The reference annotations made for a genome sequence provide the framework for all subsequent analyses of the genome. Correct and complete annotation in addition to the underlying genomic sequence is particularly important when interpreting the results of RNA-seq experiments where short sequence reads are mapped against the genome and assigned to genes according to the annotation. Inconsistencies in annotations between the reference and the experimental system can lead to incorrect interpretation of the effect on RNA expression of an experimental treatment or mutation in the system under study. Until recently, the genome-wide annotation of 3′ untranslated regions received less attention than coding regions and the delineation of intron/exon boundaries. In this paper, data produced for samples in Human, Chicken and A. thaliana by the novel single-molecule, strand-specific, Direct RNA Sequencing technology from Helicos Biosciences which locates 3′ polyadenylation sites to within +/− 2 nt, were combined with archival EST and RNA-Seq data. Nine examples are illustrated where this combination of data allowed: (1) gene and 3′ UTR re-annotation (including extension of one 3′ UTR by 5.9 kb); (2) disentangling of gene expression in complex regions; (3) clearer interpretation of small RNA expression and (4) identification of novel genes. While the specific examples displayed here may become obsolete as genome sequences and their annotations are refined, the principles laid out in this paper will be of general use both to those annotating genomes and those seeking to interpret existing publically available annotations in the context of their own experimental data.
Citation: Schurch NJ, Cole C, Sherstnev A, Song J, Duc C, Storey KG, et al. (2014) Improved Annotation of 3′ Untranslated Regions and Complex Loci by Combination of Strand-Specific Direct RNA Sequencing, RNA-Seq and ESTs. PLoS ONE 9(4): e94270. https://doi.org/10.1371/journal.pone.0094270
Editor: Thomas Preiss, The John Curtin School of Medical Research, Australia
Received: October 30, 2013; Accepted: March 13, 2014; Published: April 10, 2014
Copyright: © 2014 Schurch et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: Kate G. Storey and Junfang Song are supported by MRC (www.mrc.ac.uk) grant (G1100552). Sara J. Brown is supported by a Wellcome Trust (www.wellcome.ac.uk) Intermediate Clinical Fellowship (086398/Z/08/Z) and funding from the National Childrenâ€™s Research Centre Dublin (http://www.nationalchildrensresearchcentre.ie/). The authors are grateful to the Tayside Tissue Bank (tissuebank.dundee.ac.uk) for help in obtaining the human skin sample. CÃ©line Duc and Gordon G. Simpson are supported by the BBSRC (www.bbsrc.ac.uk) (BB/H002286/1) and Scottish Government. Christian Cole is supported by Wellcome Trust (www.wellcome.ac.uk) Grant (92530/Z/10/Z). Geoff Barton acknowledges support from Wellcome Trust (www.wellcome.ac.uk) Strategic Grants (100476/Z/12/Z) and (097945/Z/11/Z). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
There are two key features to a genome: the underlying sequence made up of the four nucleic acids (A, C, G, T), and its annotation. The majority of applications of a genome sequence rely on the gene structures and associated features provided by the reference genome annotation. Methods to annotate a newly sequenced genome are well developed and exploit both data-driven and ab initio feature prediction , , but annotation is always derived from a snapshot of knowledge at the time it is carried out. As new data become available, the annotation must be revised if it is to remain relevant and useful (e.g. –). Annotation projects for the most complete and well described metazoan genomes: human; mouse and zebrafish, combine automatic methods with manual curation to provide an authoritative annotation that is regularly updated by incorporating new experimental data (e.g. ). The reference annotations for most other genomes rely more heavily on fully automatic annotation with limited manual curation. Since the structure of the gene transcript can vary according to cell type, treatment and other stimuli, the annotation that is most relevant may need to be re-defined for each set of experimental conditions. Advances in short-read, high-throughput transcript sequencing (RNA-seq) and its use in differential expression analysis have highlighted the importance of accurate gene models and prompted the development of methods to carry out experiment-specific predictions of gene structure (e.g. see , –). However, conventional RNA-seq experiments often do not define the ends of genes with high precision. Incorrect assignment of the 5′ and 3′ UTRs may cause reads in an RNA-seq experiment to be assigned to intergenic regions and so give erroneous estimates of gene expression. Furthermore, the short read length may not provide evidence for an unambiguous gene structure where there are overlapping genes, while RNAseq data that are not strand-specific are complex to apply in areas where genes overlap.
Recently, techniques have been developed that allow sites of cleavage and polyadenylation at the 3′-end of transcripts to be identified in a high-throughput manner. These include 3P-Seq which has been applied to the characterisation of 3′UTRs in C.elegans  and zebrafish  and Helicos Bioscience's single-molecule direct RNA sequencing (DRS)  which has been applied to large-scale 3′UTR studies in human  A. thaliana , and yeasts , . DRS  captures RNA by the poly(A) tail and sequences the RNA immediately adjacent, so giving a very clear read-out of the transcript's 3′-end. DRS is strand-specific, has no amplification step, is less susceptible to internal priming than other methods and since it sequences RNA not DNA, does not require reverse transcription and the artefacts that can generate.
DRS has already been used in an automatic protocol to re-annotate the 3′-ends of over 10,000 protein coding genes in A. thaliana of which more than 3,400 were extended by at least 10 nt. . Prior to the introduction of high-throughput sequencing technologies, expressed sequence tag (EST) libraries were commonly used to inform and validate gene models. Large libraries were produced since each tag only gave information about parts of a gene. Despite their size, EST libraries were often incomplete and error-prone due to PCR and reverse transcriptase artefacts. In contrast, RNA-seq datasets cover the vast majority of the transcriptome, but are based on shot-gun sequencing which requires reconstruction of the short reads. Typically, RNA-seq data does not retain strand information of the parent mRNA molecule.
In this study the potential of combining DRS with conventional RNA-seq, small RNA-seq (sRNA-seq) and archival expressed sequence tag (EST) data for genome annotation in human, chicken and A. thaliana is explored. Combining DRS, RNA-seq, EST and sRNA-seq data promises to mitigate the limitations of each individual technology; providing multiple, orthogonal, sources of evidence for gene intron/exon structure, 3′ UTR regions and mature small RNAs and microRNAs, even in complex genomic regions.
Materials and Methods
In this paper, data from the authors' own laboratories were combined with data from public archives. The findings in this study are based on data produced from multiple collaborations and the choice of species reflects the data available rather than a specific design. The source of all data presented here is described below.
Gallus gallus (chicken) DRS Data
Pre Neural Tube (hereafter PNT) explants were dissected from Hamburger and Hamilton stage 10, 10 to 12 somite chick embryos (). The explant was taken from a region rostral to the node and at a two presumptive somite distance from the last somite formed (somite I). The notochord was removed by controlled trypsin digestion aiming to keep the neural ventral midline. Dissections were carried out in L15 medium at 4°C and explants were taken for RNA extraction and DRS sequencing from three individual embryos (biological replicates).
RNA Extraction & Quality Testing.
All surfaces and dissecting tools were treated with RNAZap (Ambion) and rinsed with DEPC-treated water. RNA was extracted from the three PNT explants in Trizol reagent (Invitrogen) by phase separation with chloroform, followed by precipitation with isopropanol and linear acrylamide. The RNA was washed in 70% ethanol, air-dried, re-suspended in DEPC-water and frozen in liquid nitrogen. Total RNA was quantified and quality tested using the Agilent RNA assay (Agilent Bioanalyser pico RNA chip) by Helicos Biosciences. Samples with a RIN number above 8.0 were selected, and were then sequenced by DRS (), producing 7.2–16.4 million raw reads per sample.
DRS Data Processing.
Raw DRS reads from each sample were mapped to v2.1 of the chicken genome (Galgal3) with Helicos Biosciences' open-source mapping pipeline Helisphere (v2.0.022410) with the default parameters. The mapped reads were then filtered with four additional selection criteria to remove as much noise from the data as possible. Only reads with unique, high-quality, mappings to the genome (both locally and globally) were accepted. DRS sequencing technology is prone to producing reads that require a large number of insertions or deletions (in-dels) to align to the genome (, ). Accordingly, to minimise ambiguity, only reads whose best-match alignments contained fewer than four indels, and whose read length was greater than 25 bases were accepted. Finally, all reads that map to any positions in the genome with fewer than 3 reads coverage per replicate were discarded. This threshold was chosen chose to require at least three reads at a given genomic position in each of three replicates, ensuring that the retained peaks were reproducible across the three replicates and that they had a total signal-to-noise ratio (based on Poisson counting statistics) of < = 3.
Based on the existing chicken genome annotations from Ensembl, this resulted in a total of ∼5,178 Ensembl genes with measured expression in all three PNT DRS replicate datasets. Data are available from www.compbio.dundee.ac.uk/polyadb and will be deposited at the European Nucleotide Archive.
Gallus gallus Illumina RNA-seq Data
The publicly available chicken Illumina RNA-seq data discussed here forms part of a study that examined gene expression in mammalian organs (Short Read Archive study: SRP007412 GSE30352 - ). This study used the Illumina Genome Analyser IIx platform to generate 76 bp reads for six tissues (brain - cerebral cortex or whole brain without cerebellum, cerebellum, heart, kidney, liver and testis) from one male and one female per somatic tissue (two males for testis). Data for the chicken were generated for this mammalian-focussed study as an evolutionary outgroup. The data were downloaded from the Short Read Archive, converted to fastq format with the SRA toolkit (v2.1.10, http://www.ncbi.nlm.nih.gov/Traces/sra/sra.cgi?view=software). The reads in each dataset were then aligned to v2.1 of the chicken genome (Galgal3) with the splice-aware alignment software TopHat (v2.0.0, http://tophat.cbcb.umd.edu/ - ) in conjunction with Bowtie (v2.0.0 beta5, http://bowtie-bio.sourceforge.net/index.shtml - ), with the —coverage-search, —microexon-search and —b2-very-sensitive options in addition to the TopHat defaults. Combined, the twelve samples total ∼251 M reads, 64% (∼161 M reads) of which map to the genome using these settings. Remapping to Galgal4 raised the total proportion of mapped reads to 69% but did not significantly affect the annotation examples shown in this paper.
Homo sapiens skin DRS data
A clinically normal human skin sample was obtained by 4 mm punch biopsy of skin tissue removed during plastic surgical procedures from the abdomen of an adult female, with approval from the local Research Ethics Committee, under the governance of Tayside Tissue Bank. The biopsy sample was snap frozen in liquid nitrogen and stored at -80°C. The specimen was disrupted and homogenised using a TissueLyser (Qiagen TissueLyser LT, Qiagen, UK) at 50 oscillations per second for 5 minutes at 4°C. Total RNA (>200 nt in length) was extracted using the Qiagen RNeasy Mini Kit according to manufacturer's protocol and stored at −80°C prior to RNA sequencing. Sequencing was performed as previously described ().
DRS Data Processing.
The raw sequence data was aligned to the GRCh37 release of the human genome with the open source HeliSphere package (version 1.1.030309). Specifically indexDPgenomic was run with the following parameters set: —best_only —min_norm_score 4.0 —strands both —alignment_type GL the remainder were kept to their defaults. Aligned data were filtered with filterAlign in order to return only unique alignments from reads at least 25 bp in length (∼7 M reads remaining). Further filtering was applied with in-house scripts to remove reads with indels larger than four bases and singleton positions where only one read was found, leaving 4,974,304 DRS reads for further analysis. The data are available from www.compbio.dundee.ac.uk/polyadb and will be deposited in the European Nucleotide Archive.
Homo sapiens Illumina RNA-seq Data
A publicly available dataset was downloaded from the Short Read Archive (Accession: SRX084679). As no skin sample data was available, these data were from normal human epidermal keratinocyte (NHEK) whole cells. The polyA+ purified RNA was sequenced as 76 bp paired-end reads resulting in 46.4 M read pairs in sample SRR315327.
All the reads were then aligned to the GRCh37 release of the human genome with TopHat (v2.0.0) with the —coverage-search, —microexon-search and —b2-very-sensitive options set in addition to the TopHat defaults. Of the 46.4 M read pairs, 93.3% (43.3 M pairs) aligned to the genome using these settings.
Homo sapiens sRNA-seq Data
Publically available data from a normal skin biopsy sample was downloaded from the Short Read Archive (Accession: SRX091761 . The accession contains one sample (SRR) of ∼21 M 36 bp single-end reads prepared via the Illumina small RNA-seq protocol. The raw reads were quality clipped, had their adapter sequences removed and any remaining reads shorter than 16 bp were discarded as previously described . The remaining 18,722,725 reads were collated as 788,334 unique sequences for alignment to the genome. The sequences were aligned to the GRCh37 release of the human genome with bowtie v0.12.3 (parameters: -a —best —strata -v 1). Bowtie was chosen, rather than bowtie2, as it is more suitable for small RNA-seq where gaps are of less relevance and reads are <50 bp in length.
Arabidopsis thaliana DRS data
A. thaliana WT Col-0 seeds were sown in MS10 plates, stratified for 2 days at 4°C and grown at a constant temperature of 24°C under 16 h light/8 h dark conditions. 14 days old seedlings were harvested. Total RNA was purified using an RNeasy kit (Qiagen). No subsequent poly(A) of the RNA was performed and further procedures in preparation or sequencing were carried out as described in .
Raw DRS sequences were aligned by the open-source HeliSphere package (version 1.1.498.63), to the TAIR10 release of the A. thaliana genome. The indexDPgenomic aligner was run with seed_size = 18, num_errors = 1, weight = 16, best_only = 1, max_hit_duplication = 25, percent_error = 0.2; read_step = 4, min_norm_score = 4.2, and strands = both options. Globally non-unique alignment hits were discarded and one hit selected at rand if there were several non-unique local hits found in a genetic region. Reads with more than four indels were discarded and read alignments refined by an iterative multiple alignment procedure while DRS reads containing low complexity genomic regions, as identified by DustMasker from the Blast+ 2.2.24 package, were discarded, as previously described . These additional filters reduced the fraction of potentially incorrect alignments The data have been deposited European Nucleotide Archive (ENA): Study, PRJEB3993; accession no, ERP003245.
Arabidopsis thaliana RNA-seq data
RNA-seq reads available in the accession SRR394082 were taken from the European Nucleotide Archive. These reads were generated from total RNA extracted from 10 day-old seedlings of A. thaliana (Columbia-0 ecotype) and sequenced by Illumina HiSeq 2000. All details of material preparation are described in . The 51.8 M raw reads length of 50 bp were aligned with the splice-aware alignment software TopHat v2.0.0 (this version of TopHat uses Bowtie v2.0.0 beta5) with the —b2-very-sensitive option in addition to the TopHat default options against the TAIR10 release of the A.thaliana genome. The total number of uniquely aligned reads was 48.8 M (94.2% of the raw reads).
Arabidopsis thaliana small RNA-seq data
Publicly available small RNA-seq data were taken from the European Nucleotide Archive (accession number is SRR167709). Total RNA for these data was extracted from immature flowers of wild-type A. thaliana (Columbia-0 ecotype), processed with Illumina Small RNA Sample Prep Kit and sequenced with HiSeq 2000 (Illimuna). The RNA extraction and sequencing procedures are described in detail in . The accession consists of 34.2 M of 36 bp non-aligned reads. The raw reads were quality-clipped, had their adapter sequences removed and remaining reads shorter than 16 bp were discarded as previously described . The remaining 12.7 M reads were collated as 6 M unique sequences for alignment to the genome. The sequences were aligned to the TAIR10 release of the A. thaliana genome with bowtie v0.12.3 (parameters: -a —best —strata -v 1).
Arabidopsis thaliana EST data
The A. thaliana EST data available in IGB were taken from the PlantGDB resource which aggregates the EST sequences from GenBank's nucleotide database and splits them by species. The sequences used here are from GenBank version 187. They can be downloaded in fasta format from ftp://ftp.plantgdb.org/download/FASTA_187/EST/Arabidopsis_thaliana.mRNA.EST.fasta
In this work, the definitions of ‘gene’ and ‘gene-associated regions’ (GARs) as suggested by Gerstein and colleagues  are followed. The results are divided into four sections where the major strengths of combining DRS data with other high-throughput transcriptomics data are highlighted by nine examples of feature re-annotation of genes and their GARs. Section 1 focusses on how the broad-coverage of RNA-seq and EST data help to bridge the gap between existing annotations and the DRS read data, enabling improved annotation of transcribed, polyadenylated regions. Section 2 illustrates how the positional specificity and native stranded-ness of DRS data enable re-annotation of complex genomic regions, without which the RNA-seq data could not be used effectively either for re-annotation or further downstream analysis. Section 3 examines the synergy between standard RNA-seq, DRS and sRNA-seq data in providing a more complete picture of non-coding RNA expression than any of these datasets can provide individually. Section 4 briefly considers the potential for combined data to enable the discovery of new genes.
Section 1: Gene and 3′ UTR re-annotation by combining DRS and RNA-seq data
A simple example: Chicken BMPR1A.
The chicken genome sequence and gene models based on EST data were first released in 2004 (International Chicken Polymorphism Map) with a second, more complete revision (v2.1) released 2006. A draft update to v2.1 was released in 2012, but this is yet to be annotated fully. Accordingly, most current research relies on v2.1 and its annotations and does not take account of evidence from DRS experiments.
Figure 1 shows the genomic context and information sources around BMPR1A, a gene important in development (F1P3H0_CHICK, ENSGALG00000002003; –). The annotation of this gene and its GARs differ between Ensembl and RefSeq. Ensembl presents a single gene model and two short novel protein coding models. The canonical transcript (ENSGALT00000003119, see Table 1) covers 39,530 bp with twelve exons of 100298 bp, and an associated 228 bp 3′ UTR. In contrast, the RefSeq annotation covers 39,340 bp, including a 21 bp longer first exon and a 17 bp shorter 3′ UTR. Although the basic gene intron/exon structure and the 5′ UTR are annotated in Ensembl/RefSeq, no 3′ UTR is present in the RefSeq annotation and the 3′UTR is short in the Ensembl annotation. There is no peak in the DRS data at the end of either the RefSeq or Ensembl 3′ UTR, but there are four peaks ∼1.45, 1.9, 2.4 & 4.2 kb downstream of the existing Ensembl annotation (Figure 1, Track A, 1–4, respectively). These peaks all have canonical AATAAA poly(A) motifs (≤1 mismatch) located 15–22 bp upstream suggesting they are genuine poly(A) sites, however the DRS data alone do not reveal which, if any, of these sites should be associated with BMPR1A.
Figures 1–8 are divided into three regions comprising information located on the forward strand (pink), reverse strand (grey) and un-stranded information (yellow). Each region is subdivided into tracks showing a selection of the different annotations/datasets described below. For clarity, tracks are omitted where the track contains no data in the region shown. Tracks A & K: Histograms for forward (A) and reverse (K) strands computed by summing the number of uniquely aligned DRS reads that end at a position and presented in units of read-counts/base. Tracks B & J: Filled rectangles show forward (B) and reverse (J) strand individual EST alignments for a selection of the total EST coverage. Individual EST alignments that span across an implied exon splice junction are illustrated by a split bar representing the sequenced EST joined by a thin line that spans the implied intron. Tracks C & I: Additional annotation information for forward (C) and reverse (I) strands. This track shows annotation information that doesn't originate from a primary reference database for the species. Details of the specific annotations shown for each figure are given in the figure caption. Tracks D & H: Primary database annotations labelled with the database primary identifier for forward (D) and reverse (H) strands. Multiple gene models are shown where appropriate. Exons are shown as thick bars, UTRs as thinner bars and introns as thin lines. For A. thaliana this track shows the TAIR (v10) annotations. For the other examples in this paper, this track shows Ensembl (v69, red) and RefSeq (v191, green) annotations. Track E: Unstranded RNA-seq read depth histogram, computed by summing the number of uniquely aligned reads that cover at any given position and expressed in read counts/base. Track F: RNA-seq individual read alignments, for a selection of the total read depth, shown as filled rectangles. Individual read alignments that span across an implied exon splice junction are represented by a split bar representing the sequenced read joined by a thin line showing the implied intron. Track G: Unstranded sRNA-seq read depth histogram, computed by summing the number of uniquely aligned sRNA-seq reads that cover at any given position and expressed in units of read-counts/base. Figure 1 shows a ∼57 kb region of G. gallus, chromosome 6, including BMPR1A (ENSGALT00000003119) and illustrates a straight-forward gene re-annotation, where the RNA-Seq and DRS data combined are sufficient to define the extent, structure, and alternative polyadenylation positions for a gene. Tracks C & I show confirmed complete coding sequence mRNA data for the region (GenBank v191 - orange) and the locations of the Affymetrix chicken GeneChip microarray probe-sets (black markers), and the cDNA against which the Affymetrix probe-sets were designed (light blue). See the Materials and Methods section for more details on the generation and processing of the G. gallus RNA-seq and DRS data-sets. The EST data (B & J) are from . The DRS track for the reverse strand (Track H) contains no data in the region shown and has been removed for clarity.
EST and RNA-seq data can provide a bridge between the Ensembl/RefSeq annotations and the DRS data. Despite their low depth, the G. gallus EST data show almost continuous coverage between the end of the 3′ UTR annotated in Ensembl and the most 3′ DRS peak. However, the EST data are not conclusive; there is a 400 bp gap in the EST coverage and the implied exon structure is inconsistent with the existing annotations. The addition of publically available RNA-seq data () strengthens the confidence that the DRS peaks correspond to the 3′-end of BMPR1A. The RNA-seq data cover the proposed 3′ UTR and finish 1 bp beyond the fourth DRS peak. The RNA-seq data also confirm the exon/intron structure of the existing gene annotations.
Although the RNA-seq data are non-uniformly distributed, there are only three places in the proposed 3′ UTR where the read depth drops to zero. In all three examples, there is good supporting evidence from overlapping ESTs that these gaps are unlikely to represent the end of the gene. The combination of DRS, EST and RNA-seq suggests the BMPR1A gene in G. gallus should be re-annotated as shown in Table 1. The new annotation indicates four alternative poly(A) sites exist in the developing chicken embryo, but there is no evidence to support the two short novel protein coding models Ensembl also provide as annotations for this gene.
Complex, ambiguous, feature re-annotations: Chicken HOXA7. The re-annotation of BMPR1 was comparatively straightforward because the different datasets reinforce each other. A more complex and ambiguous re-annotation is illustrated in Figure 2 for the HOXA7 gene (ENSGALG00000011061, ). The Ensembl annotation has a single transcript that covers 1,702 bp and includes two exons (280 and 285 bp) and a short (36 bp) 3′ UTR. In contrast, the RefSeq annotation covers 1,837 bp, includes three exons (278, 283 & 41 bp respectively) and has no defined 3′ UTR.
The individual tracks and layout of this figure are as described in Figure 1. Figure 2 shows a ∼6 kb region of G. gallus, chromosome 2 that encompasses HOXA7 gene. The RNA-seq (Tracks E & F), Helicos BioSciences' DRS (Tracks A & K) and publically available EST (Tracks B & J) datasets for this region are ambiguous, but combined, the data clearly define the extent, and structure for this gene. Tracks C & I show the same additional annotation tracks as shown in Figure 1. See the Materials and Methods section for more details on the generation and processing of the G. gallus RNA-Seq and DRS data-sets. EST data were taken from .
The intron/exon structure of HOXA7 shown in Figure 2 appears to be simpler than BMPR1A. However, the DRS, EST and RNA-seq datasets suggest this gene may have a more complex structure than defined in Ensembl/RefSeq. Multiple peaks are evident in the observed DRS dataset (Figure 2, Track K, 1–6) that mark potential poly(A) sites associated with HOXA7. The first peak (1) lies within the intron separating the two primary exons of the gene. The second peak (2) is composed of three smaller peaks that all lie within 30 bp of the end of the existing Ensembl annotation. On the surface, these appear to support the existing 3′ UTR annotation, but the presence of a large peak in the DRS data 1.5 kb downstream (6), if genuinely associated with HOXA7, suggests an alternative annotation that would not only extend the 3′ UTR, but would also be the dominant transcript in the DRS dataset for this gene. Peak 6 shows a canonical AATAAA poly(A) motif 19 bp upstream, consistent with a genuine poly(A) site. Peaks 2–5 show long runs of adenosine bases immediately downstream of each peak, suggesting that they might be the result of internal priming while peak 1 shows neither of these features and it remains unclear whether it is a true site of alternative polyadenylation.
In a similar fashion to the example shown in Figure 1 (Section 1.1), both the EST and RNA-seq data bridge the gap between DRS peak 6 and the existing reference annotations. Together, these data support the proposed 3′ UTR re-annotation, despite the EST data including a 500 bp region where the coverage is low (≤2 ESTs) and from an inferred exon structure that is inconsistent with the existing annotation.
While the RNA-seq data support the proposed 3′ UTR re-annotation, they do not match the short initial exon present in the RefSeq annotation and the EST data. The genomic sequence in the 31 bp intron between the first and second exons in the RefSeq annotation is marked as ‘N’s in the genomic sequence, making it difficult to draw robust conclusions on the structure of the gene in this region. Although this exon annotation is broadly supported by the EST dataset, these data extend beyond the RefSeq annotation suggesting a potential re-annotation of the 5′ UTR.
This example shows considerable non-uniformity in the RNA-seq data that map to the suggested 3′ UTR, with several significant (>50 bp) gaps in the RNA-seq coverage. The EST coverage and the lack of known polyadenylation motifs in the genomic sequence surrounding these gaps suggest that these are artefacts intrinsic to the Illumina RNA-seq protocol and do not represent the end of the 3′ UTR associated with HOXA7.
Accordingly, a re-annotation of the HOXA7 gene in G. gallus (Table 2) based on the combination of DRS, EST and RNA-seq data is proposed. The annotation broadly supports the existing intron/exon structure of the RefSeq annotation, but extends the 3′ UTR by 1.5 Kb and suggests an alternative polyadenylation site. The presence of the first intron is not strongly supported by the RNA-seq data and may well be spurious or an extension of the larger second exon, or specific to a particular tissue type or biological condition not sampled by the RNA-seq experiment.
Since completion of this study, the Galgal3 genome has been superseded by Galgal4 (released in Nov 2011) and its corresponding annotations (ensembl v71 and later, Apr 2013). Despite the undoubted improvements this new version has made to the genome as a whole, the gene models for both BMPR1A and HOXA7 have not changed significantly and our proposed reannotations for these genes remain pertinent for the latest Galgal4 annotations (ensembl v74).
Gene and 3′ UTR re-annotation for Homo sapiens SLFN5.
Although the human genome is actively curated, gene models can still be revised with new data. For example, SLFN5 in H. sapiens until recently had a significantly truncated 3′ UTR. Prior to v69 (Oct 2012), the SLFN5 Ensembl annotation was composed of two alternative gene models; one covering 4,625 bp spanning 4 exons, and the other covering 2,540 bp spanning 3 exons. The RefSeq annotation contained a single gene model covering 4,654 bp spanning 4 exons. All these annotations included a short 5′ UTR encompassing a long intron and a well-defined 1.8 kb 3′ UTR. In the v69 Ensembl release, the annotations for SLFN5 changed considerably. The 3′ UTR for the primary transcript was extended by ∼6 kb and a third, shorter gene model was added. To date (Feb 2013), there has been no change in the RefSeq annotation for this gene. Figure 3 shows the genomic context around SLFN5 with the most recent annotations from Ensembl and RefSeq. Both the DRS and RNA-seq data show evidence for transcription continuing up to ∼6 kb further downstream than the current RefSeq annotation, and in agreement with the current Ensembl annotation. However, the DRS data reveals two alternative polyadenylation sites ∼5 kb and ∼8.5 kb (Figure 3, Track A, 1–2, respectively) from the first stop codon in SLFN5, both of which have the canonical AATAAA cleavage and polyadenylation signal upstream (19 & 24 bases, respectively) of the DRS peak. One of these sites is coincident with the Ensembl gene model, but the second site suggests a fourth alternative gene model. The combination of the DRS and RNA-seq data suggests the SLFN5 gene in H. sapiens should be re-annotated as described in Table 3.
This figure shows a ∼6 kb region of H. sapiens, chromosome 17, that encompasses the recently re-annotated SLFN5 gene. Two peaks in the DRS data for this region (Track A) reveal that even our most up-to-date annotations in heavily curated genomes are often incomplete. The difference between the annotations provided by RefSeq and Ensembl (Track D) also highlights that existing primary database annotations often disagree significantly, making downstream analysis results dependent of the reference database used for individual studies. For full details of the individual tracks and layout of this figure, see the legend to Figure 1. See the Materials and Methods section for more details on the generation and processing of the H. sapiens RNA-seq and DRS data-sets.
Extension of 3′ UTR for A. thaliana: AT4G02715.
The genome of A. thaliana has been extensively studied since it was sequenced and released in 2000 (). However, examination of the first DRS data for A. thaliana  enabled the 3′-ends of ∼65% of its genes to be re-annotated automatically by considering reads within 300 bp of the TAIR10 annotated 3′-end. Sherstnev et al  only considered DRS data and this approach missed further re-annotation possibilities. For example, Figure 4 summarises the region around AT4G02715. The TAIR 10 annotation for this gene consists of a 0.6 kb 5′-UTR containing a single intron followed by a single 0.6 kb exon. No significant DRS peaks are found within the 300 bp window downstream of the 3′ end of the current annotation and so the algorithm described in  did not re-annotate the 3′ end of this gene. A cluster of DRS signals is observed ∼0.6 kb downstream (Figure 4, Track K, 2) followed by a set of peaks ∼0.65 kb further downstream (Figure 4, Track K, 3) and another cluster of peaks ∼0.25 kb still further downstream (Figure 4, Track K). The RNA-seq data covers the full extent of the downstream region up to DRS peak 3. Like many poly(A) sites in Arabidopsis, peak 3 is composed of at least four peaks of varying strength, several of which are broader than the ±2 bp positional accuracy of the DRS data . The RNA-seq data also identify an intron ∼1 kb upstream of the end of the current annotation. The protein coded by AT4G02715 has yet to be characterized and the current annotation represents the longest ORF in this genomic region, suggesting that the proposed extension reflects the 3′ UTR of this gene. The RNA-seq data show weak expression extending out to within a few bases of peak 4, but the unmatched nature of the DRS and RNA-seq samples makes it difficult to draw strong conclusions about the nature of this region. It is possible this region is an alternative transcript for AT4G02715 that is not expressed in the archival RNA-seq dataset.
A ∼3 kb region of A. thaliana on chromosome 4 is shown, which encompasses AT4G02715. In this case the extensive 3′ UTR extension suggested by the DRS data (Track K) shows how this re-annotation was missed even by the automated re-annotation algorithm applied in . For full details of the individual tracks and layout of this figure, see Legend to Figure 1. See the Materials and Methods section for more details on the A. thaliana RNA-seq, EST and DRS data-sets, and their processing.
Table 4 shows the proposed re-annotation of AT4G02715 in A. thaliana based on the RNA-seq and DRS data. In the new annotation, the DRS data describes the primary gene transcript and tentatively suggests the presence of alternative transcripts.
A. thaliana: AT1G68945 – annotation and data inconsistent.
Figure 5 shows AT1G68945 which has been confirmed as protein coding from cDNA and EST data, although the protein product has yet to be characterized. It has only one annotated gene model, comprising a long 5′ UTR, a single coding exon, and a short 3′ UTR. No significant DRS peaks are found associated with this gene model or within the 300 bp window downstream of the 3′ end of the current annotation and so the algorithm described in  does not re-annotate this gene and leads to the conclusion that it is not expressed. Curiously however, a strong signal is seen in the DRS data on the opposite strand, at the start of the 5′ UTR annotation. This peak is broad, covering ∼20 bp, suggesting multiple possible poly(A) sites. Reads from the un-stranded RNA-seq data align precisely to the gene position confirming its location but not which strand it is on. One possible interpretation of this region is that there is a gene on the reverse strand that is not annotated in TAIR10 (as suggested in Table 5) this is also supported by single-stranded RNA-Seq data from the Ecker Lab . However, the reverse strand in this region of the current genome build contains multiple stop codons suggesting it is unlikely to represent a single protein coding gene.
This figure shows a ∼600 bp region of A. thaliana, chromosome 1, around the existing annotation of the gene AT1G68945. In this case, the DRS data for this region (Track K) reveal that the existing annotation is on the incorrect strand. This kind of situation is difficult for automated re-annotation pipelines to deal with, particularly if they focus on using natively un-stranded data, such as Illumina RNA-Seq, to inform the annotation. This highlights necessity of natively stranded data, such as DRS data, for correctly defining feature annotations. For full details of the individual tracks and layout of this figure, see Figure 1 (caption). See the Materials and Methods section for more details on the A. thaliana RNA-Seq, EST and DRS datasets, and their processing.
Section 2: Disentangling gene expression in complex genomic regions
Homo sapiens: Mettl12.
Figure 6 illustrates the genomic region around the gene Mettl12 which is located on the forward strand of chromosome 11. This region shows the challenges of annotation and expression quantification in complex regions and how combining different datasets, in particular strand-specific data that defines 3′-ends, can help alleviate some of these difficulties.
This figure shows a complex region of the human genome that is difficult to annotate either automatically or manually. The combination of DRS and RNA-Seq data for this ∼13 kb region of H. sapiens, chromosome 11, brings greater clarity to the feature annotation in this region, that either dataset individually is incapable of providing. In particular, the DRS data on the forward strand (Track A) clearly identifies the expression of snoRNA57, in the first intron of Mettl12, and several new transcripts for both Mettl12 and C11orf83. The combination of the exon structure seen in the RNA-seq data (Tracks E & F) and the DRS data on the reverse strand (Track K) clearly identify the dominant form of C11orf48 observed in these data. For full details of the individual tracks and layout of this figure, see Figure 1 (caption). See the Materials and Methods section for more details on the H. sapiens RNA-Seq and DRS datasets, and their processing.
Ensembl v69 provides several different gene annotation models for Mettl12, while RefSeq reports a single gene model that is significantly different to the Ensembl annotations. All these models agree on a 5′ UTR that includes an intron, within which resides a copy of the snoRNA, snorna57 (this is one of four copies of this snoRNA that occur in the human genome). The Mettl12 locus is additionally complicated by the presence of a large protein-coding ORF, C11orf48, on the antisense strand that overlaps Mettl12 completely. Ensembl provides a total of thirteen different gene models for C11orf48, while RefSeq lists a single gene model. In addition, the annotated 5′ UTRs of several C11orf48 gene models overlap with the 5′ UTR of the forward strand ORF C11orf83, which itself has two separate gene models. The details of all these annotations are provided in Table 6.
As one might anticipate for such a complex region, the un-stranded Illumina RNA-seq data for this region are ambiguous, so quantifying gene expression from these data is problematic. The terminal four exons of C11orf48 are strongly-expressed (read depth ∼150–300) suggesting that the gene model ENST00000524958 is the predominant expressed form of C11orf48 in these data. This is reinforced by reads that map across the intron/exon boundaries for this gene model. Importantly, there are no reads mapping across any splice junctions immediately prior to the start of this annotation, clearly delineating this model from the others for C11orf48. Similarly, two exons of C11orf83 are also strongly-expressed and show a consistent splicing pattern, but the expression appears to be truncated at a position that is inconsistent with all the current 3′ UTR annotations for C11orf83, suggesting a possible new gene model for this gene. The picture in the intervening region, which covers Mettl12, snora57 and another gene model for C11orf48, is far less clear. The low-level expression in this region shows little in the way of distinct exon/intron boundaries that would help to identify the origin for this expression, but marginal evidence for some other transcripts of C11orf48 and for expression from Mettl12 can be identified from individual reads that map across appropriate exon/intron boundaries.
In contrast, the DRS data are more straightforward to interpret and quantify, since they reliably identify the sequenced strand. Hence, they can be used to help inform the gene annotations and quantify the gene expression in human skin within this genomic region. The DRS data have four distinct sites of expression; three on the forward strand (Figure 6, Track A, 1–3) and one on the reverse strand (Figure 6, Track K). On the forward strand, peaks 1 & 2 coincide with the Mettl12 annotations. Peak 1 is located in the 5′ UTR of the annotations but downstream of snorna57 suggesting that this peak represents expression of the snoRNA precursor rather than the gene. Peak 2 is located in the annotated 3′ UTR of Mettl12, however it is only 13 bp downstream of the stop codon. The sequence in this region does not show any strong candidates for internal priming and the upstream sequence contains a slight variation on the canonical poly(A) motif (ATTAAA) 17 bp upstream. Although this signal hints at a new gene model for Mettl12, with a short 3′ UTR, the low-level of the expression makes this inconclusive. Further downstream on the forward strand, C11orf83 is strongly expressed in the DRS data (peak 3), again with an apparently shorter 3′ UTR than annotated. The details of all these novel transcript annotations are provided in Table 6. The data are not as clear for the reverse strand. Assuming the current annotations are correct, the exquisite positional precision of the DRS data and the lack of any DRS peaks at other locations on the reverse strand, suggest four strong gene-model candidates. Of these, model ENST00000524958 is consistent with the DRS data and the RNAseq data, supporting the conclusion that this is the predominantly expressed form of C11orf48, at least in these samples. The other potential models may be correct, just not expressed in these samples.
Homo sapiens: RPL31.
Figure 7 illustrates another example of a complex genomic region with ambiguous expression for convergent genes on opposite strands. On the forward strand, RPL31 has eleven gene models annotated in Ensembl, and three annotated in RefSeq. Across these models, the 5′ UTR is annotated with seven different start positions and the 3′ UTR is annotated with twelve alternative end positions. On the reverse strand, TBC1D8 is similarly complex, with ten Ensembl gene models and one RefSeq, four of which overlap with the five longest forms of RPL31.
This ∼25 kb region of H. sapiens, chromosome 2, again highlights the difficulties in interpreting unstranded data in complex genomes. This region encompasses the gene RPL31 on the forward strand and TBC1D8 on the reverse strand. Many of the existing annotations for these two genes overlap (Tracks D & H) making unstranded data difficult to interpret with certainty. The natively stranded DRS data (Tracks A & K) clearly delineate the ends of the transcripts observed from both these genes, including a new annotation for TBC1D8. For full details of the individual tracks and layout of this figure, see Figure 1 (caption). See the Materials and Methods section for more details on the H. sapiens RNA-seq and DRS datasets, and their processing.
Again, as one might expect for such a complex region, the RNA-seq data are ambiguous. The RNA-seq data include five strong peaks that echo the exon and UTR structure of five of the RPL31 gene models, however the considerable low-level expression covering much of the region makes it hard to draw firm conclusions from RNA-seq data alone. This ambiguity is dramatically reduced with the addition of the DRS data. In the DRS data, a strong signal is observed coincident with the downstream edge of the fifth RNA-seq peak (Figure 7, Track A, peak 1). This broad peak covers ∼20 bp and encompasses the 3′ UTR ends of seven of the annotated models. The sequence immediately upstream of the peak is strongly AT rich, suggesting that the location of the poly(A) site in RPL31 may not be very precisely controlled. Instead, a range of possible poly(A) positions occur with different likelihoods within this window.
Interestingly, two small peaks also occur in the DRS data further downstream (Figure 7, Track A, peaks 2 & 3), close to three of the longer RPL31 gene models. The first of these extends the nearest gene model by 56 bp, the second lies within 5 bp of the end of the longest annotated model. Both of these peaks have the AATAAG variant of the canonical polyadenylation signal ∼19 bases upstream of the peak. This weak but distinct signal clearly demonstrates that the shorter RPL31 gene models are not the only form of transcripts made from this gene in these data. On the reverse strand, the DRS data shows a strongly expressed peak (Peak 5) that is coincident with the end of the 3′ UTR annotated in the RefSeq TBC1D8 gene model. However, a second peak ∼1.2 kb further downstream (Peak 4), identifies a new putative polyadenylation site for this gene. Both of these peaks show the polyadenylation motif AATAAG ∼20 bp upstream. Accordingly, a new gene model is proposed for RPL31 that results in a transcript that overlaps with all the RPL31 gene models. The details are highlighted in Table 7.
Section 3: A clearer picture of small RNA expression
It is currently not possible to quantify the expression of long and short RNAs in a single RNA-Seq experiment. In order to identify expression of mature miRNAs, in particular, a protocol is used that specifically selects very short (<30 bp) RNA species and so excludes the ∼200 bp fragments commonly selected by RNA-seq protocols. Mature intergenic miRNAs are ∼21 bp single stranded RNA molecules processed out of pre-miRNA hairpin loops found in pri-miRNA transcripts and are transcribed by RNA polymerase II (). The pri-miRNAs have been shown to be polyadenylated via a variety of methods including PCR primers (–), sequence analysis () and sequencing (). The miRNA*, which is not loaded in the RISC complex is not normally retained, but can often be observed in high-throughput sequencing.
miR-200c and miR-141 illustrate the advantages of combining DRS and RNA-seq data with small RNA-seq (sRNA-seq) data for a better characterisation of intergenic pri-miRNAs. Figure 8 shows the genomic region around miR-200c and miR141. This region is flanked by genes that are expressed in the DRS and RNA-seq data; PTPN6 on the forward strand (Figure 8, Track D) and PHB2 on the reverse strand (Figure 8, Track H). Aligning directly with the miRNA annotations are two pairs of peaks in the sRNA-seq data (Figure 8, Track G, 1 & 2) that correspond to the mature miRNAs miR-200c-5p/3p and miR-141-5p/3p sequences. In each case, the 3p sequences are the dominant expressed form, as shown by the relative heights of the sRNA-seq peaks within each pair.
It is currently not possible to quantify the expression of both long and short RNAs in a single RNA-seq experiment making it difficult to get a complete picture of miRNA transcription. In this example, the combination of DRS (Track A), RNA-seq (Tracks E & F) and sRNA-seq (Track G) datasets shows the extent of the pri-miRNA that codes for miR-200c and miR-141. The lack of reads detected in the intronic region of the pri-mRNA in the RNA-seq data also suggests that the pri- and pre-miRNA processing stages occur rapidly. See the Materials and Methods section for more details on the H. sapiens RNA-seq, DRS and sRNA-seq datasets, and their processing.
The structure and extent of the pri-miRNA is clearly delineated by the RNA-seq data (Figure 8, Track E) in the regions flanking the two mature miRNA loci. No reads are detected within the intronic region that covers the pre- or mature miRNA regions suggesting that the pre-miRNAs processing and cleavage occurs rapidly, leaving the 5′ and (polyadenlyated) 3′ end fragments to be slowly degraded. The DRS data support this picture showing a cluster of expression ∼200 bp downstream of miR-141-3p on the forward strand (Figure 8, Track A, 3) that has the tandem polyadenylation site motif AATAAATAAA 26 bp upstream.
Section 4: Novel gene discovery
In addition to improving existing annotations, the combination of DRS, RNA-seq and other datasets also identifies and characterises genomic regions containing new feature candidates. The discovery of potential new snoRNAs in the downstream region of the gene AT4G10810 in A. thaliana, shown in Figure 9, is an example. The RNA-seq data downstream of AT4G10810 shows significant low-level expression over a ∼600 bp region, with no strong evidence for intron/exon structure (Figure 9, Track E, 1). The DRS data in this region are complex, showing a considerable number of small peaks that suggest multiple possible alternative polyadenylation sites (Figure 9, Track K, 2). Combined, these imply a cluster of short, currently un-annotated, features. This picture is reinforced by the large peak in expression seen in the sRNA-seq data in this region (Figure 9, Track G, 3). This peak does not show the two-peak structure characteristic of mature miRNA sequences (see Section 4), leaving us to speculate on the nature of this short feature. The SnoSeeker (v1.1, ) snoRNA prediction algorithm predicts a snoRNA coincident with this position suggesting that this is a previously undiscovered snoRNA gene. The details for the novel gene structure are in Table 8.
This figure shows a ∼2 kb region of A. thaliana, chromosome 4, including AT4G10810 that demonstrates the capability of combined DRS, RNA-seq and sRNA-seq to identify novel genes. This also highlights some of the limitations of automated re-annotation algorithms that are based on arbitrarily chosen parameter values. In this case,  (2012), provide a re-annotation of the 3′ UTR of AT4G10810 by focussing on the DRS data within a region 300 bp downstream of the end of the primary database annotations (Track K). For most A. thaliana genes, this proves to be an effective strategy, but occasionally it results in incorrect re-annotations. Here, the region downstream of AT4G10810 encompasses multiple relatively weak DRS peaks (Track K, 2) and Sherstnev et al mistakenly re-annotate the gene to include many of these peaks (Track I). In fact, the RNA-seq data (Tracks E & F, 1) clearly identify the spatial separation between AT4G10810 and the significant low-level downstream expression, suggesting a novel gene, or cluster of genes. Interestingly, a strong peak in the sRNA-seq data in this region (Track G, 3), coupled with a coincident prediction from SnoSeeker (Track I), strongly suggests the presence of a novel snoRNA in this region. See the Materials and Methods section for more details on the generation and processing of the A. thaliana RNA-seq, sRNA-seq, EST and DRS datasets.
Detailed, complete, genomic feature annotations are a cornerstone of modern biology. Their importance, particularly for experiments that rely on high-throughput transcriptomics, cannot be overstated. However, defining these annotations is not a trivial task and is made more difficult by the fact that there may be multiple ‘correct’ annotations for a gene. While the importance of accurate annotations is widely recognised, the impact that alternative individual annotation, or an alternative set of annotations, has on the subsequent downstream analysis (e.g., differential gene expression) and biological understanding is less well appreciated. Two distinct classes of problem occur commonly for genome annotations; an incomplete set of feature annotations and/or an unreliable individual feature annotation.
The known set of human genes is an example of an incomplete set of feature annotations, i.e. a set of individual annotations (each of which may also be incomplete), that is missing discrete members of the set. Over the past decade considerable effort has been expended in manually curating the annotations for the human genome. As a consequence, the annotations for known genes is precise given the available data but the set as a whole is still likely to be missing as-yet undiscovered genes and alternatively processed mRNA isoforms (). For human and other heavily curated genomes, even though the full set of information is not known, the information that exists for the individual annotations is often reliable. Providing the set is not too incomplete, this will have relatively little impact on downstream analyses that rely on these annotations. One important exception is where features that are not annotated overlap completely with known features. For example, the observed fold change for such a region could be completely misleading and would not reflect the underlying biology if expression of the overlapping genes is very different.
Unreliable individual annotations present a different challenge. Here, members of a set of feature annotations (that may be partially complete) are based on a limited or significantly imprecise set of information. The impact this has on any downstream data analyses depends on the properties of the data being used and the specific analyses. For example, differential gene expression between two experimental conditions based on RNA-seq data is not dramatically sensitive to having marginally inaccurate annotation of gene structure unless the gene structure changes between conditions. Since the conditions being compared both use the same annotations, and given that the annotations are covered by a significant majority of the reads, the calculated fold change will be similar to the actual fold change that would be calculated using a more accurate set of annotations. Techniques that focus on one region of the gene such as DRS are far more sensitive to inaccurate or incomplete annotation information. If the locus that has been sequenced is not included within the annotated GARs of the gene then no (or very little) expression will be attributed to this gene in either condition, regardless of the true change in expression in the data.
For most published genomes, the available annotation is the result of an automated prediction-based annotation pipelines (see, for example, , ). Automated gene prediction is a difficult challenge (see ) and these first-pass annotations often contain considerable inaccuracies. Re-annotation using automatic methods typically involves discarding the current set of annotations and building the annotations again from scratch as the genome sequence is improved. In some cases, re-annotation has been attempted by supplementing the current annotations guided by high-throughput transcriptomics sequencing data (). Automated, but data-driven, re-annotations can provide a considerable increase in the quality of feature annotations however they still have several drawbacks. Typically automatic methods depend on several arbitrarily set parameters such as the size of the window probed for new feature endpoints and the minimum number of reads required to extend an annotation (this is also true of automated annotation pipelines). As a result, many individual feature annotations will remain inaccurate and/or the annotation set remain incomplete. The A. thaliana re-annotation provided by  considerably extends and improves on an already comprehensive and detailed genome annotation in a well-studied model species (TAIR version 10 - ). However, the automated annotation method is unable successfully to re-annotate genes requiring a 3′ extension longer than the 300 bp downstream window, nor can it distinguish between a genuine new 3′ end annotation or the 3′ end of a new short gene located immediately downstream of an existing annotation (see, for example, Section 5 and Figure 9). Even after re-annotation dozens of intergenic DRS peaks (many comprised of >50 raw reads) remain un-accounted for, indicating the need for a more careful data-driven re-annotation.
The majority of high-throughput transcriptomics sequencing datasets are not generated with the primary intention of re-annotating genomic features, yet these datasets provide a wealth of information that can do exactly that. Individual sequencing technologies often show characteristics that make it difficult to base strong conclusions about feature re-annotation solely on the data they generate (Table 9). The experience gained in the present study suggest that genome annotation efforts that focus on using a single data type (for example, ) are likely to have difficulty producing a high-quality, high-completeness set of feature annotations for eukaryotic genomes. Combining the strengths of RNA-seq data, short RNA-seq, archival EST/mRNA data and strand-specific sequencing that defines the 3′-end is particularly effective at overcoming the weaknesses inherent to data generated from any one of these technologies individually (Table 5). These data can be used to identify and characterise gene intron/exon structure, and characterise GARs associated with these genes. The examples of gene re-annotation described here are the result of manual interpretation and integration of these different data. The steps in this manual process are not hard-and-fast rules, but rather flexible, somewhat fuzzy, interpretive decisions. A simplified flow diagram capturing the core steps of this process is shown in Figure 10 and highlights those aspects of this decision-making process that require qualitative judgement. While this flow diagram has proved difficult to automate in software, the framework may form the basis for the development of a logic-based system for re-annotation, or a rule-based “expert system” to help a skilled genome annotator. The DRS data is particularly important in this process, both by providing precise information about the termination point of 3′ UTRs and by unambiguously identifying the strand for the gene expression data. Accurately constraining 3′ UTRs associated with genes is particularly important for alternative polyadenylation studies, microRNA and other regulatory element binding site identification. It is also important for downstream differential gene expression analysis and functional pathway analysis, because a significant fraction of RNA-seq reads, and all DRS reads, associated with a gene lie within their associated 3′UTR.
This flow diagram represents a distillation of the key aspects of the manual re-annotation process used for the examples presented here. Starting with loading the data into a genome browser (grey box, rounded corners), the process is a complex decision tree with several key stages that require judgement, experience and familiarity with the data in addition to quantitative information (blue boxes). This dependence on qualitative judgements makes this process extreme difficult to capture computationally (in addition to the fact that the process would necessarily change if used with different datasets, species, etc), underscoring the importance of manual annotation. Paths through the decision tree end in one of eight possible end-points; three ‘positive’ re-annotation endpoints (green boxes, rounded corners), three ‘tentative’ re-annotation endpoints (orange boxes, rounded corners) and two ‘negative’ no re-annotation endpoints. Here we briefly look at the path through the decision tree for two of the simpler examples presented earlier in this work: Example Path 1: BMPR1A (Section 1, Figure 1) Starting with loading the data for BMPR1A (1), the EST, cDNA and RNA-seq support the existing annotation intron/exon structure (2), DRS peaks exist downstream (3), RNA-seq and EST data extend beyond the existing annotation (4), the EST and RNA-seq data terminate almost exactly coincident with the strongest downstream DRS peak (5), taken together the RNA-seq and EST data have continuous coverage over the proposed extension (6), there are no clear sequence features (stop codon or internal priming signatures that strongly suggest the re-annotation would be incorrect (7), we propose a clear re-annotation of the gene (8). Example path 2: AT1G68945 (Section 1, Figure 5) Starting with loading the data for AT1G68945 (1), the EST, cDNA and RNA-seq support the existing annotation intron/exon structure (2), DRS peaks do not exist downstream (3), DRS peaks do exist on the opposite strand but within the existing annotation (9) the EST data are stranded, however they strand association is unreliable (10), there are sequence features (in this case, numerous stop codons in multiple frames (11), the data, sequence features and existing annotation are inconsistent. We cannot re-annotate the gene without more evidence.(12). In this case, further evidence in the form of strand-specific RNA-seq data from the Ecker Lab  would, if included, allow us to follow the path 1,2,3,9,10,13,14,15 resulting in a tentative re-annotation to the opposite strand, despite the apparent presence of stop codons.
Careful re-annotation of genome features from data such as these holds great potential for novel discoveries in addition to improving the quality and reliability of every scientific result which builds on the re-annotated features. The examples presented here are entirely data-driven, removing the need to rely on computational predictions. However, this re-annotation process is not always straightforward even with complementary data sets and it has proven to be difficult to automate effectively (particularly compared to standard gene prediction routines). It is clear that automatic annotation pipelines will improve with the inclusion of strand-specific RNA-seq data and data that delineates the 5′ and 3′ ends precisely. Indeed, major projects such as Ensembl are now incorporating these data into their annotation pipelines (S. Searle per. Comm.). However, the examples presented in this paper suggest that for complete and precise annotation there is currently no substitute for annotation curated by experienced and knowledgeable scientists from a combination of DRS, RNA-seq, sRNA-seq, EST and other informative data.
We wish to acknowledge Dr Tom Walsh for his support of the high performance computing facilities at the College of Life Sciences. We thank Fatih Ozsolak, from Helicos Biosciences, for constructive discussions regarding DRS data. We also thank the NextGenBUG network for useful discussions and comments on genome annotations.
Conceived and designed the experiments: NS CC KGS SJB GGS GJB. Performed the experiments: JS CD SJB. Analyzed the data: NS CC AS CD KGS SJB GGS GJB. Contributed reagents/materials/analysis tools: NS CC AS. Wrote the paper: NS CC AS CD KGS SJB GGS GJB. Contributed to discussions of the human skin data study and analysis: WHIM.
- 1. Yandell M, Ence D (2012) A beginner's guide to eukaryotic genome annotation. Nat Rev Genet 13: 329–342.
- 2. Haas BJ, Salzberg SL, Zhu W, Pertea M, Allen JE, et al. (2008) Automated eukaryotic gene structure annotation using EVidenceModeler and the Program to Assemble Spliced Alignments. Genome Biol 9: R7.
- 3. Luo C, Hu GQ, Zhu H (2009) Genome reannotation of Escherichia coli CFT073 with new insights into virulence. BMC Genomics 10: 552.
- 4. Haas BJ, Wortman JR, Ronning CM, Hannick LI, Smith RK Jr, et al. (2005) Complete reannotation of the Arabidopsis genome: methods, tools, protocols and the final release. BMC Biol 3: 7.
- 5. Jiang L, Schlesinger F, Davis CA, Zhang Y, Li R, et al. (2011) Synthetic spike-in standards for RNA-seq experiments. Genome Res 21: 1543–1551.
- 6. Harrow J, Denoeud F, Frankish A, Reymond A, Chen CK, et al. (2006) GENCODE: producing a reference annotation for ENCODE. Genome Biol 7 Suppl 1: S4 1–9.
- 7. Finishing the euchromatic sequence of the human genome. Nature 431: 931–945.
- 8. Church DM, Goodstadt L, Hillier LW, Zody MC, Goldstein S, et al. (2009) Lineage-specific biology revealed by a finished genome assembly of the mouse. PLoS Biol 7: e1000112.
- 9. Becker TS, Rinkwitz S (2012) Zebrafish as a genomics model for human neurological and polygenic disorders. Dev Neurobiol 72: 415–428.
- 10. Harrow J, Frankish A, Gonzalez JM, Tapanari E, Diekhans M, et al. (2012) GENCODE: the reference human genome annotation for The ENCODE Project. Genome Res 22: 1760–1774.
- 11. Garber M, Grabherr MG, Guttman M, Trapnell C (2011) Computational methods for transcriptome annotation and quantification using RNA-seq. Nat Methods 8: 469–477.
- 12. Dobin A, Davis CA, Schlesinger F, Drenkow J, Zaleski C, et al. (2013) STAR: ultrafast universal RNA-seq aligner. Bioinformatics 29: 15–21.
- 13. Langmead B, Trapnell C, Pop M, Salzberg SL (2009) Ultrafast and memory-efficient alignment of short DNA sequences to the human genome. Genome Biol 10: R25.
- 14. Trapnell C, Pachter L, Salzberg SL (2009) TopHat: discovering splice junctions with RNA-Seq. Bioinformatics 25: 1105–1111.
- 15. Jan CH, Friedman RC, Ruby JG, Bartel DP (2011) Formation, regulation and evolution of Caenorhabditis elegans 3′UTRs. Nature 469: 97–101.
- 16. Ulitsky I, Shkumatava A, Jan CH, Subtelny AO, Koppstein D, et al. (2012) Extensive alternative polyadenylation during zebrafish development. Genome Res 22: 2054–2066.
- 17. Ozsolak F, Platt AR, Jones DR, Reifenberger JG, Sass LE, et al. (2009) Direct RNA sequencing. Nature 461: 814–818.
- 18. Ozsolak F, Kapranov P, Foissac S, Kim SW, Fishilevich E, et al. (2010) Comprehensive polyadenylation site maps in yeast and human reveal pervasive alternative polyadenylation. Cell 143: 1018–1029.
- 19. Sherstnev A, Duc C, Cole C, Zacharaki V, Hornyik C, et al. (2012) Direct sequencing of Arabidopsis thaliana RNA reveals patterns of cleavage and polyadenylation. Nat Struct Mol Biol 19: 845–852.
- 20. Graber JH, Nazeer FI, Yeh PC, Kuehner JN, Borikar S, et al. (2013) DNA damage induces targeted, genome-wide variation of poly(A) sites in budding yeast. Genome Res.
- 21. Moqtaderi Z, Geisberg JV, Jin Y, Fan X, Struhl K (2013) Species-specific factors mediate extensive heterogeneity of mRNA 3′ ends in yeasts. Proc Natl Acad Sci U S A 110: 11073–11078.
- 22. Hamburger V, Hamilton HL (1992) A series of normal stages in the development of the chick embryo. 1951. Dev Dyn 195: 231–272.
- 23. Ozsolak F, Milos PM (2011) Single-molecule direct RNA sequencing without cDNA synthesis. Wiley Interdiscip Rev RNA 2: 565–570.
- 24. Brawand D, Soumillon M, Necsulea A, Julien P, Csardi G, et al. (2011) The evolution of gene expression levels in mammalian organs. Nature 478: 343–348.
- 25. Joyce CE, Zhou X, Xia J, Ryan C, Thrash B, et al. (2011) Deep sequencing of small RNAs from human skin reveals major alterations in the psoriasis miRNAome. Hum Mol Genet 20: 4025–4040.
- 26. Cole C, Sobala A, Lu C, Thatcher SR, Bowman A, et al. (2009) Filtering of deep sequencing data reveals the existence of abundant Dicer-dependent small RNAs derived from tRNAs. Rna 15: 2147–2160.
- 27. Stroud H, Otero S, Desvoyes B, Ramirez-Parra E, Jacobsen SE, et al. (2012) Genome-wide analysis of histone H3.1 and H3.3 variants in Arabidopsis thaliana. Proc Natl Acad Sci U S A 109: 5370–5375.
- 28. Pelissier T, Clavel M, Chaparro C, Pouch-Pelissier MN, Vaucheret H, et al. (2011) Double-stranded RNA binding proteins DRB2 and DRB4 have an antagonistic impact on polymerase IV-dependent siRNA levels in Arabidopsis. Rna 17: 1502–1510.
- 29. Gerstein MB, Bruce C, Rozowsky JS, Zheng D, Du J, et al. (2007) What is a gene, post-ENCODE? History and updated definition. Genome Res 17: 669–681.
- 30. Fujii M, Takeda K, Imamura T, Aoki H, Sampath TK, et al. (1999) Roles of bone morphogenetic protein type I receptors and Smad proteins in osteoblast and chondroblast differentiation. Mol Biol Cell 10: 3801–3813.
- 31. Yoon BS, Ovchinnikov DA, Yoshii I, Mishina Y, Behringer RR, et al. (2005) Bmpr1a and Bmpr1b have overlapping functions and are essential for chondrogenesis in vivo. Proc Natl Acad Sci U S A 102: 5062–5067.
- 32. Zou H, Wieser R, Massague J, Niswander L (1997) Distinct roles of type I bone morphogenetic protein receptors in the formation and differentiation of cartilage. Genes Dev 11: 2191–2203.
- 33. Reid AI, Gaunt SJ (2002) Colinearity and non-colinearity in the expression of Hox genes in developing chick skin. Int J Dev Biol 46: 209–215.
- 34. Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature 408: 796–815.
- 35. Kurihara Y, Schmitz RJ, Nery JR, Schultz MD, Okubo-Kurihara E, et al. (2012) Surveillance of 3′ Noncoding Transcripts Requires FIERY1 and XRN3 in Arabidopsis. G3 (Bethesda) 2: 487–498.
- 36. Lee Y, Kim M, Han J, Yeom KH, Lee S, et al. (2004) MicroRNA genes are transcribed by RNA polymerase II. Embo J 23: 4051–4060.
- 37. Bracht J, Hunter S, Eachus R, Weeks P, Pasquinelli AE (2004) Trans-splicing and polyadenylation of let-7 microRNA primary transcripts. Rna 10: 1586–1594.
- 38. Cai X, Hagedorn CH, Cullen BR (2004) Human microRNAs are processed from capped, polyadenylated transcripts that can also function as mRNAs. Rna 10: 1957–1966.
- 39. Saini HK, Griffiths-Jones S, Enright AJ (2007) Genomic analysis of human microRNA transcripts. Proc Natl Acad Sci U S A 104: 17719–17724.
- 40. Derti A, Garrett-Engele P, Macisaac KD, Stevens RC, Sriram S, et al. (2012) A quantitative atlas of polyadenylation in five mammals. Genome Res 22: 1173–1183.
- 41. Yang JH, Zhang XC, Huang ZP, Zhou H, Huang MB, et al. (2006) snoSeeker: an advanced computational package for screening of guide and orphan snoRNA genes in the human genome. Nucleic Acids Res 34: 5112–5123.
- 42. Curwen V, Eyras E, Andrews TD, Clarke L, Mongin E, et al. (2004) The Ensembl automatic gene annotation system. Genome Res 14: 942–950.
- 43. Reese MG, Guigo R (2006) EGASP: Introduction. Genome Biol 7 Suppl 1: S1 1–3.
- 44. Burge C, Karlin S (1997) Prediction of complete gene structures in human genomic DNA. J Mol Biol 268: 78–94.
- 45. Lamesch P, Berardini TZ, Li D, Swarbreck D, Wilks C, et al. (2012) The Arabidopsis Information Resource (TAIR): improved gene annotation and new tools. Nucleic Acids Res 40: D1202–1210.
- 46. Collins JE, White S, Searle SM, Stemple DL (2012) Incorporating RNA-seq data into the zebrafish Ensembl genebuild. Genome Res 22: 2067–2078.
- 47. Boardman PE, Sanz-Ezquerro J, Overton IM, Burt DW, Bosch E, et al. (2002) A comprehensive collection of chicken cDNAs. Curr Biol 12: 1965–1969.