Generalized Magnetic Field Effects in Burgers' Nanofluid Model

Analysis has been conducted to present the generalized magnetic field effects on the flow of a Burgers' nanofluid over an inclined wall. Mathematical modelling for hydro-magnetics reveals that the term “σB02u/ρ” is for the Newtonian model whereas the generalized magnetic field term (as mentioned in Eq 4) is for the Burgers’ model which is incorporated in the current analysis to get the real insight of the problem for hydro-magnetics. Brownian motion and thermophoresis phenomenon are presented to analyze the nanofluidics for the non-Newtonian fluid. Mathematical analysis is completed in the presence of non-uniform heat generation/absorption. The constructed set of partial differential system is converted into coupled nonlinear ordinary differential system by employing the suitable transformations. Homotopy approach is employed to construct the analytical solutions which are shown graphically for sundr5y parameters including Deborah numbers, magnetic field, thermophoresis, Brownian motion and non-uniform heat generation/absorption. A comparative study is also presented showing the comparison of present results with an already published data.


Introduction
Analysis of non-Newtonian fluids is an active area of research for the last few years. Many industrial fluids including certain oils, shampoos, paints, cosmetic products, polymers, colloidal fluids, suspension fluids, ice cream etc. are characterize as the non-Newtonian fluids. The diverse rheological properties of the non-Newtonian fluids results into division namely the rate type (includes the Maxwell model, Jeffery model, Oldroyd model and the Burgers model etc), the differential type (includes the second grade model, third grade model etc) and the integral type (includes Sisko model etc.). The Burgers' fluid model has been proposed to predict the properties of relaxation and retardation effects simultaneously. Due to the complexities in terms mathematical modelling of the Burgers' fluid model, very little has been reported for the Burgers' model. For-instance Jamil and Fetecau [1] computed some exact solutions for rotating flows of a generalized Burgers' fluid in cylindrical domains. Authors have considered the fluid flow between two co-axial cylinders and employed the Laplace and Hankel transforms for the solutions procedure. A note on the longitudinal oscillations of a generalized Burgers fluid in cylindrical domains has been presented by Fetecau et al. [2]. Authors have presented a1111111111 a1111111111 a1111111111 a1111111111 a1111111111 the effects of longitudinal oscillations and established Fourier-Bessel series. An exact solution of start-up flow for the ractional generalized Burgers' fluid in a porous half space is presented by Xue et al. [3]. They have utilized the modified Darcy's law for the mathematical modelling in a porous medium and employed Fourier sine and fractional Laplace transform to compute the exact solution of the velocity distribution. Khan et al. [4] computed the exact solutions for some oscillating motions of a fractional Burgers' fluid. Authors have incorporated fractional calculus approach in the constitutive relationship model. The expressions for the velocity field and the resulting shear stress that have been presented. Similar solutions for generalized Oldroyd-B, Maxwell and second grade fluids can be computed as a limiting cases. Hydromagnetic flow and heat transfer of a generalized Burgers' fluid due to an exponentially accelerating plate with radiation effects has been analyzed by Liu et al. [5]. The authors have presented the flow over an exponentially accelerating wall. Exact solutions for the velocity and temperature field are presented in integral and series form in terms of the GG functions. Maryam et al. [6] presented the peristaltic flow of Burgers' fluid with complaint walls and heat transfer. Authors have studied a theoretical analysis to investigate the peristaltic flow and heat transfer characteristics of Burgers' fluid in a channel governed by the propagation of sinusoidal waves. Various plots are presented to discuss the considered rheology. Awais et al. [7] investigated the heat transfer in flow of Burgers' fluid during melting process. The two-dimensional flow equations are modeled and then simplified by employing boundary layer analysis. The solution to the arising nonlinear problem is computed and interpretation of various emerging parameters is given through graphs.
In the recent years, particles of nanometre-size (normally less than 100 nm proposed by Choi [8]) termed as nanofluid are utilized for dispersing in base liquids in order to enhance the thermal conductivity even at low solid concentrations. They are also very stable and have no additional problems such as erosion, additional pressure drop and the low volume fraction etc. The enhanced thermal behavior of nanofluids could provide a basis for an enormous innovation for heat transfer intensification, which is major importance to a number of industrial sectors including transportation, nuclear reactors, electronics as well as biomedicine and food. In view of these fact various recent researchers have made several investigation to study the nanofluid rheology in Newtonian and non-Newtonian fluids. For-instance Khan and Pop [9] presented the boundary-layer flow of a nanofluid past a stretching sheet. Authors have presented a similarity solution is presented which depends on the Prandtl number, Lewis number, Brownian motion number and thermophoresis number. Makinde and Aziz [10] studied the boundary layer flow of a nanofluid past a stretching sheet with a convective boundary conditions. They have extended the work of Ref. [9] for convective boundaries which are considered to be more generalized boundary conditions. Numerical study of the flow and heat transfer of a nanofluid over a stretching sheet has been analyzed by Rana and Bhargava [11]. They have analyzed the flow over a nonlinearly stretching surface and solved the considered problem using finite element method (FEM) with a local non-similar transformation. Hamad and Ferdows [12] presented the similarity solution of boundary layer stagnation-point flow towards a heated porous stretching sheet saturated with a nanofluid with heat absorption/generation and suction/blowing. They have utilized the Lie group theory to analyze the outcomes of the problem. Heat generation/absorption effects in a boundary layer stretched flow of Maxwell nanofluid has been analyzed by Awais et al. [13]. Authors have presented analytic and numeric solutions and presented several plots and numerical results to give the exact insight of the considered problem.
The purpose of the present analysis is to investigate further in the direction of nanofluids' rheology. Therefore we have studied the Burgers' nanofluid flow. Generalized magnetic field terms is presented for the over an inclined wall with non-uniform heat generation/absorption and gravitational effects. Mathematical modelling has been performed in the presence of applied magnetic field. It is noted that magnetic field term (which appear in the momentum equation) for rate type fluids is quite different then of differential type fluids. The governing nonlinear partial differential system is converted into system of coupled ordinary differential equations using appropriate transformations. The resulting equations are solved analytically by using HAM [14][15][16][17][18][19][20][21] and the obtained results are presented graphically. A comparative study with an already published data is presented showing the nice agreement in derived results. Some new published papers can be found in [22][23][24].

Mathematical Formulation
We considered the boundary layer flow of an incompressible Burgers' nanofluid over an inclined wall (makes an angle α with the vertical direction). Heat and mass transfer effects are considered combined with non-uniform internal heat generation/absorption phenomenon. Magnetic field B = {0,B 0 ,0} is applied along the transverse direction. A conducting wall undergoes stretching phenomenon with velocity U s (x) = cx, where c is a positive dimensional constant. The fundamental laws representing the mass and momentum conservation yield where an extra stress tensor in Burgers' fluid model satisfy In above equations (λ 1 , λ 2 ) are the relaxation effects and λ 3 is the retardation effect. It is pointed out here that for λ 2 = 0, the results for an Oldroyd-B fluid model can be deduced and for λ 2 = λ 3 = 0, one can achieve the results for an Maxwell fluid model. Moreover the results for the Newtonian fluid model can be obtained by setting λ 1 = λ 2 = λ 3 = 0. Making use of Eq 3 in Eq 2 we get Moreover the energy and mass fraction equations are Note that in above differential system u and v are the velocity components, ρ is the density of the fluid, σ is the electrical conductivity, g 0 is the acceleration due to gravity, α is the inclination of the wall, T is the temperature of the fluid, α m is the thermal diffusivity of ordinary fluid, D B is the Brownian motion coefficient, D T is the thermophoresis effect and " q is the non-uniform heat generated " q > 0 ð Þ or absorbed " q < 0 ð Þ per unit volume respectively. The mathematical expression for non-uniform heat source/sink is given by whereas the wall stretching velocity U s = cx, the wall surface temperature T s ¼ T 1 þ T ref The associated wall conditions are given by Making use of the following transformations Eq 1 is automatically satisfied and Eqs 4-6 yield along with the wall conditions where β 1 , β 2 and β 3 are the Deborah numbers, Pr is the Prandtl number, M is the Hartman number, N b is the Brownian motion phenomenon, N t is the thermophoresis effect, Sc is the Schmidt number and G is the mixed convection parameter. It is noted that G > 0 corresponds to assisting flow whereas G < 0 represents opposing flow situation. For G = 0 the results of forced convection phenomenon can be reproduced. Moreover A and B are the dimensionless coefficients of space and temperature dependent heat generation/absorption effects respectively. Note that for internal heat generation A > 0 and B > 0 whereas for internal heat absorption we have A < 0 and B < 0. These quantities are defined as The local Nusselt (Nu) and Sherwood (Sh) numbers have the following definitions in which q s and j s represent the surface heat flux and surface mass flux respectively. In dimensionless form Nu=Re 1=2 x ¼ À y 0 ð0Þ; Sh=Re 1=2 x ¼ À 0 0 ð0Þ: ð16Þ

Convergence Analysis
It is noted that the nonlinear Eqs 19-21 contain the supporting parameters ℏ f , ℏ θ and ℏ ϕ . These non-zero auxiliary parameters are very much useful in adjusting and controlling the convergence of the obtained solutions. In order to find the suitable domains we have plotted ℏ f -, ℏ θand ℏ ϕ -curves at 15 th order of approximation in the  Table 1 is prepared for the convergence of the series solutions. It is found that the convergence is achieved at 15 th order of approximations.

Results and Discussion
The aim of this section is to present the rheological and physical effects on the flow field. For this purpose we have prepared It is observed that magnetic field retards the flow and thinner the momentum boundary layer. Physically it is noted that when any fluid is subjected to a magnetic field then the apparent viscosity increases. The outcome of which is that the fluid's ability to transmit force can be controlled with the help of an electromagnet which gives rise to its many possible control-based applications including MHD power generation, electromagnetic casting of metals, MHD ion propulsion etc. Fig 8 presents the effects of inclination angle on the velocity profile. It is noted that angle α varies from 0−π/2. Angle α = 0 represents the case of vertical wall whereas α = π/2 represents the horizontal wall. We noticed that when α varies from 0−π/2 the    Table 2 presents a comparative study of the obtained results with those of Ref. [25]. It is noted that the present results in a limiting case are in a nice agreement with an already (Ref. [25]).

Concluding Remarks
In this paper, an analysis is presented for the two-dimensional boundary layer flow of Burgers' nanofluid over an inclined wall with non-uniform heat source/sink. The important observations are as follows: • Streamlines for Newtonian and Burger model are prepared which show the difference of rheology.
• Velocity field and momentum boundary layer are lessor for Burger model due to extra viscoelastic effects.