Skip to main content
Browse Subject Areas

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Common Functional Correlates of Head-Strike Behavior in the Pachycephalosaur Stegoceras validum (Ornithischia, Dinosauria) and Combative Artiodactyls



Pachycephalosaurs were bipedal herbivorous dinosaurs with bony domes on their heads, suggestive of head-butting as seen in bighorn sheep and musk oxen. Previous biomechanical studies indicate potential for pachycephalosaur head-butting, but bone histology appears to contradict the behavior in young and old individuals. Comparing pachycephalosaurs with fighting artiodactyls tests for common correlates of head-butting in their cranial structure and mechanics.

Methods/Principal Findings

Computed tomographic (CT) scans and physical sectioning revealed internal cranial structure of ten artiodactyls and pachycephalosaurs Stegoceras validum and Prenocephale prenes. Finite element analyses (FEA), incorporating bone and keratin tissue types, determined cranial stress and strain from simulated head impacts. Recursive partition analysis quantified strengths of correlation between functional morphology and actual or hypothesized behavior. Strong head-strike correlates include a dome-like cephalic morphology, neurovascular canals exiting onto the cranium surface, large neck muscle attachments, and dense cortical bone above a sparse cancellous layer in line with the force of impact. The head-butting duiker Cephalophus leucogaster is the closest morphological analog to Stegoceras, with a smaller yet similarly rounded dome. Crania of the duiker, pachycephalosaurs, and bighorn sheep Ovis canadensis share stratification of thick cortical and cancellous layers. Stegoceras, Cephalophus, and musk ox crania experience lower stress and higher safety factors for a given impact force than giraffe, pronghorn, or the non-combative llama.


Anatomy, biomechanics, and statistical correlation suggest that some pachycephalosaurs were as competent at head-to-head impacts as extant analogs displaying such combat. Large-scale comparisons and recursive partitioning can greatly refine inference of behavioral capability for fossil animals.


Many animals strike with their heads at conspecifics, in ritualized flank-butting, head-to-head shoving matches and head-butting combat. Correlates cited for head-butting in modern ungulates include cranial sinuses [1] that form strut-perfused osseous domes above the brain, and secondary correlates include neurovascular canals supplying a protective keratin covering on the skull surface [2]. In addition to colliding with their horns (which spreads the impact in dual horn-horn contacts [3]), bighorn sheep (Ovis canadensis) vigorously impact each other on the apices of their heads between the horn cores [4]. Duikers (Cephalophinae) are small bovids with thick, rounded frontals, which they use in intraspecific head-to-head impacts [5], [6]. Similarly dome-shaped crania of pachycephalosaurian dinosaurs have been hypothesized as appropriate for head- or flank-butting, but internal histology appears to contradict such capability in young and old individuals [7] unless a thick keratinous covering protected the osseous dome [8].

Dome function in pachycephalosaurs has been controversial, with trabeculae within the dome interpreted as developmental traces inconsistent with head-butting [7], or as structures that would halt or absorb strain during collisions [9]. A highly vascular cancellous zone [7] undoubtedly sped the development and growth of pachycephalosaur domes. However, quantitative tests have supported a complementary energy-absorbing role for trabeculae. Farke [1] determined that trabeculae within cranial sinuses of goats would better dissipate strain than sinuses alone, similar to what Snively and Cox [8] found for cancellous regions of some pachycephalosaur domes. Maity and Tekalur [10] corroborated this phenomenon in bighorn sheep, despite a different loading pattern.

We use CT (computed tomographic) scanning and finite element analysis (FEA) to compare structural capabilities of crania in head-striking artiodactyls (the duiker Cephalophus leucogaster, musk ox Ovibos moschatus and giraffe Giraffa camelopardalis [6], [10], [11], [12], [13]) and a possibly analogous combatant, the pachycephalosaur Stegoceras validum. As controls we examine specimens of other artiodactyls that engage in a spectrum of combative behaviors. Bighorn sheep [Ovis canadensis) butt heads, and regress in horn-horn contact as these ornaments take a greater display function in older rams [4]. Male pronghorn Antilocapra americana collide with cranial ornaments but do not butt heads [14], whereas neither behavior occurs in female elk (wapiti) Cervus canadensis, peccary Tayassu tajacu and llama (Lama glama). Expanding on previous studies of pachycephalosaur crania, we perform 3D finite element analysis (FEA) of simulated head impacts with models based on CT scans.

These methods test three main hypotheses and predictions. First, we test the prediction that like some pachycephalosaurs [8], head-butting artiodactyls will have a deep layer of cancellous bone beneath dense compact bone. Second, we extend Farke's hypothesis for goats ([1], [5], and references therein), that frontal sinuses with trabeculae would dissipate strain, to other head-butting bovids. The morphology of soft tissue covering pachycephalosaur domes is unknown, and we test the effects of different-shaped keratin pads by applying concentrated and broad forces to the dome. Finally, we examine whether Stegoceras, musk ox and duiker cephalic structures would experience similar stress levels under similar impact loads.

Structural terminology and interpretation of finite element results

In the following discussions, ultimate stress refers to the material's strength (breaking point), and yield stress is that of permanent deformation (beginning the inelastic portion of the stress-strain curve). Ultimate stress is usually higher than yield stress, and results in full breakage or crushing of a structure or its constituents. A brittle material, with little porosity to dissipate energy of cracking, often has similar strength and yield stresses. Bone has both a brittle mineralized component and ductile, flexible collagen, whereas keratin is highly ductile. Safety factor refers to ultimate or yield stress (or strain) divided by the experienced value.

When FEA reveals safety factors under given loads, we can predict and compare forces necessary to break the structures. A cranial element with a higher safety factor can experience higher magnitudes of impact force before it breaks, which would potentially damage critical soft tissues. (A classic example is a blow to the squamous portion of the temporal in humans, rupturing the middle meningeal artery and causing epidural hematoma.) The strain threshold of fatal soft tissue injury dictates the maximum force of a strike, which can be higher if extensive stiff and compliant hard tissues diminish impact stress and absorb strain energy. The current comparison quantifies relative capability for head-strikes of hard tissues of the head, a major step for circumscribing behavioral hypotheses. In the absence of trace evidence, inference of actual behavior of fossil animals requires novel phylogenetic and statistical methods.

Correlations of functional morphology and behavior

A potentially useful method for inferring behavior is recursive partition analysis (RPA), an algorithm used to guide diagnoses of illness based on correlations between an affliction and its symptoms. Analogously to a patient with an unknown illness and presented symptoms, an extinct animal can be diagnosed for an unknown behavior based on morphological traits. Correlation strengths for animals with known behavior can test for likelihood of the behavior in an extinct taxon. Hieronymous and colleagues [2] applied RPA to examine strength of correlation between types of soft tissue and their osteological correlates. We use RPA to examine how well osteology, head shape, and FEA results correlate with behaviors in our examined taxa and several others (Table 2).

We also introduce an extension of RPA called correlate disruption, which examines how strongly adult Stegoceras morphology would suit it for combat relative to extant head-butting taxa. For an extant animal with strong linkages between structure and behavior, the strengths of these correlations will decrease when an incorrect behavior is assigned in RPA. We can test for a hypothetical behavior in an extinct animal by varying its behavioral assignment. If the alternate hypothesis changes correlation strength by the same amount as for the mis-assigned extant animal, the extinct animal can be inferred as an equivalently probable candidate for the behavior.


Bone densities of Stegoceras and artiodactyl crania

Specimen numbers are listed in Table 1. Figures 1, 2, 3, 4, 5, 6, 7, 8, 9 depict external anatomy and densities from CT scans of Stegoceras, Cephalophus, and juvenile and adult Ovibos. Superficially the dome of Stegoceras is highly and uniformly dense (Figures 1), although CT beam hardening appears to increase Hounsfield values above those of the original bone (Figure 2). Densities of bone of the palate and occiput are substantially lower than those of the bone in the dome, supraorbital bones, and posterior ornaments (Figure 1 B and F). The external surface of the Cepahlophus dome (Figure 3) is denser than the horn-bearing portion of the frontals and the dorsal surface of the parietals, but not notably denser than the nasals or lateral portion of the parietals. The proximal horn cores of Cephalophus are much denser than their keratin sheaths. In contrast, horn sheaths in Ovibos are dense compared with cranial cancellous bone (Figures 7, 8, 9). The keratin sheaths of the adult Ovibos are denser and larger than in the juvenile (Figures 7 and 9), and bone densities overall are greater. The median visualized density for the juvenile Ovibos had to be lowered to easily depict keratin versus bone; hence the tooth enamel density is clipped and the teeth appear white (Figure 9).

Figure 1. Relative surface densities of cranial bone in Stegoceras validum (UA 2).

External densities of the cranium of Stegoceras validum, in dorsal (A), ventral (B), lateral (C, D), anterior (E) and posterior (F) views. Note high densities of cranial ornamentation, and numerous neurovascular canals (correlates of a keratinous pad) exiting onto the cranial roof.

Figure 2. Internal densities of bone in Stegoceras validum (UA 2).

Transverse CT sections from anterior (A) to posterior (F) through the cranium of Stegoceras validum (UA 2) seen in anterior oblique view. Inset CT reconstruction in lateral view (top) depicts section positions. Density and thickness of cortical bone increase towards the apex of the dome from the periphery, anteroposteriorly (B–D) and medially (C, D). Trabeculae radiate roughly perpencidular to the dome's outer surface, evident in the low-density (blue) region posterior to the orbit (B–E). Note that density of superficial bone may be inflated by beam hardening, but a dense, deep compact layer is definitively present. Dense compact bone (Hounsfield values of approximately 2000) surrounds presumed vascular traces, forming tubes that empty onto the dome surface; three of these are visible in D and E. These tubular structures recall struts within artiodactyl cranial sinuses.

Figure 3. Surface densities of cranial bone in the duiker Cephalophus leucogaster (AMNH 52802).

External cranial densities of the white-bellied duiker, in dorsal, ventral (A, B), right and left lateral (C, D), and anterior and posterior (E, F) views. Duikers collide with a rounded dome formed by thick frontals (the frontals are not fused, as in Stegoceras). The color scale is in Hounsfield units, centered at 1334 (water = 0). The horn sheaths are rendered as slightly transparent, to emphasize high densities of the horn cores; compare with the musk oxen (Figures 4, 5, 6).

Figure 4. Densities of the frontal dome of Cephalophus leucogaster (AMNH 52802) in transverse section.

A section through the posterior portion of the orbit and anterior region of the endocranial cavity (A, B) shows dense and diffuse trabecular bone (C) between bands of compact bone. Regions of compact bone are thinner than in Stegoceras, and larger trabeculae appear more robust (compare with Figure 2). The density color scale is the same as in Figure 3.

Figure 5. Comparison of sagittal-section densities in crania of Stegoceras validum (UA 2) and Cephalophus leucogaster (AMNH 52802).

A, B, C. Sagittal sections through the cranium of Stegoceras validum, at positions shown in the dorsal view (top). D, E, F. Sections through the cranium of Cephalophus leucogaster, at positions shown in the dorsal inset (top). Note similar stratification of compact and cancellous layers in F, through the middle of the duiker's lobate dome, and B, through the center of the pachycephalosaur's dome. ec = endocranial cavity.

Figure 6. Comparison of dome structure in Stegoceras (UA 2), the duiker Cephalophus (AMNH 52802), and bighorn sheep Ovis canadensis (UCMZ).

Midsagittal sections through the crania of Stegoceras validum, duiker Cephalophus leucogaster, and a bighorn sheep Ovis canadensis reveal similar dome structure. A. In the Stegoceras specimen, compact bone (z1 and z3: zones 1 and 3: [7]) occurs deep and superficial to a cancellous region (z2: zone 2: [7]). Moderately dense compact bone shows as a green band at the base of zone 3 (white line); note cancellous bone (blue) above the line in the anterior portion of this zone. B. Cephalophus. C. Similar stratification is evident in the sectioned Ovis cranium, with nearly identical zones of cancellous and compact bone broken by a ventral sinus.

Figure 7. External cranial bone and horn densities in the adult musk ox (Ovibos moschatus: UCMZ M 1978.1.92).

Densities of the cranium and horn sheaths in adult Ovibos moschatus, in dorsal (A), ventral (B), lateral (C, D), anterior (E) and posterior (F) views. Note bone higher bone densities than in the juvenile specimen (Figure 5), and the expanded keratin pads over the parietals.

Figure 8. Internal densities of horn and bone in adult musk ox (Ovibos moschatus UCMZ M 1978.1.92).

CT sections through the cranium of juvenile Ovibos moschatus. Dorsal and lateral CT renders show section position. A.–C. Right, mid-, and left sagittal sections show thick regions of trabeculae above the endocranial cavity, with a superficial layer of dense cortical bone over the apex of the brain (B). The most extensive cancellous bone occurs beneath the apeces of the horn sheaths, in line with the occipital condyles. A network of struts connects frontal and maxillary sinus regions (A and C). D.–F. Transverse sections from anterior to posterior show decreasing instances of struts and increasing cancellae as the horn sheaths become taller, and dense bone of the skull roof beneath the sheaths. Note the extent of trabecular bone between the sheaths and occipital condyles, in line with forces of head-butting impacts. Abbreviations: ec = endocranial cavity, fs = frontal sinus, ms = maxillary sinus, ps = parietal sinus.

Figure 9. External densities of horn and bone in juvenile musk ox (UCMZ 1979.60).

Densities of the cranium and horn sheaths in juvenile Ovibos moschatus, in dorsal (A), ventral (B), lateral (C, D), anterior (E) and posterior (F) views. Note higher densities anterior to the bases of the horns, and higher density of horn keratin than much of the cranial bone. The horns' keratin has yet to develop into a large pad above the parietals. Enamel densities are high and clipped out using this color scale.

Table 1. Taxa and specimens examined, and forces applied for FEA.

As evident in histological sections through mature pachycephalosaur domes [7], CT sections into the Stegoceras cranium reveal dense inner and outer compact bone and a less dense intermediate region (zones 1, 3 and 2, respectively, identified by Goodwin and Horner [7]). The outer zone of compacta becomes thicker towards the apex of the dome (Figure 2) from all peripheral directions, and most notably posteriorly from the rostrum and medially from just behind the orbits (Figure 2C, D). In the CT sections the outer compact bone appears highly dense, approaching 3,000 Hounsfield units (water = 0; dark red in Figures 2, 5, and 6). Deep attenuation of density indicates that beam hardening inflates apparent density of the superficial dome, although the lack of such a gradient from the palate dorsally suggests that the outer dome did consist of dense compact bone. Lower-density compact bone lines vascular traces that exit onto the dome surface (Figure 2 C–E), differentiating them from surrounding cancellous bone. (These tubular structures do not increase in density superficially, again indicating that high Hounsfield values of the surrounding cortex do not solely reflect beam hardening.) Similarly dense compacta occur just deep to the outer dome, and as two internal bands probably representing earlier stages of dome development (green bands, Figure 2 C and D).

The frontal dome of Cephalophus displays stratification like that of Stegoceras, with a dense compact layer (zone 1) adjacent to the braincase, and cancellous and compact layers superficially (Figures 4 and 5). Inflation of densities from superficial beam hardening is unlikely, because Hounsfield values are similar for the floor and roof of the braincase. Trabecular size and density are more variable in the Cephalophus scan than in Stegoceras (Figures 4, 5, 6). Some Cephalophus trabeculae recall the neurovascular conduits seen in Stegoceras, but form a cancellous latticework of struts rather than traversing the entire dome. The high density of some regions of the Cephalophus dome recalls regression of trabeculae seen in some large adult pachycephalosaurs [7], although the Cephalophus dome lacks their uniformity of compact bone.

Similarly to Cephalophus and Stegoceras, a mid-sagittal cranial section of Ovis canadensis (Figure 6C) shows deep compact, cancellous, and superficial compact zones, but with an additional sinus region (zone 2a: Figure 6C). The deep zone 1 [7] and cancellous zones (2b in Ovis canadensis) are especially similar between the specimens. We predict that more mature specimens of Ovis canadensis will possess a thicker compact zone 3, as seen in this Stegoceras and other pachycephalosaur specimens.

The Ovibos crania display bone density patterns grossly similar to those in Cephalophus and Stegoceras (Figures 7, 8, 9), but with relatively larger cancellous regions. As in Cephalophus the frontals of Ovibos are superficially dense, although no denser than compact bone of the nasals and maxillae. Densities of compact bone are higher in the adult Ovibos (Figures 7 and 8) than in the juvenile (Figure 9). Beneath the apices of the horn sheaths, and in line with the occipital condyles, a superficial layer of dense compact bone overlies a deep and extensive region of cancellous bone contiguous with the endocranial cavity (Figure 8). This internal structure recalls zones 1 and 2 of pachycephalosaur domes [7]. Unlike in pachycephalosaur domes, the bone lining the endocranial cavity is not notably dense, and the superficial compact layer is much thinner. Frontoparietal sinuses and associated struts of bone occur primarily lateral and anterior to the apices of the horn sheaths (Figure 8). Struts run anteroventrally within maxillary sinuses that are sagittally in line with the tooth rows.

The other artiodactyls vary substantially in distribution of cranial sinuses, trabecular bone, and compact bone (Figures 10 and 11). The Giraffa crania lack a thick cancellous region, and have more extensive cranial sinuses above the brain than do bighorn sheep (Figure 10A–C). Giraffe ossicones, however, have dense superficial compacta and deep region of less-dense compact bone (Figure 10B and C), as in the scanned domes of Stegoceras (Figure 6) and Prenocephale prenes (Figure 10E). The median ossicone of a large male giraffe (Figure 10A) has similar density distribution to that of the Stegoceras dome. However, its cortical region appears to lack long vascular canals running to the surface, and is more like a large Pachycephalosaurus dome in gross cross sectional appearance [7]. The peccary (Figure 10D) has cranial sinuses above the braincase, but its skull roof lacks a cancellous region. The Cervus, Lama, and Antilocapra specimens (Figure 11) lack extensive sinuses or trabecular regions above the braincase. The skull roofs of Lama and Cervus are thin in cross section; Cervus has some cancellous bone (particularly in the antler nubs), but this region is not particularly deep. The frontals of Antilocapra are thin between the flanking horn cores, but much denser than the equivalent region of Cephalophus. This inter-horn bone in Antilocapra is the densest seen in any of the artiodactyl crania, aside from bone of some auditory bullae,

Figure 10. Cranial densities in Giraffa (TMM M 6815, UCMZ 1976.33), the peccary Tayassu (UCMZ 1975.279), and pachycephalosaur Prenocephale (GI SPS, field number PJC2004.8).

CT sections through crania of comparative taxa, with slices mapped onto lateral renders of crania. A. Giraffa camelopardalis male (TMM M6815), transverse section through the region of a median ossicone. B. Oblique transverse section of Giraffa camelopardalis (UCMZ 1976.33) through the posterior ossicones. C. Enlargement of B focusing on the ossicones. The layering of densities in the giraffe ossicones resembles that in the dome of Stegoceras validum (Figure 6). D. Transverse section through the cranium of Tayassu tajacu, showing a non-cancellous skull roof over cranial sinuses. D. Section through the cranium of the pachycephalosaur Prenocephale prenes (GI SPS). Despite mineral inclusions (localized red and yellow areas) and CT artifacts, the scan shows dense superficial and cancellous deep regions within the dome. Abbreviations: ec = endocranial cavity, fs = frontal sinus, lo = lateral ossicone; mo = median ossicone; ps = parietal sinus.

Figure 11. Cranial densities in the pronghorn (Antilocapra, UCMZ M 1989.61), elk (Cervus UCMZ M 1986.54), and llama (Lama, UCMZ M 1987.5).

CT sections through artiodactyl crania, with insets depicting section locations on lateral CT reconstructions. A. Transverse section through the pronghorns and anterior braincase of Antilocapra americana, showing dense bone (bright red) where the pronghorns meet the skull roof but no cranial sinuses. B. Oblique section through the posterior cranium of Antilocapra americana. The lack of cranial sinuses is similar in both depicted regions. C. Transverse section through the cranium of Cervus canadensis reveals cancellous bone at the antler bases. D. Section through the cranium of Lama glama reveals a thin skull roof. These specimens' morphologies contrast with extensive cancellous bone and/or sinuses above the endocranium in head-striking artiodactyls Ovibos and Giraffa, and the pachycephalosaurs Stegoceras and Prenocephale. Abbreviation: ec = endocranial cavity.

Finite element results and correlations with bone density distribution

Stegoceras validum (UA 2). Figures 12 and 13

Figure 12. Stress and strain in the dome of Stegoceras validum (UA 2).

A. Von Mises stresses (indicating closeness to yield) in a mid-sagittal section through the cranium of the pachycephalosaur Stegoceras validum. The highest stress within cancellous regions of the dome about 1 MPa, indicating a safety factor of 8–10 at the tested force. Stresses in compact bone surrounding the brain peak at 5 MPa, for a safety factor of 20–30. Constraints inflate stress artificially at the basal tubera and occipital condyle, and basicrainial and braincase stresses would be lower than depicted here. B. Von Mises stress and strain at 29 samples of a vertical transect through the dome. Strains are expressed in terms of safety factor: ultimate bone strain (0.6%) divided by the actual strain. Log10 values are used, because cortical safety factors approach 100 in some regions.

Figure 13. Effects of keratinous pad shape on head-butting stresses of Stegoceras validum (UA 2).

For all simulations impact force is 1360 N, and stresses are von Mises values. The range and peak visible stress are noted in the color scales. A. Dorsal view of cranium. Force is distributed across a large surface area as a large keratin pad is deformed upon impact. Peak stress at the impact site is 6 MPa, and modal stress is 3 MPa. B and C. More concentrated impacts, simulating a thinner layer of keratin. D. Ventral view of stresses in impact C, showing occipital condyle (oc) and muscular constraints (mc). The detail level of this model (2 million elements) increases chances of artificially high stress at near-singularities, such as when force is applied to the edges of neurovascular canals.

Stresses in the Stegoceras dome diminish rapidly deep to the area of loading (Figure 12). When force is applied to a broad area (simulating a spread of stress from a keratin covering), stress is lower and more diffuse (Figure 13). Strain energy is slightly higher in the cancellous internal region of the dome than in the compact periphery, but stress is so low that the increase in strain is apparent but minimal. Even in the most diffuse cancellous regions of the dome, strains never reach ultimate strain of cancellous bone (0.52–1.21% [15]; Figure 13B). With cancellous bone parallel to impact force assigned an elastic modulus of 1 GPa, safely factors are 5–10 at the 1360 N force of a simulated impact.

The high-resolution Stegoceras model (Figure 13) has more singularity artifacts than other models, but is still informative about force transmission through varying keratin pads. Stresses peak artificially at the occipital condyle constraint (up to 52 MPa) and never exceed ultimate or yield stress of compact bone, yet peak magnitudes vary with loading and constraint. The highest stresses at the apex of the dome are 46 MPa for concentrated impacts, and 8 MPa for cap-distributed impacts, at artificial singularities on the edge of a neurovascular canal. Deep to these artifacts, peak stresses are 1.5–2 MPa, similar to those seen in Figure 12. Stresses are relatively higher ventral to the brain cavity than dorsal to it, and as in the artiodactyls stresses are highest at the condyle or points of muscular constraint. Moderate strains in cancellous bone of the condyle and condylar neck indicate some cushioning effect [1]. However, when the models are also realistically constrained by dorsal neck muscles, stresses diminish at the occipital condyle and the floor of the endocranial cavity. Stress and strain are lower above the endocranial cavity in Stegoceras than in Ovibos.

Cephalophus leucogaster. Figures 14 and 15

Figure 14. External views of finite element stress in the duiker Cephalophus leucogaster (AMNH 52802).

Von Mises stresses of a 1360 N impact are depicted in lateral (A), dorsal (B), and ventral (C) views. Note artificial clipping occurs at the constraints. Higher stress occur at the impacts and around the brain than in Stegoceras (Figure 12), for the same collision force. The histogram depicts color coding for stress magnitudes, and the proportion of elements experiencing given levels of von Mises stress.

Figure 15. Internal stresses in the cranium of the duiker Cephalophus leucogaster (AMNH 52802).

Internal von Mises stresses are evident in posteroventral oblique (A) and lateral (B) views, through sections shown in respective insets. Impact stress diminishes from superficial to deep (B), but greater stresses occur at on the internal surface of the braincase than in Stegoceras. The histogram reflects the relative number of elements at different stress magnitudes.

Expected from its less voluminous dome, stresses in Cephalophus deep to the point of impact were higher than in Stegoceras for the same impact magnitude, despite the animals' similar basal skull lengths. Von Mises stresses decline precipitously from the impact towards the brain, falling from 10 MPa to 7, but the magnitudes remain higher than in Stegoceras. Two peaks of stress occur on the roof of the endocranium ventral to the dual impact sites (Figure 15 B), and overall stress of bone surrounding the brain (Figures 14, 15) is higher than in Stegoceras. The highest stress occurs at the constraints, and this stress does not diminish as markedly as in Ovibos or Stegoceras. Stress magnitudes in Cephalophus are much lower than in the flat-headed Lama, even when corrected for differing force magnitudes.

Ovibos moschatus (UCMZ M 1978.1.92). Figure 16

Figure 16. Finite element stresses in the musk ox Ovibos moschatus (UCMZ M 1978.1.92).

Von Mises stresses for Ovibos moschatus, in anterior oblique, posterior oblique, and dorsal view (A–C). D. Ventral view into the braincase (sectioned at the plane shown in A), showing high stress posteriorly. The highest stresses occur at the site of impact and (artificially) at muscular constraints (D); note the different color scale for stresses. E. Sagittal section (location marked in C) shows higher stresses channeled away from the endocranial cavity, in line with the posteroventrally directed impact force.

Stresses at the impact sites are higher in Ovibos than in Cephalophus, but both stress and strain diminish more rapidly deep to the force application. Stress and strain are higher in struts traversing the parietal sinus than in struts less in line with the impacts. Compact bone of the skull roof experiences low stress. Expected from its lower elastic modulus, cancellous bone over the brain and especially in the occipital condyles experiences higher strain than compact bone. The dorsal surface of the endocranial cavity experiences lower stresses and strains than in any of the other artiodactyls (Figure 16 D), but is higher than in Stegoceras. High stresses propagate through the keratin pad towards the muscular constraints (Figure 16 E).

Giraffa camelopardalis (UCMZ 1976.33). Figure 17

Figure 17. Finite element results of two head-strike simulations in the giraffe (UCMZ 1976.33).

Von Mises stresses in Giraffa camelopardalis, with the cranium in dorsal A, B) and oblique (C, D) views. A′ is a ventral view of a coronally-sectioned cranium (at the plane in D), looking up into the endocranial cavity. A, A′, and C depict vertical impacts through the median ossicone and frontal sinus. Note comparatively high stresses at the posterior muscular constraint and substantial stress in the endocranial cavity compared with Ovibos (Figure 11 D), yet more localized stress than in Antilocapra (Figure 13). Peak stresses are lower when the force is spread over all three ossicones (B and D), suggesting that such impacts are more favorable to the animals.

Ossicones of Giraffa experience high stress relative to the impacting structures in Ovibos. Stress is also greater in struts within frontal sinuses of Giraffa than in similar struts of Ovibos. Stress and strain are low in compact bone over the brain cavity, but substantially higher in impacts to the median ossicone than when all three are loaded (Figure 17). This differs from the condition in indirect, horn-impact loads in Capra [1], which also has a sinus and struts beneath points of impact and most of the brain posterior to it. Because the Giraffa model created in Mimics® has an artifact of thickened intrasinus struts for proper volumetric meshing, in life stress and strain would be higher in these structures. However, the applied force (Table 1) appears higher than likely.

Antilocapra americana (UCMZ M 1989.61). Figure 18

Figure 18. Head-strike stresses in the pronghorn (UCMZ M 1989.61).

Stresses in Antilocapra americana, primarily from mediolateral bending (A–C) and consolidated as von Mises stress (D, E). C is a ventral view of the cranium sectioned in the plane shown in A. Relatively high tensile stresses occur at the base of the pronghorn cores (A, B) and roofing the endocranial cavity (C), where CT reveals dense compact bone (Figure 8).

Stresses in Antilocapra differed greatly from those of the other specimens (Figure 18). The horns display tensile stress medially and compression laterally, expected given that the impact would induce bending loads. The frontals at the base of the pronghorns experience high stress but not particularly high strain, yet the skull midline between the pronghorns displays high strain energy and high tensile stress in a complex pattern. Stress is high at the occipital constraints, but not as high as in the other artiodactyls.

Tensile stresses induced by lateral bending of the horncores predominate in Antilocapra (Figure 18). Although anteroposterior peak stresses are higher at the constraints, the frontals experience 5–10 MPa mediolateral tensile stress, and the base of the horncores −7 to −14 MPa compressive stress, over large areas. Locations of high stresses correspond to dense compact bone of the pronghorn cores and the frontals. Complex tensile stresses in the skull roof occur at the interfrontal suture (Figure 18), where bone is slightly less dense than that lateral to it. Cancellous bone between the pronghorn cores and brain cavity may experience tensile and compressive strains from lateral bending of the cores. Peak von Mises stresses are 26 MPa, for a safety factor of four to five.

Lama glama (UCMZ 1987.5). Figure 19

Figure 19. Simulated head-strike stresses in the llama (UCMZ M 1987.5).

Von Mises stress from a simulated head impact in Lama glama, an artiodactyl that does not fight in this manner. A. Dorsal and B. ventral endocranial views depict higher stresses that occur at yield in cancellous bone orthogonal to the impact.

The Lama model experienced high bending stresses and strains, with primarily compressive stress on the skull roof and tensile stress on the dorsal surface of the endocranial cavity. The latter stresses are particularly high compared with those in the other examined taxa, despite artificial thickening of the model necessary for successful FE meshing. Peak von Mises stress reached 60 MPa for a distributed impact (Figure 19), and 120 MPa (which would chip the bone) for force applied to the parietal crest. These results are consistent with both structural and material characteristics of the Lama cranium. The skull roof is thin in the Lama, as in Antilocapra, but cranial bone densities and elastic moduli are lower. As with the Giraffa model, the Lama geometry is slightly inflated for solid meshing and stresses would be higher in realistically thinner bone.

Recursive partitioning situates pachycephalosaurs among head-butting taxa

Figure 20 and Table 3 show strengths of correlation between cranial functional morphology and agonistic behavior (Table 2), and probabilities that taxa are correctly assigned to behaviors given their suites of morphology. The presence of extensive cancellous bone, dome versus flat head shape, and the size of neck muscle attachments have high correlation with behavior, whereas density of compact bone correlates less strongly.

Figure 20. Strengths of behavior-morphology correlations for selected taxa.

Correlate disruption values from Table 3, for incorrectly assigned behaviors in modern taxa and for Stegoceras validum when hypothesized as not head-butting. ∑ correlations values on the left indicate how much incorrect assignment perturbs the original correlations, and the scale on the right indicates how well the animals' morphology fits their “correct" behavior. The pachycephalosaur Stegoceras has a strong affinity with its hypothesized head-butting behavior, while the giraffe's lower score indicates ambiguous correlations between its morphology and behavior.

Table 2. Possible categories and classes for recursive partition analysis.

Table 3. Correlate disruption of recursive partitioning for selected taxa.

Correlate disruption suggests that Stegoceras has a high head-butting probability when included among extant taxa. Classifying the head-butting Cephalophus and Stegoceras as non-combatants reduces likelihood ratio chi-square values (G2) by the same amount; the morphology of Ovibos is a slightly better fit. In contrast, Giraffa disrupts G2 values less than the other taxa, indicating that giraffe morphology is better classified outside that of the animals that strike their heads together directly.


Extant combative ungulates vary in adaptations for head-butting, and pachycephalosaurs possessed a combination of their respective traits. In extant ungulates, recursive partition analysis shows strong correlations between head-butting and cranial morphologies that also occur in Stegoceras. Both Ovibos and Giraffa have dome-like structures that dissipate force, yet in Ovibos cancellous bone lies over the brain as compliant protection, and in the giraffe the point of impact lies anterior to the brain cavity and above struts of the frontal sinus. The Antilocapra model experiences tension in the thin skull roof. The domes of Stegoceras and Prenocephale resemble Ovibos heads in general shape and occurrence of cancellous bone, and domes of Cephalophus leucogaster, Ovis canadensis and giraffe ossicones in stratification of compact and trabecular regions.

The closest morphological matches of pachycephalosaur domes are the domes of Ovis canadensis and especially Cephalophus leucogaster (Figure 7), despite the presence of sinuses and/or horns in the artiodactyls. Bighorn rams famously collide with their horns by rearing and falling towards each other, which produces loud reverberations. However, they also charge and collide with the tops of their heads between the horns, a direct head-butting behavior similar to head strikes suggested for Stegoceras.

Recursive partitioning suggests that Stegoceras's morphology fits head-strike behavior comparably to the duiker and musk ox. More taxa and biomechanical results would better evaluate strengths of character/behavior associations, and improve on our application of the method. However, strong correlations of head butting with features common to this Stegoceras specimen and fighting artiodactyls suggest behavioral and biomechanical commonalities.

Biomechanical FEA results of this study corroborate the interpretations of Farke [1] for artiodactyls and Snively and Cox [8] for pachycephalosaurs. The large osseous dome of Stegoceras is more effective at spreading force than the lower domes of Cephalophus, and the keratin pad of Ovibos better absorbs strain [8], [10]. However, the Cephalophus FE model experienced much lower relative stress than did the thin-skulled lama, suggesting that thick, solid frontals suit duikers well for head-butting [1], [5], [6]. Although we were unable to vary material properties in the Cephalophus model, we can predict lower strains close to the endocranium than in Stegoceras. Higher densities and larger struts of cancellous bone (Figures 4, 5, 6) in Cephalophus would result in higher stiffness, lower deformation, but less absorption of impact energy than in the pachycephalosaur. High cancellous strain in Ovibos corroborates Farke's [1] FE results with a simulated trabeculae-filled frontal sinus, and his prediction that copious struts within Cape buffalo and bighorn sheep crania would absorb shock of vigorous head-butting. Both Farke's and the current study strongly parallel Maity and Tekalur's findings for bighorn sheep [10], which will further guide evaluations of strain and material effects on combative behaviors.

Similarly to Snively and Cox's [8] simple geometric models, the CT based Stegoceras FE model experiences low cortical strain, higher (but still low) cancellous strain, and dramatic reduction of stress distal to the impact on the dome surface. The cortical portion of the dome experiences peak stresses of 8–46 MPa, below their ultimate levels (180–200 MPa in compression: [15]; incorrectly set at 300 MPa in reference [8]). For its cortical bone to reach ultimate stress and strain [15], this Stegoceras would have to impose 5–10 times the tested force on its dome. The highest peak stresses occur at the edges of neurovascular canals, where the mesh has artificially sharp angles; lower cortical stresses adjacent to these artifacts represent the more probable life condition. Cancellous stress and strains peak at 1 MPa and 0.02%, below failure levels (6–12 MPa; 0.2–1.21% strain [11], [16], [17]) even in low density regions of the dome. This suggests that failure of the entire dome was unlikely even in younger pachycephalosaurs with primarily cancellous bone, despite their diffuse, apparently fragile trabeculae. Radiating trabeculae In older adults with primarily compact bone, strain and displacement near the brain would be negligible, similar to results from Farke's [1] simulations of an artificially solid dome in Capra.

The dome of this specimen of Stegoceras was structurally capable of dissipating force of impacts against solid objects, more so than skull roofs of artiodactyls known to head-butt at high forces. However, low dome vascularization in large individuals [7], and presumably reduced healing ability and supply to a keratin pad, argue against head-head combat in older pachycephalosaurs [7], [8]. Examination of older Cephalophus leucogaster, which head-butt despite dense domes and lack of a large keratin pad above the point of impact, will test this interpretation. Apparent beam hardening in the Stegoceras scans highlights the necessity of physical sectioning and histological examination [7] to check CT densities in fossil vertebrates. Regardless, dome strengths of large, old and young pachycephalosaurs must be examined with the present or similar methods, to assess impressions based on histology, CT data, and even FEA of the current specimen.

The scanned adult Stegoceras shares morphological correlates of head-butting with extant artiodactyls. A deep cancellous region beneath a point of impact occurs in the largest head-striking artiodactyls, including Ovibos and Giraffa, and we predict this zonation in CT scans of smaller head-striking forms. Stegoceras lacks pneumatized frontal sinuses present in Giraffa and Ovis canadensis. However, compact bone surrounding vascular traces in Stegoceras forms tubular struts that traverse the dome, recalling the struts within cranial sinuses of ungulates. These neurovascular canals open onto the skull surface, a condition Hieronymus et al. [2] identify as a correlate of cornified pads (as in Ovibos) covering the crania of head-butting artiodactyls and hornbills. The struts in Stegoceras are interpretable simultaneously as vascular conduits feeding development of a keratin covering [2], and as structural braces analogous to struts in artiodactyl cranial sinuses. Both biomechanically and developmentally the tubes serve as potential correlates for head butting capability in pachycephalosaurs. This hypothesis will be falsified if the struts are shown to be loosely anchored or little affected by overall impact stress.

Our findings, and those of Farke [1] and Maity and Tekaur [10], point to other such predictions of functional morphology in known and putative head-butters, testable through CT and FEA. CT of tapinocephalid synapsids will likely show struts within sinuses similar to those imaged here in Tayassu, and present in head-butting suids that Barghusen [19] identifies as behavioral analogs. When combined with conceptual advances for evaluating structures unknown in modern fauna [20], finite element modeling will further advance hypotheses of behavior in fossil animals beyond anatomical and mechanical intuition.

Future directions: transient analyses and energy dissipation

The forces applied thus far to FE models of pachycephalosaurs, Cephalophus, Capra [1], and Ovis [10] are reasonable impact loadings [18]. However, FEA has approximated impact events with steady-state, linear static simulations. True collision simulations are unlikely to greatly alter stress and strain results, but will better enable analysis of energy dissipation by trabeculae. Trabeculae and larger struts angled relative to the impact force would be loaded in bending and be weaker than in compression, but would absorb strain energy better than struts parallel to the force [1], [15]. The role of solid struts or neurovascular conduits (seen in Stegoceras) would be possible to model using 2D analyses [8]. Characterizing how morphology contributes to energy dissipation has potential application to military, motorcycle, and sporting helmets designed to reduce injury [21], [22,] [23].

Materials and Methods

CT scanning, geometry reconstruction, and finite element meshing

Specimen numbers, lengths, and forces for included taxa are listed in Table 1; all University of Calgary specimens had been zoo animals. The cranium of a male bighorn sheep (Ovis canadensis) was sectioned mid-sagittally with a bone saw. Crania of Stegoceras validum, Ovibos moschatus, Giraffa camelopardalis, Cervus canadensis (elk), Lama glama, Antilocapra americana (pronghorn), and Tayassu tajacu (peccary) were scanned on a General Electric Lightspeed CT scanner (Canada Diagnostics Centre, Calgary, Alberta), at settings for diagnoses of bone pathology. The Stegoceras validum specimen was also scanned on a high-resolution x-ray CT at the University of Texas at Austin. Ovibos specimens represent a juvenile and an adult, as determined by examining tooth eruption patterns. A cranium scan of the duiker Cephalophus leucogaster was provided by Andrew Farke, also scanned on a General Electric Lightspeed medical scanner [5]. We also imaged a section through the median ossicone of a large male giraffe (Texas Memorial Museum TMM M6815, scanned by Timothy Rowe), from a CT sequence on the University of Texas, Austin Digimorph web site (, accessed August 17, 2009). For anatomical comparison with Stegoceras, we examined scans of a large specimen of the Mongolian pachycephalosaur Prenocephale prenes (Geological Institute Section of Palaeontology and Stratigraphy GI SPS, field number PJC2004.8), then on loan to Philip Currie (University of Alberta).

Except for the male giraffe (TMM M6815), all CT data were in DICOM format. We used OsiriX® for 2- and 3D visualization of structure and density, to evaluate internal density distribution and guide reconstruction of finite element geometry and material properties. Densities were assessed primarily with the full-color NIH lookup table, which visualizes density gradations more clearly than do grayscale palettes. OsiriX® can section CT volumes in transverse, coronal, and sagittal planes. In other planes, we used the scissor tool to remove unwanted rendered bone, and produce sections approximately two mm thick. This was necessary for the Prenocephale specimen, which was rotated slightly out of anatomical neutral pose on the scanner bed, and for anteroventrally sloping sections of two artiodactyls. The latter angled sections are of an un-impacted control region through the braincase of Antilocapra, and lateral ossicones of the female Giraffa specimen.

We produced cranial finite element models of Stegoceras, Cephalophus, adult Ovibos, Giraffa, Lama, and Antilocapra. Mimics® (Materialise) facilitated construction of most 3D models (Figure 16) from density-based masks on individual CT slices, after methods of Arbour and Snively [24] and Bell et al. [25]. Internal spaces were automatically modeled from scans for the artiodactyls, but for the Stegoceras models, imaged matrix had to be removed manually within the cranial sinuses and endocranial cavity. The resulting models were saved as .stl surface meshes, and errors detected and corrected cyclically in the Mimics® remesher and Geomagic® Studio (Geomagic Inc.), for compatibility with Strand7® (Strand7 Pty Ltd) finite element analysis software. We used Avizo® (Visage Imaging) to construct the finite element model of Cephalophus. The surface mesh was refined initially with Avizo®'s RemeshSurface function, and remaining errors corrected with the software's surface editor. As with the Mimics®-based artiodactyl models, Avizo® yielded a high resolution tetrahedral model with larger struts and nasal conchae intact.

From these surface models and masks, we constructed two types of FE models. For the Stegoceras, Antilocapra, Giraffa, and Lama specimens, Strand7® and Mimics® produced error-free tetrahedral solid meshes, suitable for FEA, from a triangular surface mesh that included surfaces around internal cavities (Figures 11, 13, 14, 15, 16). For one model of Ovibos, a broken zygoma and circumorbital bone hindered tetrahedral meshing from its surface model. Instead of simplifying the modeled osteology, we produced voxel-based, hexahedral FE meshes using Mimics®, from density masks of both Ovibos and the hollowed-out Stegoceras CT scans. Incorporating all voxels results in millions of elements with prohibitive memory requirements and computation time. We therefore grouped voxels into larger sets, for meshes of approximately 200,000 hexahedra of varying shape (not just cubes) to better approximate original surface contours. This grouping retains anatomical details such as struts of bone, but results in a blocky external appearance in parts of the model. Even with varying element shape, a strictly hexahedral mesh is less “smooth" and accurate than a combination of hexahedral and tetrahedral elements, as Jasinoski et al. [26] constructed for dicynodonts. However, a large number of nodes in a hexahedral mesh ensures adequate resolution of results. We used high-resolution surface models to smooth the appearance of the FE mesh and visualize both mesh and external geometry.

An additional FE model of the Stegoceras cranium was created based on the Austin CT scan, which had twice the transverse resolution and 4.5 times the anteroposterior resolution of the original medical scan. A tetrahedral mesh of 2.2 million elements was created in Avizo®. This model became the primary one for analyses of the Stegoceras cranium.

Material properties and kinematic constraints

We used Mimics® to assign material properties based on Hounsfield density values to most of the extant specimens (Figure 21), using procedures similar to those of Arbour and Snively [24] and Bell et al. [25]. With this method we assigned elastic modulus to bone in 18 discrete ranges of density, by the equation [25]:relating elastic modulus (E) and Hounsfield unit opacity (HU) from data of Hellmich et al. [27]. This equation yields higher elastic moduli than others, but better encompasses values in the upper end of the observed range [26], [28] and allows meaningful comparisons of overall morphological performance. Because keratin does not follow the same relationship, we manually assigned its properties (E = 3.9 GPa, ν = 0.28, ρ = 1300 kg/m3 [29]) to the keratin pad of the musk ox. The Stegoceras densities could not be fully automated (Figure 21) because the extent of permineralization was unknown. To densities above 2500 HU in Stegoceras we assigned properties of that density, under the assumption that beam hardening artifacts inflated values above those of the original compact bone. Cancellous bone in Stegoceras was assigned a conservatively low elastic modulus of 1 GPa. In cattle and humans [30], E = 0.5–4.5 GPa in dense cancellous bone like that seen in this Stegoceras dome. Mimics® was unavailable for producing density-stiffness assignments for Cephalophus, and its cranium was given a uniform density of compact bone (17 GPa [15]); the implications of this uniformity are discussed above.

Figure 21. Finite element models with CT-based stiffness values.

Elastic modulus indexed to CT Hounsfield values in (A) Stegoceras validum (UA 2), (B) Ovibos moschatus, and (C) Antilocapra americana. Moduli were assigned manually for Stegoceras, because CT beam hardening inflated some densities and fossilization obscured others. Modulus assignment for bone was automated in Ovibos and Antilocapra, and the pad in Ovibos assigned the modulus of alpha keratin.

To ensure that these structures would deform realistically under simulated head impacts, we constrained the models in two ways. Assuming transmission of force through the occipital condyles to the atlas, we constrained the condyles against translation and rotation. We also constrained the models along the rim of the nuchal crest after McHenry et al. [31], assuming offset forces restrained by neck muscles (m. transversospinalis capitis/m. complexus in Steoceras [32], [33], [34]; m. splenius capitis in the mammals). Muscular constraint at the basitubera in Stegoceras resulted in high stress artifacts ventrally, but did not affect stress levels in the dome.

Forces and interpretation of structural performance

We applied compressive forces to apices of the horn sheaths in Ovibos, the top of the dome of Stegoceras, ossicones of Giraffa, the anterior parietal of Lama, and the medial surfaces of the horns in Antilocapra. Force applications are evident as dorsal concentrations of stress in Figures 12, 13, 19. Loads were applied to several areas of the Stegoceras model in separate analyses (Figure 13), because the size and spread of force through a keratin pad is unknown [8]. Two analyses were run on the giraffe, with forces respectively applied to the median ossicone alone, and to the median plus both lateral ossicones.

Magnitudes of stress and strain scale linearly with force magnitude unless a structure is greatly deformed. Stress and strain distributions are independent of force magnitude when force is applied to precise areas (and material is behaving elastically). In the absence of data on forces, it is reasonable to apply a unit magnitude to all FE models in a comparison, and directly scale stress and strain magnitudes when realistic forces are determined. However, we scaled forces to puts them in a biological context, and to open our assumptions to criticism. The baseline force for Stegoceras specimens was 1360 N, calculated for the similarly-sized pachycephalosaur Homalocephale colathoceros at a closing speed of 3 m/s [8]. Comparability of structural performance in animals dictates that forces are scaled to the subjects' sizes, ideally to surface areas for feeding comparison [35]. Considering their great variety of head shapes, we used a different scaling method for the artiodactyls. Their baseline force was 1088 N, calculated for Capra with a skull length of approximately 0.18 m [36], [1]. Assuming the same impact velocity and force proportional to skull mass, this force was then scaled to cube of the ratio of skull lengths for each artiodactyl versus Capra (Table 1). The force appears to be excessive for the giraffe, and caution is warranted for strict interpretations of its performance relative to other taxa. Because Cephalophus has a similar basal skull length to Stegoceras, we applied the same 1360 N to its cranium.

Recursive partition analysis

Inferring behavior in fossil animals is possible by phylogenetic comparisons [37], [38], especially when pertinent behavior, morphology, and physiological response [34] converge in the taxon's extant phylogenetic bracket [38]. Phylogenetic inferences become less practical with more specific behaviors and a less constrained extant bracket [34], [38], and are inapplicable to pachycephalosaur head-butting. However, we can examine strengths of morphology/behavior correlation in extant taxa, and by inference in possible extinct analogs, by recursive partition analysis (RPA). The method was implemented using JMP® (SAS Institute, Inc.).

In RPA [2], strengths of correlation are proportional to the likelihood ratio chi-square values (G2) of correlation between a category (such as behavior) and a potentially influencing factor (such as a morphological feature or biomechanical result). We included comparative taxa whose morphological traits we could observe directly. These included specimens of the cape buffalo Synceras caffer which clash through the flat portion of their horns, the helmeted hornbill Buceras vigil which collide in flight with keratin-covered osseous domes [2], and the horse Equus caballus which do not engage in head strikes.

We chose not to include phylogeny as an influencing factor in recursive partitioning. Analogous morphology and behavior can arise in distantly related groups, yet behavior can differ between closely related clades even at the species level. Our application of RPA strictly assessed correlation between morphology and known or hypothesized behavior. Because behavior in an extinct taxon is usually unknown, phylogeny might unduly bias the strength of the taxon's behavioral assignment. An example would be bias towards head butting in a thin-skulled extinct bovid, if “Bovidae" is a trait that otherwise correlates well with ramming behavior. However, RPA results can be informative in later studies that optimize co-evolution of behavior and morphology onto known phylogenies.

To assess the strength of morphology-behavior correlation for individual taxa, we used correlate disruption as described in the introduction. Correlate disruption is the decrease in likelihood ratio chi-square values (G2) from the sum of “correct" G2 values (CD = ΣG2 correct-ΣG2 incorrect), which conversely indicates the fit of an animal to assigned behavior.


Andrew Farke (Raymond Alf Museum) encouraged and facilitated the duiker analyses. His comments and those of Ken Carpenter and an anonymous reviewer greatly improved the manuscript. Warren Fitch (University of Calgary), Philip Currie, and Eva Koppelhus (University of Alberta) facilitated access to specimens, and Timothy Rowe (University of Texas, Austin) generously granted use of the male giraffe scans. We thank John Cotton, Richard Fox, Jack Horner, Braden Barr, Aaron LeBlanc, Erin Maxwell, Brian Rankin, Lawrence Witmer, and Tobin Hieronymus for discussions and suggestions. Stacy Schmidt and Jennifer Oslund (Canada Diagnostics Centre, Calgary) performed the CT scanning. Victoria Arbour, Michael James, Michael Burns, Derek Larson, and Phil Bell (University of Alberta) refined FEM procedures, and Sabrina Hines and Ben Borkovic (University of Calgary) provided photographic assistance.

Author Contributions

Analyzed the data: ES JMT. Contributed reagents/materials/analysis tools: ES JMT. Wrote the paper: ES. Conceived and designed the research: ES JMT. Performed CT scanning: ES JMT.


  1. 1. Farke AA (2008) Frontal sinuses and head-butting in goats: a finite element analysis. The Journal of Experimental Biology 211: 3085–3094.
  2. 2. Hieronymus TL, Witmer LM, Tanke DH, Currie PJ (2009) The facial integument of centrosaurine ceratopsids: morphological and histological correlates of novel skin structures. The Anatomical Record 292: 1370–1396.
  3. 3. Carpenter K (1997) Agonistic behavior in pachycephalosaurs: a new look at head-butting behavior. Contributions to Geology, University of Wyoming 32: 19–25.
  4. 4. Geist V (1976) Mountain Sheep. 399 p. A Study in Behavior and Evolution.
  5. 5. Farke AA (2010) Evolution and functional morphology of the frontal sinuses in Bovidae (Mammalia: Artiodactyla), and implications for the evolution of cranial pneumaticity. Zoological Journal of the Linnean Society 159: 988–1014.
  6. 6. Estes RD (1991) 660 p. Behavior Guide to African Mammals.
  7. 7. Goodwin MB, Horner JR (2004) Cranial histology of pachycephalosaurs (Ornithischia: Marginocephalia) reveals transitory structures inconsistent with head-butting behavior. Paleobiology 30: 253–267.
  8. 8. Snively E, Cox A (2008) Structural mechanics of pachycephalosaur crania permitted head-butting behavior. Palaeontologica Electronica 11(1):3A: 1–17.
  9. 9. Sues H-D (1978) Functional morphology of the dome in pachycephalosaurid dinosaurs. Neues Jahrbuch für Geologie und Paläontologie Monatshefte 8: 459–472.
  10. 10. Maity P, Tekalur SA (2011) Finite element analysis of ramming in Ovis canadensis. Journal of Biomechanical Engineering 133: 021009-1. 9 pp.
  11. 11. Bubenik AB (1990) Epigenetical, morphological, physiological, and behavioral aspects of evolution of horns, pronghorns, and antlers. In: Bubenik GA, Bubenik AB, editors. Horns, Pronghorns, and Antlers. pp. 3–113.562 p.
  12. 12. Krieg H (1944) Der Schädel einer Giraffe. Naturwissenschaften 32: 148–156.
  13. 13. Dagg AI, Foster JB (1981) 232 p. The Giraffe, Its Biology, Behavior, and Ecology.
  14. 14. Kitchen DW, Bromley PT Geist V, Walthers D, editors. (1974) Agonistic behavior of territorial pronghorn bucks. The Behavior of Ungulates and Its Relation to Management, Volume I. International Union for Conservation of Nature and Natural Reseources 365–381. Publication 24.
  15. 15. Cowin SC (2001) Bone Mechanics. 980 p.
  16. 16. Vahey JW, Lewis JL, Vanderby R (1987) Elastic moduli, yield stress, and ultimate stress of cancellous bone in the canine proximal femur. Journal of Biomechanics 20: 29–33.
  17. 17. Kuhn JL, Goldstein SA, Ciarelli MJ, Mathews LS (1989) The limits of canine trabecular bone as a model for human: a biomechanical study. Journal of Biomechanics 22: 95–107.
  18. 18. Kitchener AC (1988) An analysis of forces of fighting of the blackbuck (Antilope cervicapra) and the bighorn sheep (Ovis canadensis) and the mechanical design of the horns of bovids. Journal of Zoology, London 214: 1–20.
  19. 19. Barghusen HR (1975) A review of fighting adaptations in dinocephalians (Reptilia, Therapsida). Paleobiology 1: 295–311.
  20. 20. Padian K, Horner JR (2010) The evolution of ‘bizarre structures’ in dinosaurs: biomechanics, sexual selection, social selection or species recognition? Journal of Zoology 283: 3–17.
  21. 21. Ivins BJ, Crowley JS, Johnson J, Warden DL, Schwab KA (2008) Traumatic brain injury risk while parachuting: comparison of the personnel armor system for ground troops helmet and the advanced combat helmet. Military Medicine 173: 1168–1172.
  22. 22. Mills NJ (2010) Critical evaluation of the SHARP motorcycle helmet rating. International Journal of Crashworthiness 15: 331–342.
  23. 23. Mills NJ, Gilchrist A (2006) Bicycle helmet design. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications 220: 167–180.
  24. 24. Arbour VM, Snively E (2009) Finite element analysis of ankylosaurid dinosaur tail club impacts. The Anatomical Record 292: 1412–1426.
  25. 25. Bell PR, Snively E, Shychoski L (2009) A comparison of the jaw mechanics in hadrosaurid and ceratopsid dinosaurs using finite element analysis. The Anatomical Record 292: 1339–1351.
  26. 26. Jasinoski SC, Rayfield EJ, Chinsamy A (2009) Comparative feeding biomechanics of Lystrosaurus and the generalized dicynodont Oudenodon. The Anatomical Record 292: 862–874.
  27. 27. Hellmich C, Kober C, Erdmann B (2008) Micromechanics-based conversion of CT data into anisotropic elasticity tensors, applied to FE simulations of a mandible. Annals of Biomedical Engineering 36: 108–122.
  28. 28. Katz JL, Yoon HS, Watchel EF, McMahon TA (1984) The effects of remodeling on the elastic properties of bone. Calcified Tissue International 36: S31–S36.
  29. 29. Kitchener AC (1992) The evolution and mechanical design of horns and antlers. In: Rayner JMV, Wooton RJ, editors. Biomechanics in Evolution. pp. 229–253.287 p.
  30. 30. Turner CH, Cowin SC, Rho JY, Ashman RB, Rice JC (1990) The fabric dependence of the orthotropic elastic constants of cancellous bone. Journal of Biomechanics 23: 549–561.
  31. 31. McHenry CR, Wroe S, Clausen PD, Moreno K, Cunningham E (2007) Supermodeled sabercat, predatory behavior in Smilodon fatalis revealed by high-resolution 3D computer simulation. Proceedings of the National Academy of Sciences 41: 16010–16015.
  32. 32. Maryánska T, Osmólska H (1974) Pachycephalosauria, a new suborder of ornithischian dinosaurs. Acta Palaeontologica Polonica 30: 45–102.
  33. 33. Tsuihiji T (2005) Homologies of the transversospinalis muscles in the anterior presacral region of Sauria (crown Diapsida). Journal of Morphology 263: 151–178.
  34. 34. Snively E, Russell AP (2007) Functional morphology of neck musculature in the Tyrannosauridae (Dinosauria, Theropoda as determined via a hierarchical inferential approach. Zoological Journal of the Linnean Society 151: 759–808.
  35. 35. Dumont ER, Grosse IR, Slater G (2009) Requirements for comparing the performance of finite element models of biological structures. Journal of Theoretical Biology 256: 96–103.
  36. 36. Jaslow CR, Biewener AA (1995) Strain patterns in the horncores, cranial bones and sutures of goats (Capra hircus) during impact loading. Journal of Zoology 235: 193–210.
  37. 37. Bryant HN, Russell AP (1992) The role of phylogenetic analysis in the inference of unpreserved attributes of extinct taxa. Philosophical Transactions of the Royal Society of London B 337: 405–418.
  38. 38. Witmer LM (1995) The extant phylogenetic bracket and the importance of reconstructing soft tissues in fossils. In: Thomason JJ, editor. Functional Morphology in Vertebrate Paleontology. pp. 19–33.277 p.