The images for Figs 6 and 7 are incorrectly switched. The image that appears as Fig 6 should be Fig 7 and the image that appears as Fig 7 should be Fig 6. The figure captions appear in the correct order. Please view the correct figures below.
Red lines indicate arms of the fibre starting from the centre of the fibre mass. The angle between the red lines was measured to assess flexibility. The time interval between frames is t = 0.25 s.
a) Plot of the mean square displacement of a filament of contour length 21.5 μm as a function of lag time. The upper two plots are MSDs along the a and b axes in terms of μm2, whereas the bottom one is the angular MSD in terms of mrad2. b) Angle between arms of the bending filament as a function of time. c) Length of left and right arm of the bending filament, and distance between both ends of the arms. All plots present calculations for the nanofilament No. 1 from Table 1.
Citation: Nakielski P, Pawłowska S, Pierini F, Liwińska W, Hejduk P, Zembrzycki K, et al. (2015) Correction: Hydrogel Nanofilaments via Core-Shell Electrospinning. PLoS ONE 10(7): e0133458. https://doi.org/10.1371/journal.pone.0133458
Published: July 20, 2015
Copyright: © 2015 Nakielski et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited