Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

GOPred: GO Molecular Function Prediction by Combined Classifiers

  • Ömer Sinan Saraç,

    Current address: Biotechnology Center, TU Dresden, Dresden, Germany

    Affiliation Department of Computer Engineering, Middle East Technical University, Ankara, Turkey

  • Volkan Atalay,

    Affiliation Department of Computer Engineering, Middle East Technical University, Ankara, Turkey

  • Rengul Cetin-Atalay

    rengul@bilkent.edu.tr

    Affiliation Department of Molecular Biology and Genetics, Faculty of Science, Bilkent University, Ankara, Turkey

GOPred: GO Molecular Function Prediction by Combined Classifiers

  • Ömer Sinan Saraç, 
  • Volkan Atalay, 
  • Rengul Cetin-Atalay
PLOS
x

Abstract

Functional protein annotation is an important matter for in vivo and in silico biology. Several computational methods have been proposed that make use of a wide range of features such as motifs, domains, homology, structure and physicochemical properties. There is no single method that performs best in all functional classification problems because information obtained using any of these features depends on the function to be assigned to the protein. In this study, we portray a novel approach that combines different methods to better represent protein function. First, we formulated the function annotation problem as a classification problem defined on 300 different Gene Ontology (GO) terms from molecular function aspect. We presented a method to form positive and negative training examples while taking into account the directed acyclic graph (DAG) structure and evidence codes of GO. We applied three different methods and their combinations. Results show that combining different methods improves prediction accuracy in most cases. The proposed method, GOPred, is available as an online computational annotation tool (http://kinaz.fen.bilkent.edu.tr/gopred).

Introduction

Due to advances in genome sequencing techniques during the last decade, the number of proteins being identified is exponentially increasing. Functional annotation of proteins has become one of the central problems in molecular biology. Manually curating annotations turns out to be impossible because of the large amount of data. Thus, computational methods are becoming important to assist the biologist in this tedious work.

Attempts to automate function annotation follow two main tracks in the literature. In the first track, the protein to be annotated is searched against public databases of already annotated proteins. Annotations of the highest-scoring hits, according to a similarity calculation, are transfered onto the target protein. This track can be called the transfer approach. Despite some known drawbacks such as excessive transfering of annotations, low sensitivity, low specificity, and propagation of database errors, this track is the most widely used among biologists because as it is historically the first successful method but developed when the number of protein sequences in the databases was much lower than today's [1][6], it is well understood and widely used by the experimentalists.

In the second track, protein annotation is formulated as a classification problem where annotations are classes and proteins are samples to be classified. This so-called classification approach is based on sophisticated and powerful classification algorithms such as support vector machines (SVMs) and artificial neural networks (ANNs) [7]. Methods following the classification approach explicitly draw a boundary between proteins, negative and positive training samples, defined in terms of functional annotation. Since the classification approach considers both negative and positive annotations, such methods have been shown to be more accurate in many cases [8]. Yet, they are not as popular among biologists as one would expect. One reason is because classification approaches require well-defined annotation classes and positive and negative training data for each class. The protein functional annotation task is open to more than one interpretation, where the exact annotation depends on the context in which the protein is used [5]. Furthermore, similar functions can be referred to by annotation terms with different levels of specificity. Thus, to train classifiers, one would first need a controlled vocabulary for functional terms. Then, positive and negative training data must be collected for each of these terms or classes. Data preparation is not straightforward because functional terms are related and proteins may have more than one annotation. We believe that if one can establish a classification framework with a rich number of well-assigned functional annotation terms and high quality training data, methods in classification approach will receive more attention.

In the literature, there is a wide range of methods that follow the classification approach for automated functional annotation in the literature. These methods can be grouped into three categories, depending on the employed features:

  1. homology-based methods,
  2. subsequence-based methods,
  3. feature-based methods.

Homology-based methods use the target protein's overall sequence similarity to positive and negative sequence data in order to decide to which functional class it belongs. It is generally accepted that a high level of sequence similarity is a strong indicator of functional homology. The most well-established and widely used methods for finding sequence similarity are local alignment search tools such as BLAST and PSI-BLAST [9], [10]. Subsequence-based methods focus on highly conserved subregions such as motifs or domains that are critical for a protein to perform a specific function. These methods are especially effective when the annotation to be assigned requires a specific motif or domain. The existence of these highly conserved regions in a protein enables us to infer a specific annotation even in remote homology situations [11][18]. In feature-based methods, biologically meaningful properties of a protein such as frequency of residues, molecular weight, secondary structure, extinction coefficients and other physicochemical properties are extracted from the primary sequence. These properties are then arranged as feature vectors and used as input to classification techniques [7], [19][24].

Each of the above approaches has different strength and weaknesses in classifying different functional terms. For example, the immunoglobulin's three dimensional structure is a good distinguishing feature, thus a homology-based approach that considers overall sequence similarity would be effective in identifying immunoglobulins. As secreted proteins carry a signal peptide despite their dissimilar amino acid sequence, a subsequence-based approach would be more appealing for recognizing these types proteins. The hydrophobic core is a hallmark of transmembrane proteins hence a method that considers the hydrophobicity of residues is a better classifier of these structures. Because of such characteristics, combining methods from different approaches would be more successful to classify of a wide range of protein functions than using a single method.

Our study applies and investigates the effect of combining different classifiers in order to improve the accuracy of classifying proteins according to their functions. We compare the results of three different annotation methods and four different combinations of these methods. In this study, we developed a method to prepare training data for the terms defined in Gene Ontology (GO) framework. Then, we focused on annotating proteins with 300 GO molecular function (MF) terms. We keep to the molecular function aspect mainly because genes annotated by a MF term are more likely to share a common sequence, subsequence or physicochemical features related to that specific function. Gene Ontology terms for biological process (BP) or cellular component(CC) aspects of GO may include genes with diverse features in the same class and similar features in different classes, thus this pose a problem for the classifier. This problem may not be as severe for homology-based approaches because the decision is made by considering only a few high-scoring hits independent of the other class members. On the other hand, the decision boundary for classes in a discriminative approach is optimized by considering all positive and negative samples. Although it is possible to design classifers that are more appropriate for classifying BP and CC terms, that is outside of the scope of this study.

We formulated the problem as a classification problem with 300 classes, where proteins can be assigned to more than one class. In order to avoid a bias towards a larger negative class, we presented a threshold relaxation method that not only shifts the threshold towards the more appropriate classification boundary but also maps the output of the classifier to a probability value. Finally, we investigated the effect of different classifier combination methods; results showed that combining methods improved performance for about of the classes.

Previously we developed SPMap, which predicts protein function based on subsequence feature space mapping. The difference of this work and the previous SPMap is that SPMap is one of the three employed classifiers. In addition to SPMap, in this work, we have devised and implemented BLAST k-nearest neighbor (BLAST-kNN) and peptide statistics combined with SVMs (PEPSTATS-SVM). To the best of our knowledge, this is the first study to combine multiple classifiers for protein function prediction and this is the most comprehensive discriminative classification approach that covers so many GO terms.

Materials and Methods

We performed tests for 300 GO terms in a one-versus-all setting. For each GO term, statistics were obtained by the average results from 5-fold cross-validation. In order to calculate the probability described in Section Threshold Relaxation and also the ROC scores for weighted mean method, we used leave-one-out cross validation in the test set. In other words, we used all available test dataset but one as the helper set and one held-out sample as the validation set. This was performed for all of the test datasets.

In order to compare the methods and combination strategies, we made use of statistics, which are more robust in the case of uneven test sets [25]. When the sizes of positive and negative test sets are unbalanced, several common statistics such as sensitivity, specificity and accuracy may overstate or understate the classification's performance. The measure is the harmonic mean between precision and recall.(1)(2)(3)(4)TP, FP, TN, and FN denotes true positive, false positive, true negative and false negative, respectively.

There are more than 8600 GO terms under the molecular function aspect and most have very little associated gene products, if any, or they are organism specific. To have enough data to reliably assess performance we only chose GO terms with at least 100 associated gene products. (Note that 100 gene products is not a lower limit for training GO terms.) Also, we removed broad GO terms like binding because they are not very informative. The remaining set corresponds to 300 GO terms at the time of implementation. The classifier for each GO term is independent of the rest of the system; more can be added on demand, even for terms with very few gene products.

Dataset Preparation

One of the most well-known and widely used attempts to standardize protein function terms and to define their relations is Gene Ontology, providing ontology in three aspects: molecular function, biological process and cellular location. In this study, we focused on molecular function aspect. GO organizes molecular functions as nodes on a directed acyclic graph (DAG). As a node is a more specific case of its parent node or nodes (a node may have more than one parent), it is critical to select positive and negative annotation data sets. Here, we present a way of establishing positive and negative training data for each class based on evidence codes provided by the GO annotation (GOA) project and by considering the structure of the GO DAG. While preparing training data, we used UniProt release 13.0 as the source for protein sequences [26]. Annotations were obtained from October, 2007 version of GOA mapping file and the October 2007 version of GO ontology is used as the bases of the functional terms and their relations in our system. We give the lists of UniProt identifiers of proteins used as positive and negative samples for 300 GO terms in Supplementary Dataset S1.

Positive Training Set.

Preparing the positive training dataset was relatively simple compared to the negative dataset. First, we extracted all proteins that have been annotated with the target term or one of its descendants that are connected with a is_a relation. There are also part_of and controlled_by relations in GO but for the molecular function aspect, they were negligible. Figure 1 shows this process graphically. In this figure, nodes with a check symbol represent terms included in the positive dataset. In order to populate a training dataset without any bias towards computational prediction methods and to reduce the noise in the training data as much as possible, we filtered out proteins that are annotated with one of IC, IEA, ISS, NAS and ND evidence codes (see Table 1). These codes refer to annotations either obtained by electronic means or have ambiguity in their origin [27]. The remaining evidence codes, IDA, IEP, IGI, IMP, IPI, RCA and TAS refer to experimental evidences that we included in our study.

thumbnail
Figure 1. Sample GO DAG showing how we prepared positive and negative training data.

The double-circled node indicates the target term. Nodes with green check symbol represent terms included in the positive dataset while those labeled by red X symbol represent terms included in the negative dataset.

https://doi.org/10.1371/journal.pone.0012382.g001

Negative Training Set.

Theoretically, an annotation for a protein only specifies the function it performs. This is generally not an indication of what it does not perform. A protein without a specific functional label might merely be due to lack of evidence experiment. Although this may not be a severe problem in practice, it helps us understand the difficulties in constructing a negative training dataset for a target annotation term. As a result, each protein that does not have an annotation of a target class or one of its descendants is a probable negative training sample. However, including all such proteins in the negative training dataset is neither useful nor necessary. First of all, positive and negative training sets' sizes may become very unbalanced in such a case. For some functional classes, the size of the positive training dataset is in the order of tens of proteins, whereas it is about tens of thousands for the negative dataset. Second, computational cost increases with the size of the training dataset. Since we trained our classifiers in a one-versus-all setting for 300 GO molecular function terms, our strategy was to select random representative sequences (at most 10) from each GO term other than the target term. In Figure 1, nodes with an X symbol represent GO terms that can be included in the negative dataset. We imposed two conditions on the selected random representative sequences:

  1. A sequence should not be annotated with the target term or one of its descendant terms.
  2. If a sequence is annotated with one of the ancestors of the target term, it should also be annotated with a sibling of the target term.

The first condition is straight-forward because we don't want to include protein sequences that are already in the positive training data. The second constraint is imposed in order to avoid including prospective positive training data into the negative dataset. Ideally, each protein should be annotated with a GO term on a leaf node, in other words, with the most specific annotation. If a protein is annotated only up to an internal node, this means either that there is lack of evidence for a more specific annotation or an appropriate GO term for that protein has not yet been added to the ontology. Thus, we excluded proteins that are annotated by an ancestor GO term but not with a sibling.

We aim to differentiate the proteins annotated with sibling terms; therefore proteins annotated with a sibling term should be in the negative dataset. However, the proteins with shared ancestral GO terms which are not annotated with a sibling GO term are susceptible to be annotated with the current GO term. Hence, we include them neither to the positive dataset nor to the negative dataset.

Classification Methods

After preparing positive and negative training data for each of 300 GO molecular function terms, we applied three classification methods representing three annotation approaches:

  • BLAST k-nearest neighbor (BLAST-kNN) for homology-based method,
  • Subsequence Profile Map (SPMap) for the subsequence-based method,
  • Peptide statistics combined with SVMs (PEPSTATS-SVM) for the feature-based method.

BLAST-kNN.

In order to classify the target protein, we used the -nearest neighbor algorithm [28]. Similarities between the target protein and proteins in the training data were calculated using the NCBI-BLAST tool. We extracted -nearest neighbors with the highest BLAST score. The output of BLAST-kNN, for a target protein, is calculated as follows:(5)where is the sum of BLAST scores of proteins in the -nearest neighbors in the positive training data. Similarly, is the sum of scores of the -nearest neighbor proteins in the negative training data. Note that the value of is between −1 and +1. The output is 1 if all nearest proteins are elements of the positive training dataset and −1 if all proteins are from the negative training dataset. In order to determine the label, instead of directly using with a fixed threshold, we employed the threshold relaxation algorithm given in the section entitled Threshold Relaxation, below.

SPMap.

SPMap maps protein sequences to a fixed-dimensional feature vector, where each dimension represents a group of similar fixed-length subsequences [18]. Supplementary Figure S1 gives an overview of SPMap. In order to obtain groups of similar subsequences, SPMap first extracts all possible subsequences from the positive training data and clusters similar subsequences. A probabilistic profile or a position-specific scoring matrix is then generated for a cluster. The number of clusters determines the dimension of the feature space. The generation of these profiles constructs the feature space map. Once this map is constructed, it is used to represent protein sequences as fixed dimensional vectors. Each dimension of the feature vector is the probability, calculated by the best matching subsequence of the protein sequence to the corresponding probabilistic profile. If the sequence to be mapped contains a subsequence similar to a specific group, the value of the corresponding dimension will be high. Note that this representation reflects the information of subsequences that are highly conserved among the positive training data. After feature vectors have been constructed, SVMs are used to train classifiers. Further information on SPMap is found in [18].

Pepstats-SVM.

The Pepstats tool which is a part of the European Molecular Biology Open Software Suite (EMBOSS) and used to extract the peptide statistics of the proteins [29]. Each protein is represented by a 37-dimensional vector. Peptide features and their dimensions are given in Table 2. These features are scaled using the ranges of the positive training data for both the training and test datasets and then fed to an SVM classifier.

Threshold Relaxation

A support vector machine finds a separating decision surface (hyperplane) between two classes that maximizes the margin, which is the distance of that hyperplane to the nearest samples. For a new sample, the output of the SVM is the distance of the hyperplane to the new sample. The sign of the output determines on which side of the hyperplane the new sample resides. Hence, the natural threshold for SVM is zero. The optimization algorithm of SVM that finds the hyperplane maximizing the margin is data-driven and may be biased towards the classes with more training samples. Therefore, using the natural threshold usually results in poor sensitivity if the sizes of the positive and negative training datasets are unbalanced. This is exactly the case in our problem. There are studies in the literature about threshold relaxation in favor of the smaller class [30][32]. In our study, we present a method that implicitly adjusts the threshold value and at the same time defines a probability of a sample to be in the positive class.

First, we split the test data into two sets, a helper set, to calculate the probability , and a held-out validation set to evaluate the performance of the method. Since, the number of positive test samples is outnumbered by the negative test samples, our method should handle this unbalanced situation. We calculated a confidence value for the new sample to be positive and negative separately and we then combined these confidences into a single probability. The confidence for the new sample for being positive , is calculated as the ratio of the number of positive samples in helper set having a classifier output lower than that of the new sample to the number of all positive samples in the helper set. The confidence for being negative, , is calculated similarly (Equation 6 and Equation 7). These two ratios are combined to calculate the probability of the new sample being in the positive class (Equation 8). A new sample is predicted to be positive if , and to be negative, otherwise.(6)(7)(8) and are the positive and negative test samples in the helper set, respectively. denotes the output of the classifier for sample . operator returns if the condition holds, otherwise. for the classifier output approaches if the fraction of the positive helper test set with classifier output values smaller than increases or the fraction of the negative helper test set with classifier output values larger than decreases. Note that this method implicitly adjusts the threshold because natural threshold does not necessarily corresponds to a value for . This is clearly observed when we draw the distribution of the elements of positive and negative test data sets with respect to the confidence values as shown in Supplementary Material S1. Furthermore, confidence value provides the user a measure for assessing how probable it is that the sample is a member of the given class.

It is important to note that this confidence value is not assessing the quality of the prediction. It just indicates how far the prediction value of the instance, from the decision boundary learned by the classifier. It doesn't say anything about the quality of the decision boundary, hence the accuracy of the overall classification. The confidence value of the classification is calculated for a single sample using the helper set. On the other hand, the overall accuracy is calculated using all of the samples in the validation test set.

Classifier Combination

Observations of many classification problems with different classification methods have shown that although there is usually a best method for a specific problem, samples that are correctly classified or misclassified by different methods may not necessarily overlap [33]. This observation led to the idea of combining classifiers in order to achieve a greater accuracy [33], [34]. In this study, we investigated four classifier combination techniques,

  1. voting,
  2. mean,
  3. weighted mean and
  4. addition
for three different classification methods.

Voting, also known as majority voting, simply decides the class of the new sample by counting positive and negative votes from each classifier. Note that each vote has equal weight and the output values of the classifiers are not taken into account.

For the Mean combination method, the mean of the probability values calculated by Equation 8 is used to decide the class of the new sample. If this mean value is greater than , the sample is labeled as positive.

The combination method Mean treats each method equally. But the performances of the methods vary for different functional classes. Thus in the weighted mean method, we assigned weights to each method depending on their performance in the functional class for which the classifier combination is used. To assess the performance of the methods we made use of the area under the Receiver Operating Characteristic (ROC) curve, which is called the ROC score and widely used measure to evaluate the performance of classification methods. The ROC score estimates the discriminative power of the method independent of the threshold value. To calculate the ROC score of each method, we used the helper test sets. Recall that helper test sets are held out subsets from the test set. To avoid bias, we did not use them in training or performance evaluation. They are only used to calculate ROC scores to calculate weights and for threshold relaxation. We assigned a weight to each method calculated by Equation 9.(9) denotes the weight of method , where . is the ROC score for method . Note that we used the power of ROC scores to assign a higher weight to the method with a better ROC score.

In the Addition method, the output values of the classification methods are added directly. The probability defined in Equation 8 is then calculated using these added values.

Results and Discussion

The Weighted mean method performed best in of 300 classifiers, with an average score of . Thus, Weighted mean method is chosen as the basis combination method for our online tool GOPred. Addition was the best for eight classes. Voting and mean were the best methods for one and 3 of the classes, respectively. Overall, combining improved the performance of of classes. One should note that for the rest of the cases, at least one combination method performed very similar to the best-performing single method. Average sensitivity, specificity and scores over 300 classes are given in Table 3. With respect to scores, as BLAST-NN and weighted mean methods are the best-performing single and combination methods, respectively, we compared these two methods in order to justify the significance of the improvement obtained by combined classifiers. The histogram of scores of BLAST-NN and weighted mean methods for 300 GO terms are shown in Figure 2. It can be seen that the distributions are not normal. Hence, instead of the Student's t-test, we used the Wilcoxon signed-rank test, which has no normality assumptions [35]. The null hypothesis which states that the means are the same, is rejected with 1% significance level. This justifies that weighted mean performs significantly better than BLAST-NN.

thumbnail
Figure 2. Histogram of scores of BLAST-NN and Weighted Mean methods for 300 GO terms.

https://doi.org/10.1371/journal.pone.0012382.g002

thumbnail
Table 3. Average scores, sensitivity and specificity values over 300 GO functional term classifiers.

https://doi.org/10.1371/journal.pone.0012382.t003

With respect to scores, BLAST-kNN turned out to be the best single method for a majority of the functional terms, while outperformed by SPMap only in a small fraction of functional terms. Pepstats-SVM gave the least satisfactory results in all functional classes. Our results indicated that simple peptide statistics were not sufficient to accurately classify GO functional terms. Nevertheless, samples correctly classified by each of the three methods did not overlap; this explains the success of the combination methods. We clearly demonstrate that combining three methods gives the best accuracy for functionally annotating protein sequences.

In order to investigate the effect of the threshold relaxation method, we repeated the whole experiment by using natural threshold for all methods. Figure 3 shows the comparison of average sensitivity and specificity values with and without threshold relaxation over 300 GO terms; Table 4 shows the change in sensitivity, specificity and also the total change. Results using Pepstats-SVM are significantly improved after threshold relaxation. The accuracy of the BLAST-kNN method was not notably affected; this is not surprising since -nearest neighbors method does not generate a single decision boundary. After threshold relaxation, there was a small decrease in specificity, but a much larger increase in sensitivity. This confirmed our expectation that there would be a bias towards the class with more training samples. In the majority of the 300 GO terms, the positive training dataset was highly outnumbered by the negative training dataset. Thus, samples tended to be classified as negative. This explains the very high specificity and low sensitivity values when threshold relaxation was not used. Automated function prediction tools are generally used to determine a rough idea about a protein's possible functions before conducting further in vitro experiments. We believe that failing to detect an important annotation would have far more severe consequences than assigning a wrong annotation. Thus, increasing sensitivity without a detrimental effect to specificity is a very important achievement. Detailed statistics (dataset sizes, true positive (TP), false positive (FP), true negative (TN), false negative (FN), sensitivity, specificity, positive predictive value (PPV), receiver operating characteristic (ROC) score, score) for all of the methods on each GO functional term can be found in the Supplementary Material S2.

thumbnail
Figure 3. Comparison of sensitivity and specificity values with and without threshold relaxation.

The first and second columns are the sensitivity without and with threshold relaxation, third and forth columns are the specificity without and with threshold relaxation.

https://doi.org/10.1371/journal.pone.0012382.g003

thumbnail
Table 4. Changes in sensitivity and specificity, total change and change in F1 score when threshold relaxation is applied.

https://doi.org/10.1371/journal.pone.0012382.t004

The actual challenge for an automated annotation tool is to annotate newly identified sequences or genomes in addition to the validation of the tool on the well established annotations of highly studied proteins. Thus, we applied our method to predict functions of nine recently reported H. sapiens proteins in the last year and highly studied human glucokinase, p53 tumor suppressor, and ras oncogene from NCBI database (Table 5, first 3 columns). For all of the analyzed protein sequences, GOPred was able to predict the literature reported functions of these proteins. This test was a decent indication of the effectiveness of the combination method. Another challenge is the comparison between the performances of the new and the previously reported annotation tools. Currently to the best of our knowledge, there are not any other discriminative classifier approach that performs predictions on GO terms, therefore, we compared GOPred annotations with ConFunc [36], PFP [37], and GOtcha [38] annotations on the above-mentioned twelve protein sequences.

thumbnail
Table 5. GOPred, ConFunc, PFP and GOtcha annotations for 12 human gene entries from the NCBI gene database.

https://doi.org/10.1371/journal.pone.0012382.t005

Both GOtcha and PFP improves the simple homology-based approach. PFP takes into account the DAG structure of GO and ranks probable GO terms according to both their frequency of association to similar sequences and the degree of similarity those sequences share with the query. GOtcha calculates term-specific probability (P-score) measures of confidence instead of directly transferring annotations from highest scoring hits. ConFunc generates position specific scoring matrices (PSSMs) for each GO term using the conserved residues among the sequences annotated by the GO term.

DDX11L1 is a novel gene product whose function has not been established yet and it is from human subtelomeric chromosomal region [39]. All of the prediction tools assigned enzyme activity to this protein in relation to nucleic acid chain hydrolysis such as hydrolase activity, acting on ester bonds, nucleic acid binding, acting on acid anhydrides, purine nucleotide binding, and helicase activity. Recently found Killin protein was reported as nuclear inhibitor of DNA synthesis with high DNA binding affinity [40]. For Killin protein, only GOPred and PFP tools generated annotations. GOPred assigned exonuclease activity while PFP gave DNA and nucleotide binding annotations to Killin. Exonucleases are the enzymes that cleave phosphodiester bonds by binding to the DNA; by this way, they may contribute to the nuclear inhibition of DNA synthesis. Another novel protein, GLRX was reported to be glutaredoxin-like, oxidoreductase [41]. All of the tools except GOtcha predicted in general oxidoreductase enzyme activity for GLRX. FINP2 was reported to be interacting partner of AMPK and FLCN proteins [42]. Only GOPred and PFP tools gave predictions in correlation with the function reported in the literature, which were enzyme activator activity, enzyme binding, and purine nucleotide binding. Microtubule associated motor protein KIF18B [43] was predicted as microtubule binding by GOPred and motor activity by both GOPred and ConFunc tools. PFP and GOtcha tools assigned relatively general GO annotations such as hydrolase activity, purine nucleotide binding, and binding. HES-HEY-like transcription factor HELT protein that we also present as an example in Figure 4, has transcription regulator activity [44]. GOPred, ConFunc, and GOtcha prediction tools attributed annotations related to transcription regulation and DNA binding annotations. Recently reported RGL4 protein is a guanine nucleotide dissociation factor [45]. Only GOPred was able to give annotations for RGL4 such as guanyl-nucleotide exchange factor, small GTPase binding that were similar to those reported in the literature. Other annotation tools assigned very general GO terms to RGL4. PGAP1 was reported as GPI inositol-deacylase [46]. GOPred and ConFunc assigned annotations related to the literature reports such as hydrolase activity acting on ester bonds. COBRA1 was the last protein that we included in our analysis as a recently identified protein which was reported as the member of negative elongation factor complex during transcription and inhibitor of AP1 [47]. None of the predictors assigned significant GO terms to COBRA1; some very broad terms such as ribonucleotide binding, nucleic acid binding were predicted.

thumbnail
Figure 4. GOPred output for helt (HES/HEY-like transcription factor) protein.

https://doi.org/10.1371/journal.pone.0012382.g004

In addition to the above discussed nine newly identified protein sequences, we analyzed three well characterized proteins. Glucokinase (GCK) is an enzyme that phosphorylates glucose during glycolysis [48]. All of the tools assigned highly significant GO terms related to the function of this protein. p53 tumor suppressor protein (TP53) which is a transcription factor binds to DNA upon tetramerization [49]. GO terms associated to TP53 protein were chromatin binding, protein heterodimerization activity, transcription factor activity, zinc ion binding, DNA binding that were predicted by all of the tools. The oncogene protein v-Ha-ras Harvey rat sarcoma viral oncogene homolog (HRAS) [50] has GTPase activity, which was correctly annotated by all of the tools as well.

The prediction results were very similar for the well-annotated proteins presented in the last three rows of Table 5. GOPred and PFP tools could predict annotations that correlated with the literature reports. However ConFunc did not produce annotations for the protein sequences KILLIN and FINP2. GOthca tool could only assign annotations to the three out of nine newly identified human proteins (Table 5 last column). The comparison here, of course, does not rank the tools' prediction rates, but it gives an idea about their capabilities. The difference observed in comparative function prediction analysis might be due to the underlying methods for these four tools. GOPred and PFP tools apply integration of different data sources related to the sequence to be annotated, rather than searching strict pattern matching to identify functional motifs in the sequences of proteins.

Figure 4 shows the output of our online classification tool for the helt protein. Furthermore, as an exemplary genome annotation, GOPred was applied to the annotation of 73 recently reported genes from the Ovis Aries (sheep) genome. Results are available as Supplementary Material S3 and on the GOPred web site (http://kinaz.fen.bilkent.edu.tr/gopred/ovisaries.html).

Automating protein functional annotation is an important and difficult problem in computational biology. Most of the function prediction tools run stand alone and other than those using the transfer approach, define the annotation problem as a classification problem. Combining classifiers was shown to improve the accuracy as well as the coverage in protein structure prediction studies [51]. [52] describes the hierarchical composition of two classifiers: a simple classifier with high coverage and another classifier with less coverage but higher accuracy. In contrast, our combination scheme takes into account the results of all classifiers at the same time; it can be thought of as combining evidence from different sources. In addition, we apply it to the totally different context of protein function prediction. Function prediction tools require positive and negative training data and the success of the resulting classifier relies on the representative power of this dataset. In this study, we presented and applied a method to construct well-aimed positive and negative training data using the DAG structure of GO and annotations using evidence codes provided by the GOA project. When using functional classifiers as an annotation system, one must implement a classifier for each functional class in a one-versus-rest setting because as the number of functions increases it becomes intractable to train one-versus-one classifiers. However, a one-versus-rest setting in a classifier renders positive and negative samples highly unbalanced. Therefore, we applied a threshold relaxation method that not only avoids the bias towards the class with more training data but also assigns a probability to the prediction, thus providing a way to assess the strength of the annotation.

There is a rich literature on automated function prediction methods, each of which has different strengths and weaknesses. We investigated the effects of combining different classifiers to better annotate protein sequences with functional terms defined in the molecular function aspect of GO. The resulting combined classifier clearly outperformed constituent classifiers. Our results also showed that the best combination strategy is the weighted mean method, which assigns different weights to classifiers depending on their discriminative strengths for a specific functional term.

It is also important to note that we do not merely give annotations but also provide a measure for each functional class that states how probable it is that the query protein is a member of that class. This means we also provide less-probable functional annotations for the analyzed sequence. This information may help the biologist build a road map before conducting expensive in vitro experiments.

A valuable addition to GOPred would be to identify important subsequences or physicochemical properties that explains the decisions of GOPred. Unfortunately, a direct interpretation of important features is not possible since the decision boundry for the classification is determined by the non-linear classifier by using the existence and non-existence of features from both positive and negative examples. Furthermore, GOpred is an ensemble of different classifiers. A future work would be to study each classifier separately by feature selection methods and giving probable explanations for each decision.

Finally, the proposed classifier combination approach was made publicly available as an online annotation system, called GOPred, covering 300 GO terms. As the classifier for each GO term was trained in a one-versus-rest manner independent of other terms, GOPred can be easily extended to cover annotations for more GO terms.

Supporting Information

Dataset S1.

Dataset: Lists of UniProt IDs of proteins used as positive and negative samples for 300 GO terms.

https://doi.org/10.1371/journal.pone.0012382.s002

(14.59 MB TAR)

Material S1.

Detailed statistics of test results for 5-fold cross validation on 300 GO terms is available in tab-delimited text format.

https://doi.org/10.1371/journal.pone.0012382.s003

(0.16 MB TXT)

Acknowledgments

The authors would like to thank Rana Nelson for proofreading this manuscript.

Author Contributions

Conceived and designed the experiments: VA RCA. Performed the experiments: ÖSS. Analyzed the data: ÖSS RCA. Contributed reagents/materials/analysis tools: VA. Wrote the paper: ÖSS VA RCA.

References

  1. 1. Demos D, Valencia A (2000) Practical limits of function prediction. Proteins 41: 98–107.
  2. 2. Gilks WR, Audit B, de Angelis D, Tsoka S, Ouzounis CA (2005) Percolation of annotation errors through hierarchically structured protein sequence databases. Math Biosci 193: 223–234.
  3. 3. Engelhardt BE, Jordan MI, Muratore KE, Brenner SE (2005) Protein molecular function prediction by bayesian phylogenomics. PLoS Comput Biol 1: 45.
  4. 4. Sasson O, Kaplan N, Linial M (2006) Functional annotation prediction: All for one and one for all. Protein Sci 15: 1557–1562.
  5. 5. Friedberg I (2006) Automated protein function prediction - the genomic challenge. Brief Bioinform 7: 225–242.
  6. 6. Sokolov A, Ben-Hur A (2008) A structured-outputs method for prediction of protein function. Brussels, Belgium: pp. 49–58.
  7. 7. Duda RO, Hart PE, Stork DG (2000) Pattern Classification. Wiley-Interscience. second edition.
  8. 8. Leslie CS, Eskin E, Cohen A, Weston J, Noble WS (2004) Mismatch string kernels for discriminative protein classification. Bioinformatics 20: 467–476.
  9. 9. Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ (1990) A basic local alignment search tool. J Mol Biol 215: 403–410.
  10. 10. Altschul SF, Madden TL, Schäffer AA, Zhang J, Zhang Z, et al. (1997) Gapped blast and psi-blast: a new generation of protein database search programs. Nucleic Acids Res 25: 3389–3402.
  11. 11. Hannenhalli SS, Russell RB (2000) Analysis and prediction of functional sub-types from protein sequence alignments. J Mol Biol 303: 61–76.
  12. 12. Wang JTL, Ma Q, Shasha D, Wu CH (2001) New techniques for extracting features from protein sequences. IBM Syst J 40: 426–441.
  13. 13. Liu AH, Califano A (2001) Functional classification of proteins by pattern discovery and top-down clustering of primary sequences. IBM Syst J 40: 379–393.
  14. 14. Ben-Hur A, Brutlag DL (2003) Remote homology detection: a motif based approach. ISMB (Supplement of Bioinformatics). pp. 26–33.
  15. 15. Wang X, Schroeder D, Dobbs D, Honavar V (2003) Automated data-driven discovery of motif-based protein function classifiers. Inform Sciences 155: 1–18.
  16. 16. Kunik V, Solan Z, Edelman S, Ruppin E, Horn D (2005) Motif extraction and protein classification. Computational Systems Bioinformatics (CSB). pp. 80–85.
  17. 17. Blekas K, Fotiadis DI, Likas A (2005) Motif-based protein sequence classification using neural networks. J Comput Biol 12: 64–82.
  18. 18. Sarac OS, Gürsoy-Yüzügüllü Ö, Çetin Atalay R, Atalay V (2008) Subsequence-based feature map for protein function classification. Comput Biol Chem 32: 122–130.
  19. 19. King RD, Karwath A, Clare A, Dehaspe L (2000) Accurate prediction of protein functional class from sequence in the mycobacterium tuberculosis and escherichia coli genomes using data mining. Yeast 17: 283–293.
  20. 20. Pasquier C, Promponas VJ, Hamodrakas SJ (2001) Pred-class: cascading neural networks for generalized protein classification and genome-wide applications. Proteins 44: 361–369.
  21. 21. Jensen L, Gupta R, Blom N, Devos D, Tamames J, et al. (2002) Prediction of human protein function from post-translational modifications and localization features. J Mol Biol 319: 1257–1265.
  22. 22. Cai CZ, Han LY, Ji ZL, Chen X, Chen YZ (2003) Svm-prot: web-based support vector machine software for functional classification of a protein from its primary sequence. Nucleic Acids Res 31: 3692–3697.
  23. 23. Karchin R, Karplus K, Haussler D (2002) Classifying g-protein coupled receptors with support vector machines. Bioinformatics 18: 147–159.
  24. 24. Cheng BYM, Carbonell JG, Klein-Seetharaman J (2005) Protein classification based on text document classification techniques. Proteins 58: 955–970.
  25. 25. Holloway DT, Kon MA, DeLisi C (2006) Machine learning methods for transcription data integration. IBM J Res Dev 50: 631–644.
  26. 26. Bairoch A, Apweiler R, Wu CH, Barker WC, Boeckmann B, et al. (2005) The universal protein resource (uniprot). Nucleic Acids Res 33: 154–159.
  27. 27. Eisner R, Poulin B, Szafron D, Lu P, Greiner R (2005) Improving protein function prediction using the hierarchical structure of the gene ontology.
  28. 28. Cover T, Hart P (1967) Nearest neighbor pattern classification. IEEE T Inform Theory 13: 21–27.
  29. 29. Rice P, Longden I, Bleasby A (2000) The european molecular biology open software suite. Trends Genet 16: 276–277.
  30. 30. Zhai C, Jansen P, Stoica E, Grot N, Evans DA (1998) Threshold calibration in clarit adaptive filtering. pp. 96–103.
  31. 31. Arampatzis A (2001) Unbiased s-d threshold optimization, initial query degradation, decay, and incrementality, for adaptive document filtering. pp. 596–605.
  32. 32. Shanahan JG, Roma N (2003) Boosting support vector machines for text classification through parameter-free threshold relaxation. CIKM,. ACM . pp. 247–254.
  33. 33. Kittler J, Hatef M, Duin RPW, Matas J (1998) On combining classifiers. IEEE T Pattern Anal 20: 226–239.
  34. 34. Sohn SY, Shin HW (2007) Experimental study for the comparison of classifier combination methods. Pattern Recogn 40: 33–40.
  35. 35. Wilcoxon F (1945) Individual comparisons by ranking methods. Biometrics 1: 80–83.
  36. 36. Wass MN, Sternberg MJE (2008) Confunc - functional annotation in the twilight zone. Bioinformatics 24: 798–806.
  37. 37. Hawkins T, Luban S, Kihara D (2006) Enhanced automated function prediction using distantly related sequences and contextual association by pfp. Protein Sci 15: 1550–1556.
  38. 38. Martin DMA, Berriman M, Barton GJ (2004) Gotcha: a new method for prediction of protein function assessed by the annotation of seven genomes. BMC Bioinformatics 5: 178.
  39. 39. Costa V, Roberto R, Gianfrancesco F, Matarazzo MR, D'Urso M, et al. (2009) A novel transcript family emerging from human subtelomeric regions. BMC Genomics 10: 250.
  40. 40. jig Cho Y, Liang P (2008) Killin is a p53-regulated nuclear inhibitor of dna synthesis. P Natl Acad Sci USA 105: 5396–5401.
  41. 41. Fernandes A, Holmgren A (2004) Glutaredoxins: glutathione-dependent redox enzymes with functions far beyond a simple thioredoxin backup system. Antioxid Redox Sign 6: 63–74.
  42. 42. Hasumi H, Baba M, Hong SB, Hasumi Y, Huang Y, et al. (2008) Identification and characterization of a novel folliculin-interacting protein fnip2. Gene 415: 60–67.
  43. 43. Yildiz A, Selvin PR (2005) Kinesin: walking, crawling and sliding along? Trends Cell Biol 15: 112–120.
  44. 44. Schwanbeck R, Schroeder T, Henning K, Kohlhof H, Rieber N, et al. (2008) Notch signaling in embryonic and adult myelopoiesis. Cells Tissues Organs 188: 91–102.
  45. 45. Bodemann BO, White MA (2008) Ral gtpases and cancer: linchpin support of the tumorigenic platform. Nat Rev Cancer 8: 133–140.
  46. 46. Tanaka S, Maeda Y, Tashima Y, Kinoshita T (2004) Inositol deacylation of glycosylphosphatidylinositol-anchored proteins is mediated by mammalian pgap1 and yeast bst1p. J Biol Chem 279: 14256–14263.
  47. 47. McChesney PA, Aiyar SE, Lee OJ, Zaika A, Moskaluk C, et al. (2006) Cofactor of brca1: a novel transcription factor regulator in upper gastrointestinal adenocarcinomas. Cancer Res 66: 1346–1353.
  48. 48. Altay C, Alper CA, Nathan DG (1970) Normal and variant isoenzymes of human blood cell hexokinase and the isoenzyme pattern in hemolytic anemia. Blood 36: 219–227.
  49. 49. Vogelstein B, Kinzler K (1992) p53 function and dysfunction. Cell 70: 523–526.
  50. 50. Colby WW, Hayflick JS, Clark SG, Levinson AD (1986) Biochemical characterization of polypeptides encoded by mutated human ha-ras1 genes. Mol Cell Biol 6: 730–734.
  51. 51. Guermeur Y, Pollastri G, Elisseeff A, Zelus D, Paugam-Moisy H, et al. (2004) Combining protein secondary structure prediction models with ensemble methods of optimal complexity. Neurocomputing 56: 305–327.
  52. 52. Melvin I, Weston J, Leslie CS, Noble WS (2008) Combining classifiers for improved classification of proteins from sequence or structure. BMC Bioinformatics 9: 389.