Figures
Abstract
Feasibility of chromosomal manipulation in mammalian cells was first reported 15 years ago. Although this technique is useful for precise understanding of gene regulation in the chromosomal context, a limited number of laboratories have used it in actual practice because of associated technical difficulties. To overcome the practical hurdles, we developed a Cre-mediated chromosomal recombination system using fluorescent proteins and various site-specific recombinases. These techniques enabled quick construction of targeting vectors, easy identification of chromosome-rearranged cells, and rearrangement leaving minimum artificial elements at junctions. Applying this system to a human cell line, we successfully recapitulated two types of pathogenic chromosomal translocations in human diseases: MYC/IgH and BCR/ABL1. By inducing recombination between two loxP sites targeted into the same chromosome, we could mark cells harboring deletion or duplication of the inter-loxP segments with different colors of fluorescence. In addition, we demonstrated that the intrachromosomal recombination frequency is inversely proportional to the distance between two recombination sites, implicating a future application of this frequency as a proximity sensor. Our method of chromosomal manipulation can be employed for particular cell types in which gene targeting is possible (e.g. embryonic stem cells). Experimental use of this system would open up new horizons in genome biology, including the establishment of cellular and animal models of diseases caused by translocations and copy-number variations.
Citation: Uemura M, Niwa Y, Kakazu N, Adachi N, Kinoshita K (2010) Chromosomal Manipulation by Site-Specific Recombinases and Fluorescent Protein-Based Vectors. PLoS ONE 5(3): e9846. https://doi.org/10.1371/journal.pone.0009846
Editor: Michael Freitag, Oregon State University, United States of America
Received: December 17, 2009; Accepted: March 3, 2010; Published: March 24, 2010
Copyright: © 2010 Uemura et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This study was supported by Grant-in-Aid for Scientific Research (KAKENHI 20590326) from Japanese Society for the Promotion of Science. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Modern genetic engineering depends on DNA-modifying enzymes including restriction endonucleases, ligases and polymerases. This technology has been applied to manipulation of purified DNA less than a few hundred kilobases. Broadening the range of manipulatable DNA to megabase scale would be fundamental to deepen the understanding of gene regulation in the chromosomal context. To this purpose, chromosomal manipulation in mammalian cells by Cre recombinase (a site-specific recombinase derived from bacteriophage P1, catalyzing DNA recombination between two 34-bp loxP sequences) after targeted integration of two loxP sites into defined chromosomal loci has been reported previously [1]–[8]. These studies relied exclusively on the selection of cells expressing hypoxanthine phosphoribosyltransferase (HPRT) as an indicator of recombination, and therefore, the use of HPRT-deficient cells was a prerequisite. In this study, we introduced two improvements to this technology. First, we utilized fluorescent proteins as rearrangement markers to broaden the range of cells this technology can be applied to. Second, to facilitate the otherwise cumbersome construction of targeting vectors, we adopted Gateway cloning system, which utilizes in vitro site-specific recombination by λ-phage-derived integrase complexes (BP and LR Clonases) [9]. Here, we demonstrate three kinds of application of our novel chromosomal manipulation: recapitulation of pathogenic chromosomal translocation, induction of copy-number variation, and assessment of proximity between gene loci.
Results and Discussion
New vectors for chromosomal manipulation
To monitor the integrity and fate of two junctions, we generated loxP site-containing targeting vectors to encode green and red fluorescent proteins after recombination. As shown in Fig. 1, coding sequences of enhanced green fluorescent protein (GFP) and the red fluorescent protein variant dimer2 [10] (DsRed) were split in the middle and fused to each other with intervening drug selection markers (hygromycin- or neomycin-resistance gene) franked by loxP sites. Similar strategy utilizing restoration of split-fluorescent protein by Cre recombinase was previously adopted for analysis of neuronal differentiation in mice [11]. Our gene cassettes for split-fluorescent protein are bound by FRT and att (L1 or L2) sites for later recognition by Flp recombinase (a site-specific recombinase derived from the 2 µm plasmid of budding yeast) and Gateway LR Clonase, respectively. These constructed vectors can be easily converted to the final gene-targeting vectors in a reaction with two homology-arm vectors and a destination vector (i.e. pDEST DTA-MLS [12]), catalyzed by LR Clonase.
(upper) pENTR-Site1 plasmid contains cytomegalovirus (CMV) promoter-driven fusion gene, the first half consisting of GFP (green box) and the last half of dimer2 (a DsRed variant, red box) with an intervening hygromycin-resistance gene (grey box) flanked by loxP sites (red triangles), outer two FRT sites (blue triangles) and attL1 and attL2 sites (open box). pENTR-Site2 expresses a fusion gene complementary to pENTR-Site1 harboring a neomycin-resistance gene (grey box). These vectors in addition to 5′- and 3′-targeting homology arm vectors and the pDEST DTA-MLS destination vector were assembled into targeting vectors by LR Clonase. Purple shadows connect att sites to be recombined. (lower) After gene targeting into homologous chromosomal regions, Cre first removes drug-resistance genes and then recombines distant loxP sites. After recombination, GFP and dimer2 mRNAs are spliced and expressed. Expression of Flp excises fluorescent protein genes to achieve clean rearrangement, leaving a 103-bp element. DTA, diphtheria toxin A; MLS, multiple linearization sites (PmeI, AscI, I-SceI, SwaI, PacI); ori, replication origin; KmR, kanamycin-resistance gene; AmpR, ampicillin-resistance gene; ccdB, bacterial ccdB gene.
In this study, we used Nalm-6, a human pre-B acute lymphoblastic leukemia cell line with high gene-targeting efficiency [13]. Before gene targeting, we stably transfected a vector expressing 4-hydroxytamoxifen (OHT)-regulated Cre recombinase (MerCreMer [14]) to Nalm-6 to obtain NCR1 cells. MerCreMer is a modified Cre both amino- and carboxyl-terminally fused with hormone-binding domain of human estrogen receptor α with mutations that reduces response to native estrogens but not its synthetic analogue OHT (Mer stands for mutated estrogen receptor). MerCreMer lacks Cre activity in the absence of OHT but is activated promptly by OHT.
After linearization at multiple linearization sites (MLS), a Site1-targeting vector was electroporated into NCR1 cells, followed by PCR screening and Southern blotting. A targeted clone was further subjected to a second targeting with a Site2 vector. Thus, double-targeted clones were obtained. Addition of OHT at a later stage can induce excision of drug-resistant markers, leaving a loxP site at the GFP–DsRed junction. Then, continued Cre activity would lead to recombination between the loxP sites in Site1 and Site2. To remove GFP and DsRed expression units and loxP sites, Flp recombinase was transiently expressed in GFP- and DsRed-positive cells, leaving only the 103-bp artificial sequence of attB1-FRT-attB2 (Fig. 1). We introduced this Flp recombinase-mediated excision of fluorescent protein expression elements because presence of those promoters may perturb expression of nearby genes. In this paper, we refer to a transgenic state after Flp-mediated excision of restored fluorescent protein genes as clean (e.g. clean translocation).
Induction of chromosomal translocation
To test the feasibility of this system, we recapitulated two pathogenic chromosomal translocations in human hematological malignancies: t(8;14)(q24;q32) (MYC/IgH) found in Burkitt lymphoma and t(9;22)(q34;q11.2) (BCR/ABL1) in chronic myeloid leukemia. As shown in Fig. 2A, we introduced Site1 within the immunoglobulin heavy chain α2 (IGHA2) locus on the telomeric side of the IgH 3′ enhancer in MerCreMer-expressing NCR1 cells (Fig. S1). One of the six clones with correct targeting was designated NSB1. Subsequently, the MYC locus of NSB1 cells was targeted by Site2 vector and four targeted clones were obtained (NSMyc, Fig. S2), of which three clones were cultured in the presence or absence of OHT for 7 days and analyzed by flow cytometry.
A, Site1 vector (red triangle on chromosome 14) was targeted to the IGHA2 locus of Nalm-6 cells expressing tamoxifen-regulated Cre. Site2 vector (red triangle on chromosome 8) was subsequently targeted to the MYC locus (red circle). The IgH enhancer is indicated by a green circle. B, Flow cytometric profiles of the indicated stages. Red circles indicate the sorted cell populations. C, Confirmation of translocation by PCR. PCR products of expected sizes were observed for cells after translocation (post) but not for cells before Cre expression (pre). H2O lanes show the no-template controls. Triangles above the transgene schemes represent primer positions (IgA2-B41-F1 and MYC-B23-R1 for green, and MYC-B41-F1 and IgA2-B23-R1 for red), respectively. D, FISH analysis demonstrating MYC/IgH translocation for cells after recombination by Flp, using BAC probes. Green probe hybridizes to a chromosome 14 region near Site1-integrated IgH locus on the centromeric side. Red probe hybridizes to a chromosome 8 region near Site2-integrated MYC locus on the telomeric side. These probes co-localize only after Cre-mediated translocation and appear as a yellow signal (right panel, box), magnification of which is shown in the inset. E, Site1 and Site2 vectors containing loxP sites (red rectangle) were targeted into the first intron of the BCR gene and the ABL1 gene, respectively. Vertical bars and boxes connected with v-shaped lines indicate exon–intron structure of genes. The derivative chromosome 22 [der(22)] recapitulates the Philadelphia (Ph) chromosome. F, SKY analysis of cells with artificial BCR/ABL1 translocation. The derivative chromosome 9 [der(9)] in the green box contains the material (pink) translocated from chromosome 22. The amount of chromosome 9 material that was translocated to chromosome 22 was too small to be resolved by this SKY analysis (Ph chromosome, pink box). The previously reported translocation between chromosomes 5 and 12 in Nalm-6 cells [23] could be also detected. G, Western blot confirming expression of the BCR-ABL1 fusion protein (190 kD) after clean translocation (post) with constitutive expression of ABL1 and GAPDH proteins.
The frequency of GFP-DsRed double-positive cells was (1.5±1.2)×10−5 [mean ± standard deviation, n = 3]. Enforcement of Cre activity by a retroviral vector increased the frequency of double-positive cells by more than 40 fold (6.8×10−4), indicating that Cre activity is a major factor influencing translocation efficiency. We continued Cre activation of one clone, NSMyc23, until day 20, when we sorted the double-positive cells (Fig. 2B). The sorted cells were then subjected to limiting dilution to obtain pure clones of double-positive cells, followed by electroporation of a Flp-expression plasmid to achieve a clean translocation. The resulting double-negative cells were cloned by sorting and limiting dilution. Chromosomal translocation was verified by polymerase chain reaction (PCR) using MYC/IgH translocation-specific primers (Fig. 2C) and by fluorescence in situ hybridization (FISH) using bacterial artificial chromosome (BAC) probes specific to the IgH or the MYC locus (Fig. 2D).
We similarly induced BCR/ABL1 translocation by Site1 targeting to the BCR locus of NCR1 cells and subsequent Site2 targeting to the ABL1 locus (Fig. 2E, Fig. S3 and Fig. S4). The frequency of double-positive cells on day 7 of OHT stimulation was (5.9±1.8)×10−5 (n = 10). To verify production of the BCR-ABL1 translocation, several cell clones with a clean translocation were obtained after transient expression of Flp recombinase in the fluorescence-positive cells followed by flow-cytometric sorting and limiting dilution for fluorescence-negative cells. Successful translocation in thus obtained cell clones was verified by FISH analysis (not shown) and spectral karyotyping (SKY, a FISH-based cytogenetic technique that allows the simultaneous identification of all 24 human chromosomes with whole chromosome painting probes labeled with different combination of fluorescent dyes) (Fig. 2F). Production of BCR-ABL1 fusion protein was confirmed by western blot analysis (Fig. 2G). Expected splicing between juxtaposed exons was confirmed by sequencing reverse-transcription PCR product (data not shown).
Induction of copy number variation
Recently, much attention has been paid to the copy-number variation (CNV) in the human genome, which is considered to have a greater impact on the phenotype than single nucleotide polymorphism. Utilities of site-specific recombinases to generate CNV were previously reported in several organisms including yeast [15], plant [16], fly [17] and mouse [2]. To demonstrate the feasibility of our system for generating CNV, we inserted Site1 and Site2 into the same chromosome 14 (Fig. 3A) with an identical orientation. For Site2 targeting, NSB1 cells were used, which were used for recapitulation of MYC/IgH translocation (Fig. 2A–D) and harbor Site1 at IGHA2 locus. Site 2 was targeted to an intergenic region between LOC122631 and C14orf180, which lies 1.1-Mb apart from Site1 to the centromere. Cre activation was expected to result in two different outcomes. Recombination in the same DNA molecule leads to deletion of the inter-loxP segment. This causes GFP expression from fused Site1/2 (5′ half of Site1 and 3′ half of Site2) in the chromosome and transient expression of DsRed from Site2/1 (5′ half of Site2 and 3′ half of Site1) in the excised circular product that eventually disappears. Alternatively, nonallelic recombination at the G2/M phase of the cell cycle between sister chromatids leads to inter-loxP duplication on one chromatid and its deletion on the other (Fig. 3A). Subsequent cell division generates both cells with duplication expressing only DsRed and cells with deletion expressing only GFP. Therefore, irrespective of the two recombination modes (intramolecular and intermolecular recombination), GFP- and DsRed-positive cells represent cells with deletion and duplication, respectively.
A, Possible outcome of Cre-mediated recombination between two loxP sites with an identical orientation in the same chromosome 14. Site1 was targeted to the IGHA2 locus within the IgH gene cluster. Site2 was targeted to a region tentatively designated 104, 1.1 Mb centromeric to the IGHA2 loci. B, Results of representative two cis-targeted (NSK122 and NSK126) and two trans-targeted clones (NSK107 and NSK108) are shown. The chromosomes 14 with Site1 and Site2 integration harbor red and green signals, respectively, and are highlighted with boxes, magnifications of which are shown in insets.
We analyzed double-targeted cells (NSK) selected after Southern blotting (Fig. S5) and metaphase FISH using Site1 and Site2 probes to examine whether Site2 integration occurred in the Site1-integrated chromosome 14 (integration in cis) or in its homologue (integration in trans) (Fig. 3B, Table 1). The four cis-targeted clones were cultured in the presence of OHT. On day 7, cells positive for either GFP or DsRed were observed [(1.5±0.4)×10−2; n = 4] (Fig. 4A, top). Cells were passaged in the absence of OHT for an additional 10 days, when the fraction of double-positive cells significantly decreased from 0.4×10−2 to 0.3×10−3 (Fig. 4A, top; compare day 7 and day 17).
A, Flow cytometric profiles of double-targeted cells, Cre-activated cells, and Cre-terminated cells kept OHT-free for 10 days (top). Flow cytometric profiles of sorted cell clones and a DsRed-positive clone 10 days after Cre activation (bottom). B, PCR confirmation of rearrangement for clones from cis- and trans-targeting cells. Clone numbers from 1 to 5 correspond to rearranged clone numbers (post) in A. Clones 6 to 9 are derived from trans-targeted cells. Cells before Cre activation (pre), Nalm-6 and the no-template control (H2O) are included. Triangles above the transgene schemes represent primer positions (IgA2-B41-F1 and 104-B41-R1 for green, and 104-B23-F1 and IgA2-B23-R1 for red).
To confirm deletion or duplication, we sorted and cloned GFP- and DsRed-positive populations. Among 12 GFP-only clones, 11 clones revealed similar GFP intensity (comparable to post 1, 2 in Fig. 4A bottom), while 1 (post 3) showed higher GFP expression. Profiles of the two DsRed-only clones (post 4, 5) were similar. PCR analysis of genomic DNA of these clones using deletion- or duplication-specific primers produced consistent results, except for the post 3 clone (Fig. 4B), which retained the neomycin-resistant gene that was detected by sequencing the PCR products. Therefore, Cre-mediated excision of drug markers was efficient but incomplete. Culture of DsRed-positive cells in the presence of OHT generated GFP-positive cells, but not vice versa (Fig. 4A, lower right). This observation is consistent with our interpretation that DsRed expression represents cells with inter-loxP duplication.
Two clones determined to be mixed (NSK72 and NSK141) by FISH analysis using Site1 and Site2 probes (Table 1) were excluded from the following studies, because these clones may be a mixture of cis- and trans-targeted clones. However, such a mixed pattern can be explained by cross-hybridization between Site1 and Site2, because identical sequence blocks occupy 29% and 38% of Site1 and Site2 probes, respectively.
Application to assessment of proximity between gene loci
In somatic cells of fly, homologue pairing (a phenomenon in which paternal and maternal chromosomes spatially align) was demonstrated by Flp-FRT-mediated chromosomal recombination [18]. This observation suggests that recombination frequency can be an indicator of proximity between two loci. Similar approach by Cre-loxP system has been applied in the yeast chromosome [19]. Frequency of Cre-loxP-mediated long-range recombination was shown to decrease with an increase in the inter-loxP distance in fly [17] and in mouse embryonic stem cells [6]. To reproduce these results in human cells, we inserted Site2 into Site1-pre-integrated chromosome 14 at intervals of 1.1, 6.1, 10.5 and 39.8 Mb (Fig. 5A). In this experiment, NSB1 cells with Site1 integration at IGHA2 (106.06 Mb on the chromosome 14 coordinate of the reference human genome build 37.1) were used again. The Site2-targeted loci are located at an intergenic region between LOC122631 and C14orf180 (104.94 Mb) for 1.1-Mb interval; an intron of CCDC85C (99.99 Mb) for 6.1-Mb interval; DICER1 (95.57 Mb) for 10.5-Mb interval; and an intergenic region between FUT8 and NCOA4P (66.30 Mb) for 39.8-Mb interval. For inversion to occur, Site2 was oriented in a direction opposite to Site1. This is because cell lethality by deletions of large DNA segments might obscure the Cre recombination frequency [6].
A, Scheme of chromosome 14 after cis targeting with the indicated Site1–Site2 intervals. B, FISH analyses of representative two cis-targeted (NSC27 and NSC71) and two trans-targeted clones (NSC94 and NSC169) are shown. The chromosomes 14 with Site1 and Site2 integration harbor green and red signals, respectively, and are highlighted with boxes, magnifications of which are shown in insets.
In case of the 1.1-Mb interval (NSC cells), six clones were confirmed to be correctly targeted by Southern blotting (Fig. S6). After 7 days of culture in the presence of OHT, these clones were classified into two groups in terms of frequency of double-positive cells: high group [(9.4±1.1)×10−3; n = 3] and low group [(8.7±1.0)×10−5; n = 3]. FISH analysis using Site1 and Site2 probes revealed that high- and low-group clones were cis- and trans-targeted, respectively (Fig. 5B, Table 2), which also allowed us to classify the high and low groups as cis and trans groups, respectively, for cells with other Site1–Site2 intervals. In case of the 6.1-Mb interval (Fig. S7), the frequency of double-positive cells after 7 days of OHT stimulation was significantly lower than that seen with the 1.1-Mb interval: (1.2±0.6)×10−3 (cis, n = 4) and (3.0±1.7)×10−5 (trans, n = 8). Likewise, the targeted clones of 10.5- and 39.8-Mb intervals (Fig. S8 and Fig. S9) resulted in further decreasing frequencies: (6.5±3.5)×10−4 and (1.6±0.8)×10−5 (cis, n = 4 and trans, n = 3) for 10.5 Mb and (1.2±0.3)×10−4 and (8.9±5.9)×10−6 (cis, n = 4 and trans, n = 7) for 39.8 Mb.
Plotting the frequencies of recombination versus different loxP intervals indicated good linearity (Fig. 6A, 6B-i), suggesting that the intrachromosomal recombination frequency is inversely proportional to the distance between recombination sites. This result is strikingly similar to a result in fly [17] and is consistent with reported observation by Hi-C method and prediction by the fractal globule model of chromatin organization [20]. However, the linearity reduced with an increase in Cre expression provided by a retroviral vector (Fig. 7) probably because multiple inversions underestimate the real recombination frequency higher than 2%. Cre expression in representative clones for each Site1-Site2 interval was augmented by infecting cells with Cre-expressing retrovirus. Retroviral Cre protein but not that of MerCreMer was detected using anti-Cre antibody (Fig. 7, upper panel), while MerCreMer was detected in the presence of OHT by anti-estrogen receptor α antibody. This result indicated that the expression level of retroviral Cre was higher than that of MerCreMer expressed from plasmid transgene.
A, Plots of physical distance in the chromosome on the x axis and frequency of recombination on the y axis for cis- and trans-targeted cells. B, Outcome of inter-loxP recombination in cis- and trans-targeted cells.
A, Representative clones for each loxP interval (NSC27 for 1.1 Mb, NSF331 for 6.1 Mb, NSG118 for 10.5 Mb, and NSI95 for 39.8 Mb) were infected with a retrovirus expressing nuclear localization signal (NLS)-tagged Cre and puromycin-resistance gene. Simultaneously, tamoxifen (OHT) was added to activate MerCreMer. One day after infection, 0.25 µg/ml puromycin was added to select infected cells. Retrovirally Cre-transduced cells (open diamond) were analyzed by flow cytometry on day 11 to measure the frequency of fluorescence-positive cells. As a control, non-infected cells (red circle) were stimulated with OHT. B, Western blotting for retrovirally transduced Cre and MerCreMer proteins in NSC27 and NSMyc23 cells, the latter of which is clone #23 used for MYC/IgH translocation induction (Fig. 2B–D and Fig. S2). Retrovirus-infected cells were maintained in the presence of puromycin more than two weeks before lysate preparation.
Sister chromatid recombination in cis-targeted cells can also lead to cell death associated with dicentric (two-centromere) and acentric (no-centromere) chromosomes (Fig. 6B-ii), which might be another reason for the reduced linearity under high Cre activity. Unexpectedly, the trans group also exhibited a decreasing trend according to increasing inter-loxP distance (Fig. 6A). In the case of trans targeting, recombination results in formation of dicentric and acentric chromosomes, leading to cell death (Fig. 6B-iii). The decreasing trend of the trans group could be due to accelerated cell death with longer intervals or homologue pairing as previously observed in fly [18] and yeast [19]. Limited survival of those cells was depicted by the disappearance of the double-positive cells induced by OHT-treatment of trans-targeted NSC cells after removal of OHT (Fig. 8A), indicating poor survival of these cells presumably by formation of dicentric and acentric chromosomes (Fig. 6B-iii). In contrast, the double positive cells induced from the cis group of NSC cells (Fig. 8B) and those from the NSK cells with loxP sites in the same orientation (Fig. 8C for the trans group, Fig. 8D for the cis group) survived after removal of OHT. This experiment indicates that our system can be applied to studies of spatial organization of the mammalian genome based on an easy and rapid flow-cytometric determination of recombination frequencies.
Seven days after NSC and NSK cells were stimulated with OHT to activate MerCreMer, the culture was split into two: one with continued Cre activation (square) and the other without OHT to terminate Cre activation (triangle). Frequencies of fluorescence-positive cells at the indicated time points were measured by flow cytometry and plotted for NSC (inverted loxP sites with a 1.1-Mb interval) trans-targeted cells (A) and cis-targeted cells (B), and NSK (direct loxP sites with a 1.1-Mb interval) trans-targeted cells (C) and cis-targeted cells (D).
In this study, we demonstrated the use of our novel system in studying artificial chromosomal translocation, duplication, deletion, and inversion as well as in determining gene proximity in a human cell line. At the same time, this system may be useful for screening of recessive mutations [5] and induction of specific chromosomal loss [21] in cell lines or animal models. The applications to cell lineage tracing and neural connection analysis in animals may also be possible, taking advantage of infrequent recombination between loxP sites introduced at identical locations on homologous chromosomes [11]. The technical improvements reported here will facilitate mammalian chromosome engineering and better understanding of human diseases caused by chromosomal translocations and CNV.
Materials and Methods
Constructs
Procedures for construction of Site1 and Site2 targeting vectors are described in Methods S1 including Fig. S10, Fig. S11 and Table S1. pANMerCreMer-zeo was constructed by inserting a blunt 1437-bp ClaI-BstPI fragment from pVgRXR (Invitrogen, Carlsbad, CA), containing a zeocin-resistance gene in place of the AatII-SacI neomycin-resistance gene segment of pANMerCreMer-neo [14]. The Flp expression vector pCAGGS-FLPe was purchased (Gene Bridges, Dresden, Germany). A retroviral vector expression Cre, pCre-FBP, was constructed by inserting into pFB vector (Stratagene, La Jolla, CA) a coding sequence of Cre amino-terminally tagged with nuclear localization signal [22] connected with a DNA segment consisting of internal ribosome entry site and puromycin-resistance gene.
Cell culture, transfection and gene targeting
Nalm-6 cells and derivatives were maintained in ES medium (Nissui, Tokyo, Japan) supplemented with 10% fetal bovine serum, 1× GlutaMAX (Invitrogen) and 50 µM 2-mercaptoethanol. Two micrograms of ScaI-linearized pANMerCreMer-zeo was electroporated into 2×106 Nalm-6 cells using Nucleofector II (Amaxa, Köln, Germany) with Solution T and Program C-005. One of the zeocin-resistant clones with OHT-dependent Cre activity assessed by transient expression of the test substrate was designated as NCR1 to be used in subsequent experiments. The Site1 and Site2 targeting vectors were linearized by one of the enzymes within the multiple linearization sites and introduced into NCR1 and Site1-targeted NCR1, respectively, using Nucleofector II. Drug-resistant colonies were first screened by real-time SYBR-Green PCR with Mx3000P (Stratagene) using genomic DNA isolated by FTA card (Whatman, Kent, UK) as templates. The specific PCR products were detected by a dissociation curve analysis, taking advantage of the fact that the melting temperature of specific PCR products that are ≥2 kb is significantly higher than that of non-specific products including primer dimers. The polymerase was selected from among PrimeSTAR HS, LA Taq HS (Takara, Otsu, Japan), KOD FX (Toyobo, Osaka, Japan) and Phusion (Finnzyme, Espoo, Finland) for the best efficiency and specificity upon amplification using positive control CF and negative control Nalm-6 DNA. Products with melting temperatures similar to CF were almost always had the expected size upon 1% agarose-gel electrophoresis. Positive clones were examined by Southern blotting using upstream, internal and downstream probes labelled with the AlkPhos Direct kit (GE Healthcare, Piscataway, NJ). Detection was performed following 30 min of exposure to LAS-3000 mini cool-CCD camera (Fuji, Tokyo, Japan). Transient expression of pCAGGS-FLPe was obtained using Nucleofector II.
Fluorescence in situ hybridization
We performed two-color FISH analysis using two BAC clones RP11-953L20 (located centromeric to the IgH gene; SpectrumGreen-labeled) and RP11-55J15 (located telomeric to the MYC gene; SpectrumOrange-labeled). Labeling reaction was done using Nick Translation Kit (Abbott Molecular Inc., Des Plaines, IL) and SpectrumGreen- and SpectrumOrange-labeled deoxyuridine triphosphate (Abbott Molecular Inc.). For discrimination of cis and trans targeting, we used PCR-amplified Site1 (3.8 kb) and Site2 (2.9 kb) probes labelled with SpectrumGreen and SpectrumOrange, respectively. Images were taken with the fluorescence microscope MD5000B (Leica, Wetzlar, Germany), equipped with a cool charge-coupled device camera ORCA-ER (Hamamatsu Photonics, Hamamatsu, Japan) and iVision-Mac software (BioVision Technologies, Exton, PA). For spectral karyotyping of BCR/ABL1 translocation, hybridization was done using a SKYPaint kit (Applied Spectral Imaging, Vista, CA) and detected by SD-200 (Applied Spectral Imaging).
Induction of recombination and flow cytometry
After double targeting, 100,000 Nalm-6 cells were inoculated in 1 ml of medium with or without 1 µM OHT (day 0). On day 3, 0.5 ml of cells was diluted to 5 ml while maintaining OHT concentrations. Flow-cytometric analyses were performed by FACSCalibur (Becton Dickinson, Franklin Lakes, NJ) on day 7 in most cases. In some cases, this was done on day 11 or later, in which case the cells were diluted 10 times every 3 to 4 days. The frequencies of fluorescence-positive cells were then calculated from data acquired for one million cells using CellQuest software (Becton Dickinson). When OHT-stimulated cells were to be sorted, culture volume was doubled. Sorting was performed using FACSCalibur.
Western blotting
We performed western blot analysis for the BCR-ABL1 fusion protein using mouse monoclonal antibody against c-Abl [c-Abl(24-11); Santa Cruz, Santa Cruz, CA] or GAPDH (6C1, Millipore, Billerica, MA) and IR Dye800CW-labelled anti-mouse IgG (Li-cor, Lincoln, NE) and detected the proteins using a Odyssey scanner (Li-cor). Cre was detected using mouse monoclonal antibody (7.23; Abcam, Cambridge, MA) and IRDye680CW-labelled anti-mouse IgG (Li-cor). MerCreMer was detected with rabbit polyclonal anti-human estrogen receptor α antibody (sc-543, Santa Cruz) and IR Dye800CW-labelled anti-rabbit IgG (Li-cor). Antibody incubation was 10 min at room temperature using the SNAPi.d. Protein Detection System (Millipore).
Supporting Information
Methods S1.
Construction of Site1 and Site2 targeting vector.
https://doi.org/10.1371/journal.pone.0009846.s001
(0.03 MB RTF)
Table S1.
Oligonucleotide sequences. “P-” indicates 5′ phosphorylation. PCR enzymes used to amplifiy DNA fragments are shown. Blue letters indicate relevant ristriction sites. Green letters indicate SV40 small-t intronic sequence. Red letters indicate att site sequences.
https://doi.org/10.1371/journal.pone.0009846.s002
(0.04 MB XLS)
Figure S1.
Gene targeting strategy for IGHA2 locus and screening summary. A, Structure of the IGHA2 loci encoding the constant region of IgA2 before and after targeting (upper panel) and expected band sizes on the Southern blot (table). Rectangles indicate exons and the oval shape indicates the switch region of the IGHA2 locus (Sα 2). Exon numbers are indicated in white. Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blotting using the indicated enzymes and probes. Due to high homology between the IGHA2 and the IGHA1 loci encoding IgA1, expected signals from both loci are shown for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for representative five clones (#138, #148, #159, #201 and #209). Genomic DNA of these clones and their subclones (1–3) with parental NCR1 cells were analyzed. Outermost lanes of each panel were loaded with a size marker. The expected positions of WT and KO alleles are shown by arrowheads. The PvuII fragments detected by the upstream probe from the IGHA1 locus showed allelic polymorphism, and are tentatively designated a and b alleles. The longer a allele appeared to lose an upstream PvuII site in the allele b fragment. C, Summary of clone numbers is indicated. Subclone 1 of clone #159 was designated NSB1, which was subsequently targeted in all experiments except induction of BCR/ABL1 translocation.
https://doi.org/10.1371/journal.pone.0009846.s003
(1.83 MB TIF)
Figure S2.
Gene targeting strategy for MYC locus and screening summary. A, Structure of the MYC loci before and after targeting (upper panel) and expected band sizes on the Southern blot (table). Rectangles indicate exons of the MYC gene. Exon numbers are indicated in white. Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blot obtained using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for eight clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s004
(2.78 MB TIF)
Figure S3.
Gene targeting strategy for BCR locus and screening summary. A, Structure of the BCR loci before and after targeting (upper panel) and expected band sizes on the Southern blot (table). Rectangles indicate exons of the BCR gene. Exon numbers are indicated in white. Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 14 clones and parental NCR1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. Clone #177 (NSE177) was subsequently targeted with an ABL1-targeting vector. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s005
(1.20 MB TIF)
Figure S4.
Gene targeting strategy for ABL1 locus and screening summary. A, Structure of the ABL1 loci before and after targeting (upper panel) and expected band sizes on the Southern blot (table). Rectangles indicate exons of the ABL1 gene. Exon numbers are indicated in white. Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 10 clones and parental NSE177 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s006
(2.81 MB TIF)
Figure S5.
Gene targeting strategy for 104 locus for deletion/duplication and screening summary. A, EcoRI restriction map of a region at 104 Mb on the coordinate of chromosome 14, 1.1 Mb centromeric to the IGHA2 loci (upper panel), and expected band sizes on the Southern blot (table). Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 14 (NSK) clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. Two extra bands on the upstream probe blot indicated by open arrowheads and asterisks appeared to be derived from a highly homologous sequence on chromosome 13. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s007
(1.94 MB TIF)
Figure S6.
Gene targeting strategy for 104 locus for inversion and screening summary. A, EcoRI restriction map of a region at 104 Mb on the coordinate of chromosome 14, 1.1 Mb centromeric to the IGHA2 loci (upper panel), and expected band sizes on the Southern blot (table). Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blotting using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 11 (NSC) clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s008
(1.86 MB TIF)
Figure S7.
Gene targeting strategy for 99 locus for inversion and screening summary. A, EcoRI restriction map of a region at 99 Mb on the coordinate of chromosome 14, 6.1 Mb centromeric to the IGHA2 loci (upper panel), and expected band sizes on the Southern blotting (table). Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 13 (NSF) clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s009
(1.95 MB TIF)
Figure S8.
Gene targeting strategy for 95 locus for inversion and screening summary. A, Restriction map of the DICER1 locus at 95 Mb on the coordinate of chromosome 14, 10.5 Mb centromeric to the IGHA2 loci (upper panel), and expected band sizes on the Southern blot (table). Rectangles indicate exons of the DICER1 gene. Some of exon numbers are indicated in white. Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 16 (NSG) clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s010
(2.94 MB TIF)
Figure S9.
Gene targeting strategy for 65 locus for inversion and screening summary. A, Restriction map of a region at 65 Mb on the coordinate of chromosome 14, 39.8 Mb centromeric to the IGHA2 loci (upper panel), and expected band sizes on the Southern blot (table). Regions of targeting homology are indicated by parallel dotted lines with in-between numbers depicting bp. Positions of DNA probes used for Southern blotting are indicated by thick blue (upstream), black (internal) and red (downstream) lines. Numbers with bp above bidirectional arrows represent the distance between relevant restriction sites. Primer positions for PCR screening are indicated by arrowheads. Unidirectional arrows indicate direction toward the centromere or the telomere. The table lists the expected sizes of bands on the Southern blot using the indicated enzymes and probes for wild-type (WT) and targeted (knockout, KO) alleles. B, Southern blot using the indicated enzymes and probes for 13 (NSI) clones and parental NSB1 cells. Outermost lanes of each panel were loaded with the size marker. Expected positions of WT and KO alleles are shown by arrowheads. C, Summary of clone numbers is indicated.
https://doi.org/10.1371/journal.pone.0009846.s011
(3.14 MB TIF)
Figure S10.
Construction scheme part 1. For details, see Methods S1.
https://doi.org/10.1371/journal.pone.0009846.s012
(0.61 MB TIF)
Figure S11.
Construction scheme part 2. For details, see Methods S1.
https://doi.org/10.1371/journal.pone.0009846.s013
(1.74 MB TIF)
Acknowledgments
We are grateful to R. Tsien and M. Reth for their generous gift of dimer2 and pANMerCreMer-neo plasmids, respectively. We thank H. Hiai and Z. Tao for critical reading of the manuscript. We also thank Y. Miwa, E. Sonoda, K. Shibahara, T. Toyoshima, F. Koizumi, Y. Hasegawa, K. Imaki and H. Ishizaka for their assistance.
Author Contributions
Conceived and designed the experiments: KK. Performed the experiments: MU YN NK KK. Analyzed the data: MU YN KK. Contributed reagents/materials/analysis tools: NK NA KK. Wrote the paper: KK.
References
- 1. Smith AJ, De Sousa MA, Kwabi-Addo B, Heppell-Parton A, Impey H, et al. (1995) A site-directed chromosomal translocation induced in embryonic stem cells by Cre-loxP recombination. Nat Genet 9: 376–385.
- 2. Ramirez-Solis R, Liu P, Bradley A (1995) Chromosome engineering in mice. Nature 378: 720–724.
- 3. Van Deursen J, Fornerod M, Van Rees B, Grosveld G (1995) Cre-mediated site-specific translocation between nonhomologous mouse chromosomes. Proc Natl Acad Sci U S A 92: 7376–7380.
- 4. Liu P, Zhang H, McLellan A, Vogel H, Bradley A (1998) Embryonic lethality and tumorigenesis caused by segmental aneuploidy on mouse chromosome 11. Genetics 150: 1155–1168.
- 5. Su H, Wang X, Bradley A (2000) Nested chromosomal deletions induced with retroviral vectors in mice. Nat Genet 24: 92–95.
- 6. Zheng B, Sage M, Sheppeard EA, Jurecic V, Bradley A (2000) Engineering mouse chromosomes with Cre-loxP: range, efficiency, and somatic applications. Mol Cell Biol 20: 648–655.
- 7. Smith AJ, Xian J, Richardson M, Johnstone KA, Rabbitts PH (2002) Cre-loxP chromosome engineering of a targeted deletion in the mouse corresponding to the 3p21.3 region of homozygous loss in human tumours. Oncogene 21: 4521–4529.
- 8. Wallace HA, Marques-Kranc F, Richardson M, Luna-Crespo F, Sharpe JA, et al. (2007) Manipulating the mouse genome to engineer precise functional syntenic replacements with human sequence. Cell 128: 197–209.
- 9. Hartley JL, Temple GF, Brasch MA (2000) DNA cloning using in vitro site-specific recombination. Genome Res 10: 1788–1795.
- 10. Campbell RE, Tour O, Palmer AE, Steinbach PA, Baird GS, et al. (2002) A monomeric red fluorescent protein. Proc Natl Acad Sci U S A 99: 7877–7882.
- 11. Zong H, Espinosa JS, Su HH, Muzumdar MD, Luo L (2005) Mosaic analysis with double markers in mice. Cell 121: 479–492.
- 12. Iiizumi S, Nomura Y, So S, Uegaki K, Aoki K, et al. (2006) Simple one-week method to construct gene-targeting vectors: application to production of human knockout cell lines. Biotechniques 41: 311–316.
- 13. Adachi N, So S, Iiizumi S, Nomura Y, Murai K, et al. (2006) The human pre-B cell line Nalm-6 is highly proficient in gene targeting by homologous recombination. DNA Cell Biol 25: 19–24.
- 14. Zhang Y, Wienands J, Zurn C, Reth M (1998) Induction of the antigen receptor expression on B lymphocytes results in rapid competence for signaling of SLP-65 and Syk. Embo J 17: 7304–7310.
- 15. Matsuzaki H, Nakajima R, Nishiyama J, Araki H, Oshima Y (1990) Chromosome engineering in Saccharomyces cerevisiae by using a site-specific recombination system of a yeast plasmid. J Bacteriol 172: 610–618.
- 16. Qin M, Bayley C, Stockton T, Ow DW (1994) Cre recombinase-mediated site-specific recombination between plant chromosomes. Proc Natl Acad Sci U S A 91: 1706–1710.
- 17. Golic KG, Golic MM (1996) Engineering the Drosophila genome: chromosome rearrangements by design. Genetics 144: 1693–1711.
- 18. Golic MM, Golic KG (1996) A quantitative measure of the mitotic pairing of alleles in Drosophila melanogaster and the influence of structural heterozygosity. Genetics 143: 385–400.
- 19. Burgess SM, Kleckner N (1999) Collisions between yeast chromosomal loci in vivo are governed by three layers of organization. Genes Dev 13: 1871–1883.
- 20. Lieberman-Aiden E, van Berkum NL, Williams L, Imakaev M, Ragoczy T, et al. (2009) Comprehensive mapping of long-range interactions reveals folding principles of the human genome. Science 326: 289–293.
- 21. Lewandoski M, Martin GR (1997) Cre-mediated chromosome loss in mice. Nat Genet 17: 223–225.
- 22. Gu H, Zou YR, Rajewsky K (1993) Independent control of immunoglobulin switch recombination at individual switch regions evidenced through Cre-loxP-mediated gene targeting. Cell 73: 1155–1164.
- 23. Hozier J, Lindquist L, Hurwitz R, LeBien T, Kersey J (1980) Evolution of cultured leukemic cell lines monitored by chromosomal and immunologic analysis. Int J Cancer 26: 281–284.