial ligand to ferric heme bound to HO-2 under reducing conditions . Unfortunately, the crystal structures of both human HO-1 and HO-2 are of truncated proteins which lack this region. Furthermore, in the HO-2 structure, both the membrane binding domain and two heme regulatory motifs (HRM1 and HRM2) are missing while HRM3 has been removed by a Cys127Ala mutation . Thus, structural information regarding the full-length isozymes will be crucial in elucidating isoselectivity of the QC-xx compounds as well the basis behind the lack of selectivity for QC-308 and QC-65, as opposed to QC-57.
The binding of QC-308 to hHO-1 reveals a novel “double-clamp” binding mode. The presence of a secondary hydrophobic pocket provides an additional site of stabilization for the second phenyl group in this QC-analogue which may account for the ∼15-fold increase in potency for this inhibitor. This information may be utilized as a basis to modify isozyme-selective inhibitors to increase potency while maintaining isoselectivity. It is clear, however, that structural information regarding the full-length isozymes will be crucial in elucidating isoselectivity of the QC-xx compounds.
Materials and Methods
All animals were cared for in accordance with the principles and guidelines of the Canadian Council on Animal Care, and experimental protocols were approved by the Queen's University Animal Care Committee.
Synthesis of QC-308
Flashcolumn chromatography was performed on Silicycle silica gel (230–400 mesh, 60 Å). Analytical thin-layer chromatography was performed on glass-backed pre-coated Silica Gel 60 F254 plates (Silicycle), and the compounds were visualized by UV illumination (254 nm). Melting points were measured on a Mel-Temp II apparatus and are uncorrected. 1H and 13C NMR spectra were recorded on a Bruker Avance 400 spectrometer in CDCl3 or CD3OD. The chemical shifts are reported in δ (ppm) relative to tetramethylsilane . The compounds synthesized were deemed >95% pure by 1H NMR analysis. High-resolution ESI mass spectra were recorded on an Applied Biosystems/MDS Sciex QSTAR XL mass spectrometer with an Agilent HP1100 Cap-LC system. Samples were run in 50% aqueous MeOH at a flow rate of 6 µL/min. High-resolution EI mass spectra were recorded on a Waters/Micromass GC-TOF instrument.
Preparation of 1-bromo-4,4-diphenyl-2-butanone.
(4,4-Diphenyl-2-butanone was obtained from Alfa Aesar, Ward Hill, MA, USA.) Under an atmosphere of nitrogen, 4,4-diphenyl-2-butanone (1248 mg, 5.56 mmol, 1 equiv) was dissolved in methanol (10 mL) and a solution of bromine (0.29 mL, 889 mg, 5.56 mmol, 1 equiv) in methanol (7 mL) was added dropwise at RT. The mixture was stirred at RT for 6 h, an aqueous solution of sodium thiosulfate (0.3 M, 10 mL) was added, and the mixture concentrated. To the residue was added brine, and the mixture extracted with ethyl acetate (3×). The combined organic extracts were washed with brine (2×), dried over sodium sulfate, then concentrated. High-vacuum drying left the crude product (1745 mg) as a brown oil; 1H NMR (400 MHz, CDCl3): δ 3.43 (d, J = 7.6 Hz, 2H), 3.75 (s, 2H), 4.63 (s, 1H), in addition to signals attributed to starting material and the 3-bromo isomer; 13C NMR (100 MHz, CDCl3): δ 34.8, 46.0, 46.3, 126.8, 127.8, 128.8, 143.4, 200.3; HRMS (EI) [M]+ Calculated for C16H15BrO: 302.0306. Found: 302.0286.
1-(1H-Imidazol-1-yl)-4,4-diphenyl-2-butanone hydrochloride (QC-308).
Under an atmosphere of nitrogen, a sample of the crude 1-bromo-4,4-diphenyl-2-butanone (836 mg, 2.76 mmol, 1 equiv) was dissolved in N,N-dimethylformamide (11 mL) and to this solution was added imidazole (752 mg, 11.05 mmol, 4 equiv) at RT. The mixture was stirred at 80°C for 24 h, then cooled to RT. Water was added and the mixture extracted with ethyl acetate. The organic extract was washed sequentially with a solution of sodium bicarbonate in brine (3×), and brine, dried over sodium sulfate, then concentrated. The residue was purified by flash column chromatography on silica gel (ethyl acetate as eluent, product Rf ∼0.2) to give the free base (144 mg, 0.50 mmol, 18%). To a solution of the free base in warm 2-propanol (2 mL) was added a solution of 37% aqueous HCl (60 mg, 0.61 mmol, 1.2 equiv) in 2-propanol (2 mL). The mixture was concentrated and dried under high vacuum, leaving the product (151 mg, 0.46 mmol, 17%) as a beige solid; mp 218–220°C; 1H NMR (400 MHz, CD3OD): δ 3.48 (d, J = 7.6 Hz, 2H), 4.61 (t, J = 7.4 Hz, 1H), 5.27 (s, 2H), 7.16–7.20 (m, 2H), 7.24–7.34 (m, 9H), 7.52 (s, 1H), 8.75 (s, 1H); 13C NMR (100 MHz, CD3OD): δ 46.5, 46.9, 58.3, 120.5, 124.5, 127.6, 128.8, 129.7, 137.6, 145.1, 201.1; HRMS (ESI) [M-Cl]+ Calculated for C19H19N2O: 291.1497. Found: 291.1490.
HO Activity Assay.
HO activity in rat spleen and microsomal fractions was determined by quantifying the CO formed from the degradation of methemalbumin (heme complexed with albumin) ,  as described previously .
Expression and Purification of hHO-1 and hHO-2.
A truncated, soluble version of hHO-1 containing 233 amino acids (hHO1-t233) was previously utilized successfully to solve the high-resolution crystal structure of native hHO-1 – as well as hHO-1 in complex with imidazole-based inhibitors , , , . The hHO1-t233/pBAce expression plasmid was a generous gift from Dr. Ortiz de Montellano (University of San Francisco). Bacterial expression and purification of hHO-1 from DH5α cells, and subsequent heme conjugation, were performed as described previously , based on published protocols.
A truncated, soluble version of hHO-2 containing 264 amino acids was utilized for comparison studies with hHO1-t233. The hHO-2(1-264)/pET28a expression plasmid was a generous gift from Dr. Stephen Ragsdale (University of Michigan). The expressed protein contained an N-terminal histidine tag to allow purification by metal chelation. Briefly, BL21 (DE3) cells, transformed with the hHO-2(1–264)/pET28a plasmid, were grown in 1 L of LB supplemented with 30 µg/mL of kanamycin at 37°C following inoculation from a miniculture. After reaching an OD600 of ∼0.8, protein expression was induced with 1 mM IPTG in the presence of 50 mg 5-aminolevulinic acid hydrochloride (Sigma) (the latter was later deemed unnecessary). Cells were allowed to grow for a further 3–4 hours at 37°C before harvesting by centrifugation. Cell pellets were stored at −80°C until ready for use. Pellets were subsequently thawed on ice, resuspended in lysis buffer [50 mM NaH2PO4 (pH 8.0), 300 mM NaCl, 3 mM imidazole, lysozyme (0.5 mg/mL; BioShop), DNAseI (5 units/mL; Fermentas) EDTA-free protease inhibitor cocktail (1 tablet/50 mL; Roche)] and incubated on ice for 30 min with rocking, followed by sonication. Lysates were cleared by centrifugation and the supernatant incubated with Ni-NTA agarose resin, which had been equilibrated with 50 mM NaH2PO4 containing 300 mM KCl, for 1 hour at 4°C. Subsequently, the resin was poured into a column for purification. Unbound protein was washed with buffer containing 15 mM imidazole, followed by a gradient from 20–200 mM imidazole; the protein eluted with 500 mM imidazole. Protein-containing fractions were visualized by 12% SDS-PAGE, pooled and dialyzed against 50 mM Tris pH 7.5, 100 mM KCl. The apo protein concentration was determined using the Bradford method (BioRad). A stock hemin (Fluka) solution (8 mg/mL) was prepared by dissolving 12 mg into 170 µL of 10% ethanolamine, followed by dilution into 50 mM Tris (pH 7.5), 100 mM KCl. The hemin solution was slowly added to the apo hHO-2 protein preparation to a final molar ratio of 2∶1, rocked at 4°C for 20–30 min, and stored at −20°C. Subsequently, excess heme was removed by passage over a PD-10 size-exclusion column (Amersham Biosciences) that had been equilibrated with 50 mM Tris (pH 7.5), 100 mM KCl. Protein concentration was determined by absorbance (ε405) 171.4±1.2 mM−1 cm−1) . Purity was assessed by measurement of the Rz ratio (A405/A280>2.1) and by SDS-PAGE analysis.
Inhibitor binding and heme degradation assays were performed on recombinant hHO proteins by measuring absorbance using a microplate spectrophotometer (Bio-Tek Instruments) as described previously , . Briefly, inhibitor binding was determined by incubation of 10 µM heme-conjugated hHO-1 with increasing concentrations of QC-308 (0–25 µM) in 20 mM potassium phosphate buffer. Spectra were recorded between 300 and 700 nm at 1 nm intervals. After the determination of the Soret peak position at each inhibitor concentration, heme degradation was initiated by the addition of l-ascorbic acid to a final concentration of 1 mM and followed by measuring absorbance at the wavelength corresponding to the respective Soret peaks at 1 min intervals for a period of 90 min. Initial rates of decrease of the Soret band were calculated at the wavelengths of the respective Soret peaks. Spectra were measured from 300 to 700 nm following the reaction period.
Crystallization was performed using sitting-drop vapour diffusion as described previously , based on published protocols –. The crystallization conditions consisted 100 mM HEPES (pH 7.5), 2.2 M ammonium sulfate 0.95% 1,6-hexanediol. The heme–hHO-1 complex (412 µM in 20 mM potassium phosphate) was mixed with QC-308 at a molar ratio of 1∶3 and binding was confirmed using spectral analysis to confirm a shift in the native Soret peak (from 404 nm to 410 nm) prior to setting up crystallization plates, as described previously . Crystallization drops consisted of 2 µL of the protein-inhibitor solution mixed with 2 µL of the reservoir solution.
Data Collection and Structure Determination.
X-ray diffraction measurements were performed at the Advanced Photon Source (APS) at Argonne National Laboratory (Chicago, Illinois) at the 23-ID-D beamline. For data collection, a cryoprotectant comprising 100 mM HEPES pH 7.5, 2.32 M ammonium sulfate, 1% 1,6-hexanediol, 20% glycerol was used. Crystals were subsequently flash-cooled in a stream of N2 at 100 K. Data were collected for 360° with an oscillation of 0.5° and 240 frames processed using XDS for structure determination . The structure of the protein-inhibitor complex was solved by molecular replacement (MR) using Phaser  in the CCP4 suite . The heme-hHO-1 complex (PDB code 1N3U, Chain A) was the initial probe. An initial template of QC-308 was generated using the Dundee PRODRG2 server , and the library files created using Monomer Sketcher in the CCP4 suite. Following initial refinement with Refmac in the CCP4 suite, the structure of the inhibitor was inserted and subsequently refined using iterative cycles of Coot  and Refmac5  in the CCP4 suite. Standard parameters for heme were used as described in its library entry in the program during refinement, with no additional restraints on planarity, bond lengths, and bond angles. Structural alignments were performed using Superpose  in CCP4. Contacts were calculated using Contacts in CCP4. Ramachandran plots were determined using PROCHECK in CCP4 . Electrostatic surface potentials were calculated and all images were prepared using PyMOL .
Structure of heme-conjugated hHO-1 in complex with 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone (QC-308) at 2.85 Å resolution. Ribbon diagram of the two molecules in the asymmetric unit. Heme (orange) and QC-308 (yellow) are depicted as stick models, as is the molecule of 1,6-hexanediol (magenta). Image was created in PyMol .
Structural alignment. Top: Plot of the RMS deviation of main chain backbone atoms of the A and B molecules of hHO-1 in complex with QC-308. Bottom: Alignment of the B molecule with the native holoenzyme (PDB code 1N45, Chain-A), hHO-1 in complex with QC-82 (PDB code 3CZY, Chain-A), and hHO-1 in complex with QC-80 (PDB code 3HOK, Chain B). Structural alignments were performed using “Superpose” in CCP4 , .
Contacts between heme-conjugated hHO-1 and 1-(1H-imidazol-1-yl)-4,4-diphenyl-2-butanone. Residues ≤4.0 Å apart are listed. Atom names of inhibitor refer to nomenclature in the PDB. Distances were calculated using “Contacts” in CCP4 .
The authors would like to thank Dr. Paul Ortiz de Montellano and Dr. John Evans (both from the University of San Francisco) for the generous gift of the hHO1-t233 plasmid and advice regarding its expression and purification, as well as Dr. Stephen Ragsdale and Dr. Li Yi (both of the University of Michigan) for the generous gift of the N-His tagged hHO-2(1–264) plasmid and advice regarding its expression and purification. We are grateful to Dr. Qilu Ye and Dr. Frédérick Faucher for technical advice in the structural determination. We would also like to thank the staff at the Advanced Photon Source (APS) at Argonne National Laboratory (Chicago, Illinois) for their help in X-ray data collection.
Conceived and designed the experiments: MNR JZV DV WAS KN ZJ. Performed the experiments: MNR JZV DV WL. Analyzed the data: MNR JZV DV WL. Contributed reagents/materials/analysis tools: WAS KN ZJ. Wrote the paper: MNR.
- 1. Tenhunen R, Marver HS, Schmid R (1969) Microsomal heme oxygenase. Characterization of the enzyme. J Biol Chem 244: 6388–6394.
Vreman HJ, Wong RJ, Stevenson DK (2002) Carbon Monoxide and Cardiovascular Function. Boca Raton, London, New York, Washington: CRC Press.
- 3. Maines MD (1997) The heme oxygenase system: a regulator of second messenger gases. Annu Rev Pharmacol Toxicol 37: 517–554.
- 4. Hayashi S, Omata Y, Sakamoto H, Higashimoto Y, Hara T, et al. (2004) Characterization of rat heme oxygenase-3 gene. Implication of processed pseudogenes derived from heme oxygenase-2 gene. Gene 336: 241–250.
- 5. Ryter SW, Alam J, Choi AM (2006) Heme oxygenase-1/carbon monoxide: from basic science to therapeutic applications. Physiol Rev 86: 583–650.
- 6. Lee TS, Chau LY (2002) Heme oxygenase-1 mediates the anti-inflammatory effect of interleukin-10 in mice. Nat Med 8: 240–246.
- 7. Lee TS, Tsai HL, Chau LY (2003) Induction of heme oxygenase-1 expression in murine macrophages is essential for the anti-inflammatory effect of low dose 15-deoxy-Delta 12,14-prostaglandin J2. J Biol Chem 278: 19325–19330.
- 8. Imuta N, Hori O, Kitao Y, Tabata Y, Yoshimoto T, et al. (2007) Hypoxia-mediated induction of heme oxygenase type I and carbon monoxide release from astrocytes protects nearby cerebral neurons from hypoxia-mediated apoptosis. Antioxid Redox Signal 9: 543–552.
- 9. Farrera JA, Jauma A, Ribo JM, Peire MA, Parellada PP, et al. (1994) The antioxidant role of bile pigments evaluated by chemical tests. Bioorg Med Chem 2: 181–185.
- 10. Asad SF, Singh S, Ahmad A, Khan NU, Hadi SM (2001) Prooxidant and antioxidant activities of bilirubin and its metabolic precursor biliverdin: a structure-activity study. Chem Biol Interact 137: 59–74. S0009279701002095 [pii].
- 11. Minetti M, Mallozzi C, Di Stasi AM, Pietraforte D (1998) Bilirubin is an effective antioxidant of peroxynitrite-mediated protein oxidation in human blood plasma. Arch Biochem Biophys 352: 165–174. S0003-9861(98)90584-7 [pii];10.1006/abbi.1998.0584 [doi].
- 12. Gozzelino R, Jeney V, Soares MP (2010) Mechanisms of cell protection by heme oxygenase-1. Annu Rev Pharmacol Toxicol 50: 323–354. 10.1146/annurev.pharmtox.010909.105600 [doi].
- 13. Maines MD, Abrahamsson PA (1996) Expression of heme oxygenase-1 (HSP32) in human prostate: normal, hyperplastic, and tumor tissue distribution. Urology 47: 727–733. S0090-4295(96)00010-6 [pii].
- 14. Berberat PO, Dambrauskas Z, Gulbinas A, Giese T, Giese N, et al. (2005) Inhibition of heme oxygenase-1 increases responsiveness of pancreatic cancer cells to anticancer treatment. Clin Cancer Res 11: 3790–3798. 11/10/3790 [pii];10.1158/1078-0432.CCR-04-2159 [doi].
- 15. Nowis D, Legat M, Grzela T, Niderla J, Wilczek E, et al. (2006) Heme oxygenase-1 protects tumor cells against photodynamic therapy-mediated cytotoxicity. Oncogene 25: 3365–3374. 1209378 [pii];10.1038/sj.onc.1209378 [doi].
- 16. Luo D, Vincent SR (1994) Metalloporphyrins inhibit nitric oxide-dependent cGMP formation in vivo. Eur J Pharmacol 267: 263–267.
- 17. Meffert MK, Haley JE, Schuman EM, Schulman H, Madison DV (1994) Inhibition of hippocampal heme oxygenase, nitric oxide synthase, and long-term potentiation by metalloporphyrins. Neuron 13: 1225–1233.
- 18. Grundemar L, Ny L (1997) Pitfalls using metalloporphyrins in carbon monoxide research. Trends Pharmacol Sci 18: 193–195.
- 19. Appleton SD, Chretien ML, McLaughlin BE, Vreman HJ, Stevenson DK, et al. (1999) Selective inhibition of heme oxygenase, without inhibition of nitric oxide synthase or soluble guanylyl cyclase, by metalloporphyrins at low concentrations. Drug Metab Dispos 27: 1214–1219.
- 20. DeNagel DC, Verity AN, Madden FE, Yang CO, Sangameswaran L, et al. (1998) Identification of non-porphyrin inhibitors of heme oxygenase-1. Neuroscience 24: 2058.
- 21. Kinobe RT, Vlahakis JZ, Vreman HJ, Stevenson DK, Brien JF, et al. (2006) Selectivity of imidazole-dioxolane compounds for in vitro inhibition of microsomal haem oxygenase isoforms. Br J Pharmacol 147: 307–315.
- 22. Hum M, McLaughlin BE, Roman G, Vlahakis JZ, Szarek WA, et al. (2010) The effects of azole-based heme oxygenase inhibitors on rat cytochromes P450 2E1 and 3A1/2 and human cytochromes P450 3A4 and 2D6. J Pharmacol Exp Ther 334: 981–987. jpet.110.168492 [pii];10.1124/jpet.110.168492 [doi].
- 23. Roman G, Riley JG, Vlahakis JZ, Kinobe RT, Brien JF, et al. (2007) Heme oxygenase inhibition by 2-oxy-substituted 1-(1H-imidazol-1-yl)-4-phenylbutanes: effect of halogen substitution in the phenyl ring. Bioorg Med Chem 15: 3225–3234.
- 24. Vlahakis JZ, Kinobe RT, Bowers RJ, Brien JF, Nakatsu K, et al. (2006) Imidazole-dioxolane compounds as isozyme-selective heme oxygenase inhibitors. J Med Chem 49: 4437–4441.
- 25. Vlahakis JZ, Kinobe RT, Bowers RJ, Brien JF, Nakatsu K, et al. (2005) Synthesis and evaluation of azalanstat analogues as heme oxygenase inhibitors. Bioorg Med Chem Lett 15: 1457–1461.
- 26. Vlahakis JZ, Hum M, Rahman MN, Jia Z, Nakatsu K, et al. (2009) Synthesis and evaluation of imidazole-dioxolane compounds as selective heme oxygenase inhibitors: effect of substituents at the 4-position of the dioxolane ring. Bioorg Med Chem 17: 2461–2475.
- 27. Roman G, Rahman MN, Vukomanovic D, Jia Z, Nakatsu K, et al. (2010) Heme oxygenase inhibition by 2-oxy-substituted 1-azolyl-4-phenylbutanes: effect of variation of the azole moiety. X-ray crystal structure of human heme oxygenase-1 in complex with 4-phenyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone. Chem Biol Drug Des 75: 68–90. JPP909 [pii];10.1111/j.1747-0285.2009.00909.x [doi].
- 28. Di FL, Totani L, Dovizio M, Piccoli A, Di FA, et al. (2009) Induction of prostacyclin by steady laminar shear stress suppresses tumor necrosis factor-alpha biosynthesis via heme oxygenase-1 in human endothelial cells. Circ Res 104: 506–513. CIRCRESAHA.108.191114 [pii];10.1161/CIRCRESAHA.108.191114 [doi].
- 29. Rahman MN, Vlahakis JZ, Roman G, Vukomanovic D, Szarek WA, et al. (2010) Structural characterization of human heme oxygenase-1 in complex with azole-based inhibitors. J Inorg Biochem 104: 324–330. S0162-0134(09)00259-1 [pii];10.1016/j.jinorgbio.2009.10.011 [doi].
- 30. Rahman MN, Vlahakis JZ, Szarek WA, Nakatsu K, Jia Z (2008) X-ray crystal structure of human heme oxygenase-1 in complex with 1-(adamantan-1-yl)-2-(1H-imidazol-1-yl)ethanone: a common binding mode for imidazole-based heme oxygenase-1 inhibitors. J Med Chem 51: 5943–5952.
- 31. Rahman MN, Vlahakis JZ, Vukomanovic D, Szarek WA, Nakatsu K, et al. (2009) X-ray crystal structure of human heme oxygenase-1 with (2R,4S)-2-[2-(4-chlorophenyl)ethyl]-2-[(1H-imidazol-1-yl)methyl]-4[((5-tri fluoromethylpyridin-2-yl)thio)methyl]-1,3-dioxolane: a novel, inducible binding mode. J Med Chem 52: 4946–4950.
- 32. Sugishima M, Higashimoto Y, Oishi T, Takahashi H, Sakamoto H, et al. (2007) X-ray crystallographic and biochemical characterization of the inhibitory action of an imidazole-dioxolane compound on heme oxygenase. Biochemistry 46: 1860–1867.
- 33. Vlahakis JZ, Rahman MN, Roman G, Jia Z, Nakatsu K, et al. (2010) Rapid, convenient method for screening imidazole-containing compounds for heme oxygenase inhibition. J Pharmacol Toxicol Methods. S1056–8719(10)00088-2 [pii];10.1016/j.vascn.2010.05.015 [doi].
- 34. Vukomanovic D, McLaughlin B, Rahman MN, Vlahakis JZ, Roman G, et al. (2010) Recombinant truncated and microsomal heme oxygenase-1 and -2: differential sensitivity to inhibitors. Can J Physiol Pharmacol 88: 480–486. y10-004 [pii];10.1139/y10-004 [doi].
- 35. Lad L, Schuller DJ, Shimizu H, Friedman J, Li H, et al. (2003) Comparison of the heme-free and -bound crystal structures of human heme oxygenase-1. J Biol Chem 278: 7834–7843.
- 36. Schuller DJ, Wilks A, Ortiz de Montellano PR, Poulos TL (1999) Crystal structure of human heme oxygenase-1. Nat Struct Biol 6: 860–867.
- 37. Schuller DJ, Wilks A, Ortiz de Montellano PR, Poulos TL (1998) Crystallization of recombinant human heme oxygenase-1. Protein Sci 7: 1836–1838.
- 38. Bianchetti CM, Yi L, Ragsdale SW, Phillips GN Jr (2007) Comparison of apo- and heme-bound crystal structures of a truncated human heme oxygenase-2. J Biol Chem 282: 37624–37631.
- 39. Huber WJ III, Backes WL (2007) Expression and characterization of full-length human heme oxygenase-1: the presence of intact membrane-binding region leads to increased binding affinity for NADPH cytochrome P450 reductase. Biochemistry 46: 12212–12219.
- 40. Huber WJ III, Marohnic CC, Peters M, Alam J, Reed JR, et al. (2009) Measurement of membrane-bound human heme oxygenase-1 activity using a chemically defined assay system. Drug Metab Dispos 37: 857–864.
- 41. Huber WJ III, Scruggs BA, Backes WL (2009) C-Terminal membrane spanning region of human heme oxygenase-1 mediates a time-dependent complex formation with cytochrome P450 reductase. Biochemistry 48: 190–197.
- 42. Lin Q, Weis S, Yang G, Weng YH, Helston R, et al. (2007) Heme oxygenase-1 protein localizes to the nucleus and activates transcription factors important in oxidative stress. J Biol Chem 282: 20621–20633. M607954200 [pii];10.1074/jbc.M607954200 [doi].
- 43. Huang TJ, McCoubrey WK Jr, Maines MD (2001) Heme oxygenase-2 interaction with metalloporphyrins: function of heme regulatory motifs. Antioxid Redox Signal 3: 685–696. 10.1089/15230860152543023 [doi].
- 44. McCoubrey WK Jr, Huang TJ, Maines MD (1997) Heme oxygenase-2 is a hemoprotein and binds heme through heme regulatory motifs that are not involved in heme catalysis. J Biol Chem 272: 12568–12574.
- 45. Qi Z, Hamza I, O'Brian MR (1999) Heme is an effector molecule for iron-dependent degradation of the bacterial iron response regulator (Irr) protein. Proc Natl Acad Sci U S A 96: 13056–13061.
- 46. Yi L, Ragsdale SW (2007) Evidence that the heme regulatory motifs in heme oxygenase-2 serve as a thiol/disulfide redox switch regulating heme binding. J Biol Chem 282: 21056–21067.
- 47. Yi L, Jenkins PM, Leichert LI, Jakob U, Martens JR, et al. (2009) Heme regulatory motifs in heme oxygenase-2 form a thiol/disulfide redox switch that responds to the cellular redox state. J Biol Chem 284: 20556–20561. M109.015651 [pii];10.1074/jbc.M109.015651 [doi].
- 48. Gardner JD, Yi L, Ragsdale SW, Brunold TC (2010) Spectroscopic insights into axial ligation and active-site H-bonding in substrate-bound human heme oxygenase-2. J Biol Inorg Chem 15: 1117–1127. 10.1007/s00775-010-0672-8 [doi].
- 49. Gottlieb HE, Kotlyar V, Nudelman A (1997) NMR Chemical Shifts of Common Laboratory Solvents as Trace Impurities. J Org Chem 62: 7512–7515.
- 50. Vreman HJ, Stevenson DK (1988) Heme oxygenase activity as measured by carbon monoxide production. Anal Biochem 168: 31–38.
- 51. Cook MN, Nakatsu K, Marks GS, McLaughlin BE, Vreman HJ, et al. (1995) Heme oxygenase activity in the adult rat aorta and liver as measured by carbon monoxide formation. Can J Physiol Pharmacol 73: 515–518.
- 52. Kabsch W (2010) XDS. Acta Crystallogr D Biol Crystallogr 66: 125–132. S0907444909047337 [pii];10.1107/S0907444909047337 [doi].
- 53. McCoy AJ, Grosse-Kunstleve RW, Adams PD, Winn MD, Storoni LC, et al. (2007) Phaser crystallographic software. J Appl Crystallogr 40: 658–674. 10.1107/S0021889807021206 [doi].
- 54. Collaborative Computational Project N4 (1994) The CCP4 suite: programs for protein crystallography. Acta Crystallogr D Biol Crystallogr 50: 760–763.
- 55. Schuttelkopf AW, van Aalten DM (2004) PRODRG: a tool for high-throughput crystallography of protein-ligand complexes. Acta Crystallogr D Biol Crystallogr 60: 1355–1363.
- 56. Emsley P, Cowtan K (2004) Coot: model-building tools for molecular graphics. Acta Crystallogr D Biol Crystallogr 60: 2126–2132.
- 57. Murshudov GN, Vagin AA, Dodson EJ (1997) Refinement of macromolecular structures by the maximum-likelihood method. Acta Crystallogr D Biol Crystallogr 53: 240–255. 10.1107/S0907444996012255 [doi];S0907444996012255 [pii].
- 58. Krissinel E, Henrick K (2004) Secondary-structure matching (SSM), a new tool for fast protein structure alignment in three dimensions. Acta Crystallogr D Biol Crystallogr 60: 2256–2268. S0907444904026460 [pii];10.1107/S0907444904026460 [doi].
- 59. Laskowski RA, MacArthur MW, Moss DS, Thornton JM (1993) PROCHECK: a program to check the stereochemical quality of protein structures. J Appl Crystallogr 26: 283–291.
DeLano WL (2002) The PyMOL Molecular Graphics System. version Palo Alto, CA, USA: DeLano Scientific.