Figures
Abstract
Carbonyl reduction constitutes a phase I reaction for many xenobiotics and is carried out in mammals mainly by members of two protein families, namely aldo-keto reductases and short-chain dehydrogenases/reductases. In addition to their capacity to reduce xenobiotics, several of the enzymes act on endogenous compounds such as steroids or eicosanoids. One of the major carbonyl reducing enzymes found in humans is carbonyl reductase 1 (CBR1) with a very broad substrate spectrum. A paralog, carbonyl reductase 3 (CBR3) has about 70% sequence identity and has not been sufficiently characterized to date. Screening of a focused xenobiotic compound library revealed that CBR3 has narrower substrate specificity and acts on several orthoquinones, as well as isatin or the anticancer drug oracin. To further investigate structure-activity relationships between these enzymes we crystallized CBR3, performed substrate docking, site-directed mutagenesis and compared its kinetic features to CBR1. Despite high sequence similarities, the active sites differ in shape and surface properties. The data reveal that the differences in substrate specificity are largely due to a short segment of a substrate binding loop comprising critical residues Trp229/Pro230, Ala235/Asp236 as well as part of the active site formed by Met141/Gln142 in CBR1 and CBR3, respectively. The data suggest a minor role in xenobiotic metabolism for CBR3.
Enhanced version
This article can also be viewed as an enhanced version in which the text of the article is integrated with interactive 3D representations and animated transitions. Please note that a web plugin is required to access this enhanced functionality. Instructions for the installation and use of the web plugin are available in Text S1.
Citation: Pilka ES, Niesen FH, Lee WH, El-Hawari Y, Dunford JE, Kochan G, et al. (2009) Structural Basis for Substrate Specificity in Human Monomeric Carbonyl Reductases. PLoS ONE 4(10): e7113. https://doi.org/10.1371/journal.pone.0007113
Editor: Nick Gay, University of Cambridge, United Kingdom
Received: April 23, 2009; Accepted: August 24, 2009; Published: October 20, 2009
Copyright: © 2009 Pilka et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: The Structural Genomics Consortium is a registered charity (number 1097737) that receives funds from the Canadian Institutes for Health Research, the Canadian Foundation for Innovation, Genome Canada through the Ontario Genomics Institute, GlaxoSmithKline, Karolinska Institutet, the Knut and Alice Wallenberg Foundation, the Ontario Innovation Trust, the Ontario Ministry for Research and Innovation, Merck & Co., Inc., the Novartis Research Foundation, the Swedish Agency for Innovation Systems, the Swedish Foundation for Strategic Research and the Wellcome Trust. The project was supported by the Deutsche Forschungsgemeinschaft (MA 1704/5-1). This project was partly supported by Czech Science Foundation (Grant No. 303/07/0994). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Reduction of carbonyl groups to the corresponding alcohols constitutes a significant metabolic step both for endogenous and xenobiotic compounds [1]–[3]. These reactions are carried out by distinct NAD(P)(H) dependent oxidoreductases mainly belonging to three protein superfamilies, namely the short-chain dehydrogenases/reductases (SDR), aldo-keto-reductases (AKR), or medium-chain dehydrogenases/reductases (MDR) [1]–[3].
A unifying feature of carbonyl reductases appears to be their broad and often overlapping substrate specificity. Endogenous substrates comprise steroids, eicosanoids, cofactors, neurotransmitters and polyols. In addition, a large set of xenobiotics has been identified as substrates for carbonyl reducing enzymes including drugs such as warfarin, daunorubicin or ketoprofen, environmental pollutants (PAH quinones derived from diesel exhaust such as phenanthrenequinone) or tobacco derived carcinogens like NNK [2], [3].
In humans, several enzymes contribute significantly to the metabolic reductive transformation, mainly found in tissues such as liver, kidney, placenta or the central nervous system. The major cytosolic enzymes identified are the NADPH-dependent carbonyl reductase (CBR1, according to the official nomenclature system SDR21C1)[4], [5], belonging to the SDR family, and members of the AKR family such as aldehyde reductase (AKR1A1), aldose reductase (AKR1B1), several dihydrodiol/hydroxysteroid dehydrogenases (of the AKR1C subfamily) or aflatoxin aldehyde reductase (AKR7A2) [1]–[3], [6].
CBR1 fulfills an important role in the phase I metabolism of xenobiotics. Substrates include o-quinones derived from polycyclic aromatic hydrocarbons (PAH) or p-quinones such as menadione, besides an extraordinarily wide spectrum of xenobiotic carbonyls such as anthracyclines, metyrapone or the carcinogen 4-methylnitrosamino-1-(3-pyridyl)-1-butanone. The endogenous compound spectrum comprises steroids, eicosanoids and lipid derived aldehydes [7]–[9].
Recent studies indicate a role for CBR1 in apoptosis, tumor metastasis and oxygen induced stress [10]–[12]. At present, no clear evidence is available which specific endogenous substrate is responsible for these effects, however a recent study showed that CBR1 effectively inactivates in vitro the lipid aldehyde 4-oxononenal [13], indicating that CBR1 is involved in the stress response and elimination of metabolites produced by reactive oxygen species.
A human paralog, CBR3 (SDR21C2)[4], [5], which is 71% identical to CBR1 [6] is located in the vicinity of the CBR1 gene on chromosome 21 at 21q22.12. However, thus far limited information on enzymatic properties of CBR3 is available [14]; in this and another study [15] only CBR3 activity towards the model substrate menadione, 4-nitrobenzaldehyde or 4-benzoylpyridine was reported. Given the importance of CBR1 and other carbonyl reductases in endogenous and xenobiotic carbonyl metabolism, we performed a study to establish a substrate specificity profile of human CBR3. To understand structure-function relationships between the two related human CBR enzymes, we analyzed substrate specificity features of CBR1 and CBR3, and furthermore establish a structural basis for the activity differences through mutational, kinetic and crystallographic studies.
Materials and Methods
Cloning and Mutagenesis
A human CBR3 clone was obtained from the MGC clone collection, and a synthetic, codon-adapted CBR1 clone was obtained from GenScript Corporation. CBR1 and CBR3 expression constructs were cloned by PCR into pNIC28-Bsa4 or p11-Bsa4, which are T7/pET21a derived expression vectors containing Tobacco Etch Virus (TEV) protease cleavable N-terminal hexahistidine tags. All CBR1 and CBR3 mutants were generated from the vector template encoding the wild type (WT) gene by using a site-directed mutagenesis kit (Quick change, Stratagene). Sequences of all wild-type and mutant constructs were verified by DNA sequencing.
Expression and purification of CBR proteins
Expression plasmids were transformed into competent Rosetta E. coli cells. Protein expression was induced at 18°C at an OD600 = 1 by adding isopropyl-1-thio-β-D-galactopyranoside to a final concentration of 0.5 mM to cultures grown in Terrific Broth, supplemented with 50 µg/ml kanamycin or 100 µg/ml ampicillin at 37°C. Induced cultures were then incubated overnight with shaking at 18°C. Cell pellets were resuspended in 50 mM HEPES pH 7.5, 500 mM NaCl, 5 mM imidazole, 5% glycerol and protease inhibitors (EDTA-free Complete, Sigma). Cells were lysed using a high pressure homogenizer (EmulsiFlex-C5, Avestin), followed by centrifugation at 37,000 x g for 45 min.
The supernatant was loaded on an AKTA-Express system (GE/Amersham) and purified using nickel-affinity chromatography on a HisTrap FF 1 ml column (GE/Amersham) and gel filtration on a Superdex 200 column (GE/Amersham) equilibrated in 10 mM HEPES pH 7.5, 500 mM NaCl, 5% glycerol, 0.5 mM TCEP.
For crystallization purposes, CBR3 wild-type fractions from gel filtration were subjected to TEV cleavage overnight at 4°C and the cleaved protein was purified on IMAC-Sepharose (GE/Amersham). The final step of this purification was ion-exchange chromatography on a QHP column (GE/Amersham) using a 0.05–2 M NaCl gradient in 50 mM HEPES pH 7.5, 0.5 mM TCEP, followed by a subsequent buffer-exchange into gel filtration buffer (as above). All purification steps were analyzed by SDS-PAGE and the molecular weight of purified protein was verified by electrospray mass ionization-time-of flight mass spectrometry (Agilent LC/MSD time-of-flight). Proteins were concentrated to 5–10 mg/ml in an Amicon Ultra-15 concentrator with a 10 kDa mass cut-off and the final concentration was measured by UV-spectroscopy (Labtech, Nanodrop 1000 spectrophotometer). Proteins were flash-frozen in liquid nitrogen until further use.
Substrate screening of CBR1 and CBR3 proteins
Frozen aliquots of CBR1 and CBR3 enzymes were thawed quickly in water of RT and immediately placed on ice. Assays were performed at 30°C in buffer S (50 mM sodium phosphate, pH 6.8, 150 mM NaCl, 1 mM MgCl2, 2% (v/v) DMSO). The final assay solution contained 200 nM of protein, 200 µM NADPH and 200 µM of compound. Prior to the start of the experiment, each protein was incubated in buffer containing 1 mM NADPH at 1 µM enzyme concentration for 10 minutes at RT. A solution comprising NADPH in buffer alone was used for the setup of control experiments for each compound tested. Dilutions of compounds at 10 mM concentrations in DMSO were prepared in 96-well plates and used to set up the assay plate (384-well white PCR plate, Bio-rad), by adding 200 nl of each solution into 7.8 µl of buffer S (STARlet nano, Hamilton). The assay plate was centrifuged (1 min, 1,000 rpm, RT) to collect all solutions in the bottom of the wells. Reactions were performed on 24 wells at a time in a filter-based fluorescence reader (Omega Polarstar, BMG Labtech). After one minute of monitoring the fluorescence intensity (excitation, 355 nm; emission, 460 nm) the reactions were started with injections from the instrument-controlled syringe, of 2 µl/well of protein/NADPH solution (see above). The fluorescence intensity in all 24 wells was then monitored for additional 10 minutes. The next set of reactions were afterwards automatically started and measured via the instrument's script mode until all wells of the plate were read. In total the time for the measurement of a complete set of triplicates for 96 conditions was approximately 90 minutes. Data were analyzed for the initial rates of activity, by regression in the linear region of the curves as appropriate. Protein-independent, ‘background’ activities were subtracted and corrected for compound effects, e.g. quenching, by normalization to the fluorescence offset that resulted from the injection of NADPH. Specific activities (in µmol/min/mg) were calculated using the molecular weight of the protein.
Kinetic analysis of CBR proteins
The kinetic measurement for oracin was performed employing a HPLC method (Agilent 1100 Series, Agilent Technologies, Waldbronn, Germany). Samples were incubated for 60 min and reactions were stopped by the addition of 80 µl of 30% ammonia and cooling on ice. The mixtures were extracted twice with 500 µl of ethylacetate and the combined organic phases were evaporated under vacuum. The residue was dissolved in the mobile phase and analyzed by HPLC (mobile phase, 10 mM hexanesulfonic acid and 50 mM triethylamine adjusted to pH 3.3 with H3PO4; flow, 1.5 ml/min; 5 µM BDS; Hypersil C18 column (4×250 mm, 5 µm, Thermo Electron Corporation, Cheshire, UK)). The fluorescence emitted at 418 nm was monitored upon 340 nm excitation. The increase of the product concentration was linear over the measurement time
Catalytic properties for isatin were determined by measuring the decrease in absorbance at 340 nm (Cary 100 scan photometer, Varian, California, USA). A reaction mixture consisted of substrate, 500 µM NADPH, 100 mM Tris–HCl pH 7.4, and enzyme. The enzyme solution was diluted in the corresponding elution buffer, a 7∶3 mixture of 10∶500 (mM) imidazole buffer, to ensure that substrate consumption was linear over time. Each concentration was measured at least three times.
The reaction temperature was held constant at 25°C. After a preincubation time of 2 min 10 µl of enzyme solution were added to 790 µl of reaction mixture. A reference cuvette contained the reaction solution without enzyme. Isatin stock solution was prepared in DMSO. The final concentration of DMSO in the reaction mixture was 10% (v/v). A maximum of 4000 µM isatin was used in the kinetic measurement as the change in absorbance of this concentration still follows Lambert–Beer's law and no precipitation of isatin occurred. The kinetic constants were calculated by nonlinear regression (Gnuplot 4.2) with a molar extinction coefficient for NADPH of 6.22×103 M−1 cm−1.
For the determination of the kinetic constants for the activity of the enzymes towards 1,2-naphthoquinone and 1,4-naphthoquinone a modified version of the protocol used for substrate screening (see above) was applied: In a 96-well microplate, 12 concentrations of each substrate, covering ranges from 0 to 4 mM or 0 to 7.5 mM of 1,2- and 1,4-naphthoquinone, respectively, were set up in two rows and then dispensed into the remaining rows to fill the entire plate. This was then used as pre-plate for the assay as described above. The resulting assay concentrations of the two substrates spanned, thus, ranges from 0 to 1 mM or from 0 to 1.875 mM, respectively. Linearity in the protein-independent reduction of compound was observed up to the applied maximum concentrations, thus showing that the compounds were soluble up to that concentration. The resulting data were fitted to the Michaelis-Menten equation using non-linear regression (Levenberg-Marquardt) calculated with Gnuplot 4.0 (http://www.gnuplot.info) or with Prism 5.0 (GraphPad Software, Inc.). In cases where a fit was not possible, due to a failure to plateau, a value of kcat/Km was estimated from a linear regression over the initial part of the curve. Very small activites (compared to background) were regarded noise below a threshold for the goodness of fit (R2) of 0.5 (for all other data values of R2 were 0.9 or higher)
Crystallization of human CBR3
Frozen protein was quickly thawed, and 5 mM NADP was added to the protein aliquot prior to crystallization. A sitting drop consisting of 50 nl of protein solution and 100 nl of well solution was equilibrated against a well solution containing 1.8 M tri-ammonium citrate pH 7.0 at 20°C. Large, irregular crystals that appeared after 24 hrs, were cryo-protected in a mixture of well solution with 25% glycerol in the presence of NADP before flash-cooling in liquid nitrogen.
Data Collection, Phasing and Refinement
The native dataset was collected on a Rigaku FRE-Superbright generator with R-AXIS HTC area detector. Initial phases were calculated by molecular replacement using the crystal structure of human CBR1 (PDB 1wma) as a model for PHASER [16]. Before the refinement commenced, 5% of the data was flagged during processing for the calculation of Rfree. The final model was created by alternating rounds of the refinement using REFMAC5 [17] and model building with adding ligand and solvent molecules using COOT [18]. The final statistics for the CBR3 binary complex structure are given in supplementary information Table S2.
CBR3 loop modelling
The active site loop of CBR3 was identified and submitted to a search against an ICM built-in library containing suitable loops with matching ends and as close to the sequence as possible. The algorithm then inserts the matched loops into the model and modifies the side-chains according to the model sequence. The next step adjusts the best loops found and keeps a stack of alternatives. We have manually browsed through the alternatives until identifying a suitable conformation that satisfied the condition of being part of the cofactor binding cavity (as seen in CBR1) and not bearing major atom clashes. The suitable loops were then submitted to local minimisations, with the side chains allowed to move along the chi angles in order to solve the remaining clashes. Upon solution of clashes, the modelled loop was accepted and the resulting model was saved.
Substrate docking
Docking procedures were performed according to the methodology described and implemented in the program ICM v.3.4-9d[19]. Three different protein structures were used in the docking procedure as receptors: human CBR1 (PDB 1wma), human CBR3 (PDB 2hrb) and human CBR3 with the active site loop modelled as a variant of the conformation adopted in human CBR1. Each of the receptors was docked with seven ligands: 1,2-naphthoquinone, isatin, oracin, menadione, metyrapone, oxononenal and NNK. In each docking procedure, grid maps representing different properties of the receptor were computed. During the docking, either one of the torsional angles of the ligand was randomly changed or a pseudo-Brownian move was performed. Each random change was followed by 100 steps of local conjugate-gradient minimization against the grid maps. The new conformation was accepted or rejected according to metropolis criteria using a temperature of 600 K. The length (number of Monte Carlo steps) of the docking run as well as the length of local minimization was determined automatically by an adaptive algorithm, depending on the size and number of flexible torsions in the ligand. Visual inspection was performed for the lowest energy conformations satisfying the absence of clashes after docking.
Results
Substrate screening of CBR3 and comparison to CBR1
Human CBR3 was expressed as N-terminally His6-tagged protein in E. coli and purified to apparent homogeneity by consecutive chromatographic steps comprising immobilized metal affinity and size-exclusion chromatography. The enzyme was subjected to a substrate screening against a focused library of 111 different carbonyl substrates, using spectrophotometric and HPLC-based assays. The library consisted of a variety of endogenous carbonyl containing ligands such as polyols, eicosanoids or steroids, as well as a diverse set of xenobiotic carbonyl compounds, shown to be substrates for distinct types of carbonyl reductases (for review see [6]).
The screening was carried out side-by-side with human CBR1 under identical conditions and revealed that CBR3 has a much narrower substrate spectrum compared to CBR1. Our results confirm the previously recognized broad substrate specificity of CBR1 [1], [3], [6], [9] which is able to metabolize a wide range of substrates including endogenous compounds such as prostaglandins or lipid-derived aldehydes, a wide spectrum of xenobiotics such as ortho- and paraquinones and anthracyclins (supplementary information Table S1). In total, we found significant activity (see below, Figure 1) for 43 out of 111 substrates, with a large fraction of quinones. In contrast, a limited set of substrates were reduced by CBR3 in an NADPH-dependent manner (31 substrates), usually with significantly less activity than CBR1. Among the best substrates for CBR3 was 1,2-naphthoquinone, for which an activity of 2.5 µmol/(min mg) was observed. Compared to the CBR3 activity for 1,2-naphthoquinone a significant (i.e., >10%) activity was observed for 12 out of the 22 tested quinones (Figure 1). Interestingly, a preference of CBR3 for orthoquinones is apparent; no activity was found towards menadione, one of the standard substrates used in activity screens for carbonyl reductases. This is in line with the lack of activity against any other quinone in para configuration. Among the non-quinone compounds that were identified as substrates for CBR3 were isatin and oracin, coniferyl aldehyde and acetohexamide.
The threshold for significant activities (measured at 200 µM substrates and 200 nM (∼6.6 µg/ml) enzyme concentration) was set to 10% of the activity of CBR3 against 1,2-naphthoquinone (2.5 µmol/(min mg)), which was set to 1.0 for comparison. All other activities denoted either b.t. (below threshold) or n.a. (no activity observed).
We investigated in more detail the difference in activity between CBR1 and CBR3 towards important xenobiotics such as isatin and naphthoquinones (Table 1). The comparison of activities towards isatin and 1,2-naphthoquinone is in line with the observation from the screen: CBR1 showed higher catalytic efficiency for both substrates.
In summary, there are a number of differences between the activity profiles of the two carbonyl reductases. The most striking of them is the strong difference in the activity towards the two naphthoquinones whose only structural difference is the position of the two carbonyl groups (i.e. para vs. ortho). Furthermore, in contrast to CBR1 [9], [11], CBR3 shows no activity towards eicosanoids or aliphatic carbonyls like 4-oxononenal. At this point in time the activity observed against coniferyl aldehyde cannot be assigned to a specific chemical group, i.e. double bond or carbonyl group. Further experiments are required to verify product formation for several of the hits identified.
Active site architecture of CBR enzymes
To understand the substrate specificity differences between CBR1 and CBR3 we determined the structure of human CBR3 by X-ray crystallography and compared it to recently determined human and porcine structures [12], [20] of CBR1. Based on these structures, residues of potential mechanistic importance were selected for site-directed mutagenetic replacement, and activity of resulting mutants was tested.
The 3D structures of CBR1 and CBR3 are similar, as expected with a canonical Rossmann-fold for nucleotide cofactor binding enzymes of the SDR family [21]. CBRs represent prototypes of monomeric SDRs with a two-helical insertion stabilizing an interface that in other SDRs constitutes the main oligomerization surface (Figure 2).
Panel A: The substrate binding loop in CBR3 is engaged in contacts (red oval) to a symmetry related copy (grey), resulting in an open conformation of the active site. The CBR-specific helical insertion involved in dimerization is highlighted in green. Panel B: Comparison of active site configurations of human CBR enzymes. The overlay of the complex structure of human CBR1 (1wma, in grey) with cofactor (magenta) and inhibitor (ball and stick model) with the binary complex of human CBR3 with NADP (2hrb, in red) shows the open and closed active site loop conformations. Panel C: Sequence alignment of human carbonyl reductases CBR1, CBR3 and dicarbonyl reductase DCXR. The 2-helical insertion found in CBR enzymes is highlighted by green boxing, the active site loop region discussed in this paper is highlighted by a red box. Secondary structure elements are shown for CBR1 and DCXR below the alignment.
Inspection of the active sites of the CBR structures reveals an arrangement consistent with the postulated reaction mechanism [21], [22]. Accordingly, Tyr193/194 functions as the catalytic acid/base, Ser139/140 stabilizes the substrate by forming interactions to the substrate carbonyl, and Lys197/198 forms hydrogen bonds with the nicotinamide ribose moiety, thereby lowering the pKa of the Tyr-OH to promote proton transfer. Hydride transfer is from the S-side of C4 of the nicotinamide to the substrate. The role of Asn113/114 is to stabilize the position of Lys197/198 via a conserved water molecule, and furthermore, to establish a proton relay at the active site, including coenzyme, substrate, Tyr193/194, ribose 2'OH, Lys197/198, water, and Asn113/114.
The main distinguishing feature of the crystal structures of human/porcine CBR1 (ternary cofactor inhibitor complex PDB 1wma [12]; binary cofactor complex PDB 1n5d [20]) and human CBR3 (binary cofactor complex, PDB 2hrb) is the conformation of the substrate binding loop: whereas the CBR1 structures show a conformation with a more closed active site, in CBR3 the loop is engaged in crystal contacts with a symmetry related molecule (Figures 2A and 2B). Despite extensive crystal screening and attempts to obtain ternary complexes, we were unsuccessful in finding different crystal forms. Inspection of the “open” structure reveals that substrate docking in this conformation is not useful to produce models explaining the observed substrate features. We therefore decided to model the CBR3 sequence using the CBR1 structure as template (Figure 3), assuming a similar loop arrangement. The loop modelling results in a conformation with all residues in acceptable regions of a Ramachandran plot, moreover docking analysis with different substrates allowed us to successfully identify critical residues for substrate recognition and catalysis. A comparison of the two CBR structures in the loop-closed conformation shows a wide opening to a gorge-like active site. In the CBR1-inhibitor complex structure (1wma), the inhibitor molecule occupies large parts of the entrance and is also covered by a PEG molecule derived from crystallization. CBR1 has a slightly narrower substrate binding cleft (Figure 4) than CBR3, mainly as a result of the terminal sulf-methyl group of Met141. This residue is replaced in CBR3 by Gln142 (Figure 4F), which has a similar but not identical conformation, as observed in structures 1wma and 2hrb.
Panel A: Crystal structure of CBR3 (2hrb), close-up of the active site. The cofactor is shown with its electron density map, contoured at 1σ level. Selected residues are shown as sticks. Residues involved in the catalysis are shown with white carbon atoms. Residues used for mutagenesis in this study are shown with yellow carbon atoms. Note that the active site loop is extended, as found in the crystal structure. Panel B: Modelled loop in CBR3 (orange) and comparison to CBR1 (green). Positions and residues used for mutagenesis are shown as sticks. Inhibitor and cofactor from CBR1 (PDB 1wma) are included for reference.
A–C: CBR1 (green), D–E: CBR3, with modelled loop (orange). First Column (A and D): solvent accessible surface representation of the active site pockets coloured according to electrostatic potentials, with the cofactor represented as sticks. Yellow line marks the plane cutting through the active site. The plane divides the pocket into two halves that are depicted in the following two columns. Second column (B and E): ‘left’ half of the pocket. Third column (C and F): ‘right’ half of the pocket. Cofactor is shown for orientation purpose. Residues that were mutated in this study are marked with asterisks. Catalytic residue labels are underlined.
Critical residues for quinone specificity in CBR enzymes
Comparison of the active sites of CBR1 and CBR3 suggests that three residue positions are critical for substrate recognition and catalysis. In particular, we identified position 229/230 (Trp229 in CBR1, Pro230 in CBR3), position 235/236 (Ala235 in CBR1, Asp236 in CBR3) and position 141/142 (Met141 in CBR1, Gln142 in CBR3) as the most likely candidates for determination of substrate specificity. To analyze the effect of site-directed mutagenetic replacements on activity differences between the two enzymes, we selected isatin and two structural quinone isomers, 1,2- and 1,4-naphthoquinone, as model ortho- and paraquinone substrates.
A major distinguishing feature between CBR1 and CBR3 is Trp229, which is replaced by a prolyl residue in CBR3 (cf Figure 2C). The ternary complex of CBR1 with NADP and OH-PP[12], a high affinity inhibitor, as well as docking studies with different CBR1 substrates suggest a critical role of this residue for substrate selectivity. As deduced from the CBR1-NADP-1,4-naphthoquinone complex model (Figure 5), Trp229 serves two possible functions, namely to provide a chemical moiety for aromatic stacking interactions with the substrate, and also to coordinate a water molecule through the indole nitrogen. This water molecule (Wat1), observed in the structure of human CBR1 (PDB 1wma) is putatively responsible for the CBR1 specificity towards para-quinones. This seems to be further reinforced by the position of another water molecule (Wat2) seen in the structure of CBR1, which matches with the C4-carbonyl group of the pose adopted by 1,4-naphthoquinone docked into the active site of CBR1 (Fig. 5). We tested this hypothesis, by replacing Trp229 by Pro or Phe, as well as by creating a double mutant Trp229Pro/Ala235Asp. In CBR1 this second position is located close to Trp229 as well as to the nicotinamide and pyrophosphate portions of the cofactor (Figure 3). Both CBR1 Trp229 mutants showed significant decrease in activity for 1,4-naphthoquinone and a modest decrease for its ortho- isomer (Table 2). Data for isatin (Table 3) showed drastic increase in Km for Trp229Pro mutant while both Trp229 substitutions led to faster substrate turnover highlighting the importance of aromatic stacking interactions for substrate recognition and binding. Destabilisation of the active site was much more significant in the Trp229Pro/Ala235Asp double mutant, where CBR1 residues were exchanged with the corresponding CBR3 residues. It resulted in a 1000-fold increase in Km and a 50-fold increase in Vmax towards isatin in comparison to WT CBR1 and in a complete loss of activity towards 1,4-naphthoquinone. Both CBR3 Pro230 mutants showed some activity towards the para-naphthoquinone but decreased activity for the ortho-naphthoquinone and isatin, as compared with the WT. However, the behaviour of the double Pro230Trp/Asp326Ala mutant towards naphthoquinones was very similar to the WT CBR3 (Table 2), indicating the possible occurrence of a steric clash between introduced aromatic residue and Asp236. In case of isatin, a 2-fold decrease in Vmax was observed for the Pro230Phe mutant, while replacing Asp236 with Ala resulted in a significant drop of the Km value, indicating improved binding of the substrate in the active site (Table 3). These data suggest that the residues at both positions are strongly involved in substrate and product binding, indicated by data with swapped residues that either reduce (CBR1) or increase (CBR3) catalytic efficiencies. These residues are part of a more complex set of factors that combine to determine the activity. A major role within this proposed network of interactions falls to Trp229 in CBR1.
The catalytic residues Ser139 and Tyr194 orient the substrate carbonyl, whereas residue Trp229 makes aromatic-stacking interactions and coordination of a water molecule (Wat1) through the indole nitrogen. As a result, the water Wat1 is positioned to form hydrogen bond with the carbonyl group in position to the substrate carbonyl. Note the crystallographic water molecule Wat2 found in the same position as the carbonyl oxygen from the docked substrate. Distances are shown in Å.
Residues Met141 and Gln142, found at homologous positions in CBR1 and CBR3, respectively (Fig. 2C), and displaying similar side-chain conformations are located on helix αF and form the wall opposite of Trp229/Pro230 (Figure 3B). Replacing this position had a dramatic effect on CBR1: while Met141Gln and Met141Ala mutants showed modest decrease in activity towards naphthoquinones (Table 2), combining these mutations with Trp229Pro led to destabilisation of the protein (very low solubility, no activity). The opposite effect was observed for CBR3, with the Gln142Met mutant showing a modest increase in activity, and with the double mutants still active towards 1,2- naphthoquinone.
Taken together, these data highlight the significance of the side-chain chemistry at position 142 in determination of CBR activity.
Discussion
The objective of this study was to establish a substrate profile for human CBR3, to compare its enzymatic properties to its paralog CBR1, and to establish determinants for activity and substrate specificity. First, CBR3 catalyzes the carbonyl reduction of a much narrower spectrum of xenobiotic substrates in contrast to the exceptionally broad substrate profile of CBR1 [1], [3], [6], [9]. Furthermore, no endogenous substrate could be unequivocally detected to this end for CBR3. Of the known CBR1 substrates, only quinone compounds with ortho substitution or compounds like isatin and the cytostatic oracin could be identified as substrates for human CBR3.
Second, this work establishes the structural basis for narrower substrate specificity in CBR3, and highlights the active site loop found in CBRs as flexible entity that is one critical factor for substrate specificity. Exchange of non-conserved residues between CBR1 and CBR3 in this loop results in position-specific effects that control catalysis. In particular, the data reveal critical roles for Trp229 and Pro230 in CBR1 and CBR3, respectively, for activity towards para-quinones. These data suggest that hydrophobic interactions as well as possible contacts made through a water molecule coordinated by the indole nitrogen of Trp229 could contribute to substrate orientation and possibly product release in the active site. This is supported by the fact, that in the experimental structures, the main-chain of the loop starts to deviate at position 229. This clearly indicates that a major difference between CBR1 and CBR3 is a large, hydrophobic wall built by Trp229 in CBR1, and a more open substrate site in CBR3, irrespective if the loop modelling, as performed in this work, is correct or not. Other variable residues found on the loop also contribute to a varying extent to substrate specificity, such as residue Asp236 in CBR3, introducing an additional charge into the active site in comparison to CBR1. Other determinants for activity are residues found at position 141/142, namely Met141 in CBR1 and Gln142 in CBR3. Although of similar size, these residues have significant differential effects on catalytic properties of the active site. A preliminary study [23] showed the whole region encompassing residues 235/236–243/244 as crucial in determination of activities of CBR1 and CBR3. Replacing this region in CBR3 with residues from CBR1, combined with Pro230Trp mutation, was sufficient for a 1000-fold increase in activity to ∼40% of activity of CBR1. To summarise, the substrate pockets of CBR1 and CBR3 show fundamental differences in size, as manifested through residues found at position 229, as well as in surface properties, as seen with the more polar residues lining the active site in CBR3 (Figure 4).
Although not specifically tested in this study, it is conceivable that some of the activities observed in this study are related to “propinquity” effects [24]. It has been previously shown that orthoquinones can be reduced to the corresponding hydroquinones in a manner not involving a protein derived catalytic base, as seen with mutant studies performed on members of the aldo-keto reductase [24] or medium-chain dehydrogenase/reductase (MDR) families [25]. Instead, the enzyme is used as a “scaffold” to bring the reduced nicotinamide cofactor and the orthoquinone into close proximity, to allow hydride and direct solvent proton transfer to the adjacent carbonyl groups [24]. This possibility underlines the importance of correct cofactor and substrate positioning in the active site.
As observed from in silico screening (http://www.genecards.org/) and other experimental data [15], CBR1 is an ubiquitously expressed enzyme with highest levels found in liver and the central nervous system, with a significantly lower transcription level but overlapping expression pattern found for CBR3. This suggests some redundancy in substrate specificity, but could also point to different substrates classes and hence different roles for these paralogous enzymes. CBR1 plays without doubt a major role in the phase I metabolism of xenobiotic compounds including xenobiotic quinones [1], [3], [6], [26], a function which we at present cannot wholeheartedly postulate for CBR3, in light of the observed narrow substrate spectrum. In addition, several more recently conducted studies also suggest a critical role for CBR1 in the metabolism of endogenous lipid mediators such as prostaglandins or lipid oxidation products such as the highly reactive and genotoxic 4-oxonon-2-enal, which is produced under oxidative stress [27]–[29]. This could relate the observations that CBR1 is involved in metastasis, neurodegeneration and apoptosis to its properties to catalyze prostaglandin and lipid aldehyde inactivation [9], [11], [27], however, final experimental proof for this hypothesis is necessary. In light of these data, the structural differences determined, and the apparent lack of activity of CBR3 towards lipid mediators like prostaglandins or oxononenal we suggest that CBR3 is likely involved in the metabolism of structurally and chemically different substrates. The precise identity of these compounds needs to be established in further metabolomic and molecular genetic studies.
Supporting Information
Table S1.
Activity screening of human CBR1 and CBR3 against the compounds in the focused carbonyl substrate library. Only activities above 0.25 µmol/(min mg), i.e. above 10% of the activity of CBR3 for 1,2-naphthoquinone, were regarded as significant, otherwise marked as below threshold (b.t.); cases where no activity at all was found are marked ‘n.a.’. Results represent averages ±STDV (n = 3), measured at 200 µM of substrate and 200 nM (∼6.6 µg/ml) of enzyme.
https://doi.org/10.1371/journal.pone.0007113.s001
(0.10 MB DOC)
Table S2.
Data collection and refinement statistics for human CBR3
https://doi.org/10.1371/journal.pone.0007113.s002
(0.03 MB DOC)
Datapack S1.
Standalone iSee datapack - contains the enhanced version of this article for use offline. This file can be opened using free software available for download at http://www.molsoft.com/icm_browser.html.
https://doi.org/10.1371/journal.pone.0007113.s003
(ICB)
Text S1.
Instructions for installation and use of the required web plugin (to access the online enhanced version of this article).
https://doi.org/10.1371/journal.pone.0007113.s004
(PDF)
Acknowledgments
We thank Frank von Delft for help with data collection at the Swiss Light Source (SLS).
A preliminary account of this work has been presented on the occasion of the 14th Workshop on Enzymology and Molecular Biology of Carbonyl Metabolism, 2008, Kranjska Gora, Slovenia [23].
Author Contributions
Conceived and designed the experiments: ESP WHL UO. Performed the experiments: ESP FHN WHL YEH JED GK VW HJM. Analyzed the data: ESP FHN WHL YEH VW EM UO. Wrote the paper: EM UO.
References
- 1. Hoffmann F, Maser E (2007) Carbonyl reductases and pluripotent hydroxysteroid dehydrogenases of the short-chain dehydrogenase/reductase superfamily. Drug Metab Rev 39: 87–144.
- 2. Jin Y, Penning TM (2007) Aldo-keto reductases and bioactivation/detoxication. Annu Rev Pharmacol Toxicol 47: 263–292.
- 3. Oppermann U (2007) Carbonyl reductases: the complex relationships of mammalian carbonyl- and quinone-reducing enzymes and their role in physiology. Annu Rev Pharmacol Toxicol 47: 293–322.
- 4. Bray JE, Marsden BD, Oppermann U (2009) The human short-chain dehydrogenase/reductase (SDR) superfamily: a bioinformatics summary. Chem Biol Interact 178: 99–109.
- 5. Persson B, Kallberg Y, Bray JE, Bruford E, Dellaporta SL, et al. (2009) The SDR (short-chain dehydrogenase/reductase and related enzymes) nomenclature initiative. Chem Biol Interact 178: 94–98.
- 6. Matsunaga T, Shintani S, Hara A (2006) Multiplicity of mammalian reductases for xenobiotic carbonyl compounds. Drug Metab Pharmacokinet 21: 1–18.
- 7. Atalla A, Breyer-Pfaff U, Maser E (2000) Purification and characterization of oxidoreductases-catalyzing carbonyl reduction of the tobacco-specific nitrosamine 4-methylnitrosamino-1-(3-pyridyl)-1-butanone (NNK) in human liver cytosol. Xenobiotica 30: 755–769.
- 8. Atalla A, Maser E (1999) Carbonyl reduction of the tobacco-specific nitrosamine 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in cytosol of mouse liver and lung. Toxicology 139: 155–166.
- 9. Wermuth B (1981) Purification and properties of an NADPH-dependent carbonyl reductase from human brain. Relationship to prostaglandin 9-ketoreductase and xenobiotic ketone reductase. J Biol Chem 256: 1206–1213.
- 10. Botella JA, Ulschmid JK, Gruenewald C, Moehle C, Kretzschmar D, et al. (2004) The Drosophila carbonyl reductase sniffer prevents oxidative stress-induced neurodegeneration. Curr Biol 14: 782–786.
- 11. Ismail E, Al-Mulla F, Tsuchida S, Suto K, Motley P, et al. (2000) Carbonyl reductase: a novel metastasis-modulating function. Cancer Res 60: 1173–1176.
- 12. Tanaka M, Bateman R, Rauh D, Vaisberg E, Ramachandani S, et al. (2005) An unbiased cell morphology-based screen for new, biologically active small molecules. PLoS Biol 3: e128.
- 13. Carbone DL, Doorn JA, Petersen DR (2004) 4-Hydroxynonenal regulates 26S proteasomal degradation of alcohol dehydrogenase. Free Radic Biol Med 37: 1430–1439.
- 14. Lakhman SS, Ghosh D, Blanco JG (2005) Functional significance of a natural allelic variant of human carbonyl reductase 3 (CBR3). Drug Metab Dispos 33: 254–257.
- 15. Miura T, Nishinaka T, Terada T (2008) Different functions between human monomeric carbonyl reductase 3 and carbonyl reductase 1. Mol Cell Biochem 315: 113–121.
- 16. McCoy AJ, Grosse-Kunstleve RW, Storoni LC, Read RJ (2005) Likelihood-enhanced fast translation functions. Acta Crystallogr D Biol Crystallogr 61: 458–464.
- 17. Murshudov GN, Vagin AA, Dodson EJ (1997) Refinement of macromolecular structures by the maximum-likelihood method. Acta Crystallogr D Biol Crystallogr 53: 240–255.
- 18. Emsley P, Cowtan K (2004) Coot: model-building tools for molecular graphics. Acta Crystallogr D Biol Crystallogr 60: 2126–2132.
- 19. Abagyan R, Totrov M, Kuznetsov DA (1994) A new method for protein modelling and design: applications to docking and structure prediction from the distorted native conformation. J Comput Chem 15: 488–506.
- 20. Ghosh D, Sawicki M, Pletnev V, Erman M, Ohno S, et al. (2001) Porcine carbonyl reductase. structural basis for a functional monomer in short chain dehydrogenases/reductases. J Biol Chem 276: 18457–18463.
- 21. Oppermann U, Filling C, Hult M, Shafqat N, Wu X, et al. (2003) Short-chain dehydrogenases/reductases (SDR): the 2002 update. Chem Biol Interact 143-144: 247–253.
- 22. Filling C, Berndt KD, Benach J, Knapp S, Prozorovski T, et al. (2002) Critical residues for structure and catalysis in short-chain dehydrogenases/reductases. J Biol Chem 277: 25677–25684.
- 23. El-Hawari Y, Favia AD, Pilka ES, Kisiela M, Oppermann U, et al. (2009) Analysis of the substrate-binding site of human carbonyl reductases CBR1 and CBR3 by site-directed mutagenesis. Chem Biol Interact 178: 234–241.
- 24. Schlegel BP, Ratnam K, Penning TM (1998) Retention of NADPH-linked quinone reductase activity in an aldo-keto reductase following mutation of the catalytic tyrosine. Biochemistry 37: 11003–11011.
- 25. Porte S, Crosas E, Yakovtseva E, Biosca JA, Farres J, et al. (2009) MDR quinone oxidoreductases: the human and yeast zeta-crystallins. Chem Biol Interact 178: 288–294.
- 26. Wermuth B, Platts KL, Seidel A, Oesch F (1986) Carbonyl reductase provides the enzymatic basis of quinone detoxication in man. Biochem Pharmacol 35: 1277–1282.
- 27. Doorn JA, Maser E, Blum A, Claffey DJ, Petersen DR (2004) Human carbonyl reductase catalyzes reduction of 4-oxonon-2-enal. Biochemistry 43: 13106–13114.
- 28. Doorn JA, Petersen DR (2003) Covalent adduction of nucleophilic amino acids by 4-hydroxynonenal and 4-oxononenal. Chem Biol Interact 143–144: 93–100.
- 29. Doorn JA, Petersen DR (2002) Covalent modification of amino acid nucleophiles by the lipid peroxidation products 4-hydroxy-2-nonenal and 4-oxo-2-nonenal. Chem Res Toxicol 15: 1445–1450.