http://orcid.org/0000-0001-9129-1672
Figures
Abstract
The enzyme endo-inulinase hydrolyzes inulin to short chain fructooligosaccharides (FOS) that are potential prebiotics with many health promoting benefits. Although the raw materials for inulin production are inexpensive and readily available, commercial production of FOS from inulin is limited due to inadequate availability of the enzyme source. This study aimed to identify the fungi capable of producing endo-inulinase based on the in silico analysis of proteins retrieved from non-redundant protein sequence database. The endo-inulinase of Aspergillus ficuum was used as reference sequence. The amino acid sequences with >90% sequence coverage, belonging to different fungi were retrieved from the database and used for constructing three-dimensional (3D) protein models using SWISS-MODEL and Bagheerath H. The 3D models of comparable quality as that of the reference endo-inulinase were selected based on QMEAN Z score. The selected models were evaluated and validated for different structural and functional qualities using Pro-Q, ProSA, PSN-QA, VERIFY-3D, PROCHECK, PROTSAV metaserver, STRAP, molecular docking, and molecular dynamic simulation analyses. A total of 230 proteins belonging to 53 fungal species exhibited sequence coverage >90%. Sixty one protein sequences with >60% sequence identity were modeled as endo-inulinase with higher QMEAN Z Score. The evaluations and validations of these 61 selected models for different structural and functional qualities revealed that 60 models belonging to 22 fungal species exhibited native like structure and unique motifs and residues as that of the reference endo-inulinase. Further, these models also exhibited similar kind of interaction between the active site around the conserved glutamate residue and substrate as that of the reference endo-inulinase. In conclusion, based on the current study, 22 fungal species could be identified as endo-inulinase producer. Nevertheless, further biological assessment of their capability for producing endo-inulinase is imminent if they are to be used for commercial endo-inulinase production for application in FOS industry.
Citation: Chikkerur J, Samanta AK, Dhali A, Kolte AP, Roy S, Maria P (2018) In Silico evaluation and identification of fungi capable of producing endo-inulinase enzyme. PLoS ONE 13(7): e0200607. https://doi.org/10.1371/journal.pone.0200607
Editor: Maureen J. Donlin, Saint Louis University, UNITED STATES
Received: September 8, 2017; Accepted: June 29, 2018; Published: July 12, 2018
Copyright: © 2018 Chikkerur et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper and its Supporting Information files.
Funding: The authors gratefully acknowledge the Council of Scientific and Industrial Research (CSIR); (Sanctioned File No. 09/1158(0002)2K17), Ministry of Science and Technology, Government of India for the senior research fellowship. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Fructooligosaccharides (FOS) are the linear short chain oligomers with repeating fructose molecules linked together by β (2–1) glycosidic bond with a terminal glucose molecule. FOS is one of the potential prebiotics [1, 2]. It stimulates the growth of bifidobacteria and lactobacilli in the gut [3,4] and leads to the production of short chain fatty acids which further stimulate the growth of colorectal mucosal cells, slow down atrophy of the mucosa and reduce the risk of harmful changes in the colon [5]. FOS is the first approved prebiotic food supplement for health benefits [6]. The global market of FOS was found to be 134.0 kilo tons in 2015 and is expected to grow significantly in next few years [5]. Therefore, large scale commercial production of high quality FOS will be required to fulfill the increasing demand.
Although, fructooligosaccharides can be produced by acid or enzymatic hydrolysis of inulin, the enzymatic method is mostly preferred as it produces high quality FOS economically [7]. Fructosyltransferase and endo-inulinase are the primary enzymes that are capable of producing FOS by hydrolyzing sucrose and inulin respectively [8]. Nevertheless, FOS production through fructosyltransferase hydrolysis has disadvantages. In this method, only limited amount of sucrose can be converted to oilgofructose due to the inhibition of enzymatic activity by released glucose molecules. Moreover, along with FOS, the higher amount of sucrose and glucose also remains in the enzyme hydrolysate that is undesirable and requires further purification [9]. In contrast, production of FOS by endo-inulinase is a single step process that yields high quality FOS and excludes any further purification steps [10, 11].
Endo-inulinases are found in plants and microbes. Microbial endo-inulinases are preferred over plants as they are easy to cultivate on large scale. Moreover, enzyme yield is higher in microbes than plants. Fungi are the major source of microbial endo-inulinase as they are capable to produce the enzyme in high quantity as compared to bacteria [10]. Although, endo-inulinase activity has been demonstrated in a few fungal species previously [12–20] their potential for producing FOS suitable for nutraceutical applications is yet to be established. Therefore, it is necessary to explore the diverse group of fungi capable of producing endo-inulinase that would help in identifying potential species for large scale production and commercial application of this enzyme.
Intensive laboratory screening of a large number of fungi for endo-inulinase would be an extremely tedious and expensive process. On the other hand, recent progress in the field of computational biology has made it possible to screen unique microorganisms from a population for a particular biological function. Further, the identified organisms can be evaluated at the laboratory to validate the predicted biological function. Several theories and methodologies have been developed previously based on computational methods to characterize microbial enzyme [21] and to study the protein-ligand interactions and drug design through in silico approaches [22–27]. In recent years application of Molecular dynamic (MD) simulations in studying the chemical and biological systems is expanded significantly [28]. The huge application potential has led to implementations of MD in many software packages. GROMACS is one of the widely used application package for MD simulations [28]. The objective of the current study was to identify different fungi capable of producing endo-inulinase enzyme based on the in silico analysis of non-redundant protein sequence database.
Results
Retrieval of protein sequences and homology modeling
A total of 230 protein sequences were retrieved from the NCBI non-redundant protein sequence database that exhibited >90% sequence coverage with the reference endo-inulinase protein sequence of Aspergillus ficuum. The list of the retrieved proteins is provided in the S1 Table that included hypothetical proteins (119), invertase (5), levanase (12), glycosyl hydrolase family 32 proteins (16), β-fructofuranosidase (10), inulinase (25), fructosyltransferase (6), exo-inulinase (18), endo-inulinase (10) and other proteins (9). The retrieved proteins sequences were found to be from 53 fungal species belonging to the genera Aspergillus, Fusarium, Penicillium, Talaromyces, Pseudogymnoascus, Stachybotrys, Phytophthora, Pyrenochaeta, Rhizopus, Mucor, Macrophomina, and Oidiodendron.
The 230 selected proteins were subjected to Swiss homology modeling [29–32] to generate 3D protein models. The models were constructed based on the experimentally characterized template structure. The reference based homology modeling is more appropriate as the predicted models were constructed based on the native template structure. The analysis revealed that out of the 230 selected protein sequences, 100 were modeled as endo-inulinase. Further, it was observed that out of 100, the amino acid sequences of proteins which showed sequence identity >60% with reference endo-inulinase, were modeled as endo-inulinase with good quality QMEAN Z scores [33] of >-3 (Fig 1 & S1 Dataset) The details of sequence identity and QMEAN Z scores of 61 predicted models were presented in S2 Table).
3D models were generated from sequences retrieved from the non-redundant protein sequence database using SWISS-MODEL web server (https://swissmodel.expasy.org/interactive). The model images were created using USCF-Chimera.
The native endo-inulinase like model of these 61 protein models were further corroborated by denovo/abinitio method of protein modeling. The denovo/abinitio protein models were constructed using Bhageerath H (a webserver for homology/ab-initio mode of protein tertiary structure prediction) [34]. The denovo protein modeling also revealed that the predicted models resembles native endo-inulinase like structure (Fig 2. & S2 Dataset). Hence these 61 endo-inulinase like predicted protein models were selected for analyzing and validating different protein qualities.
A- Reference endo-inulinase (3SC7); B- Denovo 3D model of predicted protein from Aspergillus fumigatus resembling native endo-inulinase like structure. The model images were created using USCF-Chimera.
Quality evaluation of predicted 3D protein models
The structural stability and correctness of the 61 predicted protein models selected from homology modeling was evaluated using different protein stability validation modules like Pro-Q, PROSA, PSN-QA, Verify 3D and PROCHECK.
Pro-Q [35] evaluates the model structure by checking the residue wise local quality of a model structure. Pro-Q employs neural network approach which integrates contacts among atoms and residues, solvent accessible surfaces, and secondary structure statistics. Based on the structural features, Pro-Q generates LG-Score and MaxSub score. The quality of the predicted models can be explained based on these scores. Predicted protein model with LG score > 3 and MaxSub score > 0.1 was considered as good quality structures. Pro-Q analysis revealed that all the 61 models exhibited LG score of >4.24 and MaxSub score of >0.34 that indicated their good structural quality (S3 Table).
PROSA [36, 37] diagnoses the protein tertiary structure by matching with the statistics of available experimentally determined structures. This module applies statistics of Cα potentials of mean force to evaluate the quality of predicted protein structures. This module plots Z-scores with its residue energies. Z-scores falling within the range of experimentally determined structures distinguishes native like protein structures from erroneous structures. The ProSA Z-score plots of 61 predicted protein models revealed that the predicted models were within the range of experimentally determined native like protein structures (Fig 3 & S3 Dataset and S3 Table).
The blue color shaded region in the plot corresponds to Z-scores of experimentally determined protein structures characterized by NMR analysis; grey color shaded region corresponds to Z-scores of experimentally determined protein structures characterized by X-Ray diffraction studies. The Z-scores of predicted 3D models falls within the range of experimentally determined native like protein structures.
PSN-QA [38] is a network based approach for the quality analysis of predicted protein models. These networks are constructed using non-covalent interactions between the side chains of the polypeptides. This module assigns a rank to the predicted models based on its closeness to its native like protein structure. PSN-QA rank of predicted models beyond 16 represents native-like conformation and a rank below 10 represents non-native like conformation. PSN-QA rank was found >16 for all the models indicating their native-like conformation except for the hypothetical protein V496_07217 (gb|KFY54637.1) from Pseudogymnoascus sp. where the rank was 15.9 (S3 Table). Verify 3D [39, 40] module evaluates the quality of tertiary structure of the predicted protein by checking the residue wise compatibility of amino acid to the whole protein. This module measures 3D-ID profile scores for each residue. The protein structures are evaluated based on this residue level score for checking the suitability of each residue to its structural environment, defined by the secondary structure, burial position and polarity of positions in a structure. 3D-ID profile score of ≥ 0.2 for a residue, makes it suitable to structural environment. If 80% of amino acid residues in a protein are with 3D-ID profile score ≥ 0.2, then the protein is more likely stable. The analysis of protein tertiary structure of the models using VERIFY-3D tool revealed that 86.9 to 100% of the residues of the models exhibited 3D-1D profile score of ≥0.2 indicating the overall good structural quality of all 61 models (Fig 4 & S4 Dataset and S3 Table).
Plot showing the average 3D-ID score for each residue of A. Aspergillus ficuum reference endo-inulinase and B. Predicted endo-inulinase from Talaromyces verruculosus. The plot and scores are generated using VERIFY 3D webserver (http://servicesn.mbi.ucla.edu/Verify3d/).
The secondary structure of predicted protein models and experimentally characterized endo-inulinase were evaluated by Ramachandran Plot generated through procheck module [41] of ProtSAV server [42]. The Ramachandran Plot depicts that 81.6 to 85.6% of the total residues of the models were found within the most favored, additionally allowed and allowed regions and the respective value was found to be 84.8% for reference native endo-inulinase (Fig 5 & S5 Dataset and S4 Table).
The plots were generated using PROCHECK module of PROTSAV webserver (http://www.scfbio-iitd.res.in/software/proteomics/protsav.jsp).
The above protein validation modules emphasizes that the predicted models are good and reflect native like protein structures.
In silico validation of 3D protein models as endo-inulinase
The structure based sequence alignment of the 3D protein models with the reference native endo-inulinase revealed that the conserved (W-M-N-D(E)-P-N-G), loop1 (P-T(A)-A-N-V-W-G-N) and loop4 (A-V-M-N-S-Y-G-S-N-P) motifs [43] were existed in the respective positions in all the models with minor modifications in the loop1 and loop4 motifs except for the inulinase (dbj|GAO81637.1) from Aspergillus udagawae, where the catalytic glutamate (E43) in the W-M-N-D(E)-P-N-G motif was replaced with aspartate (D) and loop1 motif was not conserved hence excluded from the docking analysis (S6 Dataset; S5 Table). However, the specific amino acid residues T-100, G-196, V-234 and D-298 that are unique to endo-inulinase [43] and critical for its biological activity were found conserved in the positions in all the models (Fig 6 & S6 Dataset and S5 Table).
The Sequences are aligned using webserver (http://bioinformatics.org/strap/aa/).
Docking of kestopentaose (substrate) with the active site around the catalytic residue GLU43, revealed that certain residues play an important role in substrate binding and endo activity of the standard endo-inulinase enzyme from Aspergillus ficuum [43]. In the present study, docking was performed between all the predicted protein models including endo-inulinase from A. ficcum and substrate kestopentaose. The docking results indicated similar interaction between kestopentaose and the active site around the conserved glutamate residue of all the models as described earlier [43]. The information of interacting amino acids and the number of hydrogen bonds formed between the amino acid residues in the active site and the substrate, the binding energy of enzyme-substrate complex are provided in the S6 Table and Fig 7 & S7 Dataset.
The docking was performed using MGL python tool and autodock 4. The interactions and hydrogen bonds formed between the substrate and the active site of enzyme was visualized using UCSF Chimera. The hydrogen bonds formed and their size were indicated in red color.
Molecular Dynamic (MD) simulations and MMPBSA analysis
Molecular dynamic simulations were performed for 9 predicted endo-inulinase models and a reference endo-inulinase (3SC7), docked with kestopentaose substrate, using Groningen Machine for Chemical Simulations (GROMACS) [44, 45] in order to check their stability. The MD simulation revealed that the root mean square distance (RMSD) of protein backbone of enzyme substrate complex and enzyme without substrate, was converged after 4ns of simulation and it is stable for the complete simulation run (Fig 8).
The data was generated using gromacs rms function. A. Protein back bone of enzyme-substrate complex; B. Protein backbone of enzyme without substrate. The plots were made in the work sheet.
Further, it was noticed that there is no considerable variation in the RMSD of protein backbone of enzyme substrate complex and enzyme without substrate. (Fig 8).
Radius of gyration (Rg) explains the compactness of the protein. If a protein is stably folded, it will likely maintain a relatively steady value of Rg. If a protein unfolds, its Rg will change over time. The MD simulation reveals that Rg of protein backbone of enzyme substrate complex and enzyme without substrate are relatively stable and shows no significant variation (Fig 9).
The data was generated using gromacs gyrate function. A. Protein back bone of enzyme-substrate complex; B. Protein backbone of enzyme without substrate. The plots were made in the work sheet.
The last 1ns simulation results revealed that the hydrogen bonding observed between the kestopentaose and amino acid residues of the catalytic subsites of the predicted endo-inulinase models (S7 Table), was similar to those interactions observed with A. ficuum endo-inulinase and kestopentaose, reported earlier [43]. The H-bond information of the enzyme substrate complex of 9 predicted endo-inulinase models and a reference endo-inulinase (3SC7), for first 1ns, last 1ns and for the entire 10ns MD simulation was presented in S8 Dataset.
The trajectories of last 1ns MD simulation were used to calculate the binding free energy of the enzyme-substrate complex using g_mmpbsa package [46,47]. The MMPBSA analysis revealed negative binding energy (S7 Table) of the enzyme substrate complex that indicted the reaction is spontaneous, favorable and requires less energy (S9 Dataset).
Discussion
Endo-inulinase is the enzyme that degrades inulin into short chain FOS that are established as potential prebiotics with health promoting benefits. Although the raw materials for inulin production are inexpensive and readily available from different plant sources, commercial production of FOS from inulin is limited due to inadequate availability of the enzyme [48, 49]. In the current study, attempt was made to identify fungi capable of producing endo-inulinase enzyme based on the in silico analysis of non-redundant protein sequence database. The results indicated the potential of 22 fungal species that can be explored for commercial production of endo-inulinase.
Until now, only the native endo-inulinase of Aspergillus ficuum has been studied and characterized extensively [43]. Hence, the corresponding sequence was used as a reference for retrieving the endo-inulinase like sequences from the non-redundant protein sequence database. A total 230 such sequences belonging to 53 different fungal species could be retrieved and 3D protein models were generated using SWISS-MODEL. The homology models were further confirmed by abinitio/denovo modeling. The structural quality of the generated 3D models were evaluated on the basis of QMEAN Z score, which is a composite scoring function based on different geometrical properties and it provides both global and local quality estimates [33]. The score provides an estimate of the ‘degree of nativeness’ of the structural features observed in a model and indicates whether the model is of comparable quality to the reference template structure. The SWISS-MODEL analysis of the retrieved sequences reveled that only 61 3D models belonging to 23 fungal species conformed to be of good structural quality and resembled as the endo-inulinase like structure. Therefore, these selected 61 models were further analyzed and validated for different protein qualities using Pro-Q, ProSA, PSN-QA, VERIFY-3D and PROCHECK tools.
The quality analyses of the selected 61 3D models using the above tools revealed that all the models were structurally stable and resembled as native like endo-inulinase.
It is established that the conserved W-M-N-D(E)-P-N-G motif, loop1 motif P-T(A)-A-N-V-W-G-N, and Loop4 motif A-V-M-N-S-Y-G-S-N-P form an enlarged cavity, which is critical for endo-activity of endo-inulinase [43]. In addition to these motifs, the residues glutamate (E) in the conserved WMNEPNG motif, threonine (T-100), glycine (G-196), valine (V-234) and aspartate (D-298) are found play a critical role in its activity [43]. Therefore, the selected models were further analyzed using the structure based sequence alignment tool STRAP [50] for the presence of these unique motifs and residues in the selected 3D protein models. The unique residues were found to be conserved in all the models. Similarly, the motifs were found to be conserved in all the models except the inulinase from Aspergillus udagawae. Therefore, it was not included in the further investigation for assessing the likely interaction of the models with the substrate.
Based on the STRAP analysis, 60 models belonging to 22 fungal species were selected to assess the interaction between kestopentaose and the endo-inulinase specific active site through molecular docking. It is reported previously that kestopentaose is a suitable substrate for assessing the enzyme-substrate interaction of endo-inulinase [43]. The docking study revealed a similar kind of interaction between the substrate and subsites of the active site around the conserved glutamate residue for the native endo-inulinase and all the selected protein models, as described earlier for Aspergillus ficuum native endo-inulinase [43]. The stability of the docked complex, the enzyme-substrate interaction and binding energy calculations of 9 predicted endo-inulinase models and a reference model was verified by performing the MD simulation using gromacs [44,45] and MMPBSA analysis using g_mmpbsa package [46,47]. The MD simulation results substantiated the enzyme-substrate interactions observed between the subsites of the catalytic site and the kestopentaose of native endo-inulinase described in the earlier study [43]; while the negative binding energy obtained for enzyme substrate complex using MMPBSA analysis revealed that the complex formation is spontaneous and most favorable. The results verified the selected 60 proteins as endo-inulinase from 22 fungal species. Among 22 species identified in this study, endo-inulinase was experimentally studied and characterized in four species (Table 1).
Although, inulinase from Rhizoctonia sp [19], Rhizomucor pusilis [20], Thermomyces lanuginous [59] and endo-type inulinase from Chrysosporum pannorum [15], Rhizopus sp. Strain TN-96 [16] were identified, their amino acid sequences are not available in the non-redundant protein database, hence not included in the current study.
In conclusion, based on the results of the current in silico study, 22 different fungal species belonging to 10 genera could be identified as endo-inulinase producer. Nevertheless, further biological assessment of their capability for producing endo-inulinase at the laboratory is imminent if they are to be used for large scale endo-inulinase production for application in FOS industry.
Materials and methods
Retrieval of protein sequences and homology modeling
The amino acid sequence of endo-inulinase protein of Aspergillus ficuum (PDB ID 3SC7) was used as reference for retrieving the highly similar (>90% sequence coverage) protein sequences belonging to different fungi from the NCBI non-redundant protein sequence database using pBLAST tool (http://blast.ncbi.nlm.nih.gov/Blast.cgi) [60]
Three-dimensional (3D) protein models of the retrieved sequences were generated using SWISS-MODEL [29–32]. The proteins modeled as endo-inulinase with QMEAN Z score of >-3 were selected for further validation [33]. The models were also generated by denovo/abinitio method using online webserver called Bhageerath H [34] and visualized using UCSF chimera [61].
Protein quality evaluation
The selected 3D models were analyzed and validated for different protein qualities using the tools Pro-Q (residue-wise local quality) [35], ProSA (tertiary structure) [36, 37], PSN-QA (native like structure) [38], VERIFY-3D (amino acid compatibility) [39, 40] and PROCHECK (secondary structure) [41] on PROTSAV server [42].
Structure based sequence alignment and Autodocking analysis
Endo-inulinase contains unique residues and motifs, which confer endo-hydrolysis activity to the enzyme [43]. Therefore, the selected 3D models were validated for the presence or absence of those consensus motifs and residues by using the structure based sequence alignment tool STRAP [50]. Further, the selected endo-inulinase 3D models were docked with kestopentaose (substrate) in the active site around catalytic E-43 residue to assess the likely interaction of the models with the substrate with minimum binding energy. The docking was performed using the methods of AutoDock4 [62, 63].
Molecular dynamic simulations
The docked complexes were subjected to molecular dynamics simulations using the GROningen Machine for Chemical Simulations V4.5.4 (GROMACS) [44,45]. The GROMACS MD simulations was performed based on the methodlogy adopted from Bevans Lab [64] GROMOS96 43a1 force field was applied on 10 docked enzyme-substrate complexes and 10 enzymes without substrate, were placed in the centre of the dodecahedron box solvated in water. Topology files and other force field parameter files for the ligands were created using PRODRG2 server [65]. The docked complex and enzyme were immersed in dodecahedron water box of SPC216 water model. Total negative charges on the docked and enzyme structures were balanced by suitable number of Na+ ions to make the whole system neutral using genion program of GROMACS. The system was initially energy minimized by steepest descent minimization for 50,000 steps. After adding ions the system was again energy minimized by steepest descent minimization retaining the same parameters. The V-rescale, a modified Berendsen thermostat, temperature coupling [66] and Parrinello-Rahman pressure coupling [67] methods were used to keep the system stable at 323 K temperature and pressure of 1 bar. The Particle Mesh Ewald (PME) method [68] was selected to compute long range electrostatic interactions. A cut off distance of 14 Å was set for both Coulombic and van der Waals interactions. Rotational constraint was applied to bonds by LINCS algorithm [69].
MMPBSA anlysis and binding energy calculation
MMPBSA analysis of last 1ns trajectories was performed using g_mmpbsa package (46, 47). The method involves calculation of three energy components: viz., Calculation of potential energy in vacuum, Calculation of polar solvation energy and Calculation of non-polar solvation energy. After calculating the three energy components, the binding energy of the complex can be calculated using a python function.
Supporting information
S1 Dataset. Three-dimensional (3D) models of the selected 61 fungal proteins that resembled as endo-inulinase.
3D models were generated from sequences retrieved from the non-redundant protein sequence database using SWISS-MODEL.
https://doi.org/10.1371/journal.pone.0200607.s001
(ZIP)
S2 Dataset. 61 Three-Dimensional protein models constructed based on denovo/abinitio method using Bhageerath H webserver.
https://doi.org/10.1371/journal.pone.0200607.s002
(ZIP)
S3 Dataset. Protein structure analysis of the selected 61 three-dimensional (3D) protein models using ProSA tool explaining the predicted endo-inulinase 3D models fall within the range of experimentally determined structure.
https://doi.org/10.1371/journal.pone.0200607.s003
(ZIP)
S4 Dataset. VERIFY-3D scores of the selected 61 three-dimensional (3D) protein models explaining the protein structure stability of the predicted endo-inulinase 3D models.
https://doi.org/10.1371/journal.pone.0200607.s004
(ZIP)
S5 Dataset. Ramachandran plots of the selected 61 proteins that resembled as endo-inulinase.
The plots were generated through PROCHECK analysis.
https://doi.org/10.1371/journal.pone.0200607.s005
(ZIP)
S6 Dataset. Structure based sequence alignment of the 60 selected proteins that resembled as endo-inulinase with the reference endo-inulinase from Aspergillus ficuum for identifying unique motifs and residues.
https://doi.org/10.1371/journal.pone.0200607.s006
(ZIP)
S7 Dataset. Interaction between the active site around the conserved glutamate residue and substrate (kestopentaose) of the selected 60 three-dimensional protein models as well as reference endo-inulinase from Aspergillus ficuum.
https://doi.org/10.1371/journal.pone.0200607.s007
(ZIP)
S8 Dataset. Results of molecular dynamic simulations: Hydrogen bond information of enzyme substrate complex of 9 predicted and reference endo-inulinase models generated using GROMACS hbond function.
https://doi.org/10.1371/journal.pone.0200607.s008
(ZIP)
S9 Dataset. Results of g_mmpbsa: Binding energy calculation of enzyme substrate complex of 9 predicted and reference endo-inulinase models generated using g_mmpbsa package.
https://doi.org/10.1371/journal.pone.0200607.s009
(ZIP)
S1 Table. Details of the retrieved protein sequences exhibiting >90% sequence coverage as compared to that of the reference endo-inulinase from Aspergillus ficuum.
The sequences were retrieved from the non-redundant protein sequence database through pBLAST analysis.
https://doi.org/10.1371/journal.pone.0200607.s010
(XLSX)
S2 Table. List of the protein sequences that resembled as endo-inulinase along with QMEAN Z scores.
https://doi.org/10.1371/journal.pone.0200607.s011
(XLSX)
S3 Table. List of the selected 61 protein sequences along with different quality scores obtained through Pro-Q, ProSA, PSN-QA and VERIFY-3D analyses.
https://doi.org/10.1371/journal.pone.0200607.s012
(XLSX)
S4 Table. Results of the Ramachandran plot analysis of the selected 61 protein sequences that resembled as endo-inulinase.
https://doi.org/10.1371/journal.pone.0200607.s013
(XLSX)
S5 Table. Results of the structure based sequence alignment of the 61 selected proteins that resembled as endo-inulinase with the reference endo-inulinase from Aspergillus ficuum for identifying unique motifs and residues.
https://doi.org/10.1371/journal.pone.0200607.s014
(XLSX)
S6 Table. Results of the molecular docking study: The hydrogen bond interaction between the active site around the conserved glutamate residue and substrate (kestopentaose) of the selected 60 three-dimensional protein models as well as reference endo-inulinase from Aspergillus ficuum.
https://doi.org/10.1371/journal.pone.0200607.s015
(XLSX)
S7 Table. Results of last 1ns molecular dynamic simulations and g_mmpbsa calculation of 9 predicted endo-inulinase models and reference endo-inulinase with kestopentaose: Hydrogen bonds formed between the substrate and catalytic subsites of the predicted endo-inulinase and binding energy of the enzyme substrate complex.
https://doi.org/10.1371/journal.pone.0200607.s016
(XLSX)
Acknowledgments
The authors gratefully acknowledge the Council of Scientific and Industrial Research (CSIR); (Sanctioned File No. 09/1158(0002)2K17), Ministry of Science and Technology, Government of India for the senior research fellowship. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Authors gratefully acknowledge the Director, ICAR-NBAIR, Bengaluru-560024 for providing the High Performance Super Computing facility under “Network Project on Agricultural Bioinformatics and Computational Biology” to carry out the molecular dynamic simulations.
References
- 1. Gibson GR, Roberfroid MB. Dietary modulation of the human colonic microbiota: introducing the concept of prebiotics. J Nutr. 1995;125(6): 1401–1412. pmid:7782892
- 2. Roberfroid MB. "Prebiotics: The Concept Revisited". J Nutr. 2007;137: 830S–837S. pmid:17311983
- 3. Gibson GR. Dietary Modulation of the Human Gut Microflora Using the Prebiotics Oilgofructose and inulin. J Nutr. 1999;129: 1438S–1441S. pmid:10395616
- 4. Rastall RA, Gibson GR. Recent developments in prebiotics to selectively impact beneficial microbes and promote intestinal health. Curr Opin Biotechnol. 2015;32: 42–46. pmid:25448231
- 5.
Fructooligosaccharides (FOS) Market Analysis By Source (Inulin, Sucrose) By Application (Food & Beverages, Infant Formula, Dietary Supplements, Animal Feed, Pharmaceuticals) And Segment Forecasts To 2024. Grand View Research. 2016. Available from: http://www.grandviewresearch.com/industry-analysis/fructooligosaccharides-market.
- 6.
Monsan PF, Ouarné F. Oligosaccharides derived from sucrose, In: Charalam popoulos D, Rastall RA, editors. Prebiotics and Probiotics Science and Technology. New York: Springer; 2009. pp. 293–336.
- 7. Pandey A, Soccol CR, Selvakumar P, Soccol VT, Krieger N, Fontana JD. Recent developments in microbial inulinases. Its production, properties, and industrial applications. Appl Biochem Biotechnol. 1999;81(1): 35–52. pmid:10533713
- 8. Mutanda T, Mokoena MP, Olaniran AO, Wilhelmi BS, Whiteley CG. Microbial enzymatic production and applications of short-chain fructooligosaccharides and inulooligosaccharides: recent advances and current perspectives. J Ind Microbiol Biotechnol. 2014;41(6): 893–906. pmid:24793124
- 9. Xu Y, Zheng Z, Xu Q, Yong Q, Ouyang J. Efficient Conversion of Inulin to Inulooligosaccharides through Endo-inulinase from Aspergillus niger. J Agric Food Chem. 2016;64(12): 2612–2618. pmid:26961750
- 10. Singh RS, Singh RP, Kennedy JF. Recent insights in enzymatic synthesis of fructooligosaccharides from inulin. Int J Biol Macromol. 2016;85: 565–572. pmid:26791586
- 11. Liu GL, Chi Z, Chi ZM. Molecular characterization and expression of microbial inulinase genes. Crit Rev Microbiol. 2013;39(2): 152–165. pmid:22734928
- 12. Mutanda T, Wilhelmi BS, Whiteley CG. Response surface methodology: Synthesis of inulooligosaccharides with an endo-inulinase from Aspergillus niger. Enzyme Microb Technol. 2008;43(4–5): 362–368.
- 13. Skowronek M, Fiedurek J. Purification and Properties of Extracellular Endo-inulinase from Aspergillus niger 20 OSM. Food Technol Biotech. 2005;44(1): 53–58.
- 14. Onodera S, Shiomi N. Purification and substrate specificity of endo-type inulinases from Penicillium purpureaogenum. Agric Biol Chem. 1988;52: 2569–2576.
- 15. Xiao R, Tanida M, Takao S. Purification and some properties of endo-inulinase from Chrysosporium pannorum. J Ferment Bioeng. 1989;67(4): 244–248.
- 16. Ohta K, Suetsugu N, Nakamura T. Purification and properties of an extracellular inulinase from Rhizopus sp. strain TN-96. J Biosci Bioeng. 2002;94(1): 78–80. pmid:16233273
- 17. Rawat HK, Ganaie MA, Kango N. Production of inulinase, fructosyltransferase and sucrase from fungi on low-value inulin-rich substrates and their use in generation of fructose and fructo-oligosaccharides. Antonie Van Leeuwenhoek. 2015;107(3): 799–811. pmid:25559021
- 18. Mansouri S, Houbraken J, Samson RA, Frisvad JC, Christensen M, Tuthill DE, et al., Penicillium subrubescens, a new species efficiently producing inulinase. Antonie Van Leeuwenhoek. 2013;103(6): 1343–1357. pmid:23559042
- 19. Neagu Bonciu C, Constantin O, Bahrim G. Increase in extracellular inulinase production for a new Rhizoctonia sp. strain by using buckwheat (Fagopyrum esculentum) flour as a single carbon source. Lett Appl Microbiol. 2012;55(3): 195–201. pmid:22725644
- 20. Flores-Gallegos AC, Contreras-Esquivel JC, Morlett-Chávez JA, Aguilar CN, Rodríguez-Herrera R. Comparative study of fungal strains for thermostable inulinase production. J Biosci Bioeng. 2015:119(4): 421–426. pmid:25454696
- 21. Goswami GK, Mathur N, Pathak AN. In Silico Study of Bacillus brevis Xylanase-Structure Prediction and Comparative Analysis with Other Bacterial and Fungal Xylanase. Biomedical Data Mining. 2015;4: 112.
- 22. Taft CA, Da Silva VB, Da Silva CH: Current topics in computer-aided drug design. J Pharm Sci. 2008;97: 1089–1098. pmid:18214973
- 23. Veselovsky AV, Ivanov AS: Strategy of computer-aided drug design. Curr Drug Targets Infect Disord. 2003;3: 33–40. pmid:12570731
- 24. Jackson RC: Update on computer-aided drug design. Curr Opin Biotechnol. 1995;6: 646–651. pmid:8527834
- 25. Park H, Jeon YH. Toward the virtual screening of Cdc25A phosphatase inhibitors with the homology modeled protein structure. J Mol Model. 2008;14(9): 833–841. pmid:18504625
- 26. Cogan DA, Aungst R, Breinlinger EC, Fadra T, Goldberg DR, Hao MH, et al. Structure-based design and subsequent optimization of 2-tolyl-(1,2,3-triazol-1-yl-4-carboxamide) inhibitors of p38 MAP kinase. Bioorg Med Chem Lett. 2008;18: 3251–3255. pmid:18462940
- 27. Chen X, Zhong S, Zhu X, Dziegielewska B, Ellenberger T, Wilson GM, et al Rational design of human DNA ligase inhibitors that target cellular DNA replication and repair. Cancer Res. 2008;68: 3169–3177. pmid:18451142
- 28. Abraham MJ, Murtola T, Schulz R, Szilard PA, Smith JC, Hess B, et al. GROMACS: High performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX. 2015;1(2): 19–25.
- 29. Biasini M, Bienert S, Waterhouse A, Arnold K, Studer G, Schmidt T, et al. SWISS-MODEL: modelling protein tertiary and quaternary structure using evolutionary information. Nucleic Acids Res. 2014;42(W1): W252–W258.
- 30. Arnold K, Bordoli L, Kopp J, Schwede T. The SWISS-MODEL Workspace: A web-based environment for protein structure homology modeling. Bioinformatics. 2006;22: 195–201. pmid:16301204
- 31. Kiefer F, Arnold K, Künzli M, Bordoli L, Schwede T. The SWISS-MODEL Repository and associated resources. Nucleic Acids Res. 2009;37: D387–D392. pmid:18931379
- 32. Guex N, Peitsch MC, Schwede T. Automated comparative protein structure modeling with SWISS-MODEL and Swiss-Pdb Viewer: A historical perspective. Electrophoresis. 2009;30(S1): S162–S173.
- 33. Benkert P, Kunzli M, Schwede T. QMEAN server for protein model quality estimation. Nucleic Acids Res. 2009;37: W510–W514. pmid:19429685
- 34. Jayaram B, Dhingra P, Mishra A, Kaushik R, Mukherjee G, Singh A, et al. "Bhageerath-H: A homology ab initio hybrid server for predicting tertiary structures of monomeric soluble proteins", BMC Bioinformatics, 2014;15: S7
- 35. Wallner B, Elofsson A. Can correct protein models be identified? Protein Sci. 2003;12: 1073–1086. pmid:12717029
- 36. Sippl MJ. Recognition of Errors in Three-Dimensional Structures of Proteins. Proteins. 1993;17: 355–362. pmid:8108378
- 37. Wiederstein M, Sippl MJ. ProSA-web: interactive web service for the recognition of errors in three-dimensional structures of proteins, Nucleic Acids Res. 2007;35: W407–W410. pmid:17517781
- 38. Ghosh S, Vishveshwara S. Ranking the quality of protein structure models using side chain based network properties. F1000Res. 2014;3: 17. pmid:25580218
- 39. Bowie JU, Luthy R, Eisenberg D. A method to identify protein sequences that fold into a known three-dimensional structure. Science. 1991;253(5016): 164–170. pmid:1853201
- 40. Luthy R, Bowie JU, Eisenberg D. Assessment of protein models with three-dimensional profiles. Nature. 1992;356(6364): 83–85. pmid:1538787
- 41. Laskowski RA. PROCHECK: a program to check the stereo chemical quality of protein structures. J Appl Crystallogr. 1993;26: 283–291.
- 42. Singh A, Kaushik R, Mishra A, Shanker A, Jayaram B. "ProTSAV: A Protein Tertiary Structure Analysis and Validation Server". Biochim Biophys Acta. 2016;1864(1): 11–19. pmid:26478257
- 43. Pouyez J, Mayard A, Vandamme AM, Roussel G, Perpete EA, Wouters J, et al. First crystal structure of an endo-inulinase, INU2, from Aspergillus ficuum: Discovery of an extra-pocket in the catalytic domain responsible for its endo-activity. Biochimie. 2012;94: 2423–2430. pmid:22750808
- 44. Spoel Van der D, Lindahl E, Hess B, Groenhof G, Mark AE, et al. GROMACS: Fast, Flexible and Free. J Comp Chem. 2005;26: 1701–1719.
- 45. Berendsen HJC, Spoel Van der D, Drunen R Van. GROMACS: Amessage-passing parallel molecular dynamics implementation. Comp Phys Comm. 1995;91: 43–56.
- 46. Kumari R, Kumar R; Open Source Drug Discovery Consortium, Lynn A. g_mmpbsa—A GROMACS tool for high-throughput MM-PBSA calculations. J Chem Inf Model. 2014;54: 1951–1962. pmid:24850022
- 47. Baker NA, Sept D, Joseph S, Holst MJ, McCammon JA. Electrostatics of nanosystems: Application to microtubules and the ribosome. Proc Natl Acad Sci. 2001;98: 10037–10041. pmid:11517324
- 48. Kango N, Jain SC. Production and properties of microbial inulinases: Recent advances. Food Biotechnol. 2011; 25(3): 165–212. http://dx.doi.org/10.1080/08905436.2011.590763.
- 49. Flores AC, Morlett JA, Rodríguez R. Inulin Potential for Enzymatic Obtaining of Prebiotic Oligosaccharides. Crit Rev Food Sci Nutr. 2016;56(11): 1893–1902. pmid:25746219
- 50. Gille C, Fahling M, Weyand B, Wieland T, Gille A. Alignment-Annotator web server: rendering and annotating sequence alignments. Nucleic Acids Res. 2014;42: W3–W6. pmid:24813445
- 51. Akimoto H, Kiyota N, Kushima T, Nakamura T, Ohta K. Molecular cloning and sequence analysis of an endoinulinase gene from Penicillium sp. strain TN-88. Biosci Biotechnol Biochem. 2000;64(11): 2328–2335. pmid:11193399
- 52. Nakamura T, Shitara A, Matsuda S, Matsuo T, Suiko M, Ohta K. Production, purification and properties of an endoinulinase of Penicillium sp. TN-88 that liberates inulotriose. J Ferment Bioeng. 1997;84(4): 313–318.
- 53. Onodera S, Murakami T, Ito H, Mori H, Matsui H, Honma M, et al. Molecular cloning and nucleotide sequences of cDNA and gene encoding endo-inulinase from Penicillium purpurogenum. Biosci Biotechnol Biochem. 1996;60(11): 1780–1785. pmid:8987853
- 54. Peng M, Dilokpimol A, Mäkelä MR, Hildén K, Bervoets S, Riley R, et al. The draft genome sequence of the ascomycete fungus Penicillium subrubescens reveals a highly enriched content of plant biomass related CAZymes compared to related fungi. J Biotechnol. 2017;246: 1–3. pmid:28216099
- 55. Ohta K, Akimoto H, Matsuda S, Toshimitsu D, Nakamura T. Molecular cloning and sequence analysis of two endoinulinase genes from Aspergillus niger. Biosci Biotechnol Biochem. 1998;62(9): 1731–1738. pmid:9805373
- 56. Yuan XL, Goosen C, Kools H, van der Maarel MJ, van den Hondel CA, Dijkhuizen L, et al. Database mining and transcriptional analysis of genes encoding inulin-modifying enzymes of Aspergillus niger. Microbiology. 2006;152:3061–3073. pmid:17005986
- 57. Miao Y, Liu D, Li G, Li P, Xu Y, Shen Q, et al. Genome-wide transcriptomic analysis of a superior biomass-degrading strain of A. fumigatus revealed active lignocellulose-degrading genes. BMC Genomics. 2015;16: 459. pmid:26076650
- 58. Gill PK, Manhas RK, Singh P. Comparative analysis of thermostability of extracellular inulinase activity from Aspergillus fumigatus with commercially available (Novozyme) inulinase. Bioresour Technol. 2006;97(2): 355–358. pmid:16171693
- 59. Nguyen QD, Sujto NM, Bujna E, Hoschke A, Rezessy-Szabo JM. Effects of Medium Composition and Process Parameters on the Production of Extracellular Inulinase by Thermomyces lanuginosus. Food Technol Biotechnol. 2013;51(1): 36–44.
- 60. Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. "Basic local alignment search tool." J Mol Biol. 1990;215: 403–410. pmid:2231712
- 61. Pettersen EF, Goddard TD, Huang CC, Couch GS, Greenblatt DM, Meng EC, et al. J Comput Chem. 2004;25(13): 1605–1612. pmid:15264254
- 62. Sanner MF. Python: A Programming Language for Software Integration and Development. J Mol Graphics Mod. 1999;17: 57–61.
- 63. Morris GM, Huey R, Lindstrom W, Sanner MF, Belew RK, Goodsell DS, et al. Autodock4 and AutoDockTools4: automated docking with selective receptor flexiblity. J Comput Chem. 2009;16: 2785–2791.
- 64.
Bevan Lab GROMACS Tutorial- Protein-Ligand Complex. Available online at http://www.bevanlab.biochem.vt.edu/Pages/Personal/justin/gmxtutorials/complex/index.html
- 65. Schuttelkopf AW, Aalten van DMF. PRODRG: a tool for high-throughput crystallography of protein-ligand complexes. Acta Cryst D. 2004;60: 1355–1363.
- 66. Berendsen HJC, Postma JPM, Gunsteren van WF, DiNola A, Haak JR. Molecular-dynamics with coupling to an external bath. J Chem Phys. 1984;81: 3684–3690.
- 67. Martonàk R, Laio A, Parrinello M. Predicting crystal structures: the Parrinello-Rahman method revisited. Physiol Rev Lett. 2003;90: 075503.
- 68. Darden T, York D, Pedersen LG. Particle mesh Ewald: An Nlog(N) method for Ewald sums in large systems. J Chem Phys. 1993;98: 10089–10092.
- 69. Hess B, Bekker H, Berendsen HJC, Fraaije JGEM. LINCS: A linear constraint solver for molecular simulations. J Comp Chem. 1997;18: 1463–1472.